Plasma confinement in tokamaks with robust torus

We present a non-linear symplectic map that describes the alterations of the magnetic field lines inside the tokamak plasma due to the presence of a robust torus (RT) at the plasma edge. This RT prevents the magnetic field lines from reaching the tokamak wall and reduces, in its vicinity, the islands and invariant curve destruction due to resonant perturbations. The map describes the equilibrium magnetic field lines perturbed by resonances created by ergodic magnetic limiters (EMLs). We present the results obtained for twist and non-twist mappings derived for monotonic and non-monotonic plasma current density radial profiles, respectively. Our results indicate that the RT implementation would decrease the field line transport at the tokamak plasma edge. © 2010 Elsevier B.V. All rights reserved.

Application of a bounded upwinding scheme to complex fluid dynamics problems

This paper is concerned with an overview of upwinding schemes, and further nonlinear applications of a recently introduced high resolution upwind differencing scheme, namely the ADBQUICKEST [V.G. Ferreira, F.A. Kurokawa, R.A.B. Queiroz, M.K. Kaibara, C.M. Oishi, J.A.Cuminato, A.F. Castelo, M.F. Tomé, S. McKee, assessment of a high-order finite difference upwind scheme for the simulation of convection-diffusion problems, International Journal for Numerical Methods in Fluids 60 (2009) 1-26]. The ADBQUICKEST scheme is a new TVD version of the QUICKEST [B.P. Leonard, A stable and accurate convective modeling procedure based on quadratic upstream interpolation, Computer Methods in Applied Mechanics and Engineering 19 (1979) 59-98] for solving nonlinear balance laws. The scheme is based on the concept of NV and TVD formalisms and satisfies a convective boundedness criterion. The accuracy of the scheme is compared with other popularly used convective upwinding schemes (see, for example, Roe (1985) [19], Van Leer (1974) [18] and Arora & Roe (1997) [17]) for solving nonlinear conservation laws (for example, Buckley-Leverett, shallow water and Euler equations). The ADBQUICKEST scheme is then used to solve six types of fluid flow problems of increasing complexity: namely, 2D aerosol filtration by fibrous filters; axisymmetric flow in a tubular membrane; 2D two-phase flow in a fluidized bed; 2D compressible Orszag-Tang MHD vortex; axisymmetric jet onto a flat surface at low Reynolds number and full 3D incompressible flows involving moving free surfaces. The numerical simulations indicate that this convective upwinding scheme is a good generic alternative for solving complex fluid dynamics problems. © 2012.

Caos e termalização na teoria de Yang-Mills com quebra espontânea de simetria

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Suspensões de Poisson, ergodicidade e o teorema central do limite

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Aspectos dinâmicos e ergódicos dos intercâmbios de intervalos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Bilhares planares

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Teorema ergódico multiplicativo de oseledets

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Sistemas dinâmicos e substituições

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Law of large numbers for certain cylinder flows

We construct new examples of cylinder flows, given by skew product extensions of irrational rotations on the circle, that are ergodic and rationally ergodic along a subsequence of iterates. In particular, they exhibit a law of large numbers. This is accomplished by explicitly calculating, for a subsequence of iterates, the number of visits to zero, and it is shown that such number has a Gaussian distribution.

Chaotic planar piecewise smooth vector fields with non-trivial minimal sets

In this paper some aspects on chaotic behavior and minimality in planar piecewise smooth vector fields theory are treated. The occurrence of non-deterministic chaos is observed and the concept of orientable minimality is introduced. Some relations between minimality and orientable minimality are also investigated and the existence of new kinds of non-trivial minimal sets in chaotic systems is observed. The approach is geometrical and involves the ordinary techniques of non-smooth systems.

Aplicação de melhorias na organização e nos processos de usinagem pesada

Currently productivity is a concern in large firms and in heavy machining industries could not be otherwise . The issue of time in the process becomes a relevant and worthy of analysis point , especially that the setup time becomes a critical issue to be addressed . Due to the size of the equipment studied ( heavy machining ) and especially with regard to the characteristics of the machine tool and the parts to be machined , generally robust and large parts , the preparation of such parts shall be made accurately to the machining has a good result as planned . With the setup acting as a limiter of productivity growth in this sector , actions constantly in search of reducing downtimes and optimization are taken . This study aimed to conduct a study that confirms increased productivity by reducing the machining time , especially setup time and also with the implementation of organizational tools. Actions taken in heavy machining industry Arm L- 580 Liebherr company in Brazil specifically in CNC Boring PAMA Speedram 3000 were analyzed . Through a qualitative study using the method of case study , it was examined before and after the sector and reducing setup times . Evidencing the shares through figures and collection times . The end result of this analysis was to verify that through simple actions productivity and organization in the area were directly affected in a positive way , and supporting organizational change throughout training were taught to be incorporated into the company culture

Circular, elliptic and oval billiards in a gravitational field

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Study of the feasibility of mix of species from sawmill waste and limiting for particleboard

This study aims to determine physical properties of particleboard made of sawmill waste, as a mix of several wood species, and two adhesives: urea-formaldehyde, usually employed in industry (even with drawbacks or formaldehyde emission during pressing) and FASTBOND®, water based resin, still poorly referenced in literature. Sixteen panels have been produced, in four experimental conditions, defined by using two adhesives and a 12 mm thick limiter (or not). Variance analysis was adopted to evaluate influence of experimental conditions on physical properties of produced panels, manufactured in nominal dimensions 350x350mm; 10% resin related to particles mass (at 5% moisture); 3.5 MPa compaction pressure, temperature 130°C, in a 10 min cycle. Tests to determine density, moisture content, swelling and water absorption were carried out based on normative parameters of ABNT NBR 14810:2006. Results have been satisfactory to panels produced with urea-formaldehyde but those manufactured with polychloroprene based resin (FASTBOND®) not meet regulatory requirements. Best results have been obtained without limiter.

O ato educativo numa perspectiva desconstrucionista: hospitalidade e experiência no espaço escolar

Pós-graduação em Educação Escolar - FCLAR

Divertor map with freedom of geometry and safety factor profile

An explicit, area-preserving and integrable magnetic field line map for a single-null divertor tokamak is obtained using a trajectory integration method to represent equilibrium magnetic surfaces. The magnetic surfaces obtained from the map are capable of fitting different geometries with freely specified position of the X-point, by varying free model parameters. The safety factor profile of the map is independent of the geometric parameters and can also be chosen arbitrarily. The divertor integrable map is composed of a nonintegrable map that simulates the effect of external symmetry-breaking resonances, so as to generate a chaotic region near the separatrix passing through the X-point. The composed field line map is used to analyze escape patterns (the connection length distribution and magnetic footprints on the divertor plate) for two equilibrium configurations with different magnetic shear profiles at the plasma edge.