Factor analysis used to peak position optimization and spectral interference correction in inductively coupled plasma atomic emission spectrometry

Target transformation factor analysis was used to correct spectral interference in inductively coupled plasma atomic emission spectrometry (ICP-BES) for the determination of rare earth impurities in high purity thulium oxide. Data matrix was constructed with pure and mixture vectors and background vector. A method based on an error evaluation function was proposed to optimize the peak position, so the influence of the peak position shift in spectral scans on the determination was eliminated or reduced. Satisfactory results were obtained using factor analysis and the proposed peak position optimization method.

In-situ Fourier transform infrared spectroelectrochemistry as a probe of the glassy carbon electrode chemically modified by nickel (II)-cyanometallates

A new nickel (II)-cyanometallates modified on glassy carbon electrode was prepared by a new method and studied by cyclic voltammetry and in situ Fourier transform infrared (FTIR) spectroelectrochemistry. It was found that the NiHCF film existed in two forms: Ni2Fe(II)-(CN)(6) and M2NiFe(II)(CN)(6), Fe(CN)(3)(6-) codeposited in the NiHCF film existing in free cation or bridged-bond state depended on the property of the cations in electrolyte: in NaCl and LiCl solution, it is in bridges-bonded, but in HCl and KCl, it is free.

Mass spectral study of extractable La- and Lu-containing fullerenes

Mass spectra of LaxC2n (x = 1,2), well known endohedral metallofullerenes, and Lu2C2n (2n = 76-112), new members of extractable metallofullerenes, were studied. Positive-ion laser desorption/ionization (LDI) and electron impact (EI) mass spectra indicated that lutetium is a special lanthanide that prefers to form dilutetium fullerenes by the are-burning method. However, the signals for Lu2C2n become very weak in negative-ion LDI-MS, this is different from La-2@C-80, which has close relative abundances in positive- and negative-ion MS. The distinction between Lu2C2n and La-2@C-80 in the negative-ion LDI mass spectra may be due to the different structures of La- and Lu-containing fullerenes. (C) 1997 by John Wiley & Sons, Ltd.

The spectral properties of BaB8O13:Eu,Tb phosphors

The luminescence properties of BaB8O13:xEu,yTb phosphors which were synthesized in air atmosphere have been studied. The emissions of europium(III), terbium(III) and europium(II) have been observed in BaB8O13:xEu, yTb phosphors. Electron paramagnetic resonance (EPR) studies were carried out. The intensities of EPR peaks of europium(II) are increased if terbium(III) is increased in BaB8O13:Eu3+,yTb(3+) phosphors. So the valence state of europium is influenced by terbium(III). These phenomena can be explained by an electron transfer mechanism. We found a new kind of method to prepare trichromatic phosphor that two rare earth ions activated in a BaB8O13 matrix.

SYNTHESIS AND SPECTRAL CHARACTERISTICS OF DIVALENT SAMARIUM ACTIVATED BINARY FLUORIDES

A simple technique for preparation of powder binary fluorides activated with divalent samarium ions is described. The samarium impurity is introduced as samarium trifluoride SmF3 and hydrogen acts as the reducing agent to transform Sm3+ into Sm2+. Using this method, samarium has been stabilized in the divalent state in some fluorides: KMgF3, LiBaF3, BaBeF4, SrMgF4 and BaMgF4. Moreover, BaBeF4, SrMgF4 and BaMgF4 have never been activated with Sm2+ ions up to now. We also find that under the same synthetic conditions samarium can not be stabilized in the divalent state in some fluorides: KCaF3, CaBeF4 and CaMgF4, but the characteristic luminescence of trivalent samarium Sm3+ appears in these matrices. The emission and excitation spectra of samarium (Sm2+ and Sm3+) in these binary fluorides are presented and briefly discussed. The relationship between the oxidation state of samarium and the composition, the structure of matrices is also analyzed.

APPLICATION OF FACTOR-ANALYSIS TO CORRECTION OF SPECTRAL OVERLAP INTERFERENCE IN INDUCTIVELY COUPLED PLASMA ATOMIC EMISSION-SPECTROMETRY

Correction of spectral overlap interference in inductively coupled plasma atomic emission spectrometry by factor analysis is attempted. For the spectral overlap of two known lines, a data matrix can be composed from one or two pure spectra and a spectrum of the mixture. The data matrix is decomposed into a spectra matrix and a concentration matrix by target transformation factor analysis. The component concentration of interest in a binary mixture is obtained from the concentration matrix and interference from the other component is eliminated. This method is applied to correcting spectral interference of yttrium on the determination of copper and aluminium: satisfactory results are obtained. This method may also be applied to correcting spectral overlap interference for more than two lines. Like other methods of correcting spectral interferences, factor analysis can only be used for additive spectral overlap. Results obtained from measurements on copper/yttrium mixtures with different white noise added show that random errors in measurement data do not significantly affect the results of the correction method.

Fourier有限差分法深度偏移与正演模拟

With the development of seismic exploration, the target becomes more and more complex, which leads to a higher demand for the accuracy and efficiency in 3D exploration. Fourier finite-difference (FFD) method is one of the most valuable methods in complex structure exploration, which keeps the ability of finite-differenc method in dealing with laterally varing media and inherits the predominance of the phase-screen method in stablility and efficiency. In this thesis, the accuracy of the FFD operator is highly improved by using simulated annealing algorithm. This method takes the extrapolation step and band width into account, which is more suitable to various band width and discrete scale than the commonely-used optimized method based on velocity contrast alone. In this thesis, the FFD method is extended to viscoacoustic modeling. Based on one-way wave equation, the presented method is implemented in frequency domain; thus, it is more efficient than two-way methods, and is more convenient than time domain methods in handling attenuation and dispersion effects. The proposed method can handle large velocity contrast and has a high efficiency, which is helpful to further research on earth absorption and seismic resolution. Starting from the frequency dispersion of the acoustic VTI wave equation, this thesis extends the FFD migration method to the acoustic VTI media. Compared with the convetional FFD method, the presented method has a similar computational efficiency, and keeps the abilities of dealing with large velocity contrasts and steep dips. The numerical experiments based on the SEG salt model show that the presented method is a practical migration method for complex acoustical VTI media, because it can handle both large velocity contrasts and large anisotropy variations, and its accuracy is relatively high even in strong anisotropic media. In 3D case, the two-way splitting technique of FFD operator causes artificial azimuthal anisotropy. These artifacts become apparent with increasing dip angles and velocity contrasts, which prevent the application of the FFD method in 3D complex media. The current methods proposed to reduce the azimuthal anisotropy significantly increase the computational cost. In this thesis, the alternating-direction-implicit plus interpolation scheme is incorporated into the 3D FFD method to reduce the azimuthal anisotropy. By subtly utilizing the Fourier based scheme of the FFD method, the improved fast algorithm takes approximately no extra computation time. The resulting operator keeps both the accuracy and the efficiency of the FFD method, which is helpful to the inhancements of both the accuracy and the efficiency for prestack depth migration. The general comparison is presented between the FFD operator and the generalized-screen operator, which is valuable to choose the suitable method in practice. The percentage relative error curves and migration impulse responses show that the generalized-screen operator is much sensiutive to the velocity contrasts than the FFD operator. The FFD operator can handle various velocity contrasts, while the generalized-screen operator can only handle some range of the velocity contrasts. Both in large and weak velocity contrasts, the higher order term of the generalized-screen operator has little effect on improving accuracy. The FFD operator is more suitable to large velocity contrasts, while the generalized-screen operator is more suitable to middle velocity contrasts. Both the one-way implicit finite-difference migration and the two-way explicit finite-differenc modeling have been implemented, and then they are compared with the corresponding FFD methods respectively. This work gives a reference to the choosen of proper method. The FFD migration is illustrated to be more attractive in accuracy, efficiency and frequency dispertion than the widely-used implicit finite-difference migration. The FFD modeling can handle relatively coarse grids than the commonly-used explicit finite-differenc modeling, thus it is much faster in 3D modeling, especially for large-scale complex media.

全局优化的Fourier有限差分偏移方法研究

Seismic exploration is the main method of seeking oil and gas. With the development of seismic exploration, the target becomes more and more complex, which leads to a higher demand for the accuracy and efficiency in seismic exploration. Fourier finite-difference (FFD) method is one of the most valuable methods in complex structure exploration, which has obtained good effect. However, in complex media with wider angles, the effect of FFD method is not satisfactory. Based on the FFD operator, we extend the two coefficients to be optimized to four coefficients, then optimize them globally using simulated annealing algorithm. Our optimization method select the solution of one-way wave equation as the objective function. Except the velocity contrast, we consider the effects of both frequency and depth interval. The proposed method can improve the angle of FFD method without additional computation time, which can reach 75° in complex media with large lateral velocity contrasts and wider propagation angles. In this thesis, combinating the FFD method and alternative-direction-implicit plus interpolation(ADIPI） method, we obtain 3D FFD with higher accuracy. On the premise of keeping the efficiency of the FFD method, this method not only removes the azimuthal anisotropy but also optimizes the FFD mehod, which is helpful to 3D seismic exploration. We use the multi-parameter global optimization method to optimize the high order term of FFD method. Using lower-order equation to obtain the approximation effect of higher-order equation, not only decreases the computational cost result from higher-order term, but also obviously improves the accuracy of FFD method. We compare the FFD, SAFFD（multi-parameter simulated annealing globally optimized FFD）, PFFD, phase-shift method(PS）, globally optimized FFD （GOFFD）, and higher-order term optimized FFD method. The theoretical analyses and the impulse responses demonstrate that higher-order term optimized FFD method significantly extends the accurate propagation angle of the FFD method, which is useful to complex media with wider propagation angles.

Optical determination of fractal dimensions using Fourier transforms

R. Zwiggelaar and C.R. Bull, 'Optical determination of fractal dimensions using Fourier transforms', Optical Engineering 34 (5), 1325-1332 (1995)

Validation of a parabolic trough solar receiver model based on physical formulation of the absorber total emissivity from its spectral emissivity

Concentrating solar power is an important way of providing renewable energy. Model simulation approaches play a fundamental role in the development of this technology and, for this, an accurately validation of the models is crucial. This work presents the validation of the heat loss model of the absorber tube of a parabolic trough plant by comparing the model heat loss estimates with real measurements in a specialized testing laboratory. The study focuses on the implementation in the model of a physical-meaningful and widely valid formulation of the absorber total emissivity depending on the surface’s temperature. For this purpose, the spectral emissivity of several absorber’s samples are measured and, with these data, the absorber total emissivity curve is obtained according to Planck function. This physical-meaningful formulation is used as input parameter in the heat loss model and a successful validation of the model is performed. Since measuring the spectral emissivity of the absorber surface may be complex and it is sample-destructive, a new methodology for the absorber’s emissivity characterization is proposed. This methodology provides an estimation of the absorber total emissivity, retaining its physical meaning and widely valid formulation according to Planck function with no need for direct spectral measurements. This proposed method is also successfully validated and the results are shown in the present paper.

Identification of fluorescent beads using a coded aperture snapshot spectral imager.

We apply a coded aperture snapshot spectral imager (CASSI) to fluorescence microscopy. CASSI records a two-dimensional (2D) spectrally filtered projection of a three-dimensional (3D) spectral data cube. We minimize a convex quadratic function with total variation (TV) constraints for data cube estimation from the 2D snapshot. We adapt the TV minimization algorithm for direct fluorescent bead identification from CASSI measurements by combining a priori knowledge of the spectra associated with each bead type. Our proposed method creates a 2D bead identity image. Simulated fluorescence CASSI measurements are used to evaluate the behavior of the algorithm. We also record real CASSI measurements of a ten bead type fluorescence scene and create a 2D bead identity map. A baseline image from filtered-array imaging system verifies CASSI's 2D bead identity map.

Performance metrics of an optical spectral imaging system for intra-operative assessment of breast tumor margins.

As many as 20-70% of patients undergoing breast conserving surgery require repeat surgeries due to a close or positive surgical margin diagnosed post-operatively [1]. Currently there are no widely accepted tools for intra-operative margin assessment which is a significant unmet clinical need. Our group has developed a first-generation optical visible spectral imaging platform to image the molecular composition of breast tumor margins and has tested it clinically in 48 patients in a previously published study [2]. The goal of this paper is to report on the performance metrics of the system and compare it to clinical criteria for intra-operative tumor margin assessment. The system was found to have an average signal to noise ratio (SNR) >100 and <15% error in the extraction of optical properties indicating that there is sufficient SNR to leverage the differences in optical properties between negative and close/positive margins. The probe had a sensing depth of 0.5-2.2 mm over the wavelength range of 450-600 nm which is consistent with the pathologic criterion for clear margins of 0-2 mm. There was <1% cross-talk between adjacent channels of the multi-channel probe which shows that multiple sites can be measured simultaneously with negligible cross-talk between adjacent sites. Lastly, the system and measurement procedure were found to be reproducible when evaluated with repeated measures, with a low coefficient of variation (<0.11). The only aspect of the system not optimized for intra-operative use was the imaging time. The manuscript includes a discussion of how the speed of the system can be improved to work within the time constraints of an intra-operative setting.

Interactions spatiales et auto-organisation des végétations semi-arides

Les recherches récapitulées dans cette thèse de doctorat ont porté sur les causes de l’organisation spatiale des végétations périodiques. Ces structures paysagères aux motifs réguliers, tachetés, tigrés ou labyrinthiques, d’échelle décamétrique à hectométrique, couvrant des étendues considérables sur au moins trois continents, constituent un cas d’école dans l’étude des processus endogènes présidant à l’hétérogénéité du couvert végétal. Ces structures prennent place sur un substrat homogène, mis à part la rétroaction du couvert lui-même, et sont marquées par des écotones abrupts et la persistance d’une proportion considérable de sol nu. Plusieurs modèles ont mis en avant l’existence possible d’un phénomène d’auto-organisation du couvert, qui verrait une structure d’ensemble émerger des interactions locales entre individus. Ces modèles se basent sur le jeu simultané de la consommation de la ressource (compétition) et de l’amélioration de l’un ou l’autre des éléments du bilan de la même ressource par le couvert (facilitation). La condition à l’existence d’une structure d’ensemble spatialement périodique et stable réside dans une différence entre la portée de la compétition (plus grande) et celle de la facilitation. L’apparition de ces structures est modulée par le taux de croissance biologique, qui est le reflet des contraintes extérieures telles que l’aridité, le pâturage ou la coupe de bois. Le modus operandi des interactions spatiales supposées entre individus reste largement à préciser.

Nos recherches ont été menées au sud-ouest de la République du Niger, à l’intérieur et dans les environs du parc Régional du W. Trois axes ont été explorés :(i) Une étude de la dépendance spatiale entre la structure de la végétation (biovolumes cartographiés) et les paramètres du milieu abiotique (relief, sol), sur base d’analyses spectrales et cross-spectrales par transformée de Fourier (1D et 2D). (ii) Une étude diachronique (1956, 1975 et 1996) à large échelle (3000 km²) de l’influence de l’aridité et des pressions d’origine anthropique sur l’auto-organisation des végétations périodiques, basée sur la caractérisation de la structure spatiale des paysages sur photos aériennes via la transformée de Fourier en 2D. (iii) Trois études portant sur les interactions spatiales entre individus :En premier lieu, via l’excavation des systèmes racinaires (air pulsé) ;Ensuite, par un suivi spatio-temporel du bilan hydrique du sol (blocs de gypse) ;Enfin, via le marquage de la ressource par du deutérium.

Nous avons ainsi pu établir que les végétations périodiques constituent bien un mode d’auto-organisation pouvant survenir sur substrat homogène et modulé par les contraintes climatiques et anthropiques. Un ajustement rapide entre l’organisation des végétations périodiques et le climat a pu être montrée en zone protégée. La superficie et l’organisation des végétations périodiques y ont tour à tour progressé et régressé en fonction d’épisodes secs ou humides. Par contre, en dehors de l’aire protégée, la possibilité d’une restauration du couvert semble fortement liée au taux d’exploitation des ressources végétales. Ces résultats ont d’importantes implications quant à la compréhension des interactions entre climat et écosystèmes et à l’évaluation de leurs capacités de charge. La caractérisation de la structure spatiale des végétations arides, notamment par la transformée de Fourier d’images HR, devrait être généralisée comme outil de monitoring de l’état de ces écosystèmes. Nos études portant sur les modes d’interactions spatiales ont permis de confirmer l’existence d’une facilitation à courte portée du couvert végétal sur la ressource. Cependant, cette facilitation ne semble pas s’exercer sur le terme du bilan hydrique traditionnellement avancé, à savoir l’infiltration, mais plutôt sur le taux d’évaporation (deux fois moindre à l’ombre des canopées). Ce mécanisme exclut l’existence de transferts diffusifs souterrains entre sols nu et fourrés. Des transferts inverses semblent d’ailleurs montrés par le marquage isotopique. L’étude du bilan hydrique et la cartographie du micro-relief, ainsi que la profondeur fortement réduite de la zone d’exploitation racinaire, jettent de sérieux doutes quant au rôle communément admis des transferts d’eau par ruissellement/diffusion de surface en tant que processus clé dans la compétition à distance entre les plantes. L’alternative réside dans l’existence d’une compétition racinaire de portée supérieure aux canopées. Cette hypothèse trouve une confirmation tant par les rhizosphères excavées, superficielles et étendues, que dans le marquage isotopique, montrant des contaminations d’arbustes situés à plus de 15 m de la zone d’apport. De même, l’étude du bilan hydrique met en évidence les influences simultanées et contradictoires (facilitation/compétition) des ligneux sur l’évapotranspiration.

/

This PhD thesis gathers results of a research dealing with the causes of the spatial organisation of periodic vegetations. These landscape structures, featuring regular spotted, labyrinthine or banded patterns of decametric to hectometric scale, and extending over considerable areas on at least three continents, constitute a perfect study case to approach endogenous processes leading to vegetation heterogeneities. These patterns occur over homogeneous substratum, except for vegetation’s own feedbacks, and are marked by sharp ecotones and the persistence of a considerable amount of bare soil. A number of models suggested a possible case of self-organized patterning, in which the general structure would emerge from local interactions between individuals. Those models rest on the interplay of competitive and facilitative effects, relating to soil water consumption and to soil water budget enhancement by vegetation. A general necessary condition for pattern formation to occur is that negative interactions (competition) have a larger range than positive interactions (facilitation). Moreover, all models agree with the idea that patterning occurs when vegetation growth decreases, for instance as a result of reduced water availability, domestic grazing or wood cutting, therefore viewing patterns as a self-organised response to environmental constraints. However the modus operandi of the spatial interactions between individual plants remains largely to be specified.

We carried out a field research in South-West Niger, within and around the W Regional Park. Three research lines were explored: (i) The study of the spatial dependency between the vegetation pattern (mapped biovolumes) and the factors of the abiotic environment (soil, relief), on the basis of spectral and cross-spectral analyses with Fourier transform (1D and 2D). (ii) A broad scale diachronic study (1956, 1975, 1996) of the influence of aridity and human induced pressures on the vegetation self-patterning, based on the characterisation of patterns on high resolution remote sensing data via 2D Fourier transform. (iii) Three different approaches of the spatial interactions between individuals: via root systems excavation with pulsed air; via the monitoring in space and time of the soil water budget (gypsum blocks method); and via water resource labelling with deuterated water.

We could establish that periodic vegetations are indeed the result of a self-organisation process, occurring in homogeneous substratum conditions and modulated by climate and human constraints. A rapid adjustment between vegetation patterning and climate could be observed in protected zones. The area and patterning of the periodic vegetations successively progressed and regressed, following drier or wetter climate conditions. On the other hand, outside protected areas, the restoration ability of vegetation appeared to depend on the degree of vegetation resource exploitation. These results have important implications regarding the study of vegetation-climate interactions and the evaluation of ecosystems’ carrying capacities. Spatial pattern characterisation in arid vegetations using Fourier transform of HR remote sensing data should be generalised for the monitoring of those ecosystems. Our studies dealing with spatial interaction mechanisms confirmed the existence of a short range facilitation of the cover on water resource. However, this facilitation does not seem to act through the commonly accepted infiltration component, but rather on the evaporative rate (twice less within thickets). This mechanism excludes underground diffusive transfers between bare ground and vegetation. Inverse transfers were even shown by deuterium labelling. Water budget study and micro-elevation mapping, along with consistent soil shallowness, together cast serious doubts on the traditional mechanism of run-off/diffusion of surface water as a key process of the long range competition between plants. An alternative explanation lies in long range root competition. This hypothesis find support as well in the excavated root systems, shallow and wide, as in isotopic labelling, showing contaminations of shrubs located up to 15 m of the irrigated area. Water budget study also evidenced simultaneous contradictory effects (facilitation/competition) of shrubs on evapotranspiration.

Pseudo-spectral solutions for fluid flow and heat transfer in electro-metallurgical applications

The pseudo-spectral solution method offers a flexible and fast alternative to the more usual finite element/volume/difference methods, particularly when the long-time transient behaviour of a system is of interest. Since the exact solution is obtained at the grid collocation points superior accuracy can be achieved on modest grid resolution. Furthermore, the grid can be freely adapted with time and in space, to particular flow conditions or geometric variations. This is especially advantageous where strongly coupled, time-dependent, multi-physics solutions are investigated. Examples include metallurgical applications involving the interaction of electromagnetic fields and conducting liquids with a free sutface. The electromagnetic field then determines the instantaneous liquid volume shape and the liquid shape affects in turn the electromagnetic field. In AC applications a thin "skin effect" region results on the free surface that dominates grid requirements. Infinitesimally thin boundary cells can be introduced using Chebyshev polynomial expansions without detriment to the numerical accuracy. This paper presents a general methodology of the pseudo-spectral approach and outlines the solution procedures used. Several instructive example applications are given: the aluminium electrolysis MHD problem, induction melting and stirring and the dynamics of magnetically levitated droplets in AC and DC fields. Comparisons to available analytical solutions and to experimental measurements will be discussed.