Evolution of factors affecting mechanical olive harvesting

Harvest efficiency is defined as the percentage of fruits harvested by total production. The percentage of fruits harvested is less than 100% when working with trunk shakers to detach olives. It is important to increase the percentage of fruits harvested in order to increase farmer’s income. This objective can be achieved knowing the evolution of the main factors affecting fruit detachment. Fruit removal force (FRF), fruit weight (P) and the ratio between them are important for harvest efficiency. Field trials took place for two years (2013-2014) in Vilariça Valley, northeast Portugal in an olive orchard with ‘Cobrançosa Transmontana’ cultivar. It was adopted a mechanical harvesting system based on a trunk shaker to detach fruits, and an inverted umbrella to collect fruits. Elementary operation times were measured in seconds to evaluate work rates. FRF and P were measured in the ripening period, to evaluate their evolution. In this paper are presented the preliminary results of the ratio FRF (fruit removal force)/fruit weight evolution during the ripening period (P) and the results of the equipment work rate (trees h-1). The ratio FRF/P has predominantly descendant values in the weeks before harvest, from 140 to 80 as a result of a FRF downward variation from 4.9 to 2.94 N and an upward variation of P from 0.0294 to 0.0637 N. The FRF/P ratio stabilizes the decline in the last week of November just before harvesting, registering in some cases a slight increase in consequence of FRF increase higher than P increase (contrary to the tendency of previous weeks). Equipment work rate showed values between 40 and 57 trees h-1, confirming previous results.

ECONOMIC ANALYSIS of AMAZON RIVER PRAWN FARMING TO THE MARKETS FOR LIVE BAIT and JUVENILES IN PANTANAL, BRAZIL

The implementation of a hypothetical aquaculture facility with hatchery, nursery and grow-out earthen ponds for raising the Amazon River Prawn Macrobrachium amazonicum in the Pantanal was considered. Eight larviculture cycles per year were projected: four to produce post-larvae for stocking in grow-out bait ponds, and four to stock nursery tanks to sell juveniles as seed to grow-out farms, which produce prawns for human consumption. Annual production would be 146,880 dozen bait prawns and 2,938 thousand juveniles. The assumed sale prices were US$ 1.38 per dozen baits and US$ 15.39 per thousand juveniles. The net present value was US$ 555,890.79, internal rate of return was 48% per year, payback period was 2.4 years and benefit-cost ratio was 3.90. The breakeven price to cover total costs per dozen baits was US$ 0.70 and per thousand juveniles was US$ 17.00, indicating that the selling price assumed for juveniles in base scenario is not realistic. Net return was US$ 84,773.80. The results indicate that this activity would be a lucrative and attractive investment in the Pantanal.

Population structure of pond-raised Macrobrachium amazonicum with different stocking and harvesting strategies

The effect of size-grading of juveniles prior to stocking, as well as selective harvesting, on the population structure of pond-raised Macrobrachium amazonicum was studied. A randomized-complete-blocks design with 4 treatments and 3 replicates was used. The treatments were: upper size-graded juveniles, lower size-graded juveniles, ungraded juveniles (traditional), and ungraded juveniles with selective harvesting. Twelve 0.01 ha earthen ponds were stocked at 40 juveniles m(-2), according to the relevant treatment. Every three weeks, random samples from each pond were obtained for biometry, and after 3.5 months, the ponds were drained and completely harvested. Animals were then counted, weighed, and sexed; males were sorted as Translucent Claw (TC), Cinnamon Claw (CC), Green Claw 1 (GC1), and Green Claw 2 (GC2), and females as Virgin (VF), Berried (BE), and Open (OF). The prawns developed rapidly in the ponds. attaining maturity and differentiating into male morphotypes after about 2 months in all treatments. The fast-growing juveniles (upper grading fraction) mostly did not constitute the dominant males (CC] and GC2) in the adult population. Population development was slower in ponds stocked with Lower prawns, whereas selective harvesting increased the frequency of GC1 and reduced the final mean weight of GC2 males. The proportion of males increased throughout the culture period, but was generally not affected by the stocking or harvesting strategies. Grading juveniles and selective harvesting slightly altered the population dynamics and structure, although the general population development showed similar patterns in ponds stocked with upper, lower, and ungraded juveniles, or selectively harvested. (C) 2010 Elsevier B.V. All rights reserved.

Long-term assessment of wild boar harvesting and cattle removal for bovine tuberculosis control in free ranging populations

Wild boar is a recognized reservoir of bovine tuberculosis (TB) in the Mediterranean ecosystems, but information is scarce outside of hotspots in southern Spain. We describe the first high-prevalence focus of TB in a non-managed wild boar population in northern Spain and the result of eight years of TB management. Measures implemented for disease control included the control of the local wild boar population through culling and stamping out of a sympatric infected cattle herd. Post-mortem inspection for detection of tuberculosis-like lesions as well as cultures from selected head and cervical lymph nodes was done in 745 wild boar, 355 Iberian ibexes and five cattle between 2004 and 2012. The seasonal prevalence of TB reached 70% amongst adult wild boar and ten different spoligotypes and 13 MIRU-VNTR profiles were detected, although more than half of the isolates were included in the same clonal complex. Only 11% of infected boars had generalized lesions. None of the ibexes were affected, supporting their irrelevance in the epidemiology of TB. An infected cattle herd grazed the zone where 168 of the 197 infected boars were harvested. Cattle removal and wild boar culling together contributed to a decrease in TB prevalence. The need for holistic, sustained over time, intensive and adapted TB control strategies taking into account the multi-host nature of the disease is highlighted. The potential risk for tuberculosis emergence in wildlife scenarios where the risk is assumed to be low should be addressed.

Energy harvesting from hydroelectric systems for remote sensors

Hydroelectric systems are well-known for large scale power generation. However, there are virtually no studies on energy harvesting with these systems to produce tens or hundreds of milliwatts. The goal of this work was to study which design parameters from large-scale systems can be applied to small-scale systems. Two types of hydro turbines were evaluated. The first one was a Pelton turbine which is suitable for high heads and low flow rates. The second one was a propeller turbine used for low heads and high flow rates. Several turbine geometries and nozzle diameters were tested for the Pelton system. For the propeller, a three-bladed turbine was tested for different heads and draft tubes. The mechanical power provided by these turbines was measured to evaluate the range of efficiencies of these systems. A small three-phase generator was developed for coupling with the turbines in order to evaluate the generated electric power. Selected turbines were used to test battery charging with hydroelectric systems and a comparison between several efficiencies of the systems was made. Keywords

Integrated CoPtP permanent magnets for MEMS electromagnetic energy harvesting applications

This work reports the development of integrated Co rich CoPtP hard magnetic material for MEMS applications such as Electromagnetic Vibration Energy Harvesting. We report a new method of electrodeposition compared to the conventional DC plating, involving a combination of forward and reverse pulses for optimized deposition of Co rich CoPtP hard magnetic material. This results in significant improvements in the microstructure of the developed films as the pulse reverse plated films are smooth, stress free and uniform. Such improvements in the structural properties are reflected in the hard magnetic properties of the material as well. The intrinsic coercivities of the pulse reverse deposited film are more than 6 times higher for both in-plane and out-of-plane measurement directions and the squareness of the hysteresis loops also improve due to the similar reasons.

Energy harvesting for monitoring bridges over their operational life

The use of energy harvesting materials for large infrastructure is a promising and growing field. In this regard, the use of such harvesters for the purpose of structural health monitoring of bridges has been proposed in recent times as one of the feasible options since the deployment of them can remove the necessity of an external power source. This paper addresses the performance issue of such monitors over the life-cycle of a bridge as it deteriorates and the live load on the structure increases. In this regard, a Lead Zirconate Titanate (PZT) material is considered as the energy harvesting material and a comparison is carried out over the operational life of a reinforced concrete bridge. The evolution of annual average daily traffic (AADT) is taken into consideration, as is the degradation of the structure over time, due to the effects of corrosion. Evolution of such harvested energy is estimated over the life-cycle of the bridge and the sensitivity of harvested energy is investigated for varying rates of degradation and changes in AADT. The study allows for designing and understanding the potential of energy harvesters as a health monitor for bridges. This paper also illustrates how the natural growth of traffic on a bridge over time can accentuate the identification of damage, which is desirable for an ageing structure. The paper also assesses the impact and effects of deployment of harvesters in a bridge as a part of its design process, considering performance over the entire life-cycle versus a deployment at a certain age of the structure.

Capacity building activities in rain water harvesting: South Kyrgyzstan

Water and food are fundamental human rights. However, a number of communities in the world suffer due to a lack of these most basic needs. With few alternative economic opportunities, communities in rural and mountainous Kyrgyzstan have to rely mainly on agriculture for their livelihoods.

Summary of Wholesale and Bait Dealer Laws 2016-2017

Each year the South Carolina Department of Natural Resources publishes a summary of the laws and regulations of commercial fishing in the state. This publication provides the license requirements, definitions, restrictions, and laws and regulations for wholesale and bait dealers.

Effects of hook and bait on targeted and bycatch fishes in an equatorial atlantic pelagic longline fishery

We examined the effects of different hook style and bait type combinations on the catches of targeted, bycatch, and discarded fishes in equatorial Atlantic waters. In total, 221 longline sets (>305,000 hooks) were deployed from Portuguese pelagic longline vessels (SELECT -PAL Project) during the February–October fishing season. Three different hook styles and two bait types were tested: the traditional J-hook was compared to two circle hooks (one non-offset and one with 10° offset), and squid bait was compared to mackerel. Catch per unit effort (CPU Es) were calculated and compared between the different hook style and bait type combinations, which indicated that the effects of hook style and bait on the CPU Es were species-specific. For example, swordfish CPU Es were higher with J-hooks baited with squid, while for targeted tunas and blue shark only the bait effect was significant, but with opposite effect (i.e., higher catches of tuna with squid bait and higher catches of blue shark with mackerel bait). For the discarded species, at-haulback mortality was also species-specific. Proportions of alive vs dead specimens at time of fishing gear retrieval did not vary significantly by hook style or bait type combinations. The total retained catch was analyzed in value per unit effort (VPU E), and indicated losses in fishery revenue when mackerel was used instead of squid, but not when circle hooks were used instead of J-hooks.

Energy harvesting from hydroelectric systems for remote sensors

Hydroelectric systems are well-known for large scale power generation. However, there are virtually no studies on energy harvesting with these systems to produce tens or hundreds of milliwatts. The goal of this work was to study which design parameters from large-scale systems can be applied to small-scale systems. Two types of hydro turbines were evaluated. The first one was a Pelton turbine which is suitable for high heads and low flow rates. The second one was a propeller turbine used for low heads and high flow rates. Several turbine geometries and nozzle diameters were tested for the Pelton system. For the propeller, a three-bladed turbine was tested for different heads and draft tubes. The mechanical power provided by these turbines was measured to evaluate the range of efficiencies of these systems. A small three-phase generator was developed for coupling with the turbines in order to evaluate the generated electric power. Selected turbines were used to test battery charging with hydroelectric systems and a comparison between several efficiencies of the systems was made. Keywords

Enzymatic activity on sediments and nematode assemblage responses during seagrass beds habitat recovery following the disturbance of the traditional digging activity of bivalves harvesting.

Sediment digging is an anthropogenic activity connected to the exploitation of living resources in estuarine and marine environments. The knowledge on the functional responses of the benthic assemblages to the physical disturbance is an important baseline to understand the ecological processes of the habitat recovery and restoration and to develop tools for the management of the harvesting activities. To investigate the effects of the digging activity of the bivalves on Zostera noltii seagrass beds a manipulative field experiment was conducted that included the enzymatic activity of sediments and the associated nematode assemblages. Four plots (two undisturbed serving as control and two dug to collect bivalves - treatment) with 18 subplots were randomly located at seagrass beds in the Mira estuary at the SW coast of Portugal. Samples were randomly and unrepeatably collected from three subplots of each plot in five different occasions, before sediment digging (T0) up to six months after disturbance (T5). Microbial activity in sediments was assess by determining the extracelular enzymatic activity of six hydrolytic enzymes (sulfatase, phosphatase, b -N-acetilglucosaminidase, b-glucosidase, urease, protease) and two oxidoreductases (phenol oxidase and peroxidase). The microbial community status was also assessed through the measurement of dehydrogenase, which reflects microbial respiration. The nematode assemblages composition, biodiversity and trophic composition at different sampling occasions were also analyzed. The fluorometric and biochemical parameters analysed of the Z. noltii plants during the experimental period showed a recovery of the seagrass beds, and it was detected an increase of the enzymatic activity of the sediments after disturbance. The nematodes assemblages were similar in all sampling occasions. The seagrass beds and the nematodes assemblages associated showed a high resilience to the stress caused by the traditional bivalves digging activity. The obtained results allow the development of a management programme for the commercial fishing activity to maintain the good environmental status and minimized the secondary environmental effects on marine and estuarine habitats through the establishment of a baseline for the regulation of the harvesting frequency.

Assessment of sugarcane harvesting residue effects on soil spectral behavior

When the harvesting of sugarcane involves a mechanized process, plant residues remain on the soil surface, which makes proximal and remote sensing difficult to monitor. This study aimed to evaluate, under laboratory conditions, differences in the soil spectral behavior of surface layers Quartzipsamment and Hapludox soil classes due to increasing levels of sugarcane?s dry (DL) and green (GL) leaf cover on the soil. Soil cover was quantified by supervised classification of the digital images (photography) taken of the treatments. The spectral reflectance of the samples was obtained using the FieldSpec Pro (350 to 2500 nm). TM-Landsat bands were simulated and the Normalized Difference Vegetation Index (NDVI) and soil line were also determined. Soil cover ranged from 0 to 89 % for DL and 0 to 80 % for GL. Dry leaf covering affected the features of the following soil constituents: iron oxides (480, 530 and 900 nm) and kaolinite (2200 nm). Water absorption (1400 and 1900 nm) and chlorophyll (670 nm) were determinant in differentiating between bare soil and GL covering. Bands 3 and 4 and NDVI showed pronounced variations as regards differences in soil cover percentage for both DL and GL. The soil line allowed for discrimination of the bare soil from the covered soil (DL and GL). High resolution sensors from about 50 % of the DL or GL covering are expected to reveal differences in soil spectral behavior. Above this coverage percentage, soil assessment by remote sensing is impaired.

Nanostructured piezoelectric materials for the design and development of self-sensing composite materials and energy harvesting devices

The work activities reported in this PhD thesis regard the functionalization of composite materials and the realization of energy harvesting devices by using nanostructured piezoelectric materials, which can be integrated in the composite without affecting its mechanical properties. The self-sensing composite materials were fabricated by interleaving between the plies of the laminate the piezoelectric elements. The problem of negatively impacting on the mechanical properties of the hosting structure was addressed by shaping the piezoelectric materials in appropriate ways. In the case of polymeric piezoelectric materials, the electrospinning technique allowed to produce highly-porous nanofibrous membranes which can be immerged in the hosting matrix without inducing delamination risk. The flexibility of the polymers was exploited also for the production of flexible tactile sensors. The sensing performances of the specimens were evaluated also in terms of lifetime with fatigue tests. In the case of ceramic piezo-materials, the production and the interleaving of nanometric piezoelectric powder limitedly affected the impact resistance of the laminate, which showed enhanced sensing properties. In addition to this, a model was proposed to predict the piezoelectric response of the self-sensing composite materials as function of the amount of the piezo-phase within the laminate and to adapt its sensing functionalities also for quasi-static loads. Indeed, one final application of the work was to integrate the piezoelectric nanofibers in the sole of a prosthetic foot in order to detect the walking cycle, which has a period in the order of 1 second. In the end, the energy harvesting capabilities of the piezoelectric materials were investigated, with the aim to design wearable devices able to collect energy from the environment and from the body movements. The research activities focused both on the power transfer capability to an external load and the charging of an energy storage unit, like, e.g., a supercapacitor.

RF energy harvesting solutions for electromagnetic harsh environments: from industrial plants to wearable/implantable devices

The presented Thesis describes the design of RF-energy harvesting systems with applications on different environments, from the biomedical side to the industrial one, tackling the common thread problem which is the design of complete energy autonomous tags each of them with its dedicated purpose. This Thesis gathers a work of three years in the field of energy harvesting system design, a combination of full-wave electromagnetic designs to optimize not only the antenna performance but also to fulfill the requirements given by each case study such as dimensions, insensitivity from the surrounding environment, flexibility and compliance with regulations. The research activity has been based on the development of highly-demanded ideas and real-case necessities which are in line with the environment in which modern IoT applications can really make a positive contribution. The Thesis is organized as follows: the first application, described in Chapter 2, regards the design and experimental validations of a rotation-insensitive WPT system for implantable devices. Chapter 3 presents the design of a wearable energy autonomous detector to identify the presence of ethanol on the body surface. Chapter 4 describes investigations in the use of Bessel Beam launchers for creating a highly-focused energy harvesting link for wearable applications. Reduced dimensions, high focusing and decoupling from the human body are the key points to be addressed during the full-wave design and nonlinear optimization of the receiver antenna. Finally, Chapter 5 presents an energy autonomous system exploiting LoRa (Long Range) nodes for tracking trailers in industrial plants. The novelty behind this design lies on the aim of obtaining a perfectly scalable system that exploits not only EH basic operating system but embeds a seamless solution for collecting a certain amount of power that varies with respect the received power level on the antenna, without the need of additional off-the-shelf components.