Desenvolvimento de métodos de extração de resíduos de antimicrobianos e quantificação em amostras alimentares

O leite é um alimento complexo, pela sua composição rico em água, proteínas, lípidos, vitaminas e minerais. Devido ao seu alto valor nutricional é fundamental para a amamentação de crianças e animais em crescimento, pois fornece componentes fundamentais para o desenvolvimento e manutenção da saúde. Os antimicrobianos são amplamente utilizados como uma medida terapêutica no tratamento de infeções bacterianas, profilaxia e como promotores de crescimento (aditivos). A presença de resíduos de antimicrobianos no leite pode representar riscos para a saúde humana, como reações alérgicas em indivíduos hipersensíveis e resistências. Os objetivos deste estudo são o desenvolvimento de novos métodos de limpeza e de pré- concentração para amostras de leite, por meio de extração em fase sólida (SPE), com a finalidade de realizar uma melhor identificação e quantificação de antimicrobiana por Cromatografia Líquida de Alta Performance (HPLC). Todos os métodos desenvolvidos são de fácil execução, com taxas de recuperação dos agentes antimicrobianos viáveis, com uma percentagem de recuperação a partir de 85%. O método cromatográfico utilizado para a deteção e quantificação (HPLC-DAD) têm os limites de deteção (LD) entre 2.43ng / mL e 1.62ng / mL e os limites de quantificação (LQ) entre 7,36 ng / mL e 4.92 ng / mL, o que significa este método vai de encontro às diretrizes estipuladas pela União Europeia para os agentes antimicrobianos estudados. A combinação dos métodos propostos de limpeza e pré-concentração por SPE e multirresíduo por HPLC-DAD permite, por conseguinte, a deteção e quantificação de resíduos de antibióticos no leite, tornando esta uma alternativa importante e útil no processo de controlo de qualidade para a indústria de alimentos e outras área.

Spraying food sources with pyrethroid to control peridomestic triatomines

Introduction We attempted to supplement traditional insecticide spraying by treating peridomiciliar food sources with a powder formulation. Methods Two groups of houses were treated with deltamethrin suspension concentrate (SC), one of which had its primary peridomestic food sources treated with deltamethrin 2P. Results Triatoma brasiliensis was the most commonly captured triatomine. Birds, dogs and rodents were the major food sources identified by the precipitin reaction; 554 domestic animals received powder treatment. A sharp reduction in infestation rates was observed in the two groups up to 360 days after spraying. Conclusion The combination SC + 2P did not improve the control of triatomines.

Compaction quality control on site of earthworks - A comparative study

The capacity to use geologic materials (soil and rock) that are available in the surrounding environment is inherent to the human civilization and has contributed to the evolution of societies throughout the course of history. The use of these materials in the construction of structures such as houses, roads, railways or dams, stirred the improvement of socioeconomic and environmental conditions. Several reports of structural problems on embankments can be found throughout history. A considerable number of those registers can be linked to inadequate compaction, demonstrating the importance of guaranteeing a suitable quality of soil compaction. Various methodologies and specifications of compaction quality control on site of earthworks, based on the fill moisture content and dry unit weight, were developed during the 20th century. Two widely known methodologies are the conventional and nuclear techniques. The conventional methods are based on the use of the field sand cone test (or similar) and sampling of material for laboratory-based testing to evaluate the fill dry unit weight and water content. The nuclear techniques measure both parameters in the field using a nuclear density gauge. A topic under discussion in the geotechnical community, namely in Portugal, is the comparison between the accuracy of the nuclear gauge and sand cone test results for assessing the compaction and density ratio of earth fills, particularly for dams. The main purpose of this dissertation is to compare both of them. The data used were acquired during the compaction quality control operations at the Coutada/Tamujais dam trial embankment and core construction. This is a 25 m high earth dam located in Vila Velha de Rodão, Portugal. To analyse the spatial distribution of the compaction parameters (water content and compaction ratio), a 3D model was also developed. The main results achieved are discussed and finally some considerations are put forward on the suitability of both techniques to ensure fill compaction quality and on additional research to complement the conclusions obtained.

Food safety in wine: removal of ochratoxin A in contaminated white wine using commercial fining agents

The presence of mycotoxins in foodstuff is a matter of concern for food safety. Mycotoxins are toxic secondary metabolites produced by certain molds, being ochratoxin A (OTA) one of the most relevant. Wines can also be contaminated with these toxicants. Several authors have demonstrated the presence of mycotoxins in wine, especially ochratoxin A (OTA) [1]. Its chemical structure is a dihydro-isocoumarin connected at the 7-carboxy group to a molecule of L--phenylalanine via an amide bond. As these toxicants can never be completely removed from the food chain, many countries have defined levels in food in order to attend health concerns. OTA contamination of wines might be a risk to consumer health, thus requiring treatments to achieve acceptable standards for human consumption [2]. The maximum acceptable level of OTA in wines is 2.0 g/kg according to the Commission regulation No. 1881/2006 [3]. Therefore, the aim of this work was to reduce OTA to safer levels using different fining agents, as well as their impact on white wine physicochemical characteristics. To evaluate their efficiency, 11 commercial fining agents (mineral, synthetic, animal and vegetable proteins) were used to get new approaches on OTA removal from white wine. Trials (including a control without addition of a fining agent) were performed in white wine artificially supplemented with OTA (10 µg/L). OTA analysis were performed after wine fining. Wine was centrifuged at 4000 rpm for 10 min and 1 mL of the supernatant was collected and added of an equal volume of acetonitrile/methanol/acetic acid (78:20:2 v/v/v). Also, the solid fractions obtained after fining, were centrifuged (4000 rpm, 15 min), the resulting supernatant discarded, and the pellet extracted with 1 mL of the above solution and 1 mL of H2O. OTA analysis was performed by HPLC with fluorescence detection according to Abrunhosa and Venâncio [4]. The most effective fining agent in removing OTA (80%) from white wine was a commercial formulation that contains gelatine, bentonite and activated carbon. Removals between 10-30% were obtained with potassium caseinate, yeast cell walls and pea protein. With bentonites, carboxymethylcellulose, polyvinylpolypyrrolidone and chitosan no considerable OTA removal was verified. Following, the effectiveness of seven commercial activated carbons was also evaluated and compared with the commercial formulation that contains gelatine, bentonite and activated carbon. The different activated carbons were applied at the concentration recommended by the manufacturer in order to evaluate their efficiency in reducing OTA levels. Trial and OTA analysis were performed as explained previously. The results showed that in white wine all activated carbons except one reduced 100% of OTA. The commercial formulation that contains gelatine, bentonite and activated carbon (C8) reduced only 73% of OTA concentration. These results may provide useful information for winemakers, namely for the selection of the most appropriate oenological product for OTA removal, reducing wine toxicity and simultaneously enhancing food safety and wine quality.

Antibiofilm strategies in the food industry

Biofilms in food processing plants represent not only a problem to human health but also cause economic losses by technical failure in several systems. In fact, many foodborne outbreaks have been found to be associated with biofilms. Biofilms may be prevented by regular cleaning and disinfection, but this does not completely prevent biofilm formation. Besides, due to their diversity and to the development of specialized phenotypes, it is well known that biofilms are more resistant to cleaning and disinfection than planktonic microorganisms. In recent years, a considerable effort has been made in the prevention of microbial adhesion and biofilm formation on food processing surfaces and novel technologies have been introduced. In this context, this chapter discusses the main conventional and emergent strategies that have been employed to prevent bacterial adhesion to food processing surfaces and thus to efficiently maintain good hygiene throughout the food industries.

Green furniture: sustainable design guidelines for the Irish furniture and wood products industry.

This thesis presents the research and development of sustainable design guidelines for the furniture and wood products industry, suitable for sustainably enhancing design, manufacturing and associated activities. This sustainable guideline is based on secondary research conducted on subject areas such as ‘eco’ design, ‘green’ branding and ‘green’ consumerism, as well as an examination of existing certifications and sustainable tools techniques and methodologies, national and international drivers for sustainable development and an overview of sustainability in the Irish furniture manufacturing context. The guideline was further developed through primary research. This consisted of a focus group attended by leading Irish designers, manufacturers and academics in the area of furniture and wood products. This group explored the question of ‘green branding’ saturation in the market and the viability of investing in sustainability just yet. Participants stated that they felt the market for ‘green’ products is evolving very slowly and that there is no metric or legal framework present to audit whether or not companies are producing products that really embody sustainability. All the participants believed that developing and introducing a new certification process to incorporate a sustainable design process was a viable and necessary solution to protecting Irish furniture and wood manufacturers going forward. For the purposes of the case study, the author investigated a ‘sustainable’ design process for Team woodcraft, Ltd., through the design and development of a ‘sustainable’ children’s furniture range. The case study followed a typical design and development process; detailing customer design specifications, concept development and refinement and cumulating in final prototype, as well as associated engineering drawings. Based on this primary and secondary research, seven fundamental core principles for this sustainable guideline have been identified by the author. The author then used these core principles to expand into guidelines for the basis of proposed new Irish sustainable design guidelines for the furniture and wood products industry, the concept of which the author has named ‘Green Dot’. The author suggests that the ‘Green Dot’ brand or logo could be used to market an umbrella network of Irish furniture designers and manufactures who implement the recommended sustainable techniques.

Class-size Reduction Policies and the Quality of Entering Teachers

State-wide class-size reduction (CSR) policies have typically failed to produce large achievement gains. One explanation is that the introduction of such policies forces schools to hire relatively low-quality teachers. This paper uses data from an anonymous state to explore whether teacher quality suff ered from the introduction of CSR. We find that it did, but not nearly enough to explain the small achievement effects of CSR. The combined fall in achievement due to hiring lower quality teachers and more inexperienced teachers is small relative to the unrealized gains. Furthermore, between-school diff erences in the quality of incoming teachers cannot explain the poor estimated CSR performance from previous quasi-experimental treatment-control comparisons.

Effect of magnesium sulphate and L-tryptophan and genotype on the feed intake, behaviour and meat quality of pigs

Sixty-nine entire male pigs with different halothane genotype (homozygous halothane positive – nn –, n=36; and homozygous halothane negative – NN-, n=33) were fed with a supplementation of magnesium sulphate (Mg) and/or L-tryptophan (Trp) in the diet for 5 days before slaughter. Animals were housed individually and were submitted to stressful ante mortem conditions (mixed in the lorry according to treatments and transported 1 hour on rough roads). Individual feed intake was recorded during the 5-d treatment. At the abattoir, pig behaviour was assessed in the raceway to the stunning system and during the stunning period by exposure to CO2. Muscle pH, colour, water holding capacity, texture and cathepsin activities were determined to assess meat quality. The number of pigs with an individual feed intake lower than 2 kg/d was significantly different among diets (P&0.05; Control: 8.7 %; Mg&Trp: 43.5 %; Trp: 17.4 %) and they were considered to have inadequate supplement intake. During the ante mortem period, 15.2 % of pigs included in the experiment died, and this percentage decreased to 8.7 % in those pigs with a feed intake & 2kg/day, all of them from the stress-sensitive pigs (nn). In general, no differences were observed in the behaviour of pigs along the corridor leading to the stunning system and inside the CO2 stunning system. During the stunning procedure, Trp diet showed shorter periods of muscular excitation than control and Mg&Trp diets. The combination of a stressful ante mortem treatment and Mg&Trp supplementation led to carcasses with high incidence of severe skin lesions. Different meat quality results were found when considering all pigs or considering only those with adequate supplement intake. In this later case, Trp increased pH45 (6.15) vs Control diet (5.96) in the Longissimus thoracis (LT) muscle (P&0.05) and pH at 24h (Trp: 5.59 vs C: 5.47) led to a higher incidence of dark, firm and exudative (DFD) traits in SM muscle (P&0.05). Genotype affected negatively all the meat quality traits. Seventy-five percent of LT and 60.0 % of the SM muscles from nn pigs were classified as pale, soft and exudative (PSE), while none of the NN pigs showed these traits (P&0.0001). No significant differences were found between genotypes on the incidence of DFD meat. Due to the negative effects observed in the Mg&Trp group in feed intake and carcass quality, the utilization of a mixture of magnesium sulphate and tryptophan is not recommended.

Contrôle de la qualité des soins: aspects épidémiologiques. [Quality control of health care: epidemiological aspects].

Quality control in health care should be performed by health professionals. To do so they must define indicators, set up studies aimed at measuring and analyzing quality of care, and implement quality assurance programs in health care systems. The elements of a quality improvement program of this kind are described, with special emphasis on the contribution of epidemiology in this field.

Evaluation of subsidies programs to sell green cars: Impact on prices, quantities and efficiency

During the recent period of economic crisis, many countries have introduced scrappage schemes to boost the sale and production of vehicles, particularly of vehicles designed to pollute less. In this paper, we analyze the impact of a particular scheme in Spain (Plan2000E) on vehicle prices and sales figures as well as on the reduction of polluting emissions from vehicles on the road. We considered the introduction of this scheme an exogenous policy change and because we could distinguish a control group (non-subsidized vehicles) and a treatment group (subsidized vehicles), before and after the introduction of the Plan, we were able to carry out our analysis as a quasi-natural experiment. Our study reveals that manufacturers increased vehicle prices by the same amount they were granted through the Plan (1,000 €). In terms of sales, econometric estimations revealed an increase of almost 5% as a result of the implementation of the Plan. With regard to environmental efficiency, we compared the costs (inverted quantity of money) and the benefits of the program (reductions in polluting emissions and additional fiscal revenues) and found that the Plan would only be beneficial if it boosted demand by at least 30%.

The impact of agglomeration effects and accessibility on wages

This paper contributes to the empirical literature on the effects of agglomeration and road accessibility on productivity of firms by looking at the case of Spain. We approach productivity indirectly by using individual wages allocated at the NUTS III level. We use a repeated cross-section of individual micro-data for the years 1995, 2002 and 2006. The availability of interprovincial travel time data for each of the three years allows controlling for transport improvements over the period by using a market potential variable. Additionally, agglomeration is approached by employment density and we control for localization economies, human capital externalities and a large set of individual and workplace characteristics. Estimating by instrumental variables, our results show a positive and significant effect of market accessibility on wages and non linear effect for employment density.

The Innovation and Imitation Dichotomy in Spanish firms: do absorptive capacity and the technological frontier matter?

This paper analyses whether a firm’s absorptive capacity and its distance from the technological frontier affect the choice between innovation and imitation in innovative Spanish firms. From an extensive survey of 5,575 firms during the 2004-2009 period, we found two significant results. With regard to the role of absorptive capacity, the empirical evidence shows that when innovative firms have difficulties in accessing external information and hire skilled workers, their innovative capacity is reduced. Meanwhile, with regard to distance from the technological frontier, the firms that reduce this gap manage to increase their innovative capacity at the expense of imitation. To summarise, when we studied firms’ absorptive capacity and their relative position to the technological frontier in tandem, we found that the two factors directly affected firms' ability to innovate or imitate.

Hungry for Change: Social Exclusion, Food Poverty and Homelessness in Dublin

This study investigates the impact of poverty and social exclusion on the food, diet and nutrition of people out-of-home in Dublin. The research involved a food frequency survey carried out with 75 people out of home, qualitative interviews with 12 individuals as well as a self-completion questionnaire administered to 18 food service providers in Dublin city. One of the main findings from the study was that the extent and experience of food poverty among homeless people was not only conditioned by income inadequacy and other socio-economic and cultural determinants, but particularly, by access to accommodation, as well as the quality of that accommodation. The report makes a number of practice and policy recommendations to tackle food poverty and homelessness. The qualitative approaches to food poverty employed for use with this sample of people out-of-home aimed to deal in depth with issues around food consumption. Through drawing a sub-sample from those who participated in the survey research (a process of recapture), the authors sought to expand on the survey questionnaire information on food issues. The themes for the Focus Group Discussions (FGDs) emerged from the analysis of the survey questionnaires and 4 key thematic areas were selected. i) Access to cooking, preparation and storage facilities ii) Access, choice and constraints in food purchase and consumption iii) Access to information about healthy diet, food preparation and storage iv) Expectations, cultures, values and choice concerning eating The qualitative aspect of the research enquiry eventually generated one FGD and seven semi-structured interviews representing the views of a total of 12 persons all of whom had completed the initial survey questionnaire.This resource was contributed by The National Documentation Centre on Drug Use.

"The 3/3 strategy": a successful multifaceted hospital wide hand hygiene intervention based on WHO and continuous quality improvement methodology.

BACKGROUND Only multifaceted hospital wide interventions have been successful in achieving sustained improvements in hand hygiene (HH) compliance. METHODOLOGY/PRINCIPAL FINDINGS Pre-post intervention study of HH performance at baseline (October 2007-December 2009) and during intervention, which included two phases. Phase 1 (2010) included multimodal WHO approach. Phase 2 (2011) added Continuous Quality Improvement (CQI) tools and was based on: a) Increase of alcohol hand rub (AHR) solution placement (from 0.57 dispensers/bed to 1.56); b) Increase in frequency of audits (three days every three weeks: "3/3 strategy"); c) Implementation of a standardized register form of HH corrective actions; d) Statistical Process Control (SPC) as time series analysis methodology through appropriate control charts. During the intervention period we performed 819 scheduled direct observation audits which provided data from 11,714 HH opportunities. The most remarkable findings were: a) significant improvements in HH compliance with respect to baseline (25% mean increase); b) sustained high level (82%) of HH compliance during intervention; c) significant increase in AHRs consumption over time; c) significant decrease in the rate of healthcare-acquired MRSA; d) small but significant improvements in HH compliance when comparing phase 2 to phase 1 [79.5% (95% CI: 78.2-80.7) vs 84.6% (95% CI:83.8-85.4), p<0.05]; e) successful use of control charts to identify significant negative and positive deviations (special causes) related to the HH compliance process over time ("positive": 90.1% as highest HH compliance coinciding with the "World hygiene day"; and "negative":73.7% as lowest HH compliance coinciding with a statutory lay-off proceeding). CONCLUSIONS/SIGNIFICANCE CQI tools may be a key addition to WHO strategy to maintain a good HH performance over time. In addition, SPC has shown to be a powerful methodology to detect special causes in HH performance (positive and negative) and to help establishing adequate feedback to healthcare workers.

The effectiveness of market intervention policies to improve diet quality and to reduce the prevalence of obesity in Spain

Our project aims at analyzing the relevance of economic factors (mainly income and other socioeconomic characteristics of Spanish households and market prices) on the prevalence of obesity in Spain and to what extent market intervention prices are effective to reduce obesity and improve the quality of the diet, and under what circumstances. In relation to the existing literature worldwide, this project is the first attempt in Spain trying to get an overall picture on the effectiveness of public policies on both food consumption and the quality of diet, on one hand, and on the prevalence of obesity on the other. The project consists of four main parts. The first part represents a critical review of the literature on the economic approach of dealing with the obesity prevalence problems, diet quality and public intervention policies. Although another important body of obesity literature is dealing with physical exercise but in this paper we will limit our attention to those studies related to food consumption respecting the scope of our study and as there are many published literature review dealing with the literature related to the physical exercise and its effect on obesity prevalence. The second part consists of a Parametric and Non-Parametric Analysis of the Role of Economic Factors on Obesity Prevalence in Spain. The third part is trying to overcome the shortcomings of many diet quality indices that have been developed during last decades, such as the Healthy Eating Index, the Diet Quality Index, the Healthy Diet Indicator, and the Mediterranean Diet Score, through the development of a new obesity specific diet quality index. While the last part of our project concentrates on the assessment of the effectiveness of market intervention policies to improve the healthiness of the Spanish Diet Using the new Exact Affine Stone Index (EASI) Demand System.