Produção e aplicação de adubo orgânico, proveniente da compostagem de resíduos da FCT/UNESP

This work presents the objective of producing organic fertilizer from the waste generated at FCT/UNESP and its use in the growing sunflower. For this, there were collected wastes of pruning/weeding and organic waste from the canteen. It were made two types of treatments, one conventional and the other mechanized, using three mass ratios: ratio 1 (30% wastes of pruning/weeding (RP) + 70% organic waste (RC)), ratio 2 (50% RP + 50% RC) and ratio 3 (70% RP + 30% RC). The conventional system was done windrow with turning manual and the mechanized system was developed in reactors by injecting compressed air. The compounds produced were analyzed in terms of pH, organic matter, organic carbon, mineral residue, nitrogen, phosphorus and potassium, which could be compared to the values stipulated by the Instrução Normativa n° 25 de 23/07/2009 do Ministério da Agricultura, Pecuária e Abastecimento. The compounds produced were used on growing sunflowers in 14 different conditions for the systems manual and mechanized, totaling 26 treatments with the following proportions... (Complete abstract click electronic access below)

Avaliação da influência da esterilização por radiação gama nas propriedades mecânicas, estruturais e na biocompatibilidade de matrizes híbridas orgânico-inorgânicas

Atualmente, as pesquisas acadêmicas e industriais não estão voltadas apenas para a descoberta de novos fármacos, mas também para novas maneiras de administração de medicamentos pretendendo obter melhores ações farmacológicas alem de reduzir efeitos colaterais. Partindo deste pressuposto, estudos demonstram que inúmeras moléculas podem ser incorporadas a polímeros híbridos orgânico-inorgânico preparados pelo processo sol-gel, assim pretende-se estudar a possibilidade de sua aplicação no desenvolvimento de um dispositivo de liberação controlada de fármacos na forma de implantes subcutâneos. As matrizes hibridas para serem implantadas devem, necessariamente, ser estéreis. Para isto este trabalho analisa a interação entre o processo de esterilização e uma provável alteração estrutural nestes polímeros. A esterilização por calor úmido em autoclave e a esterilização por radiação gama foram escolhidas para analisar a correlação entre alteração estrutural do hibrido e o processo de eliminação de microorganismos. Outro aspecto que levamos em consideração foi a melhora das características mecânicas das matrizes poliméricas confeccionadas com poli óxido etileno de peso molecular 1900 (POE 1900) e poli óxido propileno de peso molecular 400 (POP 400). Para serem implantadas estas matrizes devem estar uniformes, e não podem trincar ou quebrar antes ou após a implantação. Considerando estes fatores foi adicionado as amostras um agente plastificante, o álcool polivinílico (PVA), na tentativa de melhorar estas características

Propriedades térnicas de géis e xerogéis híbridos de sílica/orgânico à base de GPTS-TEOS com diferentes concentrações de GPTS

In the present work the thermal characteristics of gels and xerogels of Silica/organic hybrids derived from different concentrations of GPTS-TEOS were investigated by thermal analysis (TG, DTA, and DSC). The preparation of gels of the Silica/organic hybrid matrix was held through the sol-gel process, consisting by the hydrolysis of alkoxides GPTS and TEOS in proportion (1:1) and (1:2) that was promoted in acidic conditions under reflux and stirring at 80oC/2h, producing the matrix in the colloidal state (sol). Gels were prepared by addition of NH4OH to the sol, promoting gelation of sol in sealed plastics containers. Part of the gels samples was analyzed by TG, DTS and DSC techniques in order to characterize water loss and degradation of the polymeric “epoxy” groups present in the structure of the silica derived from the GPTS alkoxide. Another set of samples was dried at 80oC/48h to obtain xerogels (dried gels) and analyzed by the same techniques. We obtained the characteristics temperatures of the matrix by the techniques DTA, DSC and TG, under measurements of thermal analysis until 800oC and 600oC in case of DSC. By thermal analysis (TG, DTA, and DSC) the main endothermic events (loss of water, melting, pyrolysis) and exothermic events (burning of the polymer) of the GPTS-TEOS matrix were determined

Síntese de membranas à base de híbridos orgânico-inorgânicos para implantes odontológicos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Aplicação do ciclo rankine orgânico alimentado termicamente pela queima da casca do arroz e resíduos de madeira

With the growing world energy demand mainly from developing countries like Brazil, Russia, India and China, the search for efficient sources of energy becomes a challenge for the coming years. Among the most widely used alternative sources, biomass is the one that grows in a more pronounced way. This study will assess the real possibility of having it as a heat source in an Organic Rankine Cycle, which employ heat transfer fluids as working fluids instead of water. From a regional data collection in agricultural production and their potential rice production and the resulting husk was defined as more appropriate. The availability of husks together with an amount of eucalyptus wood, provided by a company in the region on a monthly basis, were analyzed, and the low participation of the wood was discarded by the thermal contribution of little significance. Based on this, it was established the calorific value of fuel for thermodynamic calculations and the cycle to be used. It was then carried out the choice of working fluid from the literature and their availability in the library of software used for the simulations, the Engineering Equation Solver - ESS. The fluid most appropriate for the burning of biomass, Octamethyltrisiloxane (OMTS), was not included in the software and so the R227ea and R134a were selected. After the initial parameters modeling definition, as condensing temperature, efficiency and live steam conditions, the simulations were performed, and only the R227ea remained within the feasible thermodynamic and technological ranges. With this fluid the turbine power output was 265.7 [kW] for a scenario of 24 hours/day burning, 800.3 [kW] to biomass burning for 8 hours/day and 2134 [kW] for burning only 3 hours/day. The thermal efficiency of the cycle remained in the range of 6%, and for plants operating with the most... (Complete Abstract click eletronic access below)

Manejo da adubação na cultura do feijão em sistema orgânico de produção

Pós-graduação em Agronomia - FEIS

Diodo planar orgânico Schottky: construção e caracterização

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Fontes e doses de fósforo na presença e ausência de composto orgânico no estado nutricional e na produtividade da cana-de-açúcar

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Tipos de condução de hastes na produção e na qualidade de mini tomate em manejo orgânico

Pós-graduação em Agronomia (Horticultura) - FCA

Efeito do adubo orgânico na diversidade bacteriana de solos

Pós-graduação em Microbiologia Agropecuária - FCAV

Composto orgânico de agroindústrias na produção de feijão de inverno e milho no sistema plantio direto

Pós-graduação em Agronomia - FEIS

Solubilización de fuentes de fósforo asociadas a un compuesto orgánico enriquecido con biofertilizantes

The enrichment of an organic compound with biofertilizers of microorganisms (solubilizing phosphorus bacteria, BSF) can improve the properties of phosphate fertilizers applied to soils to increase nutrient availability. The experimental design was randomized complete blocks with a factorial 4x2 +1 arrangement of treatments: 1) four sources of phosphorus: phosphate rock, natural phosphate, triple superphosphate (TSP) and Cuban phosphate rock; 2) two sources of bio-fertilizer prepared from filter cake (cane waste) enriched with microorganisms and no enrichment; 3) and an absolute control (no filter cake or fertilizer); repeated three times. Data was analyzed with ANOVA and treatment means were compared using Tukey (p <= 0.05). Assessments of available P (Bray-2 and Oniani methodology) and the quantification of total and solubilizing bacteria and fungi in the soil were performed 30, 60 and 90 d after starting the experiment. After 60 d, the population of BSF was lower in the control (p <= 0.05) and the content of P (Bray-2) was higher for SFT (p <= 0.01). The application of the bio-fertilizer increased the P content compared to the control. At 90 d P (Bray-2) increased with the SFT treatment, which also increased (p P in the soil at 60 and 90 d regardless of the presence of microorganism-enriched bio-fertilizer. The use of filter cake enriched with microorganisms associated with different sources of P, and applied to the soil with a high content of P, did not change the soil populations of total and solubilizing bacteria and fungi in the short term. TSP promoted the highest levels of P in the soil, irrespective of the presence of the organic compound enriched with P solubilizing microorganisms.

Fabricação e caracterização de diodo Schottky orgânico com arquitetura planar

Usually organic polymeric diodes are made with a semiconductor layer placed between two electrodes in a sandwich-like architecture, where the electrodes are deposited on the surfaces of a polymeric semiconductor film. This methodology leads to two main problems: i) the polymeric film top surface is rough and irregular, resulting in non-uniform electric field into the device; ii) during the deposition of metallic electrode in the top surface polymeric film, by thermal evaporation, occurs the diffusion of metal atoms into the polymeric film, changing the material electronic structure. Thus, the metal-semiconductor junction is not well defined, which is essential for the production of good quality Schottky diode, which exhibits ideality factor close to the unity and low turn-on voltage. In order to avoid these two problems, in the present research was proposed to manufacture an organic diode with the semiconductor polymeric layer deposited over bimetallic (gold and aluminum) interdigitated electrodes. The doping of the active layer was performed by immersing the device in hydrochloric acid solution with pH 2 during different times in order to promote different doping levels of the semiconductor polymer. Was verified that the proposed diode, which exhibits well-defined metal-semiconductor junction, operates as a Schottky diode, with good ideality factor, 10 ± 3, and low turn-on voltage, 1,2 ± 0,2 V, in comparison with conventional organic polymeric diodes. Contrasting with the ideality factor and turn-on voltage, the diode rectification ratio was obtained as 7, a value lower than the expected for a good organic diode. Was also showed that the diode characteristics were dependent on the semiconductor polymer doping level, and that the diode characteristics were optimized with doping promoted by immersion in the acid solution for times longer than 50 s. Furthermore, as was showed that the diodes properties are dependent on the semiconductor...

Materiais híbridos de sílica/orgânico dopados com rodamina-B: estudo da luminescência e preparação de filmes finos para aplicações em fotônica

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)