Beta and gamma vibrational bands in deformed nuclei

Energies and relative intensities of gamma transitions in ¹⁵²Sm, ¹⁵²Gd, ¹⁵⁴Gd, ¹⁶⁶Er, and ²³²U following radioactive decay have been measured with a Ge(Li) spectrometer. A peak fitting program has been developed to determine gamma ray energies and relative intensities with precision sufficient to give a meaningful test of nuclear models. Several previously unobserved gamma rays were placed in the nuclear level schemes. Particular attention has been paid to transitions from the beta and gamma vibrational bands, since the gamma ray branching ratios are sensitive tests of configuration mixing in the nuclear levels. As the reduced branching ratios depend on the multipolarity of the gamma transitions, experiments were performed to measure multipole mixing ratios for transitions from the gamma vibrational band. In ¹⁵⁴Gd, angular correlation experiments showed that transitions from the gamma band to the ground state band were predominantly electric quadrupole, in agreement with the rotational model. In ²³²U, the internal conversion spectrum has been studied with a Si(Li) spectrometer constructed for electron spectroscopy. The strength of electric monopole transitions and the multipolarity of some gamma transitions have been determined from the measured relative electron intensities.

The results of the experiments have been compared with the rotational model and several microscopic models. Relative B(E2) strengths for transitions from the gamma band in ²³²U and ¹⁶⁶Er are in good agreement with a single parameter band mixing model, with values of z₂= 0.025(10) and 0.046(2), respectively. Neither the beta nor the gamma band transition strengths in ¹⁵²Sm and ¹⁵⁴Gd can be accounted for by a single parameter theory, nor can agreement be found by considering the large mixing found between the beta and gamma bands. The relative B(E2) strength for transitions from the gamma band to the beta band in ²³²U is found to be five times greater than the strength to the ground state band, indicating collective transitions with strength approximately 15 single particle units.

Electric field distribution in resonant reflection filters under normal incidence

Electric field distributions inside resonant reflection filters constructed using planar periodic waveguides are investigated in this paper. The electric fields may be intensified by resonance effects. Although the resonant reflection peaks can be quite narrow using weakly modulated planar periodic waveguides, the strong electric field enhancement limits their use in high-power laser systems. Strongly modulated waveguides may be used to reduce the electric field enhancement and a cover layer may be used to narrow the bandwidth at the same time. Desired results (i.e. almost no electric field enhancement together with narrow bandwidth) can be realized using this simple structure.

Letter and Recollections of Alexander Agassiz: The 1891 Albatross Expedition

Presented here is another in the list of historic accounts of iconic research cruises of the USFC Steamer Albatross, this a reminiscence of the renowned scientist Alexander Agassiz edited by his son G. R. Agassiz, a chapter from the volume “Letters and Recollections of Alexander Agassiz,” published in 1913. Agassiz made three major cruises in the Albatross in 1891, 1899–1900, and 1904–05, adding greatly to the world’s store of specimens and knowledge of thalasography, his favored term for oceangraphy, and specifically of the Pacific Ocean. Having made important cruises and studies with the Blake in the Caribbean, he sought to do comparable research in the Pacific. His opportunity came in 1890, and with the consent of President Benjamin Harrison, he took charge of this Albatross research cruise, paying much of the expense himself. In contrast with the other ships he had been on, he found the laboratories, equipment, and furnishings to be comparatively luxurious and extremely well appointed for his work. Further, the Albatross was then captained by Lieutenant Commander Zera Luther Tanner who seemed to take as much interest in the oceanographic research as did the scientists, and Agassiz appreciated working with him, too. Little of the original text has been altered, and readers are cautioned that some of the views expressed may reflect unfortunate prejudices of that era toward individuals, nationalities, etc.

Estudo sobre Produção mais Limpa (P+L) aplicado a um serviço de referência de uma Instituição de Ensino e Pesquisa - Rio de Janeiro (RJ).

O objetivo deste trabalho foi avaliar a potencialidade de implantação da Produção Mais Limpa (P+L), através do estudo de caso em Laboratório Biomédico de Referência em uma instituição pública de ensino e pesquisa localizada no Rio de Janeiro. Esta investigação é exploratória e analítica, utilizando-se como instrumentos a revisão bibliográfica e documental, a observação direta e a entrevista com aplicação de questionários voltados aos responsáveis pela área ambiental do laboratório pesquisado. A análise foi realizada confrontando-se os dados levantados com as recomendações da metodologia de P+L, identificando-se as lacunas e oportunidades para a melhoria dos serviços e processos de trabalho. O laboratório possui instalações modernas, organização, sistemas de avaliação da matéria-prima e insumos usados, além do gerenciamento dos resíduos. Contudo, nem todos os procedimentos são validados ou estão adequados às normas. Em geral, problemas em laboratórios dizem respeito ao uso excessivo de substâncias perigosas e ao manejo inadequado de resíduos, o qual pode ser contornado com a P+L, tendo como enfoque a prevenção da poluição e a minimização na fonte geradora. A redução do consumo de materiais e insumos, além da implantação de mudanças nos processos de trabalho, podem diminuir os custos financeiros e os impactos ambientais, como foi demonstrado no estudo. Para a melhoria da gestão dos laboratórios, recomenda-se a continuidade na aquisição, manutenção de equipamentos e infraestrutura. É importante a divulgação de informações ambientais e treinamento permanente para funcionários e alunos. A Sustentabilidade Ambiental só pode ser alcançada quando for bem entendida e absorvida por todos, sendo a alta administração das instituições a maior responsável para liderar esse processo. Para estudos futuros, propõe-se melhor definição e ampliação dos indicadores para o monitoramento e aprimoramento da gestão ambiental. Complementarmente, indicam-se estudos sobre a aquisição de conceitos pelos atores sobre a P+L e como eles podem contribuir com a Sustentabilidade Ambiental e a melhoria no ambiente de trabalho. Espera-se que esta pesquisa auxilie com o aperfeiçoamento da gestão no laboratório estudado e em instituições similares que a venham implantar a P+L.

A Single-armed Manta-board as a New Diver-controlled Planing Board and Its Use for Underwater Surveys

Due to inadequacies of previous underwater towing techniques and the special needs of a recent underwater survey, a modified mania-board technique was developed. With this new technique, the diver holds on to the manta-board with one arm; consequently, the board is referred to as a single-armed manta-board (sam-board). The sam-board proved inexpensive and highly maneuverable, allowing the divers to freely collect samples or record information. Through some experimenting with the board and changing some of the variables, such as rope lengths, towing speeds, etc., a highly efficient towing method can be achieved. Preplanning and strict diving safety procedures must, however, be implemented to assure efficiency. This paper presents the materials, guidelines for board construction, equipment, and preplanning and diving safety procedures necessary for the sam-board towing operation.

Preliminary results from the Caribbean Acoustic Tracking Network (CATn): a data sharing partnership for acoustic tracking and movement ecology of marine animals in the Caribbean Sea

We have recently exchanged and integrated into a single database tag detections for conch, teleost and elasmobranch fish from four separately maintained arrays in the U.S. Virgin Islands including the NMFS queen conch array (St. John nearshore), NOAA’s Biogeography Branch array (St. John nearshore & midshelf reef); UVI shelf edge arrays (Marine Conservation District, Grammanik & other shelf edge); NOAA NMFS Apex Predator array COASTSPAN (St. John nearshore). The integrated database has over 7.5 million hits. Data is shared only with consent of partners and full acknowledgements. Thus, the summary of integrated data here uses data from NOAA and UVI arrays under a cooperative agreement. The benefits of combining and sharing data have included increasing the total area of detection resulting in an understanding of broader scale connectivity than would have been possible with a single array. Partnering has also been cost-effectiveness through sharing of field work, staff time and equipment and exchanges of knowledge and experience across the network. Use of multiple arrays has also helped in optimizing the design of arrays when additional receivers are deployed. The combined arrays have made the USVI network one of the most extensive acoustic arrays in the world with a total of 150+ receivers available, although not necessarily all deployed at all times. Currently, two UVI graduate student projects are using acoustic array data.

In-vitro effect of fungicides on hyphal growth and sporogenesis of Lagenidium sp. isolated from Penaeus monodon larvae and Scylla serrata eggs

The sensitivity of Lagenidium, isolated from Penaeus monodon, Scylla serrata , to 34 antimycotics was determined. Effects on the development of vesicles, zoospores and mycelial growth were evaluated. Although mycoidal levels of the chemicals tested will be ideal for lethal treatment on control of the fungus, the high dose required may be lethal to the host, thus the use of mycostatic concentrations is more practical. Treatments of rearing water containing larvae, adult shrimps or crabs should be done only after preliminary tolerance experiments using at least the mycostatic dose prove to be safe for the hosts. Mycocidal doses can be used for determining disinfection doses of equipment and facilities used in rearing procedures as well as for destroying batches of infected larvae.

The socio-economic and cultural structures of the fisherfolk communities

Fishing communities that have exploited the resource for generations constitute the main stakeholder groups in the fisheries of Lake Victoria. Several studies have examined Uganda's Lake Victoria fishing communities and characterised key stakeholders at community level over the last decade (SEDAWOG 1999a and b; Geheb 1997; FeSEP 1997; Kitakule 1991). The communities are made up of scattered settlements at the shores and on islands. The categories of people living in these communities include fishers who consist primarily of large numbers of male youths who provide labour to boat and gear owners. There are resident and non-resident fish traders who after securing their supplies at the beaches, depart for their market destinations. In addition, there are fish processors, mostly operating traditional and improved smoking kilns. Many other people, dealing in provisions and supplies also stay at the beaches, their activities depending on the level of fish catch. The fishing communities of Lake Victoria, Uganda, include auxiliary livelihood activities such as boat building, net repairing and transportation; bait supply and beachside kiosks, video halls and retail shop business. Other economic activities are brick making, charcoal burning/wood trade, farming and livestock keeping.

Evaluating the impact of V2G services on the degradation of batteries in PHEV and EV

Many researchers and industry observers claim that electric vehicles (EV) and plug-in hybrid electric vehicles (PHEV) could provide vehicle-to-grid (V2G) bulk energy and ancillary services to an electricity network. This work quantified the impact on various battery characteristics whilst providing such services. The sensitivity of the impact of V2G services on battery degradation was assessed for EV and PHEV for different battery capacities, charging regimes, and battery depth of discharge. Battery degradation was found to be most dependent on energy throughput for both the EV and PHEV powertrains, but was most sensitive to charging regime (for EVs) and battery capacity (for PHEVs). When providing ancillary services, battery degradation in both powertrains was most sensitive to individual vehicle battery depth of discharge. Degradation arising from both bulk energy and ancillary services could be minimised by reducing the battery capacity of the vehicle, restricting the number of hours connected and reducing the depth of discharge of each vehicle for ancillary services. Regardless, best case minimum impacts of providing V2G services are severe such as to require multiple battery pack replacements over the vehicle lifetime. © 2013 Elsevier Ltd.

Hybrid-electric propulsion for aircraft

Against a background of increasing energy demand and rising fuel prices, hybrid-electric propulsion systems (HEPS) have the potential to significantly reduce fuel consumption in the aviation industry, particularly in the lighter sectors. By taking advantage of both Electric Motor (EM) and Internal Combustion Engine (ICE), HEPS provide not only a benefit in fuel saving but also a reduction in take-off noise and the emission levels. This research considers the design and sizing process of a hybrid-electric propulsion system for a single-seat demonstrator aircraft, the experimental derivation of the ICE map and the EM parameters. In addition to the experimental data, a novel modeling approach including several linked desktop PC software packages is presented to analyze and optimize hybrid-electric technology for aircraft. Further to the analysis of a parallel hybrid-electric, mid-scale aircraft, this paper also presents a scaling approach for a 20 kg UAV and a 50 tonne inter-city airliner. At the smaller scale, two different mission profiles are analyzed: an ISR mission profile, where the simulation routine optimizes the component size of the hybrid-electric propulsion system with respect to fuel saving, and a maximum duration profile; where the flight endurance is determined as a function of payload weight. At the larger scale, the performance of a 50 tonne inter-city airliner is modeled, based on a hybrid-electric gas-turbine, assuming a range of electric boost powers and battery masses.

Air quality and climate impacts of alternative bus technologies in Greater London.

The environmental impact of diesel-fueled buses can potentially be reduced by the adoption of alternative propulsion technologies such as lean-burn compressed natural gas (LB-CNG) or hybrid electric buses (HEB), and emissions control strategies such as a continuously regenerating trap (CRT), exhaust gas recirculation (EGR), or selective catalytic reduction with trap (SCRT). This study assessed the environmental costs and benefits of these bus technologies in Greater London relative to the existing fleet and characterized emissions changes due to alternative technologies. We found a >30% increase in CO2 equivalent (CO2e) emissions for CNG buses, a <5% change for exhaust treatment scenarios, and a 13% (90% confidence interval 3.8-20.9%) reduction for HEB relative to baseline CO2e emissions. A multiscale regional chemistry-transport model quantified the impact of alternative bus technologies on air quality, which was then related to premature mortality risk. We found the largest decrease in population exposure (about 83%) to particulate matter (PM2.5) occurred with LB-CNG buses. Monetized environmental and investment costs relative to the baseline gave estimated net present cost of LB-CNG or HEB conversion to be $187 million ($73 million to $301 million) or $36 million ($-25 million to $102 million), respectively, while EGR or SCRT estimated net present costs were $19 million ($7 million to $32 million) or $15 million ($8 million to $23 million), respectively.

Comparison of Q-factors between TE and TM modes in 3-D microsquares by FDTD simulation

Mode characteristics of three-dimensional (3-D) microsquare resonators are investigated by finite-difference time-domain (FDTD) simulation for the transverse electric (TE)-like and the transverse magnetic (TM)-like modes. For a pillar microsquare with a side length of 2 pin in air, we have Q-factors about 5 X. 103 for TM-like modes at the wavelength of 1550 run, which are one order larger than those of TE-like modes, as vertical refractive index distribution is 3.17/3.4/3.17 and the cororresponding center layer thickness is 0.2 mu m. The mode field patterns show that TM-like modes have much weaker vertical radiation coupling loss than TE-like modes. TM-like modes can have high Q-factors in a microsquare with weak vertical field confinement.

Electronic structure of coupled vertically stacked self-assembled InAs quantum disks in a vertical electric field

In the framework of the effective-mass and adiabatic approximations, by setting the effective-mass of electron in the quantum disks (QDs) different from that in the potential barrier material, we make some improvements in the calculation of the electronic energy levels of vertically stacked self-assembled InAs QD. Comparing with the results when an empirical value was adopted as the effective-mass of electron of the system, we can see that the higher levels become heightened. Furthermore, the Stark shifts of the system of different methods are compared. The Stark shifts of holes are also studied. The vertical electric field changes the splitting between the symmetric level and the antisymmetric one for the same angular momentum. (C) 2003 Elsevier Ltd. All rights reserved.

Franz-Keldysh effect and dynamical Franz-Keldysh effect of cylindrical quantum wires

We investigate the interband optical absorption spectra near the band edge of a cylindrical semiconductor quantum wire in the presence of a static electric field and a terahertz electric field polarized along the axis. Optical absorption spectra are nonperturbatively calculated by solving the low-density semiconductor Bloch equations in real space and real time. The influence of the Franz-Keldysh (FK) effect and dynamical FK effect on the absorption spectrum is investigated. To highlight the physics behind the FK effect and dynamical FK effect, the spatiotemporal dynamics of the polarization wave packet are also presented. Under a reasonable static electric field, substantial and tunable absorption oscillations appear above the band gap. A terahertz field, however, will cause the Autler-Townes splitting of the main exciton peak and the emergence of multiphoton replicas. The presented results suggest that semiconductor quantum wires have potential applications in electro-optical devices.

Quantifying robustness and dissipation cost of yeast cell cycle network: The funneled energy landscape perspectives

We study the origin of robustness of yeast cell cycle cellular network through uncovering its underlying energy landscape. This is realized from the information of the steady-state probabilities by solving a discrete set of kinetic master equations for the network. We discovered that the potential landscape of yeast cell cycle network is funneled toward the global minimum, G1 state. The ratio of the energy gap between G1 and average versus roughness of the landscape termed as robustness ratio ( RR) becomes a quantitative measure of the robustness and stability for the network. The funneled landscape is quite robust against random perturbations from the inherent wiring or connections of the network. There exists a global phase transition between the more sensitive response or less self-degradation phase leading to underlying funneled global landscape with large RR, and insensitive response or more self-degradation phase leading to shallower underlying landscape of the network with small RR. Furthermore, we show that the more robust landscape also leads to less dissipation cost of the network. Least dissipation and robust landscape might be a realization of Darwinian principle of natural selection at cellular network level. It may provide an optimal criterion for network wiring connections and design.