BIOMOD - a platform for ensemble forecasting of species distributions

BIOMOD is a computer platform for ensemble forecasting of species distributions, enabling the treatment of a range of methodological uncertainties in models and the examination of species-environment relationships. BIOMOD includes the ability to model species distributions with several techniques, test models with a wide range of approaches, project species distributions into different environmental conditions (e.g. climate or land use change scenarios) and dispersal functions. It allows assessing species temporal turnover, plot species response curves, and test the strength of species interactions with predictor variables. BIOMOD is implemented in R and is a freeware, open source, package

Microfabrics in carbonate mylonites along a large-scale shear zone (Helvetic Alps)

Carbonate mylonites with varying proportions of second-phase minerals were collected at positions of increasing metamorphic grade along the basal thrust of the Morcles nappe (Helvetic nappes, Switzerland). Variations of temperature, stress, and strain rate, changes in chemistry of solid and fluid phases, and differing degrees of strain localization and annealing were tracked by measuring the shapes, mean sizes, and size distributions of both matrix and second-phase grains, as well as crystal preferred orientation (CPO) of the matrix. Field structures suggest that strain rate was constant along the fault. The mean and distribution of the calcite grain sizes were affected most profoundly by temperature: Increased temperature, presumably accompanied by decreased stress, correlated with larger mean sizes and wider size distributions. At a given location, the matrix grains in mylonites with more second-phase particles are, on average, smaller, have narrower size distributions, and have more elongate shapes. For example, mylonites with 50 vol.% of second phases have matrix grain sizes half that of pure mylonites. Changes in calcite chemistry and the presence of synkinematic fluids seemed to influence microfabric only weakly. Temporal variations in conditions, such as exhumation-induced cooling, apparently provoke changes in temperature, stress, and strain rate along the nappe. These changes result in further strain localization during retrograde conditions and cause the grain size to be reduced by an additional 50%. The matrix CPO strengthens with increasing temperature or strain, but weakens and rotates with increasing second-phase content, These fabric changes suggest differing rates of grain growth, grain size reduction, and development of CPO owing to variations in the deformation conditions and, perhaps, mechanisms. To interpret natural mylonite structures or to extrapolate mechanical data to natural situations requires careful characterization of the microfabric, and, in particular, second-phase minerals. (c) 2007 Elsevier B.V, All rights reserved.

Determination of sea surface salinity and wind speed by L-band microwave radiometry from a fixed platform

The European Space Agency Soil Moisture andOcean Salinity (SMOS) mission aims at obtaining global maps ofsoil moisture and sea surface salinity from space for large-scale andclimatic studies. It uses an L-band (1400–1427 MHz) MicrowaveInterferometric Radiometer by Aperture Synthesis to measurebrightness temperature of the earth’s surface at horizontal andvertical polarizations ( h and v). These two parameters will beused together to retrieve the geophysical parameters. The retrievalof salinity is a complex process that requires the knowledge ofother environmental information and an accurate processing ofthe radiometer measurements. Here, we present recent resultsobtained from several studies and field experiments that were partof the SMOS mission, and highlight the issues still to be solved.

Contribution to the geology of Southern Turkey: new insights from the Mersin mélanges and from the Lycian and Antalya nappes

Abstract The study of fossil Tethyan continental margins implies the consideration of the oceanic domains to which they were connected. The advent of plate tectonics confirmed the importance of the detection of accretion-related mélanges. Ophiolitic mélanges are derived from both an upper ophiolitic obducting plate and a lower oceanic plate. Besides ophiolitic elements, the mélanges may incorporate parts of a magmatic arc and dismembered fragments of a passive continental margin. As the lower plate usually totally disappears during the obduction process, it can only be reconstructed from its elements found in the mélanges. Because of their key location at active margin boundaries, preserved accretion-related mélanges provide strong constraints on the geological evolution of former oceanic domains and their adjacent margins. The identification of Palaeotethyan remnants as accretionary series or reworked during the Late Triassic Eo-Cimmerian event, as well as the recognition of HugluPindos marginal sequences in southern Turkey and in the external Hellenides represent the main achievements of this work, making possible to establish new palaeogeographical correlations. The Mersin mélanges (Turkey), together with the Antalya and Mamonia (Cyprus) domains, are characterized by a series of exotic units found now south of the main Taurus range and compose the South-Taurides Exotic Units. The Mersin mélanges are subdivided in a Triassic and a Late Cretaceous unit. These units consist of the remnants of three major Tethyan oceans, the Palaeotethys, the Neotethys and the Huglu-Pindos. The definition and inventory of the Upper Antalya Nappes (Turkey) are still a matter of controversies and often conflicting interpretations. The recognition of Campanian radiolarians on top of the Kerner Gorge unit directly overlain by the Ordovician Seydi§ehir Fm. of the Tahtah Dag Nappe outlines a tectonic contact and demonstrates that the Upper Antalya Nappes system is composed of three different nappes, the Kerner Gorge, Bakirli and the Tahtah Dag nappes. Additionally, a limestone block in a doubtful tectonic position at the base of the Upper Antalya Nappes yielded for the first time two middle Viséan associations of foraminifers and problematic algae. The Tavas Nappe in the Lycian Nappes (Turkey) is classically divided into the Karadag, Teke Dere, Köycegiz and Haticeana units. As for the Mersin mélanges, the Tavas Nappe is highly composite and includes dismembered units belonging to the Palaeotethyan, Neotethyan and HugluPindos realms. The Karadag unit consists of a Gondwana-type platform succession ranging from the Late Devonian to the Late Triassic. It belongs to the Cimmerian Taurus terrane and was part of the northern passive margin of the Neotethys. The Teke Dere unit is composed of different parts of the Palaeotethyan succession including Late Carboniferous OIB-type basalts, Carboniferous MORB-type basalts, an Early Carboniferous siliciclastic series and a Middle Permian arc sequence. The microfauna and microflora identified in different horizons within the Teke Dere unit share strong biogeographical affinities with the northern Palaeotethyan borders. Kubergandian limestones in primary contact above the Early Carboniferous siliciclastics yielded a rich and diverse microfauna and microflora also identified in reworked cobbles within the Late Triassic Gevne Fm. of the Aladag unit (Turkey). The sedimentological evolution of the Köycegiz and Haticeana series is in many points similar to classical Pindos sequences. These series originated in the Huglu-Pindos Ocean along the northern passive margin of the Anatolian (Turkish transect) and Sitia-Pindos (Greek transect) terranes. Conglomerates at the base of the Lentas Unit in southern Crete (Greece) yielded a microfauna and microflora presenting also strong affinities with the northern borders of the Palaeotethys. This type of reworked sediments at the base of Pindos-like series would suggest a derivation from the Palaeotethyan active margin. -Résumé (French abstract) L'étude des marges continentales fossiles de l'espace téthysien implique d'étudier les domaines océaniques qui y étaient rattachés. Les progrès de la tectonique des plaques ont confirmé l'importance de la reconnaissance des mélanges d'accrétion. Les mélanges ophiolitiques dérivent d'une plaque supérieure ophiolitique qui obducte, et d'une plaque inférieure océanique. En plus d'éléments ophiolitiques, les mélanges peuvent aussi incorporer des parties d'un arc magmatique, ou des fragments d'une marge continentale passive. Comme la plaque inférieure disparaît généralement complètement durant le processus d'obduction, elle ne peut être reconstruite qu'au travers de ses éléments trouvés dans les mélanges. A cause de leur situation aux limites de marges actives, les mélanges d'accrétion bien préservés permettent de contraindre l'évolution géologique d'anciens océans et de leurs marges. L'identification de vestiges de la Paléotéthys en série d'accrétion ou remaniés lors de l'orogenèse éo-cimmérienne au Trias supérieur, ainsi que l'observation de séquences marginales de Huglu-Pinde en Turquie du sud et dans les Hellénides externes représentent les principaux résultats de ce travail, permettant d'établir de nouvelles corrélations paléogéographiques. Les mélanges de Mersin (Turquie), avec les domaines d'Antalya et de Mamonia (Chypre), sont caractérisés par des unités exotiques se trouvant au sud de la chaîne taurique, et forment les Unités Exotiques Sud-Tauriques. Les mélanges de Mersin sont subdivisés en une unité triasique, et une autre du Crétacé supérieur. Ces unités comprennent les reliques de trois principaux océans téthysiens, la Paléotéthys, la Néotéthys et Huglu-Pinde. L'inventaire et la définition des nappes supérieures d'Antalya (Turquie) sont encore matière à controverse et donne lieu à des interprétations conflictuelles. La découverte de radiolaires campaniens au sommet de l'unité de la Gorge de Kemer, directement recouverts par la formation ordovicienne de Seydisehir de la nappe du Tahtali Dag met en évidence un contact tectonique et démontre que les nappes supérieures sont composées de trois différentes nappes, celle de la Gorge de Kemer, celle du Bakirli et celle Tahtali Dag. De plus, un bloc de calcaire dont la position tectonique demeure incertaine à la base des nappes supérieures a fourni pour la première fois deux associations viséennes de foraminifères et d'algues problématiques. La nappe de Tavas dans les nappes lyciennes (Turquie) est séparée en unités du Karadag, du Teke Dere, de Köycegiz et d'Haticeana. Comme pour les mélanges de Mersin, la nappe de Tavas est composite et inclut des unités appartenant à la Paléotéthys, à la Néotéthys et à Huglu-Pinde. L'unité du Karadag est une plateforme carbonatée de type Gondwana se développant du Dévonien supérieur au Trias supérieur. Elle appartient au domaine cimmérien du Taurus et formait la marge nord de la Néotéthys. L'unité du Teke Dere est composée de différentes écailles paléotéthysiennes et inclut des basaltes d'île océanique du Carbonifère supérieur, des basaltes de ride océanique du Carbonifère, une série siliciclastique du Carbonifère supérieur et un arc du Permien moyen. Les microfaunes et -flores trouvées à différents niveaux de la série du Teke Dere partagent de fortes affinités paléogéographiques avec les marges nord de la Paléotéthys. Des calcaires du Kubergandien en contact primaire au-dessus de la série siliciclastique a donné de riches microfaunes et -flores, également identifiées dans des galets remaniés dans la formation de Gevne du Trias supérieur de l'Aladag. L'évolution sédimentologique des séries de Köycegiz et d'Haticeana sont très similaires aux séries classiques du Pinde. Ces séquences prennent leur racine dans l'océan de Huglu-Pinde, le long de la marge passive nord anatolienne (profil turc) et de la marge de Sitia-Pinde (profil grec). Des conglomérats à la base de l'unité de Lentas au sud de la Crète (Grèce) ont donné des microfaunes et flores partageant également de fortes similitudes avec les bordures nord de la Paléotéthys. Le type de sédiments remaniés à la base d'unités de type Pinde suggère une dérivation depuis la marge active de la Paléotéthys. -Résumé grand public (non-specialized abstract) Au début du 20ème siècle, Alfred Wegener bouleverse les croyances géologiques de l'époque et publie plusieurs articles sur la dérive ou la translation des continents. En utilisant des arguments géographiques (similarités des lignes de côte), paléontologiques (faunes et flores similaires) et climatiques (dépôts tropicaux et glaciaires), Wegener explique qu'il y a plusieurs millions d'années, les terres émergées actuelles ne devaient former qu'un seul et grand continent. La fin du 20ème siècle verra l'avènement de la théorie de la tectonique des plaques suite à la reconnaissance du cycle de Wilson, des rides médio-océaniques, des anomalies magnétiques dans les océans et des sutures océaniques qui représentent les reliques d'océans disparus. Le Cycle de Wilson se caractérise par une suite d'évènements géologiques majeurs pouvant se résumer de la manière suivante : (1) séparation d'un craton continental en deux parties, créant une limite de plaque divergente. C'est ce que l'on appelle un rift; (2) développement et croissance d'un océan entre ces deux blocs. Des roches magmatiques remontent à la surface de la terre et forment une chaîne de montagne sous-marine que l'on appelle ride médio-océanique ou dorsale. L'océan continue de se développer, et des sédiments se déposent à sa surface formant la suite ophiolitique ou trinité de Steinmann; (3) après une phase d'expansion plus ou moins longue, les conditions imposées aux limites des plaques à la surface de la terre changent, et l'océan se met à se refermer par disparition progressive (subduction) de sa croûte océanique sous une croûte continentale par exemple. Ceci crée une nouvelle limite de plaque, convergente cette fois; (4) la subduction de la plaque océanique sous la plaque continentale provoque une remontée de magma formant des chaînes volcaniques à la surface de la Terre ; (5) une fois que la plaque océanique a complètement disparu, les deux blocs préalablement séparés par l'océan font collision, formant ainsi une chaîne de montagne. Les chaînes de montagnes sont de manière générale formées par un empilement plus ou moins complexe de nappes. C'est au coeur de certaines de ces nappes que se trouvent les vestiges de l'océan disparu. Un des objectifs de ce travail était la recherche de ces vestiges dans le domaine téthysien de la Méditerranée orientale. Pour ce faire, nous avons parcourus une grande partie du sud de la Turquie, nous sommes allés à Chypre, dans le Sultanat d'Oman, en Iran, en Crète, et nous avons visités quelques îles grecques du Dodécanèse. La région de la Méditerranée orientale est une zone qui a été tectoniquement très active, et qui continue de l'être de nos jours par des phénomènes de subduction (ex. les volcans de Santorin), et par des mouvements coulissants entre des plaques continentales (ex. la faille nord-anatolienne) qui donnent régulièrement lieu à des tremblements de terre. Pour le géologue, la complexité de ces zones d'étude réside dans le fait que les chaînes de montagne actuelles ne contiennent en général pas seulement les restes d'un océan, mais bien de plusieurs bassins océaniques qui se sont succédés dans l'espace et dans le temps. Les nappes qui se trouvent au sud de la Turquie et dans le Dodécanèse forment un important jalon dans la chaîne alpine qui s'étend depuis les Alpes jusque dans l'Himalaya. L'idée d'un continuum au coeur de ce système se basait principalement sur l'âge des océans et sur la reconnaissance de similarités dans l'évolution des séries sédimentaires. La localisation des vestiges de la Paléotéthys ainsi que l'identification des séries sédimentaires ayant appartenu à l'océan de HugluPinde repris sous forme de nappes en Turquie et en Grèce sont cruciales pour permettre de bonnes corrélations locales et régionales. La reconnaissance, la compréhension et l'interprétation de ces séries sédimentaires permettront d'élaborer un modèle d'évolution géodynamique régional, s'appuyant sur des faits de terrains indiscutables, et prenant en compte les contraintes globales que ce genre d'exercice implique.

The International LAM Registry: a component of an innovative web-based clinician, researcher, and patient-driven rare disease research platform.

BACKGROUND: A relative inability to capture a sufficiently large patient population in any one geographic location has traditionally limited research into rare diseases. METHODS AND RESULTS: Clinicians interested in the rare disease lymphangioleiomyomatosis (LAM) have worked with the LAM Treatment Alliance, the MIT Media Lab, and Clozure Associates to cooperate in the design of a state-of-the-art data coordination platform that can be used for clinical trials and other research focused on the global LAM patient population. This platform is a component of a set of web-based resources, including a patient self-report data portal, aimed at accelerating research in rare diseases in a rigorous fashion. CONCLUSIONS: Collaboration between clinicians, researchers, advocacy groups, and patients can create essential community resource infrastructure to accelerate rare disease research. The International LAM Registry is an example of such an effort. 82.

A unique Permian-Triassic boundary section from the Neotethyan Hawasina Basin, Central Oman Mountains

In the Wadi Wasit area (Central Oman Mountains), Dienerian breccias are widespread. These breccias consist mostly of Guadalupian reefal blocks, often dolomitised, and some rare small-sized blocks of lowermost Triassic bivalve-bearing limestones. A unique block, with a size of about 200 m(3), including Permian and earliest Triassic faunas has been studied in detail. The so-called Wadi Wasit block consists of three major lithological units. A basal unstratified grey limestone is rich in various reef-building organisms (rugose corals, calcareous sponges, stromatoporoids) and has been dated as Middle Permian. It is disconformably overlain by well- and thin-bedded light grey to yellowish coloured limestones rich in molluscs. Two major lithologies (Coquina Limestone respectively Bioclastic Limestone unit) characterise the shelly limestones, their contact seems gradual. These two units are well-dated; they are of Griesbachian age and contain three conodont zones, the Parvus Zone, the Staeschei Zone and the Sosioensis Zone, and two ammonoid zones, the Ophiceras tibeticum Zone and an 'unnamed interval'. The third unit consists of a grey marly limestone containing Neospathodus kummeli (basal Dienerian). It is the first record of well-dated basal Triassic sediments in the Arabian Peninsula. The Coquina Limestone is dominated by the bivalve Promyalina with some Claraia and Eumorphotis. This bivalve association is interpreted as a pioneering opportunistic assemblage. Towards the top of the Bioclastic Limestone unit, the faunal diversity increases and contains probably more than 20 taxa of bivalves, microgastropods, crinoids, brachiopods, ammonoids, echinoid spines, ostracods and conodonts. The generic diversity of this biofacies exceeds by far any other Griesbachian assemblage known. Our data give new evidence for the geodynamical history for the distal carbonate shelf bordering the Hawasina Basin. A break in the sedimentation characterises the Late Permian. The basal Triassic shows a steady transgression and the breccias may record a distinct gravitational collapse of platform margins linked with sea-level low stand at the end of Induan time (late Dienerian-basal Smithian). delta(13)C(carb) isotopic analyses were performed and yield typical Permian values of around 4parts per thousand for the Reefal Limestone, with a strong negative shift across the Permian-Triassic boundary. During the Griesbachian values shift positively from 0.5 to 3.1parts per thousand parallel to an increase in faunal diversity and probably primary productivity. The detailed faunal analysis and the discovery of an unexpected diversity give,us a new understanding of the recovery of the Early Triassic marine ecosystem.

SIMSAFADIM-CLASTIC: A new approach to mathematical 3D forward simulation modelling for terrigenous and carbonate marine sedimentation

Most sedimentary modelling programs developed in recent years focus on either terrigenous or carbonate marine sedimentation. Nevertheless, only a few programs have attempted to consider mixed terrigenous-carbonate sedimentation, and most of these are two-dimensional, which is a major restriction since geological processes take place in 3D. This paper presents the basic concepts of a new 3D mathematical forward simulation model for clastic sediments, which was developed from SIMSAFADIM, a previous 3D carbonate sedimentation model. The new extended model, SIMSAFADIM-CLASTIC, simulates processes of autochthonous marine carbonate production and accumulation, together with clastic transport and sedimentation in three dimensions of both carbonate and terrigenous sediments. Other models and modelling strategies may also provide realistic and efficient tools for prediction of stratigraphic architecture and facies distribution of sedimentary deposits. However, SIMSAFADIM-CLASTIC becomes an innovative model that attempts to simulate different sediment types using a process-based approach, therefore being a useful tool for 3D prediction of stratigraphic architecture and facies distribution in sedimentary basins. This model is applied to the neogene Vallès-Penedès half-graben (western Mediterranean, NE Spain) to show the capacity of the program when applied to a realistic geologic situation involving interactions between terrigenous clastics and carbonate sediments.

Seasonal changes in platform use by adult farmbred silver foxes (Vulpes vulpes)

Selostus: Aikuisten hopeakettujen hyllynkäytön vuodenaikaisvaihtelut

Automated DNA extraction using the QIAsymphony platform: Estimation of DNA recovery from simulated forensic stains

The aim of this study was to evaluate the forensic protocol recently developed by Qiagen for the QIAsymphony automated DNA extraction platform. Samples containing low amounts of DNA were specifically considered, since they represent the majority of samples processed in our laboratory. The analysis of simulated blood and saliva traces showed that the highest DNA yields were obtained with the maximal elution volume available for the forensic protocol, that is 200 ml. Resulting DNA extracts were too diluted for successful DNA profiling and required a concentration. This additional step is time consuming and potentially increases inversion and contamination risks. The 200 ml DNA extracts were concentrated to 25 ml, and the DNA recovery estimated with real-time PCR as well as with the percentage of SGM Plus alleles detected. Results using our manual protocol, based on the QIAamp DNA mini kit, and the automated protocol were comparable. Further tests will be conducted to determine more precisely DNA recovery, contamination risk and PCR inhibitors removal, once a definitive procedure, allowing the concentration of DNA extracts from low yield samples, will be available for the QIAsymphony.