e-Leadership through strategic alignment: an empirical study of small and medium sized enterprises in the digital age

Small and medium sized enterprises (SMEs) play an important role in the European economy. A critical challenge faced by SME leaders, as a consequence of the continuing digital technology revolution, is how to optimally align business strategy with digital technology to fully leverage the potential offered by these technologies in pursuit of longevity and growth. There is a paucity of empirical research examining how e-leadership in SMEs drives successful alignment between business strategy and digital technology fostering longevity and growth. To address this gap, in this paper we develop an empirically derived e-leadership model. Initially we develop a theoretical model of e-leadership drawing on strategic alignment theory. This provides a theoretical foundation on how SMEs can harness digital technology in support of their business strategy enabling sustainable growth. An in-depth empirical study was undertaken interviewing 42 successful European SME leaders to validate, advance and substantiate our theoretically driven model. The outcome of the two stage process – inductive development of a theoretically driven e-leadership model and deductive advancement to develop a complete model through in-depth interviews with successful European SME leaders – is an e-leadership model with specific constructs fostering effective strategic alignment. The resulting diagnostic model enables SME decision makers to exercise effective e-leadership by creating productive alignment between business strategy and digital technology improving longevity and growth prospects.

Evaluating e-learning systems: an empirical investigation on students' perception in higher education area

In search of better, traditional learning universities have expanded their ways to deliver knowledge and integrate cost effective e-learning systems. Universities’ use of information and communication technologies has grown tremendously over the last decade. To ensure efficient use of the e-learning system, the Arab Open University (AOU) in Bahrain was the first to use e-learning system there, aimed to evaluate the good and bad practices, detect errors and determine areas for further improvements in usage. This study critically evaluated the students’ perception of the elearning system in Bahrain and recommended changes to improve students’ e-learning usage. Results of the study indicated that, in general, students have favourable perceptions toward using the e-learning system. This study has shown that technology acceptance is the most variable, factor that contributes to students’ perception and satisfaction of the e-learning system.

Ciprofibrate quantification in human plasma by high-performance liquid chromatography coupled with electrospray tandem mass spectrometry for pharmacokinetic studies

A rapid, sensitive and specific method for quantifying ciprofibrate in human plasma using bezafibrate as the internal standard (IS) is described. The sample was acidified prior extraction with formic acid (88%). The analyte and the IS were extracted from plasma by liquid-liquid extraction using an organic solvent (diethyl ether/dichloromethane 70/30 (v/v)). The extracts were analyzed by high performance liquid chromatography coupled with electrospray tandem mass spectrometry (HPLC-MS/MS). Chromatography was performed using Genesis C18 4 mu m analytical column (4.6 x 150 mm i.d.) and a mobile phase consisting of acetonitrile/water (70/30, v/v) and 1 mM acetic acid. The method had a chromatographic run time of 3.4 min and a linear calibration curve over the range 0.1-60 mu g/mL (r > 0.99). The limit of quantification was 0.1 mu g/mL. The intra- and interday accuracy and precision values of the assay were less than 13.5%. The stability tests indicated no significant degradation. The recovery of ciprofibrate was 81.2%, 73.3% and 76.2% for the 0.3, 5.0 and 48.0 ng/mL standard concentrations, respectively. For ciprofibrate, the optimized parameters of the declustering potential, collision energy and collision exit potential were -51 V, -16 eV and -5 V, respectively. The method was also validated without the use of the internal standard. This HPLC-MS/MS procedure was used to assess the bioequivalence of two ciprofibrate 100 mg tablet formulations in healthy volunteers of both sexes. The following pharmacokinetic parameters were obtained from the ciprofibrate plasma concentration vs. time curves: AUC(last), AUC(0-168 h), C(max) and T(max). The geometric mean with corresponding 90% confidence interval (CI) for test/reference percent ratios were 93.80% (90% CI = 88.16-99.79%) for C(max), 98.31% (90% CI = 94.91-101.83%) for AUC(last) and 97.67% (90% CI = 94.45-101.01%) for AUC(0-168 h). Since the 90% Cl for AUC(last), AUC(0-168 h) and C(max) ratios were within the 80-125% interval proposed by the US FDA, it was concluded that ciprofibrate (Lipless (R) 100 mg tablet) formulation manufactured by Biolab Sanus Farmaceutica Ltda. is bioequivalent to the Oroxadin (R) (100 mg tablet) formulation for both the rate and the extent of absorption. (C) 2011 Published by Elsevier B.V.

On the Use of Agents in a Bioinformatics Grid

MyGrid is an e-Science Grid project that aims to help biologists and bioinformaticians to perform workflow-based in silico experiments, and help them to automate the management of such workflows through personalisation, notification of change and publication of experiments. In this paper, we describe the architecture of myGrid and how it will be used by the scientist. We then show how myGrid can benefit from agents technologies. We have identified three key uses of agent technologies in myGrid: user agents, able to customize and personalise data, agent communication languages offering a generic and portable communication medium, and negotiation allowing multiple distributed entities to reach service level agreements.

Technology diffusion: analysing the diffusion of agent technologies

Despite several examples of deployed agent systems, there remain barriers to the large-scale adoption of agent technologies. In order to understand these barriers, this paper considers aspects of marketing theory which deal with diffusion of innovations and their relevance to the agents domain and the current state of diffusion of agent technologies. In particular, the paper examines the role of standards in the adoption of new technologies, describes the agent standards landscape, and compares the development and diffusion of agent technologies with that of object-oriented programming. The paper also reports on a simulation model developed in order to consider different trajectories for the adoption of agent technologies, with trajectories based on various assumptions regarding industry structure and the existence of competing technology standards. We present details of the simulation model and its assumptions, along with the results of the simulation exercises.

An entry strategy with innovation and differentiation in Brazil and the United States

With the global rise of credit and debit card usage, acquirers play an increasingly important role within the payments industry by processing these types of payment transactions on behalf of merchants. This study focuses on examining two markets – Brazil and the United States – by providing an overview of the market dynamics, the state of the competitive landscape, and the role and impact of regulations and new technologies. In considering these factors, strategic recommendations are provided for new players interested in enter either market. Further, factors such as existing and future opportunities as well as risks are considered.

Cenário de mudanças e implicações na transferência do conhecimento tácito: estudo de caso FMC Technologies do Brasil

O objetivo dessa dissertação é analisar o desafio da transferência de conhecimento no setor de tecnologia de Óleo e Gás, especificamente na empresa FMC Technologies do Brasil, e suas consequências no diferencial competitivo, ao compreender como se dá a transferência de conhecimento tácito dos especialistas para os novos colaboradores, que devido ao enorme crescimento do segmento são a maioria atualmente. O estudo de caso se dará pela observação participante do próprio autor no local de trabalho, abordagem de teoria analítica e consequente pesquisa qualitativa com colaboradores de diferentes áreas e tempos de serviço, a fim de qualificar observações, bem como entender como se estabelece este processo e fundamentalmente, como melhorá-lo e garantir sustentabilidade. Como resultado deste trabalho tivemos a validação dos especialistas como responsáveis pela transferência do conhecimento tácito dentro do ambiente e contexto capacitante criado desde a fundação da empresa CBV, o qual desdobra a estratégia através da inspiração na valorização do trabalho e sentimento de contribuição.

Mhealth entrepreneurship: an exploratory research for a managerial model for mhealth start ups in low and middle income countries

Since some years, mobile technologies in healthcare (mHealth) stand for the transformational force to improve health issues in low- and middle-income countries (LMICs). Although several studies have identified the prevailing issue of inconsistent evidence and new evaluation frameworks have been proposed, few have explored the role of entrepreneurship to create disruptive change in a traditionally conservative sector. I argue that improving the effectiveness of mHealth entrepreneurs might increase the adoption of mHealth solutions. Thus, this study aims at proposing a managerial model for the analysis of mHealth solutions from the entrepreneurial perspective in the context of LMICs. I identified the Khoja–Durrani–Scott (KDS) framework as theoretical basis for the managerial model, due to its explicit focus on the context of LMICs. In the subsequent exploratory research I, first, used semi-structured interviews with five specialists in mHealth, local healthcare systems and investment to identify necessary adaptations to the model. The findings of the interviews proposed that especially the economic theme had to be clarified and an additional entrepreneurial theme was necessary. Additionally, an evaluation questionnaire was proposed. In the second phase, I applied the questionnaire to five start-ups, operating in Brazil and Tanzania, and conducted semi-structured interviews with the entrepreneurs to gain practical insights for the theoretical development. Three of five entrepreneurs perceived that the results correlated with the entrepreneurs' expectations of the strengths and weaknesses of the start-ups. Main shortcomings of the model related to the ambiguity of some questions. In addition to the findings for the model, the results of the scores were analyzed. The analysis suggested that across the participating mHealth start-ups the ‘behavioral and socio-technical’ outcomes were the strongest and the ‘policy’ outcomes were the weakest themes. The managerial model integrates several perspectives, structured around the entrepreneur. In order to validate the model, future research may link the development of a start-up with the evolution of the scores in longitudinal case studies or large-scale tests.

Multilayer optimization in radio resource allocation for the packet transmission in wireless networks

In the last decade mobile wireless communications have witnessed an explosive growth in the user’s penetration rate and their widespread deployment around the globe. It is expected that this tendency will continue to increase with the convergence of fixed Internet wired networks with mobile ones and with the evolution to the full IP architecture paradigm. Therefore mobile wireless communications will be of paramount importance on the development of the information society of the near future. In particular a research topic of particular relevance in telecommunications nowadays is related to the design and implementation of mobile communication systems of 4th generation. 4G networks will be characterized by the support of multiple radio access technologies in a core network fully compliant with the Internet Protocol (all IP paradigm). Such networks will sustain the stringent quality of service (QoS) requirements and the expected high data rates from the type of multimedia applications to be available in the near future. The approach followed in the design and implementation of the mobile wireless networks of current generation (2G and 3G) has been the stratification of the architecture into a communication protocol model composed by a set of layers, in which each one encompasses some set of functionalities. In such protocol layered model, communications is only allowed between adjacent layers and through specific interface service points. This modular concept eases the implementation of new functionalities as the behaviour of each layer in the protocol stack is not affected by the others. However, the fact that lower layers in the protocol stack model do not utilize information available from upper layers, and vice versa, downgrades the performance achieved. This is particularly relevant if multiple antenna systems, in a MIMO (Multiple Input Multiple Output) configuration, are implemented. MIMO schemes introduce another degree of freedom for radio resource allocation: the space domain. Contrary to the time and frequency domains, radio resources mapped into the spatial domain cannot be assumed as completely orthogonal, due to the amount of interference resulting from users transmitting in the same frequency sub-channel and/or time slots but in different spatial beams. Therefore, the availability of information regarding the state of radio resources, from lower to upper layers, is of fundamental importance in the prosecution of the levels of QoS expected from those multimedia applications. In order to match applications requirements and the constraints of the mobile radio channel, in the last few years researches have proposed a new paradigm for the layered architecture for communications: the cross-layer design framework. In a general way, the cross-layer design paradigm refers to a protocol design in which the dependence between protocol layers is actively exploited, by breaking out the stringent rules which restrict the communication only between adjacent layers in the original reference model, and allowing direct interaction among different layers of the stack. An efficient management of the set of available radio resources demand for the implementation of efficient and low complexity packet schedulers which prioritize user’s transmissions according to inputs provided from lower as well as upper layers in the protocol stack, fully compliant with the cross-layer design paradigm. Specifically, efficiently designed packet schedulers for 4G networks should result in the maximization of the capacity available, through the consideration of the limitations imposed by the mobile radio channel and comply with the set of QoS requirements from the application layer. IEEE 802.16e standard, also named as Mobile WiMAX, seems to comply with the specifications of 4G mobile networks. The scalable architecture, low cost implementation and high data throughput, enable efficient data multiplexing and low data latency, which are attributes essential to enable broadband data services. Also, the connection oriented approach of Its medium access layer is fully compliant with the quality of service demands from such applications. Therefore, Mobile WiMAX seems to be a promising 4G mobile wireless networks candidate. In this thesis it is proposed the investigation, design and implementation of packet scheduling algorithms for the efficient management of the set of available radio resources, in time, frequency and spatial domains of the Mobile WiMAX networks. The proposed algorithms combine input metrics from physical layer and QoS requirements from upper layers, according to the crosslayer design paradigm. Proposed schedulers are evaluated by means of system level simulations, conducted in a system level simulation platform implementing the physical and medium access control layers of the IEEE802.16e standard.

The benefits of ethanol use for hydrogen production in urban transportation

The purpose of this paper is to describe the benefits of sugar cane ethanol in Brazil, appointing the productivity of this type of fuel based on hectares of plantation, its carbon dioxide cycle and the contribution to reduce the greenhouse effect. In the following step the uses of ethanol for hydrogen production by steam reforming is analyzed and some comparison with natural gas steam reforming is performed. The sugar cane industry in Brazil, in a near future, in the hydrogen era, could be modified according to our purpose, since besides the production of sugar, and ethylic and anhydric alcohol, Brazilian sugar cane industry will also be able to produce biohydrogen.Fuel cells appear like a promising technology for energy generation. Among several technologies in the present, the PEMFC (proton exchange membrane fuel cell) is the most appropriate for vehicles application, because it combines durability, high power density, high efficiency, good response and it works at relatively low temperatures. Besides that it is easy to turn it on and off and it is able to support present vibration in vehicles. A PEMFC's problem is the need of noble catalysts like platinum. Another problem is that CO needs to be in low concentration, requiring a more clean hydrogen to avoid fuel cell deterioration.One part of this paper was developed in Stockholm, where there are some buses within the CUTE (clean urban transport for Europe) project that has been in operation with FC since January 2004. Another part was developed in Guaratingueta, Brazil. Brazil intends to start up a program of FC buses. As conclusion, this paper shows the economical analysis comparing buses moved by fuel cells using hydrogen by different kinds of production. Electrolyze with wind turbine, natural gas steam reforming and ethanol steam reforming. (C) 2009 Elsevier Ltd. All rights reserved.

Estimation of outcrossing rate in a breeding population of Eucalyptus urophylla with dominant RAPD and AFLP markers

Eucalyptus breeding is typically conducted by selection in open-pollinated progenies. As mating is controlled only on the female side of the cross, knowledge of outcrossing versus selling rates is essential for maintaining adequate levels of genetic variability for continuous gains. Outcrossing rate in an open-pollinated breeding population of Eucalyptus urophylla was estimated by two PCR-based dominant marker technologies, RAPD and AFLP, using 11 open-pollinated progeny arrays of 24 individuals. Estimated outcrossing rates indicate predominant outcrossing and suggest maintenance of adequate genetic variability within families. The multilcous outcrossing rate (t(m)) estimated from RAPD markers (0.93 +/- 0.027), although in the same range, was higher (alpha > 0.01) than the estimate based on AFLP (0.89 +/- 0.033). Both estimates were of similar magnitude to those estimated for natural populations using isozymes. The estimated Wright's fixation index was lower than expected based on t, possibly resulting from selection against selfed seedlings when sampling plants for the study. An empirical analysis suggests that 18 is the minimum number of dominant marker loci necessary to achieve robust estimates of t,. This study demonstrates the usefulness of dominant markers, both RAPD and AFLP, for estimating the outcrossing rate in breeding and natural populations of forest trees. We anticipate an increasing use of such PCR-based technologies in mating-system studies, in view of their high throughput and universality of the reagents, particularly for species where isozyme systems have not yet been optimized.

Active control in rotating machinery using magnetic actuators with linear matrix inequalities (LMI) approach

The recent years have seen the appearance of innovative system for acoustic and vibration attenuation, most of them integrating new actuator technologies. In this sense, the study of algorithms for active vibrations control in rotating machinery became an area of enormous interest, mainly due to countless demands of an optimal performance of mechanical systems in aircraft, aerospace and automotive structures. In this way, this paper presents an approach that is numerically verified for active vibration control in a rotor using Active Magnetic Bearings (AMB). The control design in a discrete state-space formulation is carried out through feedback technique and Linear Matrix Inequalities (LMI) approach. LMI is useful for system with uncertainties. The AMB uses electromagnetic forces to support a rotor without mechanical contact. By monitoring the position of the shaft and changing the dynamics of the system accordingly, the AMB keeps the rotor in a desired position. This unique feature has broadened for the applications of AMB and now they can be considered not only as a main support bearing in a machine but also as dampers for vibration control and force actuators. © 2009 Society for Experimental Mechanics Inc.

Regional perspectives on digital disaster management in Latin America and the Caribbean

Includes bibliography

Availability, collection and use of data on disability in the Caribbean subregion

Includes bibliography