Composition of pecan cultivars Wichita and Western Schley [Carya illinoinensis (Wangenh.) K. Koh] grown in Australia

Pecans from the cultivars Wichita and Western Schley [Carya illinoinensis (Wangenh.) K. Koch] collected over three years were analyzed for the following constituents: total lipid content; fatty acid profiles; sucrose content; protein; total dietary fiber; the minerals magnesium, calcium, potassium, sulfur, phosphorus, boron, copper, iron, manganese, sodium, zinc, and aluminum; vitamin C; and lipase; and lipoxygenase activities. Year of harvest and cultivar had little effect on the composition of the pecans. Overall, protein content was the only constituent that differed between pecans grown in Australia and those grown in the United States. This difference is probably related to differences in growing location and horticultural practices between the two countries.

Identification of micronutrient deficiency of wheat in the Peshawar Valley, Pakistan

A field experiment was conducted to study the effect of micronutrients, zinc (Zn), copper (Cu), iron (Fe), manganese (Mn), boron (13) and a commercial fritted micronutrient product called Zarzameen, on the yield and the yield components of wheat (Triticum aestivum L.), in the Peshawar valley, Pakistan. Different combinations of Zn, Cu. Fe. Mn, B, and Zarzameen were applied at the rate of 4.0, 2.0, 5.0, 2.0, 1.0 kg ha(-1) and 1.0 kg ha(-1), respectively, along with a basal dose of 100 kg ha(-1) nitrogen(N), 75 kg ha(-1) phosphorus (P) and 50 kg ha(-1) potassium (K). The fertilizer treatments (macro- and micronutrients) increased wheat dry matter, grain yield, and straw yield significantly over an unfertilized control. Soil tests for B and Zn were increased both at boot and harvesting stage, and Fe at boot stage, with the addition of micronutrients. Plants without B had showed classical B deficiency symptoms at grain formation stage, but not at vegetative stage. Boron concentration in the dry matter of wheat plants increased with the addition of the B fertilizer in the soil. Boron deficiency was not observed in plants containing >4 mg B kg(-1) at the boot stage, or in soils containing > 1.4 mg kg(-1) hot water soluble B.

Rootstocks influence 'Hass' avocado fruit quality and fruit minerals

To determine the potential for rootstocks to improve avocado quality, 'Hass' fruit from trees on seedling 'Velvick' (SV), clonal 'Velvick' (CV) or clonal 'Duke 7' (CD) rootstocks were harvested in 1999 and 2000, ripened at 20 C immediately after harvest (non-stored) or stored at 5 C for four weeks (stored), and then fruit quality and mineral concentrations determined. In 2000, non-stored CV fruit had lower severity of body rots (5% of flesh volume affected, caused mainly by Colletotrichum gloeosporioides) than CD fruit (20%), while body rots severity in stored CV fruit was 20% compared with 38% in stored CD fruit. Stored CV fruit had less severe diffuse discoloration (3% and 9% in 1999 and 2000, respectively) than CD fruit (7% and 20%, respectively). Stored CV fruit also had less severe vascular browning (19%) than CD fruit (33%) in 2000. In both seasons, CV fruit had 15-19% higher flesh calcium concentrations, 17-22% higher flesh boron concentrations, and 14-15% lower flesh nitrogen concentrations than CD fruit. In 2000, CV fruit also had 27% more skin calcium and 14% less skin nitrogen than CD fruit. There were no effects of rootstock on yield, canopy volume, measured length of non-suberized roots, average fruit weight, fruit length: width ratio, skin thickness, dry matter, proportion of the fruit skin purple-black when ripe, or seed mass: fruit weight ratio. These results suggest that there is potential to improve 'Hass' avocado quality through rootstock selection, and that tree and fruit mineral concentrations have a role in this relationship.

Compositional changes of Australia-grown Western Schley pecans [Carya illinoinensis (Wangenh.) K. Koch] during maturation

Changes in composition during the maturation of Western Schley pecans [Carya illinoinensis (Wangenh.) K. Koch] grown in Australia were investigated. Pecans of different maturity levels were collected at monthly intervals between March and June in. 1999 and 2000 and analyzed for the concentrations of moisture, total lipid, sucrose, raffinose, protein, and the minerals aluminum, boron, calcium, copper, iron, potassium, magnesium, manganese, sodium, phosphorus, sulfur, and zinc. Moisture, total lipid, and calcium contents changed significantly (p < 0.05) with harvest time and maturity, whereas the other components did not. Western Schley pecans grown in Australia should be harvested after the shuck has opened and it is either green or brown in color to maximize total lipid content and quality. This occurred after May 11 in 1999 and after May 17 in 2000.

Nanocrystalline p-layer for a-Si:H p-i-n solar cells and photodiodes

We report on structural, electronic, and optical properties of boron-doped, hydrogenated nanocrystalline silicon (nc-Si:H) thin films deposited by plasma-enhanced chemical vapor deposition (PECVD) at a substrate temperature of 150 degrees C. Film properties were studied as a function of trimethylboron-to-silane ratio and film thickness. The absorption loss of 25% at a wavelength of 400 nm was measured for the 20 nm thick films on glass and glass/ZnO:Al substrates. By employing the p(+) nc-Si:H as a window layer, complete p-i-n structures were fabricated and characterized. Low leakage current and enhanced sensitivity in the UV/blue range were achieved by incorporating an a-SiC:H buffer between the p- and i-layers.

Laser-assisted deposition of thin films from photoexcited vapour phases

Laser-assisted chemical vapour deposition (LCVD) has been extensively studied in the last two decades. A vast range of applications encompass various areas such as microelectronics, micromechanics, microelectromechanics and integrated optics, and a variety of metals, semiconductors and insulators have been grown by LCVD. In this article, we review briefly the LCVD process and present two case studies of thin film deposition related to laser thermal excitation (e.g., boron carbide) and non-thermal excitation (e.g., CrO(2)) of the gas phase.

Coordination Chemistry of the (eta(6)-p-Cymene)ruthenium(II) Fragment with Bis-, Tris-, andTetrakis(pyrazol-1-yl)borate Ligands: Synthesis, Structural, Electrochemical, and CatalyticDiastereoselective Nitroaldol Reaction Studies

Novel [Ru(eta(6)-p-cymene)(kappa(2)-L)X] and [Ru(eta(6)-p-cymene)(kappa(3)-L)]X center dot nH(2)O complexes (L = bis-, tris-, or tetrakis-pyrazolylborate; X = Cl, N-3, PF6, or CF3SO3) are prepared by treatment of [Ru(eta(6)-p-cymene)Cl-2](2) with poly-(pyrazolyl)borate derivatives [M(L)] (L in general; in detail L = Ph(2)Bp = diphenylbis-(pyrazol-1-yl)borate; L = Tp = hydrotris(pyrazol-1-yl)borate; L = pzTp = tetrakis(pyrazol-1-yl)borate; L = Tp(4Bo) = hydrotris(indazol-1-yl)borate, L = T-p4Bo,T-5Me = (5-methylindazol-1-yl)borate; L = Tp(Bn,4Ph) = hydrotris(3-benzyl-4-phenylpyrazol-1-yl)borate; M = Na, K, or TI) and characterized by analytical and spectral data (IR, ESIMS, H-1 and C-13 NMR). The structures of [Ru(eta(6)-p-cymene)(Ph(2)Bp)Cl] (1) and [Ru(eta(6)-p-cymene)(Tp)Cl] (3) have been established by single-crystal X-ray diffraction analysis. Electrochemical studies allowed comparing the electron-donor characters of Tp and related ligands and estimating the corresponding values of the Lever E-L ligand parameter. The complexes [Ru(eta(6)-p-cymene)-(kappa(2)-L)X] and [Ru(eta(6)-p-cymene)(kappa(3)-L)]X center dot nH(2)O act as catalyst precursors for the diastereoselective nitroaldol reaction of benzaldehyde and nitroethane to the corresponding beta-nitroalkanol (up to 82% yield, at room temperature) with diastereoselectivity toward the formation of the threo isomer.

A Novel Short-Step Synthesis of New Xanthenedione Derivatives from the Cyclization of 3-Cinnamoyl-2-styrylchromones

Novel (E)-3-aryl-4-benzylidene-8-hydroxy-3,4-dihydro-1 H-xanthene-1,9(2H)-diones are prepared by the cyclization of (E,E)-3-cinnamoyl-5-hydroxy-2-styrylchromones efficiently catalyzed with boron tribromide. The (E,E)-3-cinnamoyl-5-hydroxy-2-styrylchromones are obtained from the Baker–Venkataraman rearrangement of (E,E)-2-acetyl-1,3-phenylene bis(3-phenylacrylate), which is greatly improved under microwave irradiation.

Implementação, validação e análise técnico-económico de alguns parâmetros analíticos no controlo de águas

Mestrado em Engenharia Química

Evolução hidrogeoquímica das águas sulfúreas de Entre-os-Rios: avaliação preliminar

O principal objectivo desta dissertação foi avaliar a evolução hidrogeoquímica das águas minerais de Entre‐os‐Rios, para uma melhor compreensão do modelo hidrogeológico conceptual deste sistema hidromineral. Desta forma, foram coligidos diversos dados hidroquímicos, quer das nascentes clássicas (Torre, Curveira, Ardias, Arcos Esquerda e Arcos Direita), quer do furo Barbeitos. Foram compiladas e analisadas oitenta análises hidroquímicas no período 1938‐2012, incluindo características organolépticas (cheiro, cor e turbidez), diversas propriedades físico-químicas (temperatura, pH, condutividade eléctrica, sulfuração, etc), os principais catiões e aniões (bicarbonato, fluoreto, sódio, lítio, etc) e os elementos vestigiários (chumbo, tungsténio, boro, etc). Além disso, foram integrados os dados históricos disponíveis de finais do século XIX e inícios do século XX. Foram igualmente reunidos e discutidos alguns dados isotópicos (oxigénio‐18, deutério e trítio). O recurso hidromineral de Entre‐os‐Rios está condicionado pela litologia e pelas condições tectónicas. As análises químicas revelaram que as águas minerais de Entre‐os‐Rios apresentam uma estabilidade química nos últimos 100 anos. Estas águas são orto‐ a hipertermais, fracamente mineralizadas, de reacção alcalina, sulfídricas, bicarbonatadas sódicas, carbonatadas e muito fluoretadas. Estas características são claramente distintas das águas normais da região. As águas de Entre‐os‐Rios são muito semelhantes às águas minerais de S. Vicente e, em diversos parâmetros, bastante diferentes das águas minerais das Caldas da Saúde. Os dados isotópicos permitiram concluir que as águas de Entre‐os‐Rios têm uma origem meteórica, com um tempo de residência longo no sistema aquífero, e que são, muito provavelmente, submodernas, com uma recarga anterior a 1952. Na região de Entre‐os‐Rios coexistem três sistemas aquíferos, um sistema granítico superficial, livre e um sistema livre a semi‐confinado, ambos com circulação de águas normais, e um sistema aquífero granítico, profundo, confinado, com circulação de água mineral.

Carbon monoxide, autophagy and cytoprotection in response to cerebral ischemia

Dissertação para obtenção do Grau de Mestre em Genética Molecular e Biomedicina

Green synthesis of 2-Oxazoline-based polymers with antimicrobial activity using scCO2

Using a green methodology, 17 different poly(2-oxazolines) were synthesized starting from four different oxazoline monomers. The polymerization reactions were conducted in supercritical carbon dioxide under a cationic ring-opening polymerization (CROP) mechanism using boron trifluoride diethyl etherate as the catalyst. The obtained living polymers were then end-capped with different types of amines, in order to confer them antimicrobial activity. For comparison, four polyoxazolines were end-capped with water, and by their hydrolysis the linear poly(ethyleneimine) (LPEI) was also produced. After functionalization the obtained polymers were isolated, purified and characterized by standard techniques (FT-IR, NMR, MALDI-TOF and GPC). The synthesized poly(2-oxazolines) revealed an unusual intrinsic blue photoluminescence. High concentration of carbonyl groups in the polymer backbone is appointed as a key structural factor for the presence of fluorescence and enlarges polyoxazolines’ potential applications. Microbiological assays were also performed in order to evaluate their antimicrobial profile against gram-positive Staphylococcus aureus NCTC8325-4 and gram-negative Escherichia coli AB1157 strains, two well known and difficult to control pathogens. The minimum inhibitory concentrations (MIC)s and killing rates of three synthesized polymers against both strains were determined. The end-capping with N,N-dimethyldodecylamine of living poly(2- methyl-2-oxazoline) and poly(bisoxazoline) led to materials with higher MIC values but fast killing rates (less than 5 minutes to achieve 100% killing for both bacterial species) than LPEI, a polymer which had a lower MIC value, but took a longer time to kill both E.coli and S.aureus cells. LPEI achieved 100% killing after 45 minutes in contact with E. coli and after 4 hours in contact with S.aureus. Such huge differences in the biocidal behavior of the different polymers can possibly underlie different mechanisms of action. In the future, studies to elucidate the obtained data will be performed to better understand the killing mechanisms of the polymers through the use of microbial cell biology techniques.

Study of grapevine solute transporters involved in berry quality. A biochemical and molecular approach

Tese de Doutoramento em Biologia de Plantas

Efeitos do enxofre e do boro e da inoculação em alfafa (Medicago sativa L.)

This paper deals with the results of a pot and plot experiment which was carried out to determine the influence of sulphur and boron and the effect seed inoculation with Rhizobium meliloti in the yield of alfafa. Sulphur was applied as flower of sulphur at the rates of 1,000 and 2,000 kg por hectare; boron was employed in the proportion of 15 kg of borax per hectare; both sulphur and boron were distributed broadcast before planting; the experimental design chosen for the field trial was a latin square of 6 x 6 with the following treatments: Number Treatment 1 Control 2 One dosis S + inoculation 3 Two dosis S +inoculation 4 One dosis S + B + inoculation 5 B + inoculation 6 inoculation The crop supplied four cuttings in an eleven months period. The pot experiment nearly confirmed the plot one. The following conclusions can be drawn: 1. The classification of treatments in a decrescent order was: l.o - two doses S + inoculation; 2.o - one dosis S +inoculation, S + B + inoculation, and B + inoculation (these treatmente were not statistically different); 3.o - control; 4.o - inoculation; 2 The vield due to the treatment two dosis S + inoculation was 22 per cent higher than the control one, a fact that suggests that the S supply in the soil studied ("terra roxa misturada") is not sufficient for the total requirements of alfafa; 3. From an economical point of view the best treatment was: one dosis B + inoculation which permits a net gain of Cr$ 12.527,30 per hectare per year; 4. Based on the mentioned results we recommend in soils of same type the following fertilization for alfafa. 5 tons limestone/hectare 300 kg serranafosfato and 600 kg hiperfosfato/ha 300 kg muriate of potash/ha 15 kg borax/ha and a medium organic manuring if the soil is very poor in organic matter.

Non root feeding with two sources of zinc on Coffea arábica L. 'mundo novo'(B.Rodr.) Choussy

A trial was carried out on an eight old coffee plantation with visible zinc problems. The plantation was situated nearly the city of Jaú (22º30'S, 48º30'W). State of São Paulo, Brazil. The soil is classified as medium texture Oxisol of low base saturation (Latossol Vermelho Amarelo - fase arenosa). The pulverization program started in november 1977, followed in march and July 1978 (heavy harvest) and ended in march and July 1979 (light harvest). Is should be mentioned that a well reconized characteristic of arábica coffe is its habit of biennial bearing, a very heavy harvest is most often followed by a light load the next year. The following treatments and amounts of chemicals per cova hole (4 trees) were tested in accordance with a random block design: 1. 1 g of zinc (zinc sulphate, 0.5%) 2. 3 g of nitrogen (urea, 1.3%) 3. 1 g of zinc + 3 g of nitrogen (zinc sulphate 0.5% + urea 1.3%) 4. 0.25 g, 0.50 g, 1.00 g, 2.00 g of zinc plus 0.75 g, 1.50 g, 3.00 g and 6.00 of nitrogen (correspondent to NZN* 15-0-0-5 as 0.75%, 1-5%, 3.0% and 6.0% by v/v). Foliar absorption data were obtained by collecting the 3rd and 4th pairs of the coffee leaves and analysed them for N, P, K, Ca, Mg, S, B, Cu, Fe, Mn, and Zn. The main results may be summarized as follows: 1. The maximum calculated yields of clean coffee were obtained by the applications of 5.84 1 of NZN (1.13%) per hectare. 2. The applications of zinc sulphate (0.5%) and urea (1.3%) together or separate did not affected the coffee bean production. 3. The applications of 15.0 1 of NZN per hectare reduced the coffee yields. 4. Leaf damages and burning symptoms were observed by the applications of urea (1.3%) plus zinc sulphate (0.5%) and larger doses than 7.5 1 of NZN per hectare. 5. Leaf tissue analysis show that the concentrations of the elements were affecred by the age of the leaves and by the yields of the coffee trees. 6. The applications of increasing doses of NZN causes an increase in the concentration of zinc, manganese and boron in the leaves and decreased the concentration in calcium and potassium the leaves. 7. The concentration of zinc in the leaves associated with the heavy harvest, in July, was 70.0 ppm.