A chromosomal region on ECA13 is associated with maxillary prognathism in horses.

Hereditary variations in head morphology and head malformations are known in many species. The most common variation encountered in horses is maxillary prognathism. Prognathism and brachygnathism are syndromes of the upper and lower jaw, respectively. The resulting malocclusion can negatively affect teeth wear, and is considered a non-desirable trait in breeding programs. We performed a case-control analysis for maxillary prognathism in horses using 96 cases and 763 controls. All horses had been previously genotyped with a commercially available 50 k SNP array. We analyzed the data with a mixed-model considering the genomic relationships in order to account for population stratification. Two SNPs within a region on the distal end of chromosome ECA 13 reached the Bonferroni corrected genome-wide significance level. There is no known prognathism candidate gene located within this region. Therefore, our findings in the horse offer the possibility of identifying a novel gene involved in the complex genetics of prognathism that might also be relevant for humans and other livestock species.

Insular and caudate lesions release abnormal yawning in stroke patients.

Abnormal yawning is an underappreciated phenomenon in patients with ischemic stroke. We aimed at identifying frequently affected core regions in the supratentorial brain of stroke patients with abnormal yawning and contributing to the anatomical network concept of yawning control. Ten patients with acute anterior circulation stroke and ≥3 yawns/15 min without obvious cause were analyzed. The NIH stroke scale (NIHSS), Glasgow Coma Scale (GCS), symptom onset, period with abnormal yawning, blood oxygen saturation, glucose, body temperature, blood pressure, heart rate, and modified Rankin scale (mRS) were assessed for all patients. MRI lesion maps were segmented on diffusion-weighted images, spatially normalized, and the extent of overlap between the different stroke patterns was determined. Correlations between the period with abnormal yawning and the apparent diffusion coefficient (ADC) in the overlapping regions, total stroke volume, NIHSS and mRS were performed. Periods in which patients presented with episodes of abnormal yawning lasted on average for 58 h. Average GCS, NIHSS, and mRS scores were 12.6, 11.6, and 3.5, respectively. Clinical parameters were within normal limits. Ischemic brain lesions overlapped in nine out of ten patients: in seven patients in the insula and in seven in the caudate nucleus. The decrease of the ADC within the lesions correlated with the period with abnormal yawing (r = -0.76, Bonferroni-corrected p = 0.02). The stroke lesion intensity of the common overlapping regions in the insula and the caudate nucleus correlates with the period with abnormal yawning. The insula might be the long sought-after brain region for serotonin-mediated yawning.

Precision of fit and retention force of cast non-precious-crowns on standard titanium implant-abutment with different design and height

OBJECTIVE The cost-effectiveness of cast nonprecious frameworks has increased their prevalence in cemented implant crowns. The purpose of this study was to assess the effect of the design and height of the retentive component of a standard titanium implant abutment on the fit, possible horizontal rotation and retention forces of cast nonprecious alloy crowns prior to cementation. MATERIALS AND METHODS Two abutment designs were examined: Type A with a 6° taper and 8 antirotation planes (Straumann Tissue-Level RN) and Type B with a 7.5° taper and 1 antirotation plane (SICace implant). Both types were analyzed using 60 crowns: 20 with a full abutment height (6 mm), 20 with a medium abutment height (4 mm), and 20 with a minimal (2.5 mm) abutment height. The marginal and internal fit and the degree of possible rotation were evaluated by using polyvinylsiloxane impressions under a light microscope (magnification of ×50). To measure the retention force, a custom force-measuring device was employed. STATISTICAL ANALYSIS one-sided Wilcoxon rank-sum tests with Bonferroni-Holm corrections, Fisher's exact tests, and Spearman's rank correlation coefficient. RESULTS Type A exhibited increased marginal gaps (primary end-point: 55 ± 20 μm vs. 138 ± 59 μm, P < 0.001) but less rotation (P < 0.001) than Type B. The internal fit was also better for Type A than for Type B (P < 0.001). The retention force of Type A (2.49 ± 3.2 N) was higher (P = 0.019) than that of Type B (1.27 ± 0.84 N). Reduction in abutment height did not affect the variables observed. CONCLUSION Less-tapered abutments with more antirotation planes provide an increase in the retention force, which confines the horizontal rotation but widens the marginal gaps of the crowns. Thus, casting of nonprecious crowns with Type A abutments may result in clinically unfavorable marginal gaps.

Characterization of small ruminant lentivirus A4 subtype isolates and assessment of their pathogenic potential in naturally infected goats.

BACKGROUND Small ruminant lentiviruses escaping efficient serological detection are still circulating in Swiss goats in spite of a long eradication campaign that essentially eliminated clinical cases of caprine arthritis encephalitis in the country. This strongly suggests that the circulating viruses are avirulent for goats.To test this hypothesis, we isolated circulating viruses from naturally infected animals and tested the in vitro and in vivo characteristics of these field isolates. METHODS Viruses were isolated from primary macrophage cultures. The presence of lentiviruses in the culture supernatants was monitored by reverse transcriptase assay. Isolates were passaged in different cells and their cytopathogenic effects monitored by microscopy. Proviral load was quantified by real-time PCR using customized primer and probes. Statistical analysis comprised Analysis of Variance and Bonferroni Multiple Comparison Test. RESULTS The isolated viruses belonged to the small ruminant lentiviruses A4 subtype that appears to be prominent in Switzerland. The 4 isolates replicated very efficiently in macrophages, displaying heterogeneous phenotypes, with two isolates showing a pronounced cytopathogenicity for these cells. By contrast, all 4 isolates had a poor replication capacity in goat and sheep fibroblasts. The proviral loads in the peripheral blood and, in particular, in the mammary gland were surprisingly high compared to previous observations. Nevertheless, these viruses appear to be of low virulence for goats except for the mammary gland were histopathological changes were observed. CONCLUSIONS Small ruminant lentiviruses continue to circulate in Switzerland despite a long and expensive caprine arthritis encephalitis virus eradication campaign. We isolated 4 of these lentiviruses and confirmed their phylogenetic association with the prominent A4 subtype. The pathological and histopathological analysis of the infected animals supported the hypothesis that these A4 viruses are of low pathogenicity for goats, with, however, a caveat about the potentially detrimental effects on the mammary gland. Moreover, the high proviral load detected indicates that the immune system of the animals cannot control the infection and this, combined with the phenotypic plasticity observed in vitro, strongly argues in favour of a continuous and precise monitoring of these SRLV to avoid the risk of jeopardizing a long eradication campaign.

Orthotopic Ileal Bladder Substitution in Women: Factors Influencing Urinary Incontinence and Hypercontinence.

BACKGROUND Urinary incontinence or the inability to void spontaneously after ileal orthotopic bladder substitution is a frequent finding in female patients. OBJECTIVE To evaluate how hysterectomy and nerve sparing affect functional outcomes and whether these relate to pre- and postoperative urethral pressure profile (UPP) results. DESIGN, SETTING, AND PARTICIPANTS Prospectively performed pre- and postoperative UPPs of 73 female patients who had undergone cystectomy and bladder substitution were correlated with postoperative voiding and continence status. OUTCOME MEASUREMENTS AND STATISTICAL ANALYSIS Outcome analyses were performed with the Kruskal-Wallis test, Wilcoxon-Mann-Whitney, or two-group post hoc testing with the Bonferroni correction. Chi-square or Fisher exact tests were applied for the categorical data. RESULTS AND LIMITATIONS Of postoperatively continent or hypercontinent patients, 22 of 43 (51.2%) had the uterus preserved; of incontinent patients, only 4 of 30 (13.3%, p<0.01) had the uterus preserved. Of postoperatively continent or hypercontinent patients, 27 of 43 patients (62.8%) had bilateral and 15 of 43 (34.9%) had unilateral attempted nerve sparing. In incontinent patients, 11 of 30 (36.7%) had bilateral and 16 of 30 (53.3%) had unilateral attempted nerve sparing (p=0.02). When compared with postoperatively incontinent patients, postoperatively continent patients had a longer functional urethral length (median: 32mm vs 24mm; p<0.001), a higher postoperative urethral closing pressure at rest (56cm H2O vs 35cm H2O; p<0.001) as well as a higher preoperative urethral closing pressure at rest (74cm H2O vs 47.5cm H2O; p=0.01). The main limitation was the limited number of patients. CONCLUSIONS In female patients undergoing radical cystectomy and bladder substitution, preservation of the uterus and attempted nerve sparing results in better functional outcomes. The preoperative UPPs correlate with postoperative voiding and continence status and may predict which patients are at a higher risk of functional failure after bladder substitution. PATIENT SUMMARY If preservation of the urethra's innervation is not possible during cystectomy, poor functional results with bladder substitutes are likely.

Bond Strength of Resin Composite to Dentin with Different Adhesive Systems: Influence of Relative Humidity and Application Time.

PURPOSE To investigate the influence of relative humidity and application time on bond strength to dentin of different classes of adhesive systems. MATERIALS AND METHODS A total of 360 extracted human molars were ground to mid-coronal dentin. The dentin specimens were treated with one of six adhesive systems (Syntac Classic, OptiBond FL, Clearfil SE Bond, AdheSE, Xeno Select, or Scotchbond Universal), and resin composite (Filtek Z250) was applied to the treated dentin surface under four experimental conditions (45% relative humidity/application time according to manufacturers' instructions; 45% relative humidity/reduced application time; 85% relative humidity/application time according to manufacturers' instructions; 85% relative humidity/reduced application time). After storage (37°C, 100% humidity, 24 h), shear bond strength (SBS) was measured and data analyzed with nonparametric ANOVA followed by Kruskal-Wallis tests and Mann-Whitney U-tests with Bonferroni-Holm correction for multiple testing (level of significance: α = 0.05). RESULTS Increased relative humidity and reduced application time had no effect on SBS for Clearfil SE Bond and Scotchbond Universal (p = 1.00). For Syntac Classic, OptiBond FL, AdheSE, and Xeno Select there was no effect on SBS of reduced application time of the adhesive system (p ≥ 0.403). However, increased relative humidity significantly reduced SBS for Syntac Classic, OptiBond FL, and Xeno Select irrespective of application time (p ≤ 0.003), whereas for AdheSE, increased relative humidity significantly reduced SBS at recommended application time only (p = 0.002). CONCLUSION Generally, increased relative humidity had a detrimental effect on SBS to dentin, but reduced application time had no effect.

Einfluss von relativer Luftfeuchtigkeit und Applikationszeit auf die Dentinhaftkraft von sechs verschiedenen Adhäsivsystemen

Einleitung und Ziel: Das Arbeiten mit Adhäsivsystemen und Kompositmaterialien ist techniksensitiv und oft auch zeitaufwändig. Adhäsivsysteme und Kompositmaterialien sind feuchtigkeitsanfällig, weswegen die Verwendung eines Kofferdams von den Herstellern empfohlen wird - nicht nur, um während des Arbeitens mit Adhäsivsystemen und Kompositmaterialien die Gefahr einer Blut- oder Speichelkontamination zu minimieren sondern auch, um die hohe relative Luftfeuchtigkeit in der Mundhöhle auf die Luftfeuchtigkeit der Umgebung zu reduzieren. Abgesehen davon bestehen viele Adhäsivsysteme aus mehreren Applikationsschritten und diese Applikationsschritte weisen jeweils von den Herstellern genau angegebene Applikationszeiten auf. Je nach Adhäsivsystem erscheinen diese Applikationszeiten relativ lang und im klinischen Alltag kann die Gefahr bestehen, dass es zu einer Reduktion der vom Hersteller angegeben Applikationszeiten kommt. Es ist sehr wahrscheinlich, dass sowohl erhöhte relative Luftfeuchtigkeit als auch reduzierte Applikationszeiten die Dentinhaftkraft von Adhäsivsystemen negativ beeinflussen. Das Ziel dieser Studie war folglich, den Einfluss von relativer Luftfeuchtigkeit und Applikationszeit auf die Dentinhaftkraft von sechs verschiedenen Adhäsivsystemen zu untersuchen. Material und Methoden: Insgesamt 360 extrahierte menschliche Molaren ohne Füllungen und/oder Karies wurden verwendet (n=15 pro Gruppe; 24 Gruppen). Die Molaren wurden gereinigt und von okklusal bis ins mittlere Zahnkronendentin plangeschliffen. Die plangeschliffenen Molaren wurden anschliessend in selbsthärtendem Kunststoff eingebettet. Danach wurden die Oberflächen des Zahnkronendentins mit einem von sechs Adhäsivsystemen behandelt und Komposit (Filtek Z250; 3M ESPE) in Form eines Zylinders appliziert. Die sechs Adhäsivsysteme umfassten: 1) Syntac Classic (Ivoclar Vivadent), 2) OptiBond FL (Kerr), 3) Clearfil SE Bond (Kuraray), 4) AdheSE (Ivoclar Vivadent), 5) Xeno Select (DENTSPLY DeTrey) sowie 6) Scotchbond Universal (3M ESPE). Die Applikation des Adhäsivsystems und des Kompositzylinders wurde unter vier experimentellen Bedingungen durchgeführt. Die vier experimentellen Bedingungen wurden in einer modifizierten Handschuhbox erstellt (Abb. 1; CSL-GB24, Cleaver Scientific, Rugby, Grossbritannien) und umfassten: a) relative Luftfeuchtigkeit der Umgebung (~45%) und Applikationszeit gemäss Herstellerangaben, b) relative Luftfeuchtigkeit der Umgebung (~45%) und reduzierte Applikationszeit, c) erhöhte relative Luftfeuchtigkeit (≥85%) und Applikationszeit gemäss Herstellerangaben sowie d) erhöhte relative Luftfeuchtigkeit (≥85%) und reduzierte Applikationszeit. Nach 24 Stunden Lagerung wurden die auf Dentin applizierten Kompositzylinder in einer Universalprüfmaschine (Abb. 2; zwicki Z1.0 TN, Zwick, Ulm, Deutschland) mittels Scherkrafttest belastet (Traversengeschwindigkeit: 1 mm/min) und so die Haftkraftwerte bestimmt. Die Haftkraftwerte wurden anschliessend mit einer nichtparametrischen Varianzanalyse statistisch analysiert, gefolgt von Kruskal-Wallis- und Mann Whitney U-Tests sowie einer Bonferroni-Holm Korrektur für multiples Testen. Das Signifikanzniveau wurde auf α = 0.05 festgelegt. Resultate: Erhöhte relative Luftfeuchtigkeit sowie reduzierte Applikationszeit hatten keinen signifikanten Einfluss auf die Haftkraft von zwei der sechs untersuchten Adhäsivsysteme (Clearfil SE Bond und Scotchbond Universal; p = 1.00). Die Haftkraft der anderen vier Adhäsivsysteme (Syntac Classic, OptiBond FL, AdheSE und Xeno Select) wurde durch eine reduzierte Applikationszeit nicht signifikant beeinflusst (p ≥ 0.403). Allerdings reduzierte eine erhöhte relative Luftfeuchtigkeit (ungeachtet der Applikationszeit) die Haftkraft von Syntac Classic, OptiBond FL und Xeno Select signifikant (p ≤ 0.003). Eine erhöhte relative Luftfeuchtigkeit reduzierte die Haftkraft von AdheSE nur dann signifikant, wenn das Adhäsivsystem mit Applikationszeit gemäss Herstellerangaben verwendet wurde (p = 0.002). Hinsichtlich Unterschiede in der Haftkraft zwischen den sechs Adhäsivsystemen zeigte sich, dass OptiBond FL und Scotchbond Universal generell (sprich ungeachtet der vier experimentellen Bedingungen) die höchste Haftkraft erzielten. Von den anderen vier Adhäsivsystemen wurde Clearfil SE Bond am wenigsten durch erhöhte relative Luftfeuchtigkeit oder reduzierte Applikationszeit beeinflusst und zeigte zwar niedrigere Haftkraftwerte im Vergleich zu OptiBond FL und Scotchbond Universal dafür aber die konstanteste Haftkraft unter allen vier experimentellen Bedingungen. Schlussfolgerung: Die Dentinhaftkraft von zwei der sechs untersuchten Adhäsivsysteme (Clearfil SE Bond und Scotchbond Universal) wurde weder durch erhöhte relative Luftfeuchtigkeit noch durch reduzierte Applikationszeiten beeinflusst. Die Haftkraft der anderen vier Adhäsivsysteme wurde vor allem durch eine erhöhte relative Luftfeuchtigkeit negativ beeinflusst, grossmehrheitlich aber nicht durch eine reduzierte Applikationszeit. Klinisch ist daher die Kontrolle und Reduktion der relativen Luftfeuchtigkeit durch die Verwendung eines Kofferdams sehr zu empfehlen. Obwohl diese Studie gezeigt hat, dass reduzierte Applikationszeiten einen weniger starken, negativen Einfluss auf die Haftkraft haben, ist es trotzdem angezeigt, die Gebrauchsanleitungen der Adhäsivsysteme zu befolgen und sich an die Herstellerangaben zu halten.

Clinical relevance of DPYD variants c.1679T>G, c.1236G>A/HapB3, and c.1601G>A as predictors of severe fluoropyrimidine-associated toxicity: a systematic review and meta-analysis of individual patient data

BACKGROUND The best-known cause of intolerance to fluoropyrimidines is dihydropyrimidine dehydrogenase (DPD) deficiency, which can result from deleterious polymorphisms in the gene encoding DPD (DPYD), including DPYD*2A and c.2846A>T. Three other variants-DPYD c.1679T>G, c.1236G>A/HapB3, and c.1601G>A-have been associated with DPD deficiency, but no definitive evidence for the clinical validity of these variants is available. The primary objective of this systematic review and meta-analysis was to assess the clinical validity of c.1679T>G, c.1236G>A/HapB3, and c.1601G>A as predictors of severe fluoropyrimidine-associated toxicity. METHODS We did a systematic review of the literature published before Dec 17, 2014, to identify cohort studies investigating associations between DPYD c.1679T>G, c.1236G>A/HapB3, and c.1601G>A and severe (grade ≥3) fluoropyrimidine-associated toxicity in patients treated with fluoropyrimidines (fluorouracil, capecitabine, or tegafur-uracil as single agents, in combination with other anticancer drugs, or with radiotherapy). Individual patient data were retrieved and analysed in a multivariable analysis to obtain an adjusted relative risk (RR). Effect estimates were pooled by use of a random-effects meta-analysis. The threshold for significance was set at a p value of less than 0·0167 (Bonferroni correction). FINDINGS 7365 patients from eight studies were included in the meta-analysis. DPYD c.1679T>G was significantly associated with fluoropyrimidine-associated toxicity (adjusted RR 4·40, 95% CI 2·08-9·30, p<0·0001), as was c.1236G>A/HapB3 (1·59, 1·29-1·97, p<0·0001). The association between c.1601G>A and fluoropyrimidine-associated toxicity was not significant (adjusted RR 1·52, 95% CI 0·86-2·70, p=0·15). Analysis of individual types of toxicity showed consistent associations of c.1679T>G and c.1236G>A/HapB3 with gastrointestinal toxicity (adjusted RR 5·72, 95% CI 1·40-23·33, p=0·015; and 2·04, 1·49-2·78, p<0·0001, respectively) and haematological toxicity (adjusted RR 9·76, 95% CI 3·03-31·48, p=0·00014; and 2·07, 1·17-3·68, p=0·013, respectively), but not with hand-foot syndrome. DPYD*2A and c.2846A>T were also significantly associated with severe fluoropyrimidine-associated toxicity (adjusted RR 2·85, 95% CI 1·75-4·62, p<0·0001; and 3·02, 2·22-4·10, p<0·0001, respectively). INTERPRETATION DPYD variants c.1679T>G and c.1236G>A/HapB3 are clinically relevant predictors of fluoropyrimidine-associated toxicity. Upfront screening for these variants, in addition to the established variants DPYD*2A and c.2846A>T, is recommended to improve the safety of patients with cancer treated with fluoropyrimidines. FUNDING None.

Metal Artifact Reduction in Pelvic Computed Tomography With Hip Prostheses: Comparison of Virtual Monoenergetic Extrapolations From Dual-Energy Computed Tomography and an Iterative Metal Artifact Reduction Algorithm in a Phantom Study.

OBJECTIVE The aim of this study was to directly compare metal artifact reduction (MAR) of virtual monoenergetic extrapolations (VMEs) from dual-energy computed tomography (CT) with iterative MAR (iMAR) from single energy in pelvic CT with hip prostheses. MATERIALS AND METHODS A human pelvis phantom with unilateral or bilateral metal inserts of different material (steel and titanium) was scanned with third-generation dual-source CT using single (120 kVp) and dual-energy (100/150 kVp) at similar radiation dose (CT dose index, 7.15 mGy). Three image series for each phantom configuration were reconstructed: uncorrected, VME, and iMAR. Two independent, blinded radiologists assessed image quality quantitatively (noise and attenuation) and subjectively (5-point Likert scale). Intraclass correlation coefficients (ICCs) and Cohen κ were calculated to evaluate interreader agreements. Repeated measures analysis of variance and Friedman test were used to compare quantitative and qualitative image quality. Post hoc testing was performed using a corrected (Bonferroni) P < 0.017. RESULTS Agreements between readers were high for noise (all, ICC ≥ 0.975) and attenuation (all, ICC ≥ 0.986); agreements for qualitative assessment were good to perfect (all, κ ≥ 0.678). Compared with uncorrected images, VME showed significant noise reduction in the phantom with titanium only (P < 0.017), and iMAR showed significantly lower noise in all regions and phantom configurations (all, P < 0.017). In all phantom configurations, deviations of attenuation were smallest in images reconstructed with iMAR. For VME, there was a tendency toward higher subjective image quality in phantoms with titanium compared with uncorrected images, however, without reaching statistical significance (P > 0.017). Subjective image quality was rated significantly higher for images reconstructed with iMAR than for uncorrected images in all phantom configurations (all, P < 0.017). CONCLUSIONS Iterative MAR showed better MAR capabilities than VME in settings with bilateral hip prosthesis or unilateral steel prosthesis. In settings with unilateral hip prosthesis made of titanium, VME and iMAR performed similarly well.

Einfluss von Politursystemen auf Oberflächenrauigkeit und mechanische Eigenschaften von CAD/CAM-Materialien

Zielsetzung: Das Ziel dieser Studie war, den Einfluss von drei Politursystemen auf die Oberflächenrauigkeit von verschiedenen Materialien für computer-aided design/computer-aided manufacturing (CAD/CAM) Restaurationen mittels Profilometrie sowie die mikromechanischen Eigenschaften der Materialien mittels Mikrohärtemessgerät zu analysieren. Materialien und Methoden: Von dem CAD/CAM-Kompositmaterial Paradigm MZ100 (3M ESPE), der CAD/CAM-Feldspatkeramik VITABLOCS Mark II (VITA Zahnfabrik) und den CAD/CAM-Hybridmaterialien Lava Ultimate (3M ESPE), VITA ENAMIC (VITA Zahnfabrik) und AMBARINO High-Class (Creamed) wurden je 60 Prüfkörper zugeschnitten, gekennzeichnet und standardisiert aufgerauht. Die standardisierte Aufrauhung wurde mit Baseline-Rauigkeitsmessungen überprüft (Ra und Rz; µm). Die Prüfkörper wurden mit einem von drei Politursystemen poliert (n=20 pro CAD/CAM-Material): 1) Sof-Lex Scheiben (Disc-System, 3 Politurschritte: medium, fein und superfein; 3M ESPE), 2) VITA Polishing Set Clinical (Silikonpolitursystem, 2 Politurschritte: medium und fein; VITA Zahnfabrik) oder 3) KENDA Nobilis (Silikonpolierer, 1 Politurschritt (universal); KENDA Dental). Nach Politur der Prüfkörper wurden Ra und Rz sowie die mikromechanischen Eigenschaften Oberflächenhärte (VHN; Vickers Härte) und Elastizitätsmodul (EM; GPa) gemessen. In den darauf folgenden sechs Monaten wurden die Prüfkörper in Leitungswasser gelagert und insgesamt sechs Mal einem maschinellem Zahnbürsten zugeführt. Anschliessend wurden erneut Ra und Rz sowie VHN und EM gemessen. Ra-, Rz-, VHN- und EM-Werte wurden mittels nichtparametrischer ANOVA global analysiert und die p-Werte mittels Bonferroni-Holm Korrektur für multiples Testen korrigiert. Als post-hoc Tests wurden Kruskal-Wallis-Tests sowie exakte Wilcoxon Rangsummen-Tests verwendet und die p-Werte wurden nicht korrigiert. Das Signifikanzniveau wurde auf α=0,05 festgelegt. Resultate: Für alle drei CAD/CAM-Hybridmaterialien ergaben Sof-Lex Scheiben nach der Politur die tiefste Oberflächenrauigkeit (d. h. die tiefsten Ra- und Rz-Werte), gefolgt von KENDA Nobilis und von dem VITA Polishing Set Clinical. Bei dem CAD/CAM-Kompositmaterial sowie bei der CAD/CAM-Feldspatkeramik ergaben Sof-Lex Scheiben und KENDA Nobilis ähnliche Resultate, gefolgt von dem VITA Polishing Set Clinical. Bei einigen CAD/CAM-Materialien zeigten sich – zum Teil in Abhängigkeit des Politursystems – nach maschinellem Zahnbürsten und Lagerung signifikant höhere Ra- und Rz-Werte. Die CAD/CAM-Materialien zeigten unabhängig des Politursystems und der Lagerung signifikant verschiedene VHN- und EM-Werte. Bei einigen CAD/CAM-Materialien zeigten sich – zum Teil ebenfalls in Abhängigkeit des Politursystems – nach maschinellem Zahn-bürsten und Lagerung signifikant tiefere VHN- und EM-Werte. Schlussfolgerungen: Die Wahl des Politursystems beeinflusste die Oberflächenrauigkeit der CAD/CAM-Materialien markant, wobei Sof-Lex Scheiben insgesamt die besten Politurresultate zeigten, gefolgt von dem Silikonpolierer KENDA Nobilis. Von der Verwendung des Silikonpolitursystems VITA Polishing Set Clinical muss eher abgeraten werden. Das CAD/CAM-Kompositmaterial Paradigm MZ100 und die CAD/CAM-Hybridmaterialien Lava Ultimate und AMBARINO High-Class als weichere und elastischere Materialien liessen sich insgesamt besser polieren, waren aber bezüglich mechanischer Eigenschaften anfälliger auf Lagerung als die härtere CAD/CAM-Feldspatkeramik VITABLOCS Mark II und das CAD/CAM-Hybridmaterial VITA ENAMIC.

Cerebral Gaseous Microemboli are Detectable During Continuous Venovenous Hemodialysis in Critically Ill Patients: An Observational Pilot Study

BACKGROUND Continuous venovenous hemodialysis (CVVHD) may generate microemboli that cross the pulmonary circulation and reach the brain. The aim of the present study was to quantify (load per time interval) and qualify (gaseous vs. solid) cerebral microemboli (CME), detected as high-intensity transient signals, using transcranial Doppler ultrasound. MATERIALS AND METHODS Twenty intensive care unit (ICU group) patients requiring CVVHD were examined. CME were recorded in both middle cerebral arteries for 30 minutes during CVVHD and a CVVHD-free interval. Twenty additional patients, hospitalized for orthopedic surgery, served as a non-ICU control group. Statistical analyses were performed using the Mann-Whitney U test or the Wilcoxon matched-pairs signed-rank test, followed by Bonferroni corrections for multiple comparisons. RESULTS In the non-ICU group, 48 (14.5-169.5) (median [range]) gaseous CME were detected. In the ICU group, the 67.5 (14.5-588.5) gaseous CME detected during the CVVHD-free interval increased 5-fold to 344.5 (59-1019) during CVVHD (P<0.001). The number of solid CME was low in all groups (non-ICU group: 2 [0-5.5]; ICU group CVVHD-free interval: 1.5 [0-14.25]; ICU group during CVVHD: 7 [3-27.75]). CONCLUSIONS This observational pilot study shows that CVVHD was associated with a higher gaseous but not solid CME burden in critically ill patients. Although the differentiation between gaseous and solid CME remains challenging, our finding may support the hypothesis of microbubble generation in the CVVHD circuit and its transpulmonary translocation toward the intracranial circulation. Importantly, the impact of gaseous and solid CME generated during CVVHD on brain integrity of critically ill patients currently remains unknown and is highly debated.

The information bottleneck method for genome-wide association studies

In population studies, most current methods focus on identifying one outcome-related SNP at a time by testing for differences of genotype frequencies between disease and healthy groups or among different population groups. However, testing a great number of SNPs simultaneously has a problem of multiple testing and will give false-positive results. Although, this problem can be effectively dealt with through several approaches such as Bonferroni correction, permutation testing and false discovery rates, patterns of the joint effects by several genes, each with weak effect, might not be able to be determined. With the availability of high-throughput genotyping technology, searching for multiple scattered SNPs over the whole genome and modeling their joint effect on the target variable has become possible. Exhaustive search of all SNP subsets is computationally infeasible for millions of SNPs in a genome-wide study. Several effective feature selection methods combined with classification functions have been proposed to search for an optimal SNP subset among big data sets where the number of feature SNPs far exceeds the number of observations. ^ In this study, we take two steps to achieve the goal. First we selected 1000 SNPs through an effective filter method and then we performed a feature selection wrapped around a classifier to identify an optimal SNP subset for predicting disease. And also we developed a novel classification method-sequential information bottleneck method wrapped inside different search algorithms to identify an optimal subset of SNPs for classifying the outcome variable. This new method was compared with the classical linear discriminant analysis in terms of classification performance. Finally, we performed chi-square test to look at the relationship between each SNP and disease from another point of view. ^ In general, our results show that filtering features using harmononic mean of sensitivity and specificity(HMSS) through linear discriminant analysis (LDA) is better than using LDA training accuracy or mutual information in our study. Our results also demonstrate that exhaustive search of a small subset with one SNP, two SNPs or 3 SNP subset based on best 100 composite 2-SNPs can find an optimal subset and further inclusion of more SNPs through heuristic algorithm doesn't always increase the performance of SNP subsets. Although sequential forward floating selection can be applied to prevent from the nesting effect of forward selection, it does not always out-perform the latter due to overfitting from observing more complex subset states. ^ Our results also indicate that HMSS as a criterion to evaluate the classification ability of a function can be used in imbalanced data without modifying the original dataset as against classification accuracy. Our four studies suggest that Sequential Information Bottleneck(sIB), a new unsupervised technique, can be adopted to predict the outcome and its ability to detect the target status is superior to the traditional LDA in the study. ^ From our results we can see that the best test probability-HMSS for predicting CVD, stroke,CAD and psoriasis through sIB is 0.59406, 0.641815, 0.645315 and 0.678658, respectively. In terms of group prediction accuracy, the highest test accuracy of sIB for diagnosing a normal status among controls can reach 0.708999, 0.863216, 0.639918 and 0.850275 respectively in the four studies if the test accuracy among cases is required to be not less than 0.4. On the other hand, the highest test accuracy of sIB for diagnosing a disease among cases can reach 0.748644, 0.789916, 0.705701 and 0.749436 respectively in the four studies if the test accuracy among controls is required to be at least 0.4. ^ A further genome-wide association study through Chi square test shows that there are no significant SNPs detected at the cut-off level 9.09451E-08 in the Framingham heart study of CVD. Study results in WTCCC can only detect two significant SNPs that are associated with CAD. In the genome-wide study of psoriasis most of top 20 SNP markers with impressive classification accuracy are also significantly associated with the disease through chi-square test at the cut-off value 1.11E-07. ^ Although our classification methods can achieve high accuracy in the study, complete descriptions of those classification results(95% confidence interval or statistical test of differences) require more cost-effective methods or efficient computing system, both of which can't be accomplished currently in our genome-wide study. We should also note that the purpose of this study is to identify subsets of SNPs with high prediction ability and those SNPs with good discriminant power are not necessary to be causal markers for the disease.^

Comparison of multiple comparison methods for identifying differential gene expression in simulated and real papillary thyroid cancer microarray data

The difficulty of detecting differential gene expression in microarray data has existed for many years. Several correction procedures try to avoid the family-wise error rate in multiple comparison process, including the Bonferroni and Sidak single-step p-value adjustments, Holm's step-down correction method, and Benjamini and Hochberg's false discovery rate (FDR) correction procedure. Each multiple comparison technique has its advantages and weaknesses. We studied each multiple comparison method through numerical studies (simulations) and applied the methods to the real exploratory DNA microarray data, which detect of molecular signatures in papillary thyroid cancer (PTC) patients. According to our results of simulation studies, Benjamini and Hochberg step-up FDR controlling procedure is the best process among these multiple comparison methods and we discovered 1277 potential biomarkers among 54675 probe sets after applying the Benjamini and Hochberg's method to PTC microarray data.^

Cross-culture perspectives on fear of HIV disease and AIDS in health care workers

Health care workers have been known to carry into the workplace a variety of judgmental and negative attitudes towards their patients. In no other area of patient care has this issue been more pronounced as in the management of patients with AIDS. Health care workers have refused to treat or manage patients with AIDS and have often treated them more harshly than identically described leukemia patients. Some health care institutions have simply refused to admit patients with AIDS and even recent applicants to medical colleges and schools of nursing have indicated a preference for schools in areas with low prevalence of HIV disease. Since the attitudes of health care workers do have significant consequences on patient management, this study was carried out to determine the differences in clinical practice in Nigeria and the United States of America as it relates to knowledge of a patient's HIV status, determine HIV prevalence and culture in each of the study sites and how they impact on infection control practices, determine the relationship between infection control practices and fear of AIDS, and also determine the predictors of safe infection control practices in each of the study sites.^ The study utilized the 38-item fear of AIDS scale and the measure of infection control questionnaire for its data. Questionnaires were administered to health care workers at the university teaching hospital sites of Houston, Texas and Calabar in Nigeria. Data was analyzed using a chi-square test, and where appropriate, a student t-tests to establish the demographic variables for each country. Factor analysis was done using principal components analysis followed by varimax rotation to simple structure. The subscale scores for each study site were compared using t-tests (separate variance estimates) and utilizing Bonferroni adjustments for number of tests. Finally, correlations were carried out between infection control procedures and fear of AIDS in each study site using Pearson-product moment correlation coefficients.^ The study revealed that there were five dimensions of the fear of AIDS in health care workers, namely fear of loss of control, fear of sex, fear of HIV infection through blood and illness, fear of death and medical interventions and fear of contact with out-groups. Fear of loss of control was the primary area of concern in the Nigerian health care workers whereas fear of HIV infection through blood and illness was the most important area of AIDS related feats in United States health care workers. The study also revealed that infection control precautions and practices in Nigeria were based more on normative and social pressures whereas it was based on knowledge of disease transmission, supervision and employee discipline in the United States, and thus stresses the need for focused educational programs in health care settings that emphasize universal precautions at all times and that are sensitive to the cultural nuances of that particular environment. ^

Childhood cancer survivor satisfaction with characteristics of clinical care

This study investigated the characteristics of a clinic that affect how satisfied survivors of childhood cancer are with their medical care. Questionnaire and interview data from the Passport for Care: Texas Implementation project collected between January 2011 to April 2012 were analyzed. Eleven clinics in Texas participated. Questionnaire respondents were childhood cancer survivor patients who had been off therapy for at least 2 years, or their parents. Interview respondents were clinical providers or research staff at the participating clinics. The outcomes evaluated were answers to a single question on satisfaction with care and a composite Percent Satisfaction Score created from seven other questionnaire items that were correlated (Spearman Rho >0.3) with the question on satisfaction. The following characteristics were also evaluated: sex, age, race, education, and type of cancer. The following clinic indicators were evaluated: type of clinic (general vs. dedicated cancer survivor clinics), number of providers, number of survivors, ratio of survivors/providers, distribution of handouts, distribution of treatment summaries, and use of Children's Oncology Group (COG) guidelines. ^ The only demographic characteristic that affected satisfaction was race. A Kruskal-Wallis test showed a statistically significant difference (Chi-square 6.129, 2 d.f., p = 0.0467). To analyze this further, Wilcoxon Rank Sum test of pairings of the three groups were performed. A Bonferroni correction for multiple testing was applied, with p = 0.017 indicating significance at alpha = 0.05. There was no significant difference between the White and Hispanic groups or between the Hispanic and "Other" groups. For the White and "Other" groups there was a significant difference for the satisfaction item (p = 0.0123) but not for the Percent Satisfaction Score (p = 0.0289). These results suggest that race may influence satisfaction and should be evaluated further in future studies. ^ None of the clinic indicators affected the Percent Satisfaction Score. Going to a clinic that distributed patient information handouts (Wilcoxon Rank Sum p = 0.048) and going to a clinic with >=100 survivors (Wilcoxon Rank Sum p = 0.021) were associated with increased satisfaction. The population of childhood cancer survivors is a growing group of individuals with special health needs. In the future survivors will likely seek medical care in a variety of clinical settings, so it is important to investigate features to improve patient satisfaction with clinical care.^