Reciprocal changes in forebrain contents of glycogen and of glutamate/glutamine during early memory consolidation in the day-old chick

Passive avoidance learning is with advantage studied in day-old chicks trained to distinguish between beads of two different colors, of which one at training was associated with aversive taste. During the first 30-min post-training, two periods of glutamate release occur in the forebrain. One period is immediately after the aversive experience, when glutamate release is confined to the left hemisphere. A second release, 30 min later, may be bilateral, perhaps with preponderance of the right hemisphere. The present study showed increased pool sizes of glutamate and glutamine, specifically in the left hemisphere, at the time when the first glutamate release occurs, indicating de novo synthesis of glutamate/glutamine from glucose or glycogen, which are the only possible substrates. Behavioral evidence that memory is extinguished by intracranial administration at this time of iodoacetate, an inhibitor of glycolysis and glycogenolysis, and that the extinction of memory is counteracted by injection of glutamine, supports this concept. A decrease in forebrain glycogen of similar magnitude and coinciding with the increase in glutamate and glutamine suggests that glycogen rather than glucose is the main source of newly synthesized glutamate/glutamine. The second activation of glutamatergic activity 30 min after training, when memory is consolidated into stable, long-term memory, is associated with a bilateral increase in pool size of glutamate/glutamine. No glycogenolysis was observed at this time, but again there is a temporal correlation with sensitivity to inhibition by iodoacetate and rescue by glutamine, indicating the importance of de novo synthesis of glutamate/glutamine from glucose or glycogen. (C) 2003 Elsevier B.V All rights reserved.

The application of wave induced forces to a two-dimensional finite element long wave hydrodynamic model

This paper describes the modification of a two-dimensional finite element long wave hydrodynamic model in order to predict the net current and water levels attributable to the influences of waves. Tests examine the effects of the application of wave induced forces, including comparisons to a physical experiment. An example of a real river system is presented with comparisons to measured data, which demonstrate the importance of simulating the combined effects of tides and waves upon hydrodynamic behavior. (C) 2002 Elsevier Science Ltd. All rights reserved.

Multi-scale modeling of the mechanical behavior of polymer-based materials

Polymers have become the reference material for high reliability and performance applications. In this work, a multi-scale approach is proposed to investigate the mechanical properties of polymeric based material under strain. To achieve a better understanding of phenomena occurring at the smaller scales, a coupling of a Finite Element Method (FEM) and Molecular Dynamics (MD) modeling in an iterative procedure was employed, enabling the prediction of the macroscopic constitutive response. As the mechanical response can be related to the local microstructure, which in turn depends on the nano-scale structure, the previous described multi-scale method computes the stress-strain relationship at every analysis point of the macro-structure by detailed modeling of the underlying micro- and meso-scale deformation phenomena. The proposed multi-scale approach can enable prediction of properties at the macroscale while taking into consideration phenomena that occur at the mesoscale, thus offering an increased potential accuracy compared to traditional methods.

Estimating Local Part Thickness in Midplane Meshes for Finite Element Analysis

Within the development of motor vehicles, crash safety (e.g. occupant protection, pedestrian protection, low speed damageability), is one of the most important attributes. In order to be able to fulfill the increased requirements in the framework of shorter cycle times and rising pressure to reduce costs, car manufacturers keep intensifying the use of virtual development tools such as those in the domain of Computer Aided Engineering (CAE). For crash simulations, the explicit finite element method (FEM) is applied. The accuracy of the simulation process is highly dependent on the accuracy of the simulation model, including the midplane mesh. One of the roughest approximations typically made is the actual part thickness which, in reality, can vary locally. However, almost always a constant thickness value is defined throughout the entire part due to complexity reasons. On the other hand, for precise fracture analysis within FEM, the correct thickness consideration is one key enabler. Thus, availability of per element thickness information, which does not exist explicitly in the FEM model, can significantly contribute to an improved crash simulation quality, especially regarding fracture prediction. Even though the thickness is not explicitly available from the FEM model, it can be inferred from the original CAD geometric model through geometric calculations. This paper proposes and compares two thickness estimation algorithms based on ray tracing and nearest neighbour 3D range searches. A systematic quantitative analysis of the accuracy of both algorithms is presented, as well as a thorough identification of particular geometric arrangements under which their accuracy can be compared. These results enable the identification of each technique’s weaknesses and hint towards a new, integrated, approach to the problem that linearly combines the estimates produced by each algorithm.

Finite element analysis of pectus carinatum surgical correction via a minimally invasive approach

Pectus carinatum (PC) is a chest deformity caused by a disproportionate growth of the costal cartilages compared to the bony thoracic skeleton, pulling the sternum towards, which leads to its protrusion. There has been a growing interest on using the ‘reversed Nuss’ technique as minimally invasive procedure for PC surgical correction. A corrective bar is introduced between the skin and the thoracic cage and positioned on top of the sternum highest protrusion area for continuous pressure. Then, it is fixed to the ribs and kept implanted for about 2–3 years. The purpose of this work was to (a) assess the stresses distribution on the thoracic cage that arise from the procedure, and (b) investigate the impact of different positioning of the corrective bar along the sternum. The higher stresses were generated on the 4th, 5th and 6th ribs backend, supporting the hypothesis of pectus deformities correction-induced scoliosis. The different bar positioning originated different stresses on the ribs’ backend. The bar position that led to lower stresses generated on the ribs backend was the one that also led to the smallest sternum displacement. However, this may be preferred, as the risk of induced scoliosis is lowered.

The importance of quality in the consolidation of textile in Minho

The textile industry has a long tradition in Portugal and it is one of the most important sectors, despite the current economic crisis. It has always assumed a prominent role in terms of employment and a relevant position within the Portuguese economy. The lack of quality and the lower prices that other countries offer causes the loss of clients. Quality is a main tool to survive nowadays in the textile sector. To undertake our analysis, we made use of an existing database where 55 firms belonged to the textile industry, namely to the manufacturing sector. A new survey was created based on the original survey and was sent to 5 firms. Besides the survey, we also sent a few questions to the firms in order to retract more information about the actually situation in our country, concerning the textile industry. Several tables, graphs and pie charts were made to help shed light on our findings. This research was conducted in order to determine the importance of quality in the consolidation of textile firms in the north of Portugal. Most firms in our sample feel that quality improvement, business benefits, mobilizing employees’ knowledge and business image were important and that competition is very intense and is mainly by price and not by differentiation of product or service. The quality program has contributed to improve their competitive position and the improvement of their overall performance. The majority of the firms in our sample undertake TQM measures for quality purposes to meet customer expectations and prevent errors. Of all firms surveyed, the quality is certainly very important for its survival.

Studies in search of a suitable experimental insect model for xenodiagnosis of hosts with Chagas' disease: 3 - On the interaction of vector species and parasite strain in the reaction of bugs to infection by Trypanosoma cruzi

The reaction of nine vector species of Chagas' disease to infection by seven different Trypanosoma cruzi strains; Berenice, Y, FL, CL, S. Felipe, Colombiana and Gávea, are examined and compared. On the basis of the insects' ability to establish and maintain the infection, vector species could be divided into two distinct groups which differ in their reaction to an acute infection by T. cruzi. While the proportion of positive bugs was found to be low in Triatoma infestans and Triatoma dimidiata it was high, ranging from 96.9% to 100% in the group of wild (Rhodnius neglectus, Triatoma rubrovaria)and essentially sylvatic vectors in process of adaptation to human dwellings, maintained under control following successful insecticidal elimination of Triatoma infestans (Panstrongylus megistus, Triatoma sordida and Triatoma pseudomaculata). An intermediate position is held by Triatoma brasiliensis and Rhodnius prolixus. This latter has been found to interchange between domestic and sylvatic environments. The most important finding is the strikingly good reaction between each species of the sylvatic bugs and practically all T. cruzi strains herein studied, thus indicating that the factors responsible for the excellent reaction of P.megistus to infection by Y strain, as previously reported also come into operation in the reaction of the same vector species to acute infections by five of the remaining T.cruzi strains. Comparison or data reported by other investigators with those herein described form the basis of the discussion of Dipetalogaster maximus as regards its superiority as a xenodiagnostic agent.

Optimal design of piezolaminated structures using B-spline strip finite element models

A package of B-spline finite strip models is developed for the linear analysis of piezolaminated plates and shells. This package is associated to a global optimization technique in order to enhance the performance of these types of structures, subjected to various types of objective functions and/or constraints, with discrete and continuous design variables. The models considered are based on a higher-order displacement field and one can apply them to the static, free vibration and buckling analyses of laminated adaptive structures with arbitrary lay-ups, loading and boundary conditions. Genetic algorithms, with either binary or floating point encoding of design variables, were considered to find optimal locations of piezoelectric actuators as well as to determine the best voltages applied to them in order to obtain a desired structure shape. These models provide an overall economy of computing effort for static and vibration problems.

Infectivity of cysts of the ME-49 Toxoplasma gondii strain in bovine milk and homemade cheese

OBJECTIVE: Analyze the infectivity and storage resistance of cysts of the ME-49 strain of Toxoplasma gondii in artificially infected bovine milk and homemade fresh cheese. METHODS: Pasteurized bovine milk was infected with 10 cysts/ml of the ME-49 strain of T.gondii and inoculated in different groups of mice, immediately or after storage at 4ºC for 5, 10 and 20 days. Homemade fresh cheese was prepared with artificially infected milk, and also tested in groups of mice, using the same storage process. Infection was identified by the presence of cysts in the brain or serological testing in challenged mice after 5 weeks, confirmed by Western Blot and histology. RESULTS: The infectivity of cysts of the ME-49 strain of T.gondii was maintained in the milk even after storage for 20 days at refrigerator temperatures. Cysts were also able to survive the production process of homemade fresh cheese and storage for a period of 10 days in the same conditions. CONCLUSIONS: These data demonstrated that milk and dairy products could be an important source of T.gondii in human contamination, reinforcing the importance of milk pasteurization before any processing or ingestion.

Magnetized strangelets at finite temperature

The main properties of strangelets, namely their energy per baryon, radius and electric charge, are studied in the unpaired magnetized strange quark matter (MSQM) and paired magnetized colour flavour locked (MCFL) phases. Temperature effects are taken into account in order to study their stability compared to the Fe-56 isotope and nonmagnetized strangelets within the framework of the MIT bag model. We conclude that the presence of a magnetic field tends to stabilize the strangelets more, even when temperature is considered. It is also shown that MCFL strangelets are more stable than ordinary MSQM strangelets for typical gap values of the order of O(100) MeV. A distinctive feature in the detection of strangelets either in cosmic rays or in heavy-ion collider experiments could be their electric charge. We find that the electric charge is modified in the presence of the magnetic field, leading to higher (lower) charge values for MSQM (MCFL) strangelets, when compared to the nonmagnetized case.

Solubility of Ethene in Water and in a Medium for the Cultivation of a Bacterial Strain

The solubility of ethene in water and in the fermentation medium of Xanthobacter Py(2) was determined with a Ben-Naim-Baer type apparatus. The solubility measurements were carried out in the temperature range of (293.15 to 323.15) K and at atmospheric pressure with a precision of about +/- 0.3 %. The Ostwald coefficients, the mole fractions of the dissolved ethene, at the gas partial pressure of 101.325 kPa, and the Henry coefficients, at the water vapor pressure, were calculated using accurate thermodynamic relations. A comparison between the solubility of ethene in water and in the cultivation medium has shown that this gas is about 2.4 % more soluble in pure water. On the other hand, from the solubility temperature dependence, the Gibbs energy, enthalpy, and entropy changes for the process of transferring the solute from the gaseous phase to the liquid solutions were also determined. Moreover, the perturbed-chain statistical associating fluid theory equation of state (PC-SAFT EOS) model was used for the prediction of the solubility of ethene in water. New parameters, k(ij), are proposed for this system, and it was found that using a ky temperature-dependent PC-SAFT EOS describes more accurately the behavior solubilities of ethene in water at 101.325 kPa, improving the deviations to 1 %.

Deformação miocárdica analisada por 2D strain em indivíduos com lúpus eritematoso sistémico

Mestrado em Tecnologia de Diagnóstico e Intervenção Cardiovascular. Área de especialização: Ultrassonografia Cardiovascular.

Determination of stresses around a cylindrical single pile caused by horizontal movements of soils with the finitive element method

This study was carried out with the aim of modeling in 2D, in plain strain, the movement of a soft cohesive soil around a pile, in order to enable the determination of stresses resulting along the pile, per unit length. The problem in study fits into the large deformations problem and can be due to landslide, be close of depth excavations, to be near of zones where big loads are applied in the soil, etc. In this study is used an constitutive Elasto-Plastic model with the failure criterion of Mohr-Coulomb to model the soil behavior. The analysis is developed considering the soil in undrained conditions. To the modeling is used the finite element program PLAXIS, which use the Updated Lagrangian - Finite Element Method (UL-FEM). In this work, special attention is given to the soil-pile interaction, where is presented with some detail the formulation of the interface elements and some studies for a better understand of his behavior. It is developed a 2-D model that simulates the effect of depth allowing the study of his influence in the stress distribution around the pile. The results obtained give an important base about how behaves the movement of the soil around a pile, about how work the finite element program PLAXIS and how is the stress distribution around the pile. The analysis demonstrate that the soil-structure interaction modeled with the UL-FEM and interface elements is more appropriate to small deformations problems.

Avaliação ecocardiográfica da função sistólica ventricular direita em doentes com disfunção ventricular esquerda: parâmetros convencionais versus strain bidimensional

Mestrado em Tecnologia de Diagnóstico e Intervenção Cardiovascular.