Viabilidade técnica e econômica na utilização de um sistema fotovoltaico para alimentação de luminárias LED na Faculdade de Engenharia do Campus de Guaratinguetá SP

Solar energy can be considered the largest source of energy available on earth and has attracted in recent decades, attention and interest for its rational use. The use of energy sources in a sustainable way is essential to the survival of future generations, due to the scarcity of natural resources and their exploitation in a disorderly way. This academic work aims to bring a possible alternative to reduce the consumption of eletrical energy, at the University of Engineering – Campus of Guaratinguetá, through the use of a photovoltaic system interconnected to the LED bulbs. For this, the necessary data for the design of the photovoltaic system componentes and their acquisition costs were obtained and three differents configurations were developed to choose the one that bests fits the studied case, considering the return time of the initial investment (payback)

Analise dos trabalhos de conclusão do curso de engenharia de produção da UNESP de Guaratinguetá

This work is quantified according to the ABEPRO areas, the number of works the Course Conclusion (TCCs) and Hours (CH) Course of Production Engineering, UNESP Guaratinguetá. Based on this quantification were found to be significant discrepancies between the TCCs and CH. Quality and Logistics observed for the larger discrepancies, with 26% and 17% of the number of TCCs, respectively. Both areas have only 6% of the time. They are also used data from researchers at the National Council of Scientific and Technological Development (CNPq) in the areas of Production Engineering. In the area of Quality and Logistics, the researchers account for 8% and 5%, respectively, but are most prominent researchers in the field of Operations Research, with 37%. However, this view can help the department to organize the curriculum, with the development of teaching projects, methods and means of education, and visibility to help future hiring for the department

Softwares livres e prototipagem rápida aplicados na engenharia

In modern industry we see a growing need for answers cheaper, accurate and quick to deliver solutions and products to be able to remain competitive. In this way the inclusion of open source software and Rapid Prototyping tools have proven very important to obtain the expected results. This work, through information gathering, analysis software and their applicability, search tools commercially available rapid prototyping will demonstrate the importance of these tools and will also present possible configurations for a space for rapid prototyping within the university, as a proposal to implement a rapid prototyping laboratory at the Faculdade de Engenharia de Guaratinguetá

Resolução do problema de sequenciamento de múltiplas linhas de montagem de modelos mistos em ambiente de produção enxuta

This work deals with the sequencing of Multi-Mixed-Model Assembly Lines in a lean manufacturing environment, where an operational structure where several kanbans support several mixed-model assembly lines, so that all assembly lines can receive parts or sub-assemblies from all suppliers. To optimize this system, the sequencing seeks to minimize the distance between the real consumption and the constant ideal consumption of parts or subassemblies, thereby reducing the scaling of kanbans and intermediate stocks. To solve the sequencing problems, the method Clustering Search was applied along with the metaheuristics Variable Neighborhood Search, Simulation Annealing and Iterative Local Search. Instances from the literature and generated instances were tested, thus allowing comparing the methods to each other and with other methods presented in the literature. The performance of the Clustering Search with Iterated Local Search stands out by the quality and robustness of their solutions, and mainly for its efficiency, whereas it converges to better results at a lower computational cost

Pluralismo metodológico e aprendizagem dos alunos no ensino fundamental

Over the years is a significant number of researchers consider constructivism as a methodology above the rest and that can be applied to any educational context, and is therefore the ideal methodology in the present moment. However, as opposed to this idea, there is a growing body of research that consider the methodological pluralism how best to teach in class, precisely because it is not just one, but several methodological practices which vary according to the educational needs of students. This exhibit features four lessons presented to students of 6th and 8th grade of elementary school II, two lessons using experimental activities, a lesson using Demo activity and a lesson using texts textbooks. In all four lessons there was a collection of data on students' understanding about the physical concepts covered by each of the above four lessons either through questionnaires, video recording, and more. Based on Vygotsky's theory of social interaction and constructs Wertsch (1984), this article raises important discussions about the advantages and disadvantages of these three methodologies within the pluralistic proposal

Vivências acadêmicas: interferências na adaptação, permanência e desempenho de graduandos de cursos de engenharia de uma instituição pública federal

Pós-graduação em Educação - FFC

Nanotecnologia: ciência e engenharia

Pós-graduação em Física - FC

Avaliação histológica de estratégias de engenharia tecidual para a terapia endodôntica

Pós-graduação em Ciência Odontólogica - FOA

Acesso e permanência de alunos de engenharia da UTFPR - Câmpus Medianeira

Pós-graduação em Educação - FFC

Diretrizes básicas para projetos de vasos de pressão segundo a ASME Trabalho

In this work it was made analysis of a simple pressure vessel, using the analytical development studied in Mechanics of Materials disciplines, and then using the standard required by ASME. Following the simulation was realized using Autodesk Mechanical Simulation software to calculate the principal stresses in a pressure vessel. The simulation was done in a single vessel without nozzles, compared with the analytic calculation. After that, the simulation of another fictitious pressure vessel was done by adding three nozzles to verify the influence of the nozzles in the principal stresses and compared with the analytical results. After the simulation, it was found that the principal are bigger in the pressure vessel with nozzles, but they decrease at a small distance from the nozzle becoming equal to the stresses in the vessel without nozzles. The analytical results calculated according to the ASME agree with simulated results

Laboratório de inovação em cognição, informação, tecnologia e aprendizagem: engenharia no ensino médio

Este artigo descreve um conjunto de atividades educativas desenvolvidas no âmbito do projeto “Lab InCognITA – Laboratório de Inovação em Cognição, Informação, Tecnologia e Aprendizagem”, que objetiva promover o desenvolvimento de um conjunto de atividades e projetos com escolas públicas de nível médio, vinculadas à Diretoria de Ensino de Guaratinguetá, buscando despertar o interesse dos alunos para as áreas tecnológicas e engenharias. Destaca-se a importância dos recursos didáticos, em especial os baseados em experimentação, para promover uma melhoria no interesse dos estudantes pelas ciências exatas. A operacionalização do projeto é descrita por meio da apresentação das atividades previstas para o seu desenvolvimento, e de como estas são realizadas durante eventos denominados “Visita à UNESP”, em que alunos das escolas vêm até o Campus da UNESP – Guaratinguetá. Os resultados parciais obtidos sugerem que as atividades desenvolvidas durante as visitas têm contribuído para despertar o interesse dos estudantes para as áreas de Exatas e Engenharias.

Aplicação de engenharia tecidual na elevação de seio maxilar: uma revisão sistemática da literatura

The purpose of this literature review is to present the state-of-the-art on the application of tissue engineering techniques in sinus lifts procedures, reporting the influence of these techniques in increasing bone height and volume in the maxillary sinus, and the osseointegration of the implants installed in the grafted areas. PubMed and Scopus databases were searched using the keywords “scaffold” OR “engineered tissue” AND “sinus augmention” OR “sinus floor elevation”. In the initial search 463 articles were selected, of which 19 were selected abstracts reading, with nine papers selected by the end, for evaluation of the application of tissue engineering techniques in sinus lift procedures. Despite the positive results of tissue engineering procedures in sinus floor elevation reported in the selected articles, further studies are still needed, for a better standardization of experimental models and materials used, leading to definitive conclusions about the effects of the application of tissue engineering procedures on bone formation in maxillary sinus lifting procedures.

Análise de Tópicos Relevantes em Programação Linear e Aplicações no Ensino de Engenharia

Pós-graduação em Engenharia Elétrica - FEIS

Empacotamento de experimentos controlados em engenharia de software: uma abordagem baseada em ontologia

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Matrizes de quitosina-colágeno podem regular as atividades biológicas de células tronco mensenquimais adiposas para a engenharia de tecidos

Pós-graduação em Biofísica Molecular - IBILCE