Experience with the use of Acrobat in the CAJUN publishing project

Adobe's Acrobat software, released in June 1993, is based around a new Portable Document Format (PDF) which offers the possibility of being able to view and exchange electronic documents, independent of the originating software, across a wide variety of supported hardware platforms (PC, Macintosh, Sun UNIX etc.). The fact that Acrobat's imageable objects are rendered with full use of Level 2 PostScript means that the most demanding requirements can be met in terms of high-quality typography and device-independent colour. These qualities will be very desirable components in future multimedia and hypermedia systems. The current capabilities of Acrobat and PDF are described; in particular the presence of hypertext links, bookmarks, and yellow sticker annotations (in release 1.0) together with article threads and multi-media plugins in version 2.0, This article also describes the CAJUN project (CD-ROM Acrobat Journals Using Networks) which has been investigating the automated placement of PDF hypertextual features from various front-end text processing systems. CAJUN has also been experimenting with the dissemination of PDF over e-mail, via World Wide Web and on CDROM.

Online MBPeT dashboard : enabling performance testing as a service in the cloud

In this thesis, tool support is addressed for the combined disciplines of Model-based testing and performance testing. Model-based testing (MBT) utilizes abstract behavioral models to automate test generation, thus decreasing time and cost of test creation. MBT is a functional testing technique, thereby focusing on output, behavior, and functionality. Performance testing, however, is non-functional and is concerned with responsiveness and stability under various load conditions. MBPeT (Model-Based Performance evaluation Tool) is one such tool which utilizes probabilistic models, representing dynamic real-world user behavior patterns, to generate synthetic workload against a System Under Test and in turn carry out performance analysis based on key performance indicators (KPI). Developed at Åbo Akademi University, the MBPeT tool is currently comprised of a downloadable command-line based tool as well as a graphical user interface. The goal of this thesis project is two-fold: 1) to extend the existing MBPeT tool by deploying it as a web-based application, thereby removing the requirement of local installation, and 2) to design a user interface for this web application which will add new user interaction paradigms to the existing feature set of the tool. All phases of the MBPeT process will be realized via this single web deployment location including probabilistic model creation, test configurations, test session execution against a SUT with real-time monitoring of user configurable metric, and final test report generation and display. This web application (MBPeT Dashboard) is implemented with the Java programming language on top of the Vaadin framework for rich internet application development. The Vaadin framework handles the complicated web communications processes and front-end technologies, freeing developers to implement the business logic as well as the user interface in pure Java. A number of experiments are run in a case study environment to validate the functionality of the newly developed Dashboard application as well as the scalability of the solution implemented in handling multiple concurrent users. The results support a successful solution with regards to the functional and performance criteria defined, while improvements and optimizations are suggested to increase both of these factors.

Numerical encoding to tame SQL injection attacks.

Recent years have seen an astronomical rise in SQL Injection Attacks (SQLIAs) used to compromise the confidentiality, authentication and integrity of organisations’ databases. Intruders becoming smarter in obfuscating web requests to evade detection combined with increasing volumes of web traffic from the Internet of Things (IoT), cloud-hosted and on-premise business applications have made it evident that the existing approaches of mostly static signature lack the ability to cope with novel signatures. A SQLIA detection and prevention solution can be achieved through exploring an alternative bio-inspired supervised learning approach that uses input of labelled dataset of numerical attributes in classifying true positives and negatives. We present in this paper a Numerical Encoding to Tame SQLIA (NETSQLIA) that implements a proof of concept for scalable numerical encoding of features to a dataset attributes with labelled class obtained from deep web traffic analysis. In the numerical attributes encoding: the model leverages proxy in the interception and decryption of web traffic. The intercepted web requests are then assembled for front-end SQL parsing and pattern matching by applying traditional Non-Deterministic Finite Automaton (NFA). This paper is intended for a technique of numerical attributes extraction of any size primed as an input dataset to an Artificial Neural Network (ANN) and statistical Machine Learning (ML) algorithms implemented using Two-Class Averaged Perceptron (TCAP) and Two-Class Logistic Regression (TCLR) respectively. This methodology then forms the subject of the empirical evaluation of the suitability of this model in the accurate classification of both legitimate web requests and SQLIA payloads.

Portal de búsqueda de vulnerabiblidades web

El proyecto consiste en un portal de búsqueda de vulnerabilidades web, llamado Krashr, cuyo objetivo es el de buscar si una página web introducida por un usuario contiene algún tipo de vulnerabilidad explotable, además de tratar de ayudar a este usuario a arreglar las vulnerabilidades encontradas. Se cuenta con un back-end realizado en Python con una base de datos PostreSQL, un front-end web realizado en AngularJS y una API basada en Node.js y Express que comunica los dos frentes.

Diseño de cabezal de adquisición para biopotenciales

La monitorización del funcionamiento del corazón se realiza generalmente por medio del análisis de los potenciales de acción generados en las células responsables de la contracción y relajación de este órgano. El proceso de monitorización mencionado consta de diferentes partes. En primer lugar, se adquieren las señales asociadas a la actividad de las células cardíacas. La conexión entre el cuerpo humano y el sistema de acondicionamiento puede ser implementada mediante diferentes tipos de electrodos – de placa metálica, de succión, top-hat, entre otros. Antes de la adquisición la señal eléctrica recogida por los electrodos debe ser acondicionada de acuerdo a las especificaciones de la entrada de la tarjeta de adquisición de datos (DAQ o DAC). Básicamente, debe amplificar la señal de tal manera que se aproveche al máximo el rango dinámico del cuantificador. Las características de ruido del amplificador requerido deben ser diseñadas teniendo en cuenta que el ruido interno del amplificador no afecte a la interpretación del electrocardiograma original (ECG). Durante el diseño del amplificador se han tenido en cuenta varios requisitos. Deberá optimizarse ña relación señal a ruido (SNR) de la señal entre la señal del ECG y el ruido de cuantificación. Además, el nivel de la señal ECG a la entrada de la DAQ deberá alcanzar el máximo nivel del cuantificador. También, el ruido total a la entrada del cuantificador debe ser despreciable frente a la mínima señal discernible del ECG Con el objetivo de llevar a cabo un diseño electrónico con esas prestaciones de ruido, es necesario llevar a cabo un minucioso estudio de los fundamentos de caracterización de ruido. Se han abarcado temas como la teoría básica de señales aleatorias, análisis espectral y su aplicación a la caracterización en sistemas electrónicos. Finalmente, todos esos conceptos han sido aplicados a la caracterización de las diferentes fuentes de ruido en los circuitos con amplificadores operacionales. Muchos prototipos de amplificadores correspondientes a diferentes diseños han sido implementados en placas de circuito impreso (PCB – Printed Board Circuits). Aunque el ancho de banda del amplificador operacional es adecuado para su implementación en una ‘protoboard’, las especificaciones de ruido obligan al uso de PCB. De hecho, los circuitos implementados en PCB son menos sensibles al ruido e interferencias que las ‘protoboard’ dadas las características físicas de ambos tipos de prototipos.

Aplicación móvil para la gestión de los gastos en pisos compartidos

En esta memoria se describe el diseño y las pautas seguidas para la construcción de una aplicación móvil que permite la creación de grupos de personas para la gestión de los gastos, facturas y deudas comunitarias. Con un soporte Front-End en Android, un Back-End desarrollado en PHP y un almacenamiento de la información en una base de datos NoSQL, concretamente en MongoDB. El proyecto se ha realizado en grupo, separando los módulos Front-End y Back-End en dos proyectos distintos. En este proyecto desarrollamos el módulo Back-End. En él encontraremos el diseño para la construcción de la arquitectura REST y dar solución a la comunicación cliente y servidor de la aplicación. Además se ha añadido la componente PaaS (Platform as a Service) para acercar el desarrollo de este proyecto a un entorno de producción más real, afrontando así problemas reales. Al tratarse de un proyecto en equipo, el uso de metodologías ágiles cobra más importancia, por ello en este proyecto se ha hecho uso de la metodología Scrum.

Holistic Design In High-Speed Optical Interconnects

Integrated circuit scaling has enabled a huge growth in processing capability, which necessitates a corresponding increase in inter-chip communication bandwidth. As bandwidth requirements for chip-to-chip interconnection scale, deficiencies of electrical channels become more apparent. Optical links present a viable alternative due to their low frequency-dependent loss and higher bandwidth density in the form of wavelength division multiplexing. As integrated photonics and bonding technologies are maturing, commercialization of hybrid-integrated optical links are becoming a reality. Increasing silicon integration leads to better performance in optical links but necessitates a corresponding co-design strategy in both electronics and photonics. In this light, holistic design of high-speed optical links with an in-depth understanding of photonics and state-of-the-art electronics brings their performance to unprecedented levels. This thesis presents developments in high-speed optical links by co-designing and co-integrating the primary elements of an optical link: receiver, transmitter, and clocking.

In the first part of this thesis a 3D-integrated CMOS/Silicon-photonic receiver will be presented. The electronic chip features a novel design that employs a low-bandwidth TIA front-end, double-sampling and equalization through dynamic offset modulation. Measured results show -14.9dBm of sensitivity and energy efficiency of 170fJ/b at 25Gb/s. The same receiver front-end is also used to implement source-synchronous 4-channel WDM-based parallel optical receiver. Quadrature ILO-based clocking is employed for synchronization and a novel frequency-tracking method that exploits the dynamics of IL in a quadrature ring oscillator to increase the effective locking range. An adaptive body-biasing circuit is designed to maintain the per-bit-energy consumption constant across wide data-rates. The prototype measurements indicate a record-low power consumption of 153fJ/b at 32Gb/s. The receiver sensitivity is measured to be -8.8dBm at 32Gb/s.

Next, on the optical transmitter side, three new techniques will be presented. First one is a differential ring modulator that breaks the optical bandwidth/quality factor trade-off known to limit the speed of high-Q ring modulators. This structure maintains a constant energy in the ring to avoid pattern-dependent power droop. As a first proof of concept, a prototype has been fabricated and measured up to 10Gb/s. The second technique is thermal stabilization of micro-ring resonator modulators through direct measurement of temperature using a monolithic PTAT temperature sensor. The measured temperature is used in a feedback loop to adjust the thermal tuner of the ring. A prototype is fabricated and a closed-loop feedback system is demonstrated to operate at 20Gb/s in the presence of temperature fluctuations. The third technique is a switched-capacitor based pre-emphasis technique designed to extend the inherently low bandwidth of carrier injection micro-ring modulators. A measured prototype of the optical transmitter achieves energy efficiency of 342fJ/bit at 10Gb/s and the wavelength stabilization circuit based on the monolithic PTAT sensor consumes 0.29mW.

Lastly, a first-order frequency synthesizer that is suitable for high-speed on-chip clock generation will be discussed. The proposed design features an architecture combining an LC quadrature VCO, two sample-and-holds, a PI, digital coarse-tuning, and rotational frequency detection for fine-tuning. In addition to an electrical reference clock, as an extra feature, the prototype chip is capable of receiving a low jitter optical reference clock generated by a high-repetition-rate mode-locked laser. The output clock at 8GHz has an integrated RMS jitter of 490fs, peak-to-peak periodic jitter of 2.06ps, and total RMS jitter of 680fs. The reference spurs are measured to be –64.3dB below the carrier frequency. At 8GHz the system consumes 2.49mW from a 1V supply.

Interdisciplinarity and Design Conceptualisation: Contributions from a Small-Scale Design Experiment

Literature emphasises the sparse research focused in collaborative and open approaches in the design conceptualisation stage, also known as the Fuzzy Front-End (FFE). Presently, the most challenging discussion arising from this specific field of research lies in understanding on whether or not to structure the referred conceptual stage. Accordingly, the established hypothesis behind this study sustains that a structured approach in the FFE would benefit the interdisciplinary dialogue. Therefore, two objectives support this study: to understand the benefits of an interdisciplinary approach in the FFE, and to test one proposed model for this conceptual stage. By means of a small-scale design experiment, this paper pretends to give additional contributions to this area of research, in the context of new product development (NPD). The general research supporting this specific study aims to conceptualise in the area of newly and futuristic aircraft configurations. Hence, this same topic based the conceptualisation process in the conducted ideation sessions, which are conducted by five different teams of three elements each. The results of the different ideation sessions reinforce the contemporary paradigm of Open Innovation (OI), which is based in trust and communication to better collaborate. The postulated hypothesis for this study is partially validated as teams testing the proposed and structured model generally consider that its usage would benefit the integration of different disciplines. Besides, a general feeling that a structured approach integrates different perspectives and gives creativity a focus pervades. Nevertheless, the small-scale of the design experiment attributes some limitations to this study, despite giving new insights in how to better organise coming and more sustained studies. Interestingly, the importance of sketching as an interdisciplinary means of communication is underlined with the obtained results.

Recruitment and Retention in Front-line Services: The case of childcare

This article highlights how problems of recruitment and retention in front-line services create a particular challenge to traditional HRM models and solutions. Private day nurseries make an interesting example of the challenges facing managers in the service sector as the combination of a feminised workforce, a price-sensitive service, public-private competition and state regulation create particular difficulties. We report on a study of 33 day nurseries involving interviews with managers and employees over an eight-month period. Our findings show that childcare providers have to cope with recruitment and retention problems associated with high-end interactive service provision compounded by gender segregation and small business characteristics. Our analysis of employer and employee perspectives examines labour market issues affecting recruitment, and categorises the reasons for staff turnover into internal 'push' factors, external 'pull' factors, outside factors and functional turnover.

The hydrodynamics of small seabed mounted bottom hinged wave energy converters in shallow water:PhD thesis

This thesis investigates the hydrodynamics of a small, seabed mounted, bottom hinged, wave energy converter in shallow water. The Oscillating Wave Surge Converter is a pitching flap-type device which is located in 10-15m of water to take advantage of the amplification of horizontal water particle motion in shallow water. A conceptual model of the hydrodynamics of the device has been formulated and shows that, as the motion of the flap is highly constrained, the magnitude of the force applied to the flap by the wave is strongly linked to the power absorption.

An extensive set of experiments has been carried out in the wave tank at Queen’s University at both 40th and 20th scales. The experiments have included testing in realistic sea states to estimate device performance as well as fundamental tests using small amplitude monochromatic waves to determine the force applied to the flap by the waves. The results from the physical modelling programme have been used in conjunction with numerical data from WAMIT to validate the conceptual model.

The work finds that tuning the OWSC to the incident wave periods is problematic and only results in a marginal increase in power capture. It is also found that the addition of larger diameter rounds to the edges of the flap reduces viscous losses and has a greater effect on the performance of the device than tuning. As wave force is the primary driver of device performance it is shown that the flap should fill the water column and should pierce the water surface to reduce losses due to wave overtopping.

With the water depth fixed at approximately 10m it is shown that the width of the flap has the greatest impact on the magnitude of wave force, and thus device performance. An 18m wide flap is shown to have twice the absorption efficiency of a 6m wide flap and captures 6 times the power. However, the increase in power capture with device width is not limitless and a 24m wide flap is found to be affected by two-dimensional hydrodynamics which reduces its performance per unit width, especially in sea states with short periods. It is also shown that as the width increases the performance gains associated with the addition of the end effectors reduces. Furthermore, it is shown that as the flap width increases the natural pitching period of the flap increases, thus detuning the flap further from the wave periods of interest for wave energy conversion.

The effect of waves approaching the flap from an oblique angle is also investigated and the power capture is found to decrease with the cosine squared of the encounter angle. The characteristic of the damping applied by the power take off system is found to have a significant effect on the power capture of the device, with constant damping producing between 20% and 30% less power than quadratic damping. Furthermore, it is found that applying a higher level of damping, or a damping bias, to the flap as it pitches towards the beach increases the power capture by 10%.

A further set of experiments has been undertaken in a case study used to predict the power capture of a prototype of the OWSC concept. The device, called the Oyster Demonstrator, has been developed by Aquamarine Power Ltd. and is to be installed at the European Marine Energy Centre, Scotland, in 2009.

The work concludes that OWSC is a viable wave energy converter and absorption efficiencies of up 75% have been measured. It is found that to maximise power absorption the flap should be approximately 20m wide with large diameter rounded edges, having its pivot close to the seabed and its top edge piercing the water surface.

Software product line for power converters

Työn tilaajana toimi Visedo Oy. Työn tavoitteina oli tutkia Visedo Oy:n ohjelmistokehityksen nykytila, tunnistaa seuraavat parannuskohteet ja antaa ohjeita havaittujen parannuskohteiden korjaamiseksi. Visedo Oy:n tehonmuokkain ohjelmistokehityksen nykytilaa käsiteltiin neljän valitun osa-alueen näkökulmasta: ohjelmistoarkkitehtuurityyli, komponenttipohjainen ohjelmistokehitys, ohjelmistotuotelinjojen kehitysmenetelmät ja ohjelmistovariaatioiden hallinta. Valituilla osa-alueilla havaittujen parannuskohteiden perusteella annettiin korjausehdotuksia: ohjelmistoarkkitehtuurin rakenteeseen, komponenttien jakautumiselle, komponenttien koostamiselle ja komponenttien versioinnille. Lisäksi ehdotettiin uudenlaista ohjelmistotuotelinja rakennetta, joka yhdistää kerros- ja komponenttipohjaiset arkkitehtuurityylit mahdollistaen ominaisuuksiltaan eroavien tehonmuokkain ohjelmistojen hallinnan.

University of Southampton thesis front matter template for use with MS Word 2007/2010/2013/2016 for PC and 2008/2011/2016 for Apple

The University provides a template for the whole of a thesis but if you wish to construct a thesis by using separate files you can use this file for the introductory section. This file contains all of the sections required (Title Page, Abstract, Table of Contents etc). It also has mirror margins for double sided printing and has different odd and even page headers. Support materials for using the template are referenced near the start of the file. You will want to use this in conjunction with the Chapter http://www.edshare.soton.ac.uk/9403/ and End Matter templates http://www.edshare.soton.ac.uk/11998/

Outcomes in Advanced Head and Neck Cancer Treated with Up-front Neck Dissection prior to (Chemo)Radiotherapy.

OBJECTIVE Our aim was to compare outcomes with and without up-front neck dissection prior to (chemo)radiotherapy in head and neck squamous cell carcinoma. STUDY DESIGN Case series with chart review. SETTING Tertiary referral center. SUBJECTS AND METHODS Outcomes of oropharyngeal, laryngeal, and hypopharyngeal squamous cell carcinoma cases with neck lymph node metastases treated from January 2001 to March 2012 were analyzed. Due to imbalances in baseline characteristics between groups treated with (n = 129) and without (n = 95) up-front neck dissection, propensity score matching was performed. RESULTS Median follow-up was 48 months (range, 12-148). With up-front neck dissection, the hazard ratio for the primary end point, disease-free survival, was 0.63 (95% confidence interval: 0.37-1.06, P = .08). Up-front neck dissection reduced acute grade ≥3 toxicity significantly when xerostomia was excluded (odds ratio: 0.40, 95% confidence interval: 0.20-0.82, P = .012). CONCLUSION Our results indicate less acute treatment toxicity without any significant difference in terms of oncologic outcome with up-front neck dissection prior to (chemo)radiotherapy as compared with (chemo)radiotherapy alone. Well-designed randomized trials are required to verify this result and further investigate the impact of this strategy on late toxicity and oncologic outcome.