Development and characterization of orally-disintegrating films for propolis delivery

This study aimed at evaluating the effect of different concentrations of hydrolyzed collagen (HC) on the properties of an orally disintegrating film containing propolis ethanol extract (PEE) as an active component. The films were evaluated in terms of total phenols, mechanical properties, solubility, contact angle, disintegration time, and microstructure. The films were prepared by casting with 2 g of protein mass (gelatin and HC), 30 g of sorbitol/100 g of protein mass, and 100 g of PEE/100 g of protein mass. HC was incorporated at concentrations of 0, 10, 20, and 30 g/100 g of protein mass. It was found that increased concentrations of HC reduced tensile strength and increased elongation; however, all films showed plastic behavior. An increase in solubility at 25 ºC, a reduction in the contact angle, and disintegration time were also observed. Thus, higher concentrations of collagen led to more hydrophilic and more soluble polymeric matrices that showed shorter dissolution time, favoring the use of these materials as carriers for active compounds to be delivered in the oral cavity.

Breastfeeding preterm infant from the delivery ward via nicu to home

The aim of this study was to examine how to support breastfeeding of preterm infants immediately after birth in the delivery ward, during their hospital stay in a neonatal intensive care unit (NICU), and at home after hospital discharge. Specifically, the role of early physical contact, maternal breastfeeding attitude, and an internet-based peer support group were investigated. The delivery ward practices concerning the implementation of early physical contact between a mother and her infant admitted to a NICU were examined by a structured survey in two hospitals. An Internet-based, breastfeeding peer-support intervention for the mothers of preterm infants was developed and tested in a randomized controlled design with one year follow-up. The main outcomes were the duration of exclusive and overall breastfeeding, expressing milk, and maternal attitude. In addition, the perceptions of mothers of preterm infants were investigated by analyzing the peer-support group discussions with a qualitative approach. The implementation of early physical contact was different between the two hospitals studied and was based more on hospital routines than the physiological condition of the infant. Preterm infants, who were born before a gestational age (GA) of 32 weeks, were hardly ever allowed to have early contact with their mothers. Both, a higher GA and early physical contact predicted earlier initiation and increased frequency of breastfeeding in the NICU. A maternal breastfeeding-favorable attitude predicted increased frequency of breastfeeding in the NICU and also a longer duration of overall breastfeeding. The actual duration of breastfeeding was, however, shorter than the mothers intended in advance. The internet-based, peer-support intervention had no effect on the duration of breastfeeding, expressing milk, or maternal attitude. The participating mothers enjoyed the possibility of sharing their experiences of preterm infants with other mothers in similar situations. Some of the mothers also experienced being given useful advice for breastfeeding. Based on the mothers’ discussions, a process of breastfeeding preterm infants was created. This included some paradoxical elements in the NICU where, for example, breast milk was emphasized over breastfeeding and support in the hospital varied. Hospital discharge was a critical point, when the mothers faced breastfeeding in reality. Over time, the mothers assimilated their breastfeeding experience into part of being a mother. The care practices related to early physical contact in delivery wards need to be re-evaluated to allow more infants to have a moment with the mother. Maternal attitude could be screened prenatally and attitude-focused interventions developed. Breastfeeding support in the NICU should be standardized. Internet-based breastfeeding peer-support intervention was feasible but additional research is needed.

Development of a bovine adenovirus type 2-based gene delivery vector /

ABSTRACT Recombinant adenoviruses are currently under intense investigation as potential gene delivery and gene expression vectors with applications in human and veterinary medicine. As part of our efforts to develop a bovine adenovirus type 2 (BAV2) based vector system, the nucleotide sequence of BAV2 was determined. Sixty-six open reading frames (ORFs) were found with the potential to encode polypeptides that were at least 50 amino acid (aa) residue long. Thirty-one of the BAV2 polypeptide sequences were found to share homology to already identified adenovirus proteins. The arrangement of the genes revealed that the BAV2 genomic organization closely resembles that of well-characterized human adenoviruses. In the course of this study, continuous propagation of BAV2 over many generations in cell culture resulted in the isolation of a BAV2 spontaneous mutant in which the E3 region was deleted. Restriction enzyme, sequencing and PCR analyses produced concordant results that precisely located the deletion and revealed that its size was exactly 1299 bp. The E3-deleted virus was plaque-purified and further propagated in cell culture. It appeared that the replication of such a virus lacking a portion of the E3 region was not affected, at least in cell culture. Attempts to rescue a recombinant BAV2 virus with the bacterial kanamycin resistance gene in the E3 region yielded a candidate as verified with extensive Southern blotting and PCR analyses. Attempts to purify the recombinant virus were not successful, suggesting that such recombinant BAV2 was helper-dependent. Ten clones containing full-length BAV2 genomes in a pWE15 cosmid vector were constructed. The infectivity of these constructs was tested by using different transfection methods. The BAV2 genomic clones did appear to be infectious only after extended incubation period. This may be due to limitations of various transfection methods tested, or biological differences between virus- and E. co//-derived BAV2 DNA.

The role of intrapartum intravenous therapy and method of delivery on newborn weight loss : challenging the 7% rule

It is common practice to initiate supplemental feeding in newborns if body weight decreases by 7-10% in the first few days after birth (7-10% rule). Standard hospital procedure is to initiate intravenous therapy once a woman is admitted to give birth. However, little is known about the relationship between intrapartum intravenous therapy and the amount of weight loss in the newborn. The present research was undertaken in order to determine what factors contribute to weight loss in a newborn, and to examine the relationship between the practice of intravenous intrapartum therapy and the extent of weight loss post-birth. Using a cross-sectional design with a systematic random sample of 100 mother-baby dyads, we examined properties of delivery that have the potential to impact weight loss in the newborn, including method of delivery, parity, duration of labour, volume of intravenous therapy, feeding method, and birth attendant. This study indicated that the volume of intravenous therapy and method of delivery are significant predictors of weight loss in the newborn (R2=15.5, p<0.01). ROC curve analysis identified an intravenous volume cut-point of 1225 ml that would elicit a high measure of sensitivity (91.3%), and demonstrated significant Kappa agreement (p<0.01) with excess newborn weight loss. It was concluded that infusion of intravenous therapy and natural birth delivery are discriminant factors that influence excess weight loss in newborn infants. Acknowledgement of these factors should be considered in clinical practice.

Investigation of Changes in Prescribed and Voluntary Job Roles in Community Service Delivery for People who have Intellectual Disabilities after the Implementation of the 3 Rs; Rights, Respect and Responsibility Project

The purpose of this thesis was to explore whether there is change in organizational citizenship behaviours in community agency staff following agency adoption of a rights - based service philosophy. Four community agency support staff were interviewed to investigate how residential care providers in services for persons who have intellectual disabilities describe their voluntary job related behaviours following training about human rights. The major finding was that the participants were actively engaged in displaying civic virtue, courtesy, and altruism discretionary behaviours. There was evidence of a post rights training shift in communication patterns with support staff reporting that they used language that prom,oted and advocated for human rights, and reported increased communication exchanges among persons supported by the agency, support staff and managers. Participants also suggested that the individuals they support asserted their rights more frequently and they were more active in their own life choices following rights training.

Letter from Brush Brothers of Buffalo, New York for delivery of bricks and request for remittance

Letter from Brush Brothers of Buffalo, New York for delivery of bricks and request for remittance. This was signed in receipt of materials by S.D. Woodruff on Sept. 10, 1874, Sept. 8, 1875.

Polysaccharide-based Polyion Complex Micelles as New Delivery Systems for Hydrophilic Cationic Drugs

Les micelles polyioniques ont émergé comme des systèmes prometteurs de relargage de médicaments hydrophiles ioniques. Le but de cette étude était le développement des micelles polyioniques à base de dextrane pour la relargage de médicaments hydrophiles cationiques utilisant une nouvelle famille de copolymères bloc carboxymethyldextran-poly(éthylène glycol) (CMD-PEG). Quatre copolymères CMD-PEG ont été préparés dont deux copolymères identiques en termes de longueurs des blocs de CMD et de PEG mais différent en termes de densité de charges du bloc CMD; et deux autres copolymères dans lesquels les blocs chargés sont les mêmes mais dont les blocs de PEG sont différents. Les propriétés d’encapsulation des micelles CMD-PEG ont été évaluées avec différentes molécules cationiques: le diminazène (DIM), un médicament cationique modèle, le chlorhydrate de minocycline (MH), un analogue semi-synthétique de la tétracycline avec des propriétés neuro-protectives prometteuses et différents antibiotiques aminoglycosidiques. La cytotoxicité des copolymères CMD-PEG a été évaluée sur différentes lignées cellulaires en utilisant le test MTT et le test du Bleu Alamar. La formation de micelles des copolymères de CMD-PEG a été caractérisée par différentes techniques telles que la spectroscopie RMN 1H, la diffusion de la lumière dynamique (DLS) et la titration calorimétrique isotherme (ITC). Le taux de relargage des médicaments et l’activité pharmacologique des micelles contenant des médicaments ont aussi été évalués. Les copolymères CMD-PEG n'ont induit aucune cytotoxicité dans les hépatocytes humains et dans les cellules microgliales murines (N9) après 24 h incubation pour des concentrations allant jusqu’à 15 mg/mL. Les interactions électrostatiques entre les copolymères de CMD-PEG et les différentes drogues cationiques ont amorcé la formation de micelles polyioniques avec un coeur composé du complexe CMD-médicaments cationiques et une couronne composée de PEG. Les propriétés des micelles DIM/CMDPEG ont été fortement dépendantes du degré de carboxyméthylation du bloc CMD. Les micelles de CMD-PEG de degré de carboxyméthylation du bloc CMD ≥ 60 %, ont incorporé jusqu'à 64 % en poids de DIM et ont résisté à la désintégration induite par les sels et ceci jusqu'à 400 mM NaCl. Par contre, les micelles de CMD-PEG de degré de carboxyméthylation ~ 30% avaient une plus faible teneur en médicament (~ 40 % en poids de DIM) et se désagrégeaient à des concentrations en sel inférieures (∼ 100 mM NaCl). Le copolymère de CMD-PEG qui a montré les propriétés micellaires les plus satisfaisantes a été sélectionné comme système de livraison potentiel de chlorhydrate de minocycline (MH) et d’antibiotiques aminoglycosidiques. Les micelles CMD-PEG encapsulantes de MH ou d’aminoglycosides ont une petite taille (< 200 nm de diamètre), une forte capacité de chargement (≥ 50% en poids de médicaments) et une plus longue période de relargage de médicament. Ces micelles furent stables en solution aqueuse pendant un mois; après lyophilisation et en présence d'albumine sérique bovine. De plus, les micelles ont protégé MH contre sa dégradation en solutions aqueuses. Les micelles encapsulant les drogues ont maintenu les activités pharmacologiques de ces dernières. En outre, les micelles MH réduisent l’inflammation induite par les lipopolysaccharides dans les cellules microgliales murines (N9). Les micelles aminoglycosides ont été quant à elles capable de tuer une culture bactérienne test. Toutefois les micelles aminoglycosides/CMDPEG furent instables dans les conditions physiologiques. Les propriétés des micelles ont été considérablement améliorées par des modifications hydrophobiques de CMD-PEG. Ainsi, les micelles aminoglycosides/dodecyl-CMD-PEG ont montré une taille plus petite et une meilleure stabilité aux conditions physiologiques. Les résultats obtenus dans le cadre de cette étude montrent que CMD-PEG copolymères sont des systèmes prometteurs de relargage de médicaments cationiques.

Analysis of the Ethical, Social and Legal Issues Related to the Delivery of the Prenatal Genetic Testing in Argentina

L'introduction de nouvelles biotechnologies dans tout système de soins de santé est un processus complexe qui est étroitement lié aux facteurs économiques, politiques et culturels, et, par conséquent, demande de remettre en cause plusieurs questions sociales et éthiques. Dans la situation particulière de l’Argentine - c’est-à-dire: de grandes inégalités sociales entre les citoyens, la rareté des ressources sanitaires, l’accès limité aux services de base, l’absence de politiques spécifiques - l'introduction de technologies génétiques pose de sérieux défis qui doivent impérativement être abordés par les décideurs politiques. Ce projet examine le cas des tests génétiques prénataux dans le contexte du système de santé argentin pour illustrer comment leur introduction peut être complexe dans une nation où l’accès égale aux services de santé doit encore être amélioré. Il faut également examiner les restrictions légales et les préceptes religieux qui influencent l'utilisation des technologies génétiques, ce qui souligne la nécessite de développer un cadre de référence intégral pour le processus d'évaluation des technologies afin d’appuyer l’élaboration de recommandations pour des politiques cohérentes et novatrices applicables au contexte particulier de l’Argentine.

Microgels for oral delivery of therapeutic proteins

Mémoire numérisé par la Division de la gestion de documents et des archives de l'Université de Montréal

A heuristic algorithm for the Capacitated Vehicle Routing Problem with Synchronized Pick-ups and Drop-offs : a case study for medications delivery and supervision in DR Congo

Dans des contextes de post-urgence tels que le vit la partie occidentale de la République Démocratique du Congo (RDC), l’un des défis cruciaux auxquels font face les hôpitaux ruraux est de maintenir un niveau de médicaments essentiels dans la pharmacie. Sans ces médicaments pour traiter les maladies graves, l’impact sur la santé de la population est significatif. Les hôpitaux encourent également des pertes financières dues à la péremption lorsque trop de médicaments sont commandés. De plus, les coûts du transport des médicaments ainsi que du superviseur sont très élevés pour les hôpitaux isolés ; les coûts du transport peuvent à eux seuls dépasser ceux des médicaments. En utilisant la province du Bandundu, RDC pour une étude de cas, notre recherche tente de déterminer la faisabilité (en termes et de la complexité du problème et des économies potentielles) d’un problème de routage synchronisé pour la livraison de médicaments et pour les visites de supervision. Nous proposons une formulation du problème de tournées de véhicules avec capacité limitée qui gère plusieurs exigences nouvelles, soit la synchronisation des activités, la préséance et deux fréquences d’activités. Nous mettons en œuvre une heuristique « cluster first, route second » avec une base de données géospatiales qui permet de résoudre le problème. Nous présentons également un outil Internet qui permet de visualiser les solutions sur des cartes. Les résultats préliminaires de notre étude suggèrent qu’une solution synchronisée pourrait offrir la possibilité aux hôpitaux ruraux d’augmenter l’accessibilité des services médicaux aux populations rurales avec une augmentation modique du coût de transport actuel.

Effect of polymer architecture on Curcumin 1 encapsulation and release from PEGylated polymer nanoparticles: toward a drug delivery nano-platform to the CNS

We developed a nanoparticles (NPs) library from poly(ethylene glycol)–poly lactic acid comb-like polymers with variable amount of PEG. Curcumin was encapsulated in the NPs with a view to develop a delivery platform to treat diseases involving oxidative stress affecting the CNS. We observed a sharp decrease in size between 15 and 20% w/w of PEG which corresponds to a transition from a large solid particle structure to a “micelle-like” or “polymer nano-aggregate” structure. Drug loading, loading efficacy and release kinetics were determined. The diffusion coefficients of curcumin in NPs were determined using a mathematical modeling. The higher diffusion was observed for solid particles compared to “polymer nano-aggregate” particles. NPs did not present any significant toxicity when tested in vitro on a neuronal cell line. Moreover, the ability of NPs carrying curcumin to prevent oxidative stress was evidenced and linked to polymer architecture and NPs organization. Our study showed the intimate relationship between the polymer architecture and the biophysical properties of the resulting NPs and sheds light on new approaches to design efficient NP-based drug carriers.

2D, 3D and 4D active compound delivery in tissue engineering and regenerative medicine

Recent advances in tissue engineering and regenerative medicine have shown that controlling cells microenvironment during growth is a key element to the development of successful therapeutic system. To achieve such control, researchers have first proposed the use of polymeric scaffolds that were able to support cellular growth and, to a certain extent, favor cell organization and tissue structure. With nowadays availability of a large pool of stem cell lines, such approach has appeared to be rather limited since it does not offer the fine control of the cell micro-environment in space and time (4D). Therefore, researchers are currently focusing their efforts on developing strategies that include active compound delivery systems in order to add a fourth dimension to the design of 3D scaffolds. This review will focus on recent concepts and applications of 2D and 3D techniques that have been used to control the load and release of active compounds used to promote cell differentiation and proliferation in or out of a scaffold. We will first present recent advances in the design of 2D polymeric scaffolds and the different techniques that have been used to deposit molecular cues and cells in a controlled fashion. We will continue presenting the recent advances made in the design of 3D scaffolds based on hydrogels as well as polymeric fibers and we will finish by presenting some of the research avenues that are still to be explored.

Chitosan as a wall material for a microencapsulated delivery system for Macrobrachium rosenbergii(de Man) larvae

Chitosan has beenwidely accepted as awall material for preparing microcapsules of various purposes in human medicine. The possibility of using chitosan as a wall material for microencapsulating nutrients and drugs for aquaculture purposes, speci¢cally to Macrobrachium rosenbergii larvae was evaluated in this study. Two types of chitosan-coated microcapsules were prepared using either acetone (MEC-A) or NaOH (MEC-N) as the cross-linking agents. They were compared with a microbound diet relative to total leaching of nutrients and free amino acids (FAA). Among the microcapsules, MEC-N showed the lowest level of total leaching of nutrients (23.3%) during 5 h of immersion in seawater and released 65% FAA after 60min. During laboratory trials,75% larvae had accepted the MEC-N capsule. The results of the study suggest that chitosan can be used as a wall material for preparing microcapsules to deliver drugs and nutrients to M. rosenbergii larvae.

Logistics Network Design with Differentiated Delivery Lead-Time: Benefits and Insights

Most logistics network design models assume exogenous customer demand that is independent of the service time or level. This paper examines the benefits of segmenting demand according to lead-time sensitivity of customers. To capture lead-time sensitivity in the network design model, we use a facility grouping method to ensure that the different demand classes are satisfied on time. In addition, we perform a series of computational experiments to develop a set of managerial insights for the network design decision making process.