Controlador PID utilizando microcontrolador PIC

This monograph proposes the implementation of a low cost PID controller utilizing a PIC microcontroller, and its application in a positioning system previously controlled by a dedicated integrated circuit for a positioning system. Applying the closed-loop PID control, the system instability was reduced, and its response was smoother, eliminating vibrations and mechanical wear compared to its response with the dedicated integrated circuit, which has a very limited control action. The actuator of the system is a DC motor, whose speed is controlled by the Pulse Width Modulation (PWM) technique, using a Full-Bridge circuit, allowing the shift of direction of rotation. The utilized microcontroller was the PIC16F684, which has an enhanced PWM module, with its analog converters used as reference and position feedback. The positioning sensor is a multiturn potentiometer coupled to the motor axis by gears. The possibility of programming the PID coefficients in the microcontroller, as well as the adjustment of the sampling rate, allows the implemented system achieving high level of versatility

Sistema GPS: uma órbita em evolução - número de satélites e periodicidade

The objective of this project was to monitor the satellites of the Global Positioning System (GPS) from a fixed point on Earth and to verify the rate of recurrence respect to their rotation and displacement. A topographic GPS signal receiver connected to a personal computer was used to recorded, for five days, the displacement of the satellites. This work was based on the fact that many literature references state that satellites complete one orbit around the Earth every 12 hours, then, it is assumed that the satellite would be seen twice in a day from the same fixed point on Earth.Although, this does not occur, as thise time interval correspond to 12 hours sidereal time and not solar time. In addition, this study was carried out in order toconfirm and update the information related to the number of satellites in operation today, found to be 31. In that sense, some references concerning the space segment of this system were defined in details.

Distance exercised during submaximal training on race winnings for Thoroughbred racehorses

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A matemática dos sistemas de localização por satélites

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

A matemática e o GPS

Pós-graduação em Matemática - IBILCE

Assessment of modernized GPS L5 SNR for ground-based multipath reflectometry applications

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Planejamento Ambiental da Bacia Hidrográfica do Córrego Guaiçarinha, Município de Álvares Machado, São Paulo, Brasil

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Desenvolvimento e avaliação de desempenho de um sistema de posicionamento automático para painéis fotovoltaicos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Planejamento e zoneamento ambiental da bacia hidrográfica do manancial Balneário da Amizade nos municípios de Álvares Machado e Presidente Prudente - São Paulo/Brasil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Caracterização espacial da atividade apícola na microrregião de Campos do Jordão, São Paulo, Brasil

This study aimed to generate a database related to the spatial distribution of hives and productivity of regional producers, through the Geographic Information System (GIS) using the Global Positioning System. To build the database of geographical information (GIS) software for processing of geo-referenced information was used. The microregion (4 municipalities and 54 beekeepers) shows concentrations (pockets) of beekeepers and hives in certain locations. Further studies are needed on the characteristics of the local flora for bees to infer about possible saturation of floral resources, since no differences were observed between honey production in apiaries isolated or inserted into the pockets. The GIS proved to be an efficient tool for monitoring the location and origin of regional production, and for planning the distribution of hives and apiaries and so, contribute to a better use of flora and improvement of productivity of the apiaries.

Daily morphological changes determined by high-energy events on an embayed beach: a qualitative model

This paper examines the daily morphological responses of Sununga Beach, an embayed beach located on the south-eastern Brazilian coast, to storms in the South Atlantic Ocean. The main mechanisms and timing of beach erosion and accretion, the relationship between wave height and direction, and beach volume changes are considered, to establish a qualitative model for short-term embayed beach morphological changes. The methodology consisted of daily topographic surveys during the month of May in 2001, 2002, and 2003, using an RTK-GPS (real-time kinematics global positioning system). Weather and wave model results were used to correlate hydrodynamics and beach morphology. The results indicate that the morphodynamics of Sununga Beach are characterized by a process of beach rotation, which occurred more or less clearly during all three surveys. Unlike what has been commonly described in the literature for longer time intervals and alternations of fair and stormy weather, the beach rotation processes on Sununga Beach occurred under conditions of moderate-to-high wave energy change (wave heights greater than 2 m). An integrated evaluation of the behaviour of the meteorological aspects, together with beach morphology, enabled us to recognize that extra-tropical cyclones were the most important agent in remobilizing the beach planform, whether in beach rotation or in cross-shore erosion. Copyright (C) 2010 John Wiley & Sons, Ltd.

Indagine delle proprietà statistiche di serie temporali di posizione applicata al caso della stazione permanente GPS della base Mario Zucchelli in Terra Vittoria (Antartide)

Da ormai sette anni la stazione permanente GPS di Baia Terranova acquisisce dati giornalieri che opportunamente elaborati consentono di contribuire alla comprensione della dinamica antartica e a verificare se modelli globali di natura geofisica siano aderenti all’area di interesse della stazione GPS permanente. Da ricerche bibliografiche condotte si è dedotto che una serie GPS presenta molteplici possibili perturbazioni principalmente dovute a errori nella modellizzazione di alcuni dati ancillari necessari al processamento. Non solo, da alcune analisi svolte, è emerso come tali serie temporali ricavate da rilievi geodetici, siano afflitte da differenti tipologie di rumore che possono alterare, se non opportunamente considerate, i parametri di interesse per le interpretazioni geofisiche del dato. Il lavoro di tesi consiste nel comprendere in che misura tali errori, possano incidere sui parametri dinamici che caratterizzano il moto della stazione permanente, facendo particolare riferimento alla velocità del punto sul quale la stazione è installata e sugli eventuali segnali periodici che possono essere individuati.

Metodi numerici per lo studio di centri di lavoro ad alta velocità

A Machining Centre is nowadays a complex mechanical, electronic, electrical system that needs integrated design capabilities which very often require a high time-consuming effort. Numerical techniques for designing and dimensioning the machine structure and components usually requires different knowledge according to the system that have to be designed. This Ph. D Thesis is related about the efforts of the Authors to develop a system that allows to perform the complete project of a new machine optimized in its dynamic behaviour. An integration of the different systems developed, each of which respond to specific necessities of designer, is here presented. In particular a dynamic analysis system, based on a lumped mass approach, that rapidly allows to setup the drives of the machine and an Integrated Dynamic Simulation System, based on a FEM approach, that permit a dynamic optimization, are shown. A multilevel Data Base, and an operator interface module provide to complete the designing platform. The proposed approach represents a significant step toward the virtual machining for the prediction of the quality of the worked surface.

Sea level measurement using single GNSS antenna SNR signals

This thesis presents a possible method to calculate sea level variation using geodetic-quality Global Navigate Satellite System (GNSS) receivers. Three antennas are used: two small antennas and a choke ring one, analyzing only Global Positioning System signals. The main goal of the thesis is to test a modified configuration for antenna set up. In particular, measurements obtained tilting one antenna to face the horizon are compared to measurements obtained from antennas looking upward. The location of the experiment is a coastal environment nearby the Onsala Space Observatory in Sweden. Sea level variations are obtained using periodogram analysis of the SNR signal and compared to synthetic gauge generated from two independent tide gauges. The choke ring antenna provides poor result, with an RMS around 6 cm and a correlation coefficients of 0.89. The smaller antennas provide correlation coefficients around 0.93. The antenna pointing upward present an RMS of 4.3 cm and the one pointing the horizon an RMS of 6.7 cm. Notable variation in the statistical parameters is found when modifying the length of the interval analyzed. In particular, doubts are risen on the reliability of certain scattered data. No relation is found between the accuracy of the method and weather conditions. Possible methods to enhance the available data are investigated, and correlation coefficient above 0.97 can be obtained with small antennas when sacrificing data points. Hence, the results provide evidence of the suitability of SNR signal analysis for sea level variation in coastal environment even in the case of adverse weather conditions. In particular, tilted configurations provides comparable result with upward looking geodetic antennas. A SNR signal simulator is also tested to investigate its performance and usability. Various configuration are analyzed in combination with the periodogram procedure used to calculate the height of reflectors. Consistency between the data calculated and those received is found, and the overall accuracy of the height calculation program is found to be around 5 mm for input height below 5 m. The procedure is thus found to be suitable to analyze the data provided by the GNSS antennas at Onsala.

Confronto tra stime GPS e SAR di deformazioni del suolo e di ritardi troposferici

Il Global Positioning System (GPS) e l’Interferometric Synthetic Aperture Radar (InSAR) sono due tecniche osservative di grande importanza che utilizzano segnali nel campo delle microonde. Questa tesi intende contribuire a sviluppare una base di confronto tra i risultati derivati da queste due tecniche osservative. Una parte del lavoro riguarda uno studio delle deformazioni del suolo, in particolare, la stima dei movimenti verticali e di quelli che riguardano la componente Est della posizione delle stazioni. Un secondo ambito di ricerca è invece focalizzato alla determinazione del ritardo introdotto, nella propagazione dei segnali GPS e SAR, dal loro passaggio in atmosfera. In particolare, si è studiato l’effetto della componente umida della troposfera.