Generalised regression estimation for domain class frequencies

This study examines the properties of Generalised Regression (GREG) estimators for domain class frequencies and proportions. The family of GREG estimators forms the class of design-based model-assisted estimators. All GREG estimators utilise auxiliary information via modelling. The classic GREG estimator with a linear fixed effects assisting model (GREG-lin) is one example. But when estimating class frequencies, the study variable is binary or polytomous. Therefore logistic-type assisting models (e.g. logistic or probit model) should be preferred over the linear one. However, other GREG estimators than GREG-lin are rarely used, and knowledge about their properties is limited. This study examines the properties of L-GREG estimators, which are GREG estimators with fixed-effects logistic-type models. Three research questions are addressed. First, I study whether and when L-GREG estimators are more accurate than GREG-lin. Theoretical results and Monte Carlo experiments which cover both equal and unequal probability sampling designs and a wide variety of model formulations show that in standard situations, the difference between L-GREG and GREG-lin is small. But in the case of a strong assisting model, two interesting situations arise: if the domain sample size is reasonably large, L-GREG is more accurate than GREG-lin, and if the domain sample size is very small, estimation of assisting model parameters may be inaccurate, resulting in bias for L-GREG. Second, I study variance estimation for the L-GREG estimators. The standard variance estimator (S) for all GREG estimators resembles the Sen-Yates-Grundy variance estimator, but it is a double sum of prediction errors, not of the observed values of the study variable. Monte Carlo experiments show that S underestimates the variance of L-GREG especially if the domain sample size is minor, or if the assisting model is strong. Third, since the standard variance estimator S often fails for the L-GREG estimators, I propose a new augmented variance estimator (A). The difference between S and the new estimator A is that the latter takes into account the difference between the sample fit model and the census fit model. In Monte Carlo experiments, the new estimator A outperformed the standard estimator S in terms of bias, root mean square error and coverage rate. Thus the new estimator provides a good alternative to the standard estimator.

Process of burnout: structure, antecedents, and consequences

The major changes that have been witnessed in today's workplaces are challenging the mental well-being of employed people. Stress and burnout are considered to be modern epidemics, and their importance to physical health and work ability has been acknowledged world-wide. The aim of the thesis was to study the concept of burnout as a process proceeding from its antecedents, through the development of the syndrome, and to its outcomes. Several work-related factors considered antecedents of burnout were studied in different occupational groups. The syndrome of burnout is seen as consisting of three dimensions - exhaustion, cynicism and lack of professional efficacy - and different alternatives for the sequential development of these dimensions were tested. Furthermore, several indicators of the severely detrimental health and work ability outcomes of burnout were investigated in a longitudinal study design. The research questions were as follows. 1) Is burnout, as measured with the Maslach Burnout Inventory - General Survey (MBI-GS), a three-dimensional construct and how invariant is the factorial structure across occupations (Finnish) and national samples (Finnish, Swedish and Dutch)? How persistent is exhaustion over time? 2) What is the sequential process of burnout? Is it similar across occupations? How do work stressors relate to the process? 3) How does burnout relate to severe health consequences as well as temporary and chronic work disability according to hospitalization periods, sick-leave episodes and receiving disability pensions? The data were collected between 1986 and 2005. The population of the study consisted of respondents to a company-wide questionnaire survey carried out in 1996-1997 (N=9705, response rate 63%). The participants comprised 6025 blue-collar workers and 3680 white-collar workers. The majority were men (N=7494) and the average age was 43.7 years. In addition, a sample from the population had responded to a questionnaire survey in 1988, which was combined with the 1996 data to form panel data on 713 respondents. The register-based data were collected between 1986 and 2005 from 1) the company's occupational health services' records for a sample of respondents from the 1996 questionnaire survey (sick-leave data), 2) hospitalization records from the Hospital discharge register, and 3) disability pension records from the Finnish Centre for Pensions. These data were combined person by person with the 1996 questionnaire survey data with the help of personal identification numbers which were saved with the study numbers by the researchers. The results showed that burnout consists of three separate but correlating symptoms: exhaustion, cynicism and lack of professional efficacy. As a syndrome, burnout was strongly related to job stressors at work, and seemed to develop from exhaustion through cynicism to lack of professional efficacy in a similar manner among white-collar and blue-collar employees. The results also showed that exhaustion persisted even after eight years of follow-up but did not predict cynicism or lack of professional efficacy after that amount of time. Nor were job stressors longitudinally related to burnout. Longitudinal results were obtained for the severe health-related consequences of burnout. The investigated outcomes represented different phases of health deterioration ranging from sick-leaves and hospitalization periods to receiving work disability pensions. The results showed that burnout syndrome, and its elements of exhaustion and cynicism, were related to future mental and cardiovascular disorders as indicated by hospitalization periods. Burnout was also related to future sick-leave periods due to mental, cardiovascular and musculoskeletal disorders. Of the separate elements, exhaustion was related to the same three categories of disorder, cynicism to mental, musculoskeletal and digestive disorders, and lack of professional efficacy to mental and musculoskeletal disorders. Burnout also predicted receiving disability pensions due to mental and musculoskeletal disorders among initially healthy subjects. Exhaustion was related to receiving disability pensions even when self-reported chronic illness was taken into account. The results suggest that burnout is a multidimensional, chronic, work-related syndrome, which may have serious consequences for health and work ability.

Ideas generated in conceptual design and their effects on creativity

Search of design spaces to generate solutions affects the design outcomes during conceptual design. This research aims to understand the different types of search that occurs during conceptual design and their effect on the design outcomes. Additionally, we study the effect of other factors, such as creativity, problem-solving style, and experience of designers, on the design outcomes. Two sets of design experiments, with experienced and novice designers, are used in this study. We find that designers employ twelve different types of searches during conceptual design for problem understanding, solution generation, and solution evaluation activities. Results also suggest that creativity is influenced positively by the type and amount of searches, duration of designing, and experience of designers.

Environmental Mechanics Research in China

By recalling mankind's path during past 50 years in the present article, we mainly highlight the significance of environmental issues today. In particular, two major factors leading to environment deterioration in China such as water resources and coal burning are stressed on. Present-day environmental issues are obviously interdisciplinary, of multiple scales and multi-composition in nature. Therefore, a process-based approach for environment research is absolutely necessarily. A series of sub-processes, either physical, chemical or biological, are subsequently analyzed in order to established reasonable parameterization scheme and credible comprehensive model. And we are now in a position to answer questions still open to us, improve existing somewhat empirical engineering approaches and enhance quantitative accuracy in prediction. To illustrate this process-based research approach, three typical examples associated with the Yangtze River Estuary, Loess Plateau and Tenggeli Desert environments have been dealt with respectively. A theoretical model of vertical flow field accounting for runoff and tide interaction has been established to delineate salinity and sediment motion which are responsible for the formation of mouth bar at the outlet and the ecological evolution there. A kinematic wave theory combined with the revised Green-Ampt infiltration formula is applied to the prediction of runoff generation and erosion in three types of erosion region on the Loess Plateau. Three approaches describing water motion in SPAC system in arid areas at different levels have been improved by introducing vegetation sub-models. However, we have found that the formation of a dry sandy layer and biological crust skin are additional primary causes leading to deterioration of water supply and succession of ecological system.

Workshop on marine mammal research & monitoring in the National Marine Sanctuaries, Wailea, Maui, Hawaii, 28 November 1999

The Second National Workshop on Marine Mammal Research and Monitoring in the National Marine Sanctuaries was held on 28 November 1999 in Maui, Hawaii. The workshop preceded the Thirteenth Biennial Conference on the Biology of Marine Mammals, and provided an opportunity to review and promote marine mammal research and monitoring in the National Marine Sanctuaries (NMS). The purpose of the workshop was to bring together researchers and sanctuary staff and to improve marine mammal research and monitoring throughout the sanctuaries. Discussion topics included: potential multi-sanctuary projects, sources of funding for multi-sanctuary projects, services and equipment for researchers through the sanctuaries, consolidating small levels of funding, help in funding and support for writing up data, publishing documents in Technical Memoranda, and letters of support. Representatives from the NMS national office and nine sanctuaries provided participants with overviews of marine mammal research within the sanctuaries. Presentations were also given by representatives from the National Marine Fisheries Service’s Permits and Health and Stranding programs. During the breakout working groups, there were several comments and suggestions consistent among each of the groups to improve marine mammal research. Each group emphasized the need to improve communication among researchers and to better share data. These suggestions included web-based information networks, advisory panels, and workshops. Regionally based research projects were also emphasized. In order to best study marine mammal populations, collaborative studies must take place throughout multiple sanctuaries. In order to achieve these large scale studies, funding and staffing must be directed towards these studies and distributed among each of the sanctuaries so that they may all be able to have the staffing, equipment, and vessels necessary to achieve a collaborative, ecosystem-based, regional marine mammal monitoring program. It will take several years to achieve all of the suggestions from the workshop, but thanks to the workshop participants, the National Marine Sanctuary Program has begun to direct marine mammal research and monitoring in order to achieve the goals of the workshop. This document provides a summary of the workshop with a focus on key points/main issues. We have included contact information intended to encourage continued collaboration among the individuals and organizations represented at the 1999 Marine Mammal Research and Monitoring in the National Marine Sanctuaries Workshop. (PDF contains 71 pages.)

Split-aperture laser pulse compressor design tolerant to alignment and line-density differences

We introduce a four-pass laser pulse compressor design based on two grating apertures with two gratings per aperture that is tolerant to some alignment errors and, importantly, to grating-to-grating period variations. Each half-beam samples each grating in a diamond-shaped compressor that is symmetric about a central bisecting plane. For any given grating, the two half-beams impinge on opposite sides of its surface normal. It is shown that the two split beams have no pointing difference from paired gratings with different periods. Furthermore, no phase shift between half-beams is incurred as long as the planes containing a grating line and the surface normal for each grating of the pair are parallel. For grating pairs satisfying this condition, gratings surfaces need not be on the same plane, as changes in the gap between the two can compensate to bring the beams back in phase. © 2008 Optical Society of America.

Pesquisa-design formação: uma proposta metodológica para a produção de Recursos Educacionais Abertos na cibercultura

Essa pesquisa inspirou-se nos movimentos sociais recentes relacionados à abertura de materiais digitais para compartilhamento, (re) uso e remixagem no ciberespaço. Assim, partimos da seguinte problemática: como desenvolver atos de currículo capazes de contribuir para a produção de Recursos Educacionais Abertos (REA) para a docência e aprendizagem na cibercultura? O objetivo foi desenvolver um dispositivo-metodológico como ato de currículo que atualiza a pesquisa-formação para o design de situações de aprendizagemensino e de artefatos pedagógicos que contemplem a autoria dos praticantes culturais. Para atingir o proposto, foi desenvolvido um dispositivo que atualiza o método da pesquisa-formação para a docência e aprendizagem na cibercultura (SANTOS, 2005; 2014) com alguns princípios da pesquisa-design (GRAVEMEIJER; COBB, 2006; van den AKKER, 1999; BROWN, 1992; COLLINS, 1992; NEWMAN, 1990; KELLY, 2003; RAMOS; STRUCHINER, 2008) para propiciar a produção de artefatos digitais utilizando os recursos oferecidos pelas plataformas da Web 2.0. A pesquisa-design formação, como método e o design interativo aberto como dispositivo, foram criados com o objetivo de sistematizar o processo de construção e implementação de atos de currículos e arquitetar percursos abertos em plataformas da Web 2.0. A metodologia proposta parte da bricolagem da pesquisa-formação multirreferencial na cibercultura com a pesquisa-design. A pesquisa está estruturada em quatro conceitos-tema importantes: a) educar na cibercultura: mídias em destaque; b) Design na Web 2.0: faça você mesmo e de preferência acompanhado; c) Professor-autor e a sua construção epistemológica e metodológica, e; d) Professor-autor em formação: enunciação, negociação e autoria. Essa pesquisa revelou alguns achados nas dimensões referente ao design como produto e processo, método e atos de currículo, que têm a intenção de contribuir para: a) a sistematização de processos de aprendizagemensino, promovendo a produção de artefatos digitais abertos por professores e alunos; b) o design estrutural e proposicional das atividades pedagógicas; c) a formação de sujeitos-autores na cibercultura. Portanto, esta pesquisa contribuiu para a autorização e autonomização dos praticantes culturais através da metodologia pesquisa-design formação bem como a disponibilização de materiais digitais abertos na cibercultura.

1-3 Piezocomposite design optimised for high frequency kerfless transducer arrays

Piezocomposites that can operate at frequencies above 30 MHz without spurious modes are required in order to develop sufficiently sensitive high frequency arrays for high resolution imaging. However, scaling down of conventional piezocomposite fabrication techniques becomes increasingly difficult as dimensions decrease with increasing frequency. The approach presented here is to use micro-moulded 1-3 piezocomposites and a distribution of piezoelectric segment size and separation. Innovative approaches to composite pattern design, based on a randomized spatial distribution, are presented. Micro-moulding techniques are shown to be suitable for fabricating composites with dimensions required for high frequency composites. Randomized piezocomposite patterns are modeled and are shown to suppress spurious modes.

Product Service Systems and supply network relationships: An exploratory case study

Purpose - In recent years there has been increasing interest in Product Service Systems (PSSs) as a business model for selling integrated product and service offerings. To date, there has been extensive research into the benefits of PSS to manufacturers and their customers, but there has been limited research into the effect of PSS on the upstream supply chain. This paper seeks to address this gap in the research. Design/methodology/approach - The research uses case-based research which is appropriate for exploratory research of this type. In-depth interviews were conducted with key personnel in a focal firm and two members of its supply chain, and the results were analysed to identify emergent themes.b Findings - The research has identified differences in supplier behaviour dependent on their role in PSS delivery and their relationship with the PSS provider. In particular, it suggests that for a successful partnership it is important to align the objectives between PSS provider and suppliers. Originality/value - This research provides a detailed investigation into a PSS supply chain and highlights the complexity of roles and relationships among the organizations within it. It will be of value to other PSS researchers and organizations transitioning to the delivery of PSS. © Emerald Group Publishing Limited.