894 resultados para DISINFECTION BY-PRODUCTS
Resumo:
The petroleum industry deals with problems which are difficult to solve because of their relation to environmental issues. This is because amounts of residue are generated which vary in type and danger level. The soil contamination by non aqueous liquid phase mixtures, specifically hydrocarbon petroleum has been a reason for great concern, mainly the aromatic and polycyclic aromatic, which present risk to human health due to its carcinogenic and mutagenic character. The Advanced Oxidative Processes (AOP) are efficient technologies for destruction of organic compounds of difficult degradation and, often, they are present in low concentrations. They can be considered clean technologies, because there is no formation of solid by-products or the transfer of pollutor phases. This work focuses on the study of the degradation of petroleum industrial waste, by Advanced Oxidation Processes. Treatments tackling petroleum residues, contaminated soil, and water occurring in the production of petroleum reached the following Polycyclic Aromatic Hydrocarbons (PAH) degradation levels: solid residues 100% in 96 treatment hours; water residue - 100% in 6 treatment hours; soil contamination (COT degradation) - 50.3% in 12 treatment hours. AOP were effective in dealing with petroleum residues thus revealing themselves to be a promising treatment alternative
Resumo:
Natural gas, although basically composed by light hydrocarbons, also presents contaminant gases in its composition, such as CO2 (carbon dioxide) and H2S (hydrogen sulfide). The H2S, which commonly occurs in oil and gas exploration and production activities, causes damages in oil and natural gas pipelines. Consequently, the removal of hydrogen sulfide gas will result in an important reduction in operating costs. Also, it is essential to consider the better quality of the oil to be processed in the refinery, thus resulting in benefits in economic, environmental and social areas. All this facts demonstrate the need for the development and improvement in hydrogen sulfide scavengers. Currently, the oil industry uses several processes for hydrogen sulfide removal from natural gas. However, these processes produce amine derivatives which can cause damage in distillation towers, can cause clogging of pipelines by formation of insoluble precipitates, and also produce residues with great environmental impact. Therefore, it is of great importance the obtaining of a stable system, in inorganic or organic reaction media, able to remove hydrogen sulfide without formation of by-products that can affect the quality and cost of natural gas processing, transport, and distribution steps. Seeking the study, evaluation and modeling of mass transfer and kinetics of hydrogen removal, in this study it was used an absorption column packed with Raschig rings, where the natural gas, with H2S as contaminant, passed through an aqueous solution of inorganic compounds as stagnant liquid, being this contaminant gas absorbed by the liquid phase. This absorption column was coupled with a H2S detection system, with interface with a computer. The data and the model equations were solved by the least squares method, modified by Levemberg-Marquardt. In this study, in addition to the water, it were used the following solutions: sodium hydroxide, potassium permanganate, ferric chloride, copper sulfate, zinc chloride, potassium chromate, and manganese sulfate, all at low concentrations (»10 ppm). These solutions were used looking for the evaluation of the interference between absorption physical and chemical parameters, or even to get a better mass transfer coefficient, as in mixing reactors and absorption columns operating in counterflow. In this context, the evaluation of H2S removal arises as a valuable procedure for the treatment of natural gas and destination of process by-products. The study of the obtained absorption curves makes possible to determine the mass transfer predominant stage in the involved processes, the mass transfer volumetric coefficients, and the equilibrium concentrations. It was also performed a kinetic study. The obtained results showed that the H2S removal kinetics is greater for NaOH. Considering that the study was performed at low concentrations of chemical reagents, it was possible to check the effect of secondary reactions in the other chemicals, especially in the case of KMnO4, which shows that your by-product, MnO2, acts in H2S absorption process. In addition, CuSO4 and FeCl3 also demonstrated to have good efficiency in H2S removal
Resumo:
Biotechnological conversion of biomass into fuels and chemicals requires hydrolysis of the polysaccharide fraction into monomeric sugars. Hydrolysis can be performed enzymatically and with dilute or concentrate mineral acids. The present study used dilute sulfuric acid as a catalyst for hydrolysis of Eucalyptus grandis residue. The purpose of this paper was to optimize the hydrolysis process in a 1.41 pilot-scale reactor and investigate the effects of the acid concentration, temperature and residue/acid solution ratio on the hemicellulose removal and consequently on the production of sugars (xylose, glucose and arabinose) as well as on the formation of by-products (furfural, 5-hydroxymethylfurfural and acetic acid). This study was based on a model composition corresponding to a 2 3 orthogonal factorial design and employed the response surface methodology (RSM) to optimize the hydrolysis conditions, aiming to attain maximum xylose extraction from hemicellulose of residue. The considered optimum conditions were: H2SO4 concentration of 0.65%, temperature of 157 degrees C and residue/acid solution ratio of 1/8.6 with a reaction time of 20 min. Under these conditions, 79.6% of the total xylose was removed and the hydrolysate contained 1.65 g/l glucose, 13.65 g/l xylose, 1.55 g/l arabinose, 3.10 g/l acetic acid, 1.23 g/l furfural and 0.20 g/l 5-hydroxymethylfurfural. (c) 2006 Published by Elsevier Ltd.
Resumo:
Com o objetivo de avaliar a influência da composição química do substrato no cultivo do cogumelo comestível Pleurotus florida, seis resíduos agrícolas foram testados: palha de arroz, palha de feijão, palha de trigo, folha de bananeira, palha de sorgo e sabugo de milho. O substrato palha de feijão apresentou resultados semelhantes para a produção (189,8 g kg-1), eficiência biológica (89,2%) e número de cogumelos (12) à palha de arroz, substrato utilizado tradicionalmente no cultivo de Pleurotus em escala comercial. Não foi possível atribuir apenas a um fator químico as altas produções e eficiências biológicas observadas em palha de arroz e palha de feijão e muito menos para a baixa produção em palha de sorgo (77,8 g kg-1) e sabugo de milho (53,2 g g-1). No geral, substratos com relação C/N em torno de 45 (N = 1,0%), maior conteúdo de cinzas, acrescido de altos teores de P, K, Ca, Mg and Mn foram os melhores para o cultivo de P. florida.
Resumo:
Combating pollution of soils is a challenge that has concerned researchers from different areas and motivated the search for technologies that aim the recovery of degraded soils. Literature shows numerous processes that have been proposed with the intent of remediating soils contaminated by oils and other by-products of the oil industry, considering that the processes available have, generally, high operating costs, this work proposes a costeffective alternative to the treatment of Diesel-contaminated soils. The washing solutions were prepared using water as aqueous phase, the saponified coconut oil (OCS) as surfactant and n-butanol as co-surfactant. In this study, the soil was characterized by physical and chemical analyses. The study of diesel desorption from the soil was held in bath, using hexane and washing solutions, which had 10 and 20 wt.% active matter (AM - co-surfactant/surfactants) respectively. The study of the influence of active matter concentration and temperature in bath agitated used an experimental planning. The experiment also developed a system of percolation in bed to wash the soil and studied the influence of the concentration of active substance and volume of washing solution using an experimental planning. The optimal times to achieve hexane extraction were 30 and 180 min, while the best results using a 10% AM was 60 min and using a 20% AM was 120 min. The results of the experimental planning on bath showed that the maximum diesel removal was obtained when at a 20 wt.% of AM and under 50 °C, removing 99.92% of the oil. As for experiments in the system of percolation soil bed, the maximum diesel removal was high when the volume of the washing solution was of 5 L and the concentration of 20% AM. This experiment concluded that the concentration of AM and the temperature were vital to bath experiments for diesel removal, while in the system of percolation soil bed only concentration of AM influenced the soil remediation
Resumo:
The crop of the sugarcane is stood out in the Brazilian agricultural scenery, due to the great demand of sugar, alcohol and by-products. The present work had as objective to evaluate the effect of five doses and three sources of manganese applied at planting furrow in sugarcane, in two cuts, in the Northwest area of São Paulo State, Brazil. The experiment was conducted at Fujimoto farm with coordinates 20 degrees 32 'S and 50 degrees 58' O, and altitude of 361 meters, area administered by Distillery Vale do Parana S/A Alcool and Acucar, in Suzanapolis county - São Paulo state. A randomizef blocks design in a factorial scheme 5x3, being 5 doses of manganese (0; 2.5; 5.0; 7.5 and 10.0 kg ha(-1)), and 3 sources (Quelate, FTE and manganese sulfate), applied at planting furrow, in 4 repetitions was used. The plots were constituted by 4 lines of 5 m length, spaced by 1.5 m. The RB 86-7515 variety was used. The sources of manganese did not influence in the technological quality and productivity of stems in none of the cuts of sugarcane. The application of doses of manganese resulted in increase on values of recoverable total sugar per ha and ton of pol per ha in plant cane, not influencing in the other variables analyzed on plant cane and ratoon cane.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Foram utilizados 1600 pintos de corte de um dia de idade, distribuídos em delineamento, em blocos ao acaso, com esquema fatorial 4×2 (quatro linhagens, sendo uma delas comercial (Ross-308) e as demais específicas para a produção colonial (Caipirinha, Pescoço Pelado e Paraíso Pedrês) e dois sistemas de criação (confinado e com acesso a piquete), com quatro repetições de 50 aves cada. A ração não continha promotores químicos de crescimento e produtos de origem animal. Avaliaram-se o ganho de peso, o consumo de ração, a conversão alimentar, a mortalidade e os rendimentos de carcaça e das partes (peito, pernas, asas e dorso) aos 56, 63, 70, 77 e 84 dias de idade. O comprimento e a porcentagem (em relação ao peso vivo) dos intestinos e o peso e a porcentagem (em relação ao peso vivo) do fígado, moela e pâncreas foram avaliados aos 84 dias de idade. Houve efeito (P<0,05) da linhagem para as características de desempenho e da linhagem e do sexo para rendimentos da carcaça e das partes, assim como para as características do sistema digestório (P<0,05). O sistema de criação não influenciou as características avaliadas.
Resumo:
The effects of silver insertion on the TiO(2) photocatalytic activity for the degradation of diclofenac potassium were reported here. Techniques such as X-ray diffraction, scanning electron microscopy and UV-Vis spectroscopy were used to comprehend the relation between structure and properties of the silver-modified TiO(2), thin films obtained by the sol-gel method. The lattice parameters and the crystallinity of TiO(2) anatase phase were affected by inserted silver, and the film thickness increased about 4 nm for each 1 wt.% of silver inserted. The degradation of diclofenac potassium and by-products reached an efficiency of 4.6 mg(C) W(-1) when the material was modified with silver. Although the first step of degradation involves only the photochemical process related to the loss of the chlorine and hydrogen atoms. This cyclization reaction leads to the formation of intermediate, which degradation is facilitated by the modified material. (C) 2007 Elsevier B.V. All rights reserved.
Resumo:
Foi realizado um trabalho para determinar o aproveitamento alimentar da farinha de carne e ossos (FCO), farinha de vísceras de aves (FVA) e farinha de peixe (FP) em tartaruga-da-amazônia, por meio dos coeficientes de digestibilidade aparente (CDA) da matéria seca (MS), proteína bruta (PB), extrato etéreo (EE) e energia bruta (EB). Os animais experimentais foram 136 filhotes provenientes do Projeto Quelônios da Amazônia, no estado do Mato Grosso, mantidos em caixas com renovação de água e temperatura média de 29ºC. Os CDA foram determinados com dietas contendo 0,1% do marcador óxido de crômio III (Cr2O3). Os CDA da MS, PB, EE e EB foram, respectivamente, de 79,10; 87,61; 93,83 e 79,61% para FCO; 92,45; 94,89; 96,55 e 92,71% para FV e 93,53; 95,13; 94,05 e 93,18% para FP. Os melhores coeficientes foram obtidos com a farinha de peixe e a farinha de vísceras de aves.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)