Visual Dependency and Dizziness after Vestibular Neuritis

Symptomatic recovery after acute vestibular neuritis (VN) is variable, with around 50% of patients reporting long term vestibular symptoms; hence, it is essential to identify factors related to poor clinical outcome. Here we investigated whether excessive reliance on visual input for spatial orientation (visual dependence) was associated with long term vestibular symptoms following acute VN. Twenty-eight patients with VN and 25 normal control subjects were included. Patients were enrolled at least 6 months after acute illness. Recovery status was not a criterion for study entry, allowing recruitment of patients with a full range of persistent symptoms. We measured visual dependence with a laptop-based Rod-and-Disk Test and severity of symptoms with the Dizziness Handicap Inventory (DHI). The third of patients showing the worst clinical outcomes (mean DHI score 36–80) had significantly greater visual dependence than normal subjects (6.35° error vs. 3.39° respectively, p = 0.03). Asymptomatic patients and those with minor residual symptoms did not differ from controls. Visual dependence was associated with high levels of persistent vestibular symptoms after acute VN. Over-reliance on visual information for spatial orientation is one characteristic of poorly recovered vestibular neuritis patients. The finding may be clinically useful given that visual dependence may be modified through rehabilitation desensitization techniques.

Quantitative evaluation of visual function 12 months after bilateral implantation of a diffractive trifocal IOL

PURPOSE: To quantitatively evaluate visual function 12 months after bilateral implantation of the Physiol FineVision® trifocal intraocular lens (IOL) and to compare these results with those obtained in the first postoperative month. METHODS: In this prospective case series, 20 eyes of 10 consecutive patients were included. Monocular and binocular, uncorrected and corrected visual acuities (distance, near, and intermediate) were measured. Metrovision® was used to test contrast sensitivity under static and dynamic conditions, both in photopic and low-mesopic settings. The same software was used for pupillometry and glare evaluation. Motion, achromatic, and chromatic contrast discrimination were tested using 2 innovative psychophysical tests. A complete ophthalmologic examination was performed preoperatively and at 1, 3, 6, and 12 months postoperatively. Psychophysical tests were performed 1 month after surgery and repeated 12 months postoperatively. RESULTS: Final distance uncorrected visual acuity (VA) was 0.00 ± 0.08 and distance corrected VA was 0.00 ± 0.05 logMAR. Distance corrected near VA was 0.00 ± 0.09 and distance corrected intermediate VA was 0.00 ± 0.06 logMAR. Glare testing, pupillometry, contrast sensitivity, motion, and chromatic and achromatic contrast discrimination did not differ significantly between the first and last visit (p>0.05) or when compared to an age-matched control group (p>0.05). CONCLUSIONS: The Physiol FineVision® trifocal IOL provided satisfactory full range of vision and quality of vision parameters 12 months after surgery. Visual acuity and psychophysical tests did not vary significantly between the first and last visit.

Spatial and Temporal Variations in Airborne Ambrosia Pollen in Europe

Aim: The European Commission Cooperation in Science and Technology (COST) Action FA1203 “SMARTER” aims to make recommendations for the sustainable management of Ambrosia across Europe and for monitoring its efficiency and cost effectiveness. The goal of the present study is to provide a baseline for spatial and temporal variations in airborne Ambrosia pollen in Europe that can be used for the management and evaluation of this noxious plant . Location: The full range of Ambrosia artemisiifolia L. distribution over Europe (39oN-60oN; 2oW-45oE). Methods: Airborne Ambrosia pollen data for the principal flowering period of Ambrosia (August-September) recorded during a 10-year period (2004-2013) were obtained from 242 monitoring sites. The mean sum of daily average airborne Ambrosia pollen and the number of days that Ambrosia pollen was recorded in the air were analysed. The mean and Standard Deviation (SD) were calculated regardless of the number of years included in the study period, while trends are based on those time series with 8 or more years of data. Trends were considered significant at p < 0.05. Results: There were few significant trends in the magnitude and frequency of atmospheric Ambrosia pollen (only 8% for the mean sum of daily average Ambrosia pollen concentrations and 14% for the mean number of days Ambrosia pollen was recorded in the air). Main conclusions: The direction of any trends varied locally and reflect changes in sources of the pollen, either in size or in distance from the monitoring station. Pollen monitoring is important for providing an early warning of the expansion of this invasive and noxious plant.

New Library-curated Faculty Profile Platform Launches Through bepress

As faculty needs evolve and become increasingly digital, libraries are feeling the pressure to provide relevant new services. At the same time, faculty members are struggling to create and maintain their professional reputations online. We at bepress are happy to announce the new SelectedWorks, the fully hosted, library-curated faculty profile platform that positions the library to better support faculty as well as the institution at large. Beverly Lysobey, Digital Commons and Resource Management Librarian, at Sacred Heart University, says: “Both faculty and administration have been impressed with the services we provide through SelectedWorks; we’re able to show how much our faculty really publishes, and it’s great for professors to get that recognition. We’ve had several faculty members approach us for help making sure their record was complete when they were up for tenure, and we’ve even found articles that authors themselves no longer had access to.” With consistent, organized, institution-branded profiles, SelectedWorks increases campus-wide exposure and supports the research mission of the university. As the only profile platform integrated with the fully hosted Digital Commons suite of publishing and repository services, it also ensures that the institution retains management of its content. Powerful integration with the Digital Commons platform lets the home institution more fully capture the range of scholarship produced on campus, and hosted services facilitate resource consolidation and reduces strain on IT. The new SelectedWorks features a modern, streamlined design that provides compelling display options for the full range of faculty work. It beautifully showcases streaming media, images, data, teaching materials, books – any type of content that researchers now produce as part of their scholarship. Detailed analytics tools let authors and librarians measure global readership and track impact for a variety of campus stakeholders: authors can see the universities, agencies, and businesses that are reading their work, and can easily export reports to use in tenure and promotion dossiers. Janelle Wertzbeger, Assistant Dean and Director of Scholarly Communications at Gettysburg College’s Musselman Library, says, “The new author dashboard maps and enhanced readership are SO GOOD. Every professor up for promotion & tenure should use them!” And of course, SelectedWorks is fully backed by the continual efforts of the bepress development team to provide maximum discoverability to search engines, increasing impact for faculty and institutions alike: Reverend Edward R. Udovic, Vice President for Teaching and Learning Resources at DePaul University, says, “In the last several months downloads of my scholarship from my [SelectedWorks] site have far surpassed the total distribution of all my work in the previous twenty five years.”

Quantitative evaluation of visual function 12 months after bilateral implantation of a diffractive trifocal IOL

PURPOSE: To quantitatively evaluate visual function 12 months after bilateral implantation of the Physiol FineVision® trifocal intraocular lens (IOL) and to compare these results with those obtained in the first postoperative month. METHODS: In this prospective case series, 20 eyes of 10 consecutive patients were included. Monocular and binocular, uncorrected and corrected visual acuities (distance, near, and intermediate) were measured. Metrovision® was used to test contrast sensitivity under static and dynamic conditions, both in photopic and low-mesopic settings. The same software was used for pupillometry and glare evaluation. Motion, achromatic, and chromatic contrast discrimination were tested using 2 innovative psychophysical tests. A complete ophthalmologic examination was performed preoperatively and at 1, 3, 6, and 12 months postoperatively. Psychophysical tests were performed 1 month after surgery and repeated 12 months postoperatively. RESULTS: Final distance uncorrected visual acuity (VA) was 0.00 ± 0.08 and distance corrected VA was 0.00 ± 0.05 logMAR. Distance corrected near VA was 0.00 ± 0.09 and distance corrected intermediate VA was 0.00 ± 0.06 logMAR. Glare testing, pupillometry, contrast sensitivity, motion, and chromatic and achromatic contrast discrimination did not differ significantly between the first and last visit (p>0.05) or when compared to an age-matched control group (p>0.05). CONCLUSIONS: The Physiol FineVision® trifocal IOL provided satisfactory full range of vision and quality of vision parameters 12 months after surgery. Visual acuity and psychophysical tests did not vary significantly between the first and last visit.

Long distance coupling of a quantum mechanical oscillator to the internal states of an atomic ensemble

We propose and investigate a hybrid optomechanical system consisting of a micro-mechanical oscillator coupled to the internal states of a distant ensemble of atoms. The interaction between the systems is mediated by a light field which allows the coupling of the two systems in a modular way over long distances. Coupling to internal degrees of freedom of atoms opens up the possibility to employ high-frequency mechanical resonators in the MHz to GHz regime, such as optomechanical crystal structures, and to benefit from the rich toolbox of quantum control over internal atomic states. Previous schemes involving atomic motional states are rather limited in both of these aspects. We derive a full quantum model for the effective coupling including the main sources of decoherence. As an application we show that sympathetic ground-state cooling and strong coupling between the two systems is possible.

Variational ensemble Kalman filtering applied to data assimilation problems in computational fluid dynamics

One challenge on data assimilation (DA) methods is how the error covariance for the model state is computed. Ensemble methods have been proposed for producing error covariance estimates, as error is propagated in time using the non-linear model. Variational methods, on the other hand, use the concepts of control theory, whereby the state estimate is optimized from both the background and the measurements. Numerical optimization schemes are applied which solve the problem of memory storage and huge matrix inversion needed by classical Kalman filter methods. Variational Ensemble Kalman filter (VEnKF), as a method inspired the Variational Kalman Filter (VKF), enjoys the benefits from both ensemble methods and variational methods. It avoids filter inbreeding problems which emerge when the ensemble spread underestimates the true error covariance. In VEnKF this is tackled by resampling the ensemble every time measurements are available. One advantage of VEnKF over VKF is that it needs neither tangent linear code nor adjoint code. In this thesis, VEnKF has been applied to a two-dimensional shallow water model simulating a dam-break experiment. The model is a public code with water height measurements recorded in seven stations along the 21:2 m long 1:4 m wide flume’s mid-line. Because the data were too sparse to assimilate the 30 171 model state vector, we chose to interpolate the data both in time and in space. The results of the assimilation were compared with that of a pure simulation. We have found that the results revealed by the VEnKF were more realistic, without numerical artifacts present in the pure simulation. Creating a wrapper code for a model and DA scheme might be challenging, especially when the two were designed independently or are poorly documented. In this thesis we have presented a non-intrusive approach of coupling the model and a DA scheme. An external program is used to send and receive information between the model and DA procedure using files. The advantage of this method is that the model code changes needed are minimal, only a few lines which facilitate input and output. Apart from being simple to coupling, the approach can be employed even if the two were written in different programming languages, because the communication is not through code. The non-intrusive approach is made to accommodate parallel computing by just telling the control program to wait until all the processes have ended before the DA procedure is invoked. It is worth mentioning the overhead increase caused by the approach, as at every assimilation cycle both the model and the DA procedure have to be initialized. Nonetheless, the method can be an ideal approach for a benchmark platform in testing DA methods. The non-intrusive VEnKF has been applied to a multi-purpose hydrodynamic model COHERENS to assimilate Total Suspended Matter (TSM) in lake Säkylän Pyhäjärvi. The lake has an area of 154 km2 with an average depth of 5:4 m. Turbidity and chlorophyll-a concentrations from MERIS satellite images for 7 days between May 16 and July 6 2009 were available. The effect of the organic matter has been computationally eliminated to obtain TSM data. Because of computational demands from both COHERENS and VEnKF, we have chosen to use 1 km grid resolution. The results of the VEnKF have been compared with the measurements recorded at an automatic station located at the North-Western part of the lake. However, due to TSM data sparsity in both time and space, it could not be well matched. The use of multiple automatic stations with real time data is important to elude the time sparsity problem. With DA, this will help in better understanding the environmental hazard variables for instance. We have found that using a very high ensemble size does not necessarily improve the results, because there is a limit whereby additional ensemble members add very little to the performance. Successful implementation of the non-intrusive VEnKF and the ensemble size limit for performance leads to an emerging area of Reduced Order Modeling (ROM). To save computational resources, running full-blown model in ROM is avoided. When the ROM is applied with the non-intrusive DA approach, it might result in a cheaper algorithm that will relax computation challenges existing in the field of modelling and DA.

FLOW REGIME DRIVEN THERMAL ENHANCEMENT IN INTERNALLY-GROOVED TUBES

Internally-grooved refrigeration tubes maximize tube-side evaporative heat transfer rates and have been identified as a most promising technology for integration into compact cold plates. Unfortunately, the absence of phenomenological insights and physical models hinders the extrapolation of grooved-tube performance to new applications. The success of regime-based heat transfer correlations for smooth tubes has motivated the current effort to explore the relationship between flow regimes and enhanced heat transfer in internally-grooved tubes. In this thesis, a detailed analysis of smooth and internally-grooved tube data reveals that performance improvement in internally-grooved tubes at low-to-intermediate mass flux is a result of early flow regime transition. Based on this analysis, a new flow regime map and corresponding heat transfer coefficient correlation, which account for the increased wetted angle, turbulence, and Gregorig effects unique to internally-grooved tubes, were developed. A two-phase test facility was designed and fabricated to validate the newly-developed flow regime map and regime-based heat transfer coefficient correlation. As part of this setup, a non-intrusive optical technique was developed to study the dynamic nature of two-phase flows. It was found that different flow regimes result in unique temporally varying film thickness profiles. Using these profiles, quantitative flow regime identification measures were developed, including the ability to explain and quantify the more subtle transitions that exist between dominant flow regimes. Flow regime data, based on the newly-developed method, and heat transfer coefficient data, using infrared thermography, were collected for two-phase HFE-7100 flow in horizontal 2.62mm - 8.84mm diameter smooth and internally-grooved tubes with mass fluxes from 25-300 kg/m²s, heat fluxes from 4-56 kW/m², and vapor qualities approaching 1. In total, over 6500 combined data points for the adiabatic and diabatic smooth and internally-grooved tubes were acquired. Based on results from the experiments and a reinterpretation of data from independent researchers, it was established that heat transfer enhancement in internally-grooved tubes at low-to-intermediate mass flux is primarily due to early flow regime transition to Annular flow. The regime-based heat transfer coefficient outperformed empirical correlations from the literature, with mean and absolute deviations of 4.0% and 32% for the full range of data collected.

Quichua-Spanish language contact in Salcedo, Ecuador: revisiting media lengua syncretic language practices

The purpose of the current thesis is to develop a better understanding of the interaction between Spanish and Quichua in the Salcedo region and provide more information for the processes that might have given rise to Media Lengua, a ‘mixed’ language comprised of a Quichua grammar and Spanish lexicon. Muysken attributes the formation of Media Lengua to relexification, ruling out any influence from other bilingual phenomena. I argue that the only characteristic that distinguishes Media Lengua from other language contact varieties in central Ecuador is the quantity of the overall Spanish borrowings and not the type of processes that might have been employed by Quichua speakers during the genesis of Media Lengua. The results from the Salcedo data that I have collected show how processes such as adlexification, code-mixing, and structural convergence produce Media Lengua-type sentences, evidence that supports an alternative analysis to Muysken’s relexification hypothesis. Overall, this dissertation is developed around four main objectives: (1) to describe the variation of Spanish loanwords within a bilingual community in Salcedo; (2) to analyze some of the prominent and recent structural changes in Quichua and Spanish; (3) to determine whether Spanish loanword use can be explained by the relationship consultants have with particular social categories; and (4) to analyze the consultants’ language ideologies toward syncretic uses of Spanish and Quichua. Overall, 58% of the content words, 39% of the basic vocabulary, and 50% of the subject pronouns in the Salcedo corpus were derived from Spanish. When compared to Muysken’s description of highlander Quichua in the 1970’s, Spanish loanwords have more than doubled in each category. The overall level of Spanish loanwords in Salcedo Quichua has grown to a level between highlander Quichua in the 1970’s and Media Lengua. Similar to Spanish’s lexical influence in Media Lengua, the increase of Spanish borrowings in today’s rural Quichua can be seen in non-basic and basic vocabularies as well as the subject pronoun system. Significantly, most of the growth has occurred through forms of adlexification i.e., doublets, well-established borrowings, and cultural borrowings, suggesting that ‘ordinary’ lexical borrowing is also capable of producing Media Lengua-type sentences. I approach the second objective by investigating two separate phenomena related to structural convergence. The first examines the complex verbal constructions that have developed in Quichua through Spanish loan translations while the second describes the type of Quichua particles that are attached to Spanish lexemes while speaking Spanish. The calquing of the complex verbal constructions from Spanish were employed when speaking standard Quichua. Since this standard form is typically used by language purists, I argue that their use of calques is a strategy of exploiting the full range of expression from Spanish without incorporating any of the Spanish lexemes which would give the appearance of ‘contamination’. The use of Quichua particles in local varieties of Spanish is a defining characteristic of Quichuacized Spanish, spoken most frequently by women and young children in the community. Although the use of Quichua particles was probably not the main catalyst engendering Media Lengua, I argue that its contribution as a source language to other ‘mixed’ varieties, such as Media Lengua, needs to be accounted for in descriptions of BML genesis. Contrary to Muysken’s representation of relatively ‘unmixed’ Spanish and Quichua as the two source languages of Media Lengua, I propose that local varieties of Spanish might have already been ‘mixed’ to a large degree before Media Lengua was created. The third objective attempts to draw a relationship between particular social variables and the use of Spanish loanwords. Whisker Boxplots and ANOVAs were used to determine which social group, if any, have been introducing new Spanish borrowings into the bilingual communities in Salcedo. Specifically, I controlled for age, education, native language, urban migration, and gender. The results indicate that none of the groups in each of the five social variables indicate higher or lower loanword use. The implication of these results are twofold: (a) when lexical borrowing occurs, it is immediately adopted as the community-wide norm and spoken by members from different backgrounds and generations, or (b) this level of Spanish borrowing (58%) is not a recent phenomenon. The fourth and final objective draws on my ethnographic research that addresses the attitudes of syncretic language use. I observed that Quichuacized Spanish and Hispanicized Quichua are highly stigmatized varieties spoken by the country’s most marginalized populations and families, yet within the community, syncretic ways of speaking are in fact the norm. It was shown that there exists a range of different linguistic definitions for ‘Chaupi Lengua’ and other syncretic language practices as well as many contrasting connotations, most of which were negative. One theme that emerged from the interviews was that speaking syncretic varieties of Quichua weakened the consultant’s claim to an indigenous identity. The linguistic and social data presented in this dissertation supports an alternative view to Muysken’s relexification hypothesis, one that has the advantage of operating with well-precedented linguistic processes and which is actually observable in the present-day Salcedo area. The results from the study on lexical borrowing are significant because they demonstrate how a dynamic bilingual speech community has gradually diversified their Quichua lexicon under intense pressure to shift toward Spanish. They also show that Hispanicized Quichua (Quichua with heavy lexical borrowing) clearly arose from adlexification and prolonged lexical borrowing, and is one of at least six identifiable speech styles found in Salcedo. These results challenge particular interpretations of language contact outcomes, such as, ones that depict sources languages as discrete and ‘unmixed.’ The bilingual continuum presented in this thesis shows on the one hand, the range of speech styles that are accessible to different speakers, and on the other hand, the overlapping, syncretic features that are shared among the different registers and language varieties. It was observed that syncretic speech styles in Salcedo are employed by different consultants in varied interactional contexts, and in turn, produce different evaluations by other fellow community members. In the current dissertation, I challenge the claim that relexification and Media Lengua-type sentences develop in isolation and without the influence of other bilingual phenomena. Based on Muysken's Media Lengua example sentences and the speech styles from the Salcedo corpus, I argue that Media Lengua may have arisen as an institutionalized variant of the highly mixed "middle ground" within the range of the Salcedo bilingual continuum discussed above. Such syncretic forms of Spanish and Quichua strongly resemble Media Lengua sentences in Muysken’s research, and therefore demonstrate how its development could have occurred through several different language contact processes and not only through relexification.

Comparing fixed and flexible stocking as adaptations to inter-annual rainfall variability in the extensive beef industry of northern Australia

Many beef producers within the extensive cattle industry of northern Australia attempt to maintain a constant herd size from year-to-year (fixed stocking), whereas others adjust stock numbers to varying degrees annually in response to changes in forage supply. The effects of these strategies on pasture condition and cattle productivity cannot easily be assessed by grazing trials. Simulation studies, which include feedbacks of changes to pasture condition on cattle liveweight gain, can extend the results of grazing trials both spatially and temporally. They can compare a large number of strategies, over long periods of time, for a range of climate periods, at locations which differ markedly in climate. This simulation study compared the pasture condition and cattle productivity achieved by fixed stocking at the long-term carrying capacity with that of 55 flexible stocking strategies at 28 locations across Queensland and the Northern Territory. Flexible stocking strategies differed markedly in the degree they increased or decreased cattle stocking rates after good and poor pasture growing seasons, respectively. The 28 locations covered the full range in average annual rainfall and inter-annual rainfall variability experienced across northern Australia. Constrained flexibility, which limited increases in stocking rates after good growing seasons to 10% but decreased them by up to 20% after poor growing seasons, provides sustainable productivity gains for cattle producers in northern Australia. This strategy can improve pasture condition and increase cattle productivity relative to fixed stocking at the long-term carrying capacity, and its capacity to do this was greatest in the semiarid rangeland regions that contain the majority of beef cattle in northern Australia. More flexible stocking strategies, which also increased stocking rates after good growing seasons by only half as much as they decreased them after poor growing seasons, were equally sustainable and more productive than constrained flexibility, but are often impractical at property and industry scales. Strategies with the highest limits (e.g. 70%) for both annual increases and decreases in stocking rates could achieve higher cattle productivity, but this was at the expense of pasture condition and was not sustainable. Constrained flexible stocking, with a 10% limit for increases and a 20% limit for decreases in stocking rates annually, is a risk-averse adaptation to high and unpredictable rainfall variability for the extensive beef industry of northern Australia. © Australian Rangeland Society 2016.

Medical Device Development: the challenge for ergonomics

High quality, well designed medical devices are necessary to provide safe and effective clinical care for patients as well as to ensure the health and safety of professional and lay device users. Capturing the user requirements of users and incorporating these into design is an essential component of this. The field of ergonomics has an opportunity to assist, not only with this area, but also to encourage a more general consideration of the user during medical device development. A review of the literature on methods for assessing user requirements in engineering and ergonomics found that little published work exists on the ergonomics aspects of medical device development. In particular there is little advice available to developers on which issues to consider during design and development or recommendations for good practice in terms of the methods and approaches needed to capture the full range of user requirements. The Multidisciplinary Assessment of Technology Centre for Healthcare (MATCH) is a research collaboration that is working in conjunction with industrial collaborators to apply ergonomics methods to real case study projects with the ultimate aim of producing an industry-focused guide to applying ergonomics principles in medical device development.

Point of View: The importance of Leadership towards universal health coverage in Low Income Countries

Universal health coverage—defined as access to the full range of the most appropriate health care and technology for all people at the lowest possible price or with social health protection—was the goal of the 1978 Alma-Ata Conference on Primary Health Care in Kazakhstan. Many low-income (developing) countries are currently unable to reach this goal despite having articulated the same in their health-related documents. In this paper we argue that, over 30 years on, inadequate political and technical leadership has prevented the realization of universal health coverage in low-income countries.

The importance of Leadership towards universal health coverage in Low Income Countries

Universal health coverage—defined as access to the full range of the most appropriate health care and technology for all people at the lowest possible price or with social health protection—was the goal of the 1978 Alma-Ata Conference on Primary Health Care in Kazakhstan. Many low-income (developing) countries are currently unable to reach this goal despite having articulated the same in their health-related documents. In this paper we argue that, over 30 years on, inadequate political and technical leadership has prevented the realization of universal health coverage in low-income countries.

Habitat selection and phenotypic diversity in the anchovy of the Bay of Biscay

Diversity among individuals in a population is an important feature linking vital rates with behaviour and spatial occupation. We measured the growth increments in the otolith of individual fishes collected on the annual fisheries survey PELGAS from 2001 to 2015. Individuals who grew larger at juvenile stage occupied later in life more off-shore habitats. Further, we analysed the allozymes of 13 different loci from 2001 to 2006. Alleles of the enzyme IDH showed different frequencies in inshore and offshore habitats. The population spatially segregates along a coast to off-shore gradient with individuals showing different early growth and allele frequencies. Results show how individuals in a population segregate spatially in different habitats in relation with phenotypic diversity. This implies modelling the population with individual-based and physiological approaches to fully grasp its dynamics. It also implies developing management strategies to conserve infra-population diversity as a means to garantee the occupation of the full range of habitats.

A COMPARISON OF PIXEL-BASED VERSUS OBJECT ORIENTED ANALYSIS OF LANDSLIDES USING HISTORICAL REMOTE SENSING DATA

With recent advances in remote sensing processing technology, it has become more feasible to begin analysis of the enormous historic archive of remotely sensed data. This historical data provides valuable information on a wide variety of topics which can influence the lives of millions of people if processed correctly and in a timely manner. One such field of benefit is that of landslide mapping and inventory. This data provides a historical reference to those who live near high risk areas so future disasters may be avoided. In order to properly map landslides remotely, an optimum method must first be determined. Historically, mapping has been attempted using pixel based methods such as unsupervised and supervised classification. These methods are limited by their ability to only characterize an image spectrally based on single pixel values. This creates a result prone to false positives and often without meaningful objects created. Recently, several reliable methods of Object Oriented Analysis (OOA) have been developed which utilize a full range of spectral, spatial, textural, and contextual parameters to delineate regions of interest. A comparison of these two methods on a historical dataset of the landslide affected city of San Juan La Laguna, Guatemala has proven the benefits of OOA methods over those of unsupervised classification. Overall accuracies of 96.5% and 94.3% and F-score of 84.3% and 77.9% were achieved for OOA and unsupervised classification methods respectively. The greater difference in F-score is a result of the low precision values of unsupervised classification caused by poor false positive removal, the greatest shortcoming of this method.