Lack of Answer Estimation by Fuzzy Control

The problem of the lack of answer in questions of survey is usually dealt with different estimation and classification procedures from the answers to other questions. In this document, the results of applying fuzzy control methods for the vote -one of the variables with bigger lack of answer in opinion polls- are presented.

Practical photovoltaic simulator with a cross tackling control strategy based on the first-hand duty cycle processing

This paper proposes a methodological scheme for the photovoltaic (PV) simulator design. With the advantages of a digital controller system, linear interpolation is proposed for precise fitting with higher computational efficiency. A novel control strategy that directly tackles two different duty cycles is proposed and implemented to achieve a full-range operation including short circuit (SC) and open circuit (OC) conditions. Systematic design procedures for both hardware and algorithm are explained, and a prototype is built. Experimental results confirm an accurate steady state performance under different load conditions, including SC and OC. This low power apparatus can be adopted for PV education and research with a limited budget.

Differential effectiveness of two anxiety induction procedures in youth and older adult populations

In this study, we tested in older and younger adults the efficacy of two well-known procedures to experimentally induce anxiety: a) Velten self-statements combined with music; b) film scenes. We extended the pre-vious findings in this field to the understudied area of mood induction in older adults. Fifty-seven older adults and 94 college students were random-ly assigned to one of the experimental conditions or to a control group. Results indicated that both procedures were effective, according to a series of ANOVAs for several self-report, physiological, and behavioral measures. Likewise, the highest effect sizes were observed for the Velten procedure (g = .81 vs. g = .71), and the effects were significantly higher in younger (g = 1.0 in the Velten condition) than in older adults (g = .62), Q = 4.25, X2(1), p = .0392. Both procedures were effective to induce inducting anxiety in both age groups, especially the Velten procedure in younger adults. Therefore, Velten self-statements combined with music may be very useful anxiety induction procedure for further research in controlled situa-tions of emotions across the life-span.

Development and verification of control and protection strategies in hybrid AC/DC power systems for smart grid applications

Modern power networks incorporate communications and information technology infrastructure into the electrical power system to create a smart grid in terms of control and operation. The smart grid enables real-time communication and control between consumers and utility companies allowing suppliers to optimize energy usage based on price preference and system technical issues. The smart grid design aims to provide overall power system monitoring, create protection and control strategies to maintain system performance, stability and security. This dissertation contributed to the development of a unique and novel smart grid test-bed laboratory with integrated monitoring, protection and control systems. This test-bed was used as a platform to test the smart grid operational ideas developed here. The implementation of this system in the real-time software creates an environment for studying, implementing and verifying novel control and protection schemes developed in this dissertation. Phasor measurement techniques were developed using the available Data Acquisition (DAQ) devices in order to monitor all points in the power system in real time. This provides a practical view of system parameter changes, system abnormal conditions and its stability and security information system. These developments provide valuable measurements for technical power system operators in the energy control centers. Phasor Measurement technology is an excellent solution for improving system planning, operation and energy trading in addition to enabling advanced applications in Wide Area Monitoring, Protection and Control (WAMPAC). Moreover, a virtual protection system was developed and implemented in the smart grid laboratory with integrated functionality for wide area applications. Experiments and procedures were developed in the system in order to detect the system abnormal conditions and apply proper remedies to heal the system. A design for DC microgrid was developed to integrate it to the AC system with appropriate control capability. This system represents realistic hybrid AC/DC microgrids connectivity to the AC side to study the use of such architecture in system operation to help remedy system abnormal conditions. In addition, this dissertation explored the challenges and feasibility of the implementation of real-time system analysis features in order to monitor the system security and stability measures. These indices are measured experimentally during the operation of the developed hybrid AC/DC microgrids. Furthermore, a real-time optimal power flow system was implemented to optimally manage the power sharing between AC generators and DC side resources. A study relating to real-time energy management algorithm in hybrid microgrids was performed to evaluate the effects of using energy storage resources and their use in mitigating heavy load impacts on system stability and operational security.

A deontic analysis of inter -organizational control requirements

This research focuses on the design and verification of inter-organizational controls. Instead of looking at a documentary procedure, which is the flow of documents and data among the parties, the research examines the underlying deontic purpose of the procedure, the so-called deontic process, and identifies control requirements to secure this purpose. The vision of the research is a formal theory for streamlining bureaucracy in business and government procedures. ^ Underpinning most inter-organizational procedures are deontic relations, which are about rights and obligations of the parties. When all parties trust each other, they are willing to fulfill their obligations and honor the counter parties’ rights; thus controls may not be needed. The challenge is in cases where trust may not be assumed. In these cases, the parties need to rely on explicit controls to reduce their exposure to the risk of opportunism. However, at present there is no analytic approach or technique to determine which controls are needed for a given contracting or governance situation. ^ The research proposes a formal method for deriving inter-organizational control requirements based on static analysis of deontic relations and dynamic analysis of deontic changes. The formal method will take a deontic process model of an inter-organizational transaction and certain domain knowledge as inputs to automatically generate control requirements that a documentary procedure needs to satisfy in order to limit fraud potentials. The deliverables of the research include a formal representation namely Deontic Petri Nets that combine multiple modal logics and Petri nets for modeling deontic processes, a set of control principles that represent an initial formal theory on the relationships between deontic processes and documentary procedures, and a working prototype that uses model checking technique to identify fraud potentials in a deontic process and generate control requirements to limit them. Fourteen scenarios of two well-known international payment procedures—cash in advance and documentary credit—have been used to test the prototype. The results showed that all control requirements stipulated in these procedures could be derived automatically.^

A Deontic Analysis of Inter-Organizational Control Requirements

This research focuses on the design and verification of inter-organizational controls. Instead of looking at a documentary procedure, which is the flow of documents and data among the parties, the research examines the underlying deontic purpose of the procedure, the so-called deontic process, and identifies control requirements to secure this purpose. The vision of the research is a formal theory for streamlining bureaucracy in business and government procedures. Underpinning most inter-organizational procedures are deontic relations, which are about rights and obligations of the parties. When all parties trust each other, they are willing to fulfill their obligations and honor the counter parties’ rights; thus controls may not be needed. The challenge is in cases where trust may not be assumed. In these cases, the parties need to rely on explicit controls to reduce their exposure to the risk of opportunism. However, at present there is no analytic approach or technique to determine which controls are needed for a given contracting or governance situation. The research proposes a formal method for deriving inter-organizational control requirements based on static analysis of deontic relations and dynamic analysis of deontic changes. The formal method will take a deontic process model of an inter-organizational transaction and certain domain knowledge as inputs to automatically generate control requirements that a documentary procedure needs to satisfy in order to limit fraud potentials. The deliverables of the research include a formal representation namely Deontic Petri Nets that combine multiple modal logics and Petri nets for modeling deontic processes, a set of control principles that represent an initial formal theory on the relationships between deontic processes and documentary procedures, and a working prototype that uses model checking technique to identify fraud potentials in a deontic process and generate control requirements to limit them. Fourteen scenarios of two well-known international payment procedures -- cash in advance and documentary credit -- have been used to test the prototype. The results showed that all control requirements stipulated in these procedures could be derived automatically.

An Automated Surveillance Strategy to Identify Infectious Complications After Cardiac Implantable Electronic Device Procedures.

Background.  The optimum approach for infectious complication surveillance for cardiac implantable electronic device (CIED) procedures is unclear. We created an automated surveillance tool for infectious complications after CIED procedures. Methods.  Adults having CIED procedures between January 1, 2005 and December 31, 2011 at Duke University Hospital were identified retrospectively using International Classification of Diseases, 9th revision (ICD-9) procedure codes. Potential infections were identified with combinations of ICD-9 diagnosis codes and microbiology data for 365 days postprocedure. All microbiology-identified and a subset of ICD-9 code-identified possible cases, as well as a subset of procedures without microbiology or ICD-9 codes, were reviewed. Test performance characteristics for specific queries were calculated. Results.  Overall, 6097 patients had 7137 procedures. Of these, 1686 procedures with potential infectious complications were identified: 174 by both ICD-9 code and microbiology, 14 only by microbiology, and 1498 only by ICD-9 criteria. We reviewed 558 potential cases, including all 188 microbiology-identified cases, 250 randomly selected ICD-9 cases, and 120 with neither. Overall, 65 unique infections were identified, including 5 of 250 reviewed cases identified only by ICD-9 codes. Queries that included microbiology data and ICD-9 code 996.61 had good overall test performance, with sensitivities of approximately 90% and specificities of approximately 80%. Queries with ICD-9 codes alone had poor specificity. Extrapolation of reviewed infectious rates to nonreviewed cases yields an estimated rate of infection of 1.3%. Conclusions.  Electronic queries with combinations of ICD-9 codes and microbiologic data can be created and have good test performance characteristics for identifying likely infectious complications of CIED procedures.

A Minor Change?: A Case Study of Carleton Place's Integration of Minor Variance Procedures into Ontario's Development Permit System

The Development Permit System has been introduce with minimal directives for establishing a decision making process. This is in opposition to the long established process for minor variances and suggests that the Development Permit System does not necessarily incorporate all of Ontario’s fundamental planning principles. From this concept, the study aimed to identify how minor variances are incorporated into the Development Permit System. In order to examine this topic, the research was based around the following research questions: • How are ‘minor variance’ applications processed within the DPS? • To what extent do the four tests of a minor variance influence the outcomes of lower level applications in the DPS approval process? A case study approach was used for this research. The single-case design employed both qualitative and quantitative research methods including a review of academic literature, court cases, and official documents, as well as a content analysis of Class 1, 1A, and 2 Development Permit application files from the Town of Carleton Place that were decided between 2011 and 2015. Upon the completion of the content analysis, it was found that minor variance issues were most commonly assigned to Class 1 applications. Planning staff generally met approval timelines and embraced their delegated approval authority, readily attaching conditions to applications in order to mitigate off-site impacts. While staff met the regulatory requirements of the DPS, ‘minor variance’ applications were largely decided on impact alone, demonstrating that the principles established by the four tests, the defining quality of the minor variance approval process, had not transferred to the Development Permit System. Alternatively, there was some evidence that the development community has not fully adjusted to the requirements of the new approvals process, as some applications were supported using a rationale containing the four tests. Subsequently, a set of four recommendations were offered which reflect the main themes established by the findings. The first two recommendations are directed towards the Province, the third to municipalities and the fourth to developers and planning consultants: 1) Amend Ontario Regulation 608/06 so that provisions under Section 4(3)(e) fall under Section 4(2). 2) Change the rhetoric from “combining elements of minor variances” to “replacing minor variances”. 3) Establish clear evaluation criteria. 4) Understand the evaluative criteria of the municipality in which you are working.

Inhibitory Control is a Rate-Limiting Factor to Preschoolers' Use of Irregular Inflection

We investigated whether children’s inhibitory control is associated with their ability to produce irregular verb forms as well as learn from corrective feedback following their use of an over-regularized form. Forty-eight 3.5 to 4.5 year old children were tested on the irregular past tense and provided with adult corrective input via models of correct use or recasts of errors following ungrammatical responses. Inhibitory control was assessed with a three-item battery of tasks that required suppressing a prepotent response in favor of a non-canonical one. Results showed that inhibitory control was predictive of children’s initial production of irregular forms and not associated with their post-feedback production of irregulars. These findings show that children’s executive functioning skills may be a rate-limiting factor on their ability to produce correct forms, but might not interact with their ability to learn from input in this domain. Findings are discussed in terms of current theories of past-tense acquisition and learning from input more broadly.

BIDIRECTIONAL AC-DC CONVERTERS USING ONE CYCLE CONTROL (OCC) FOR ELECTRIC VEHICLES

The electric vehicle (EV) market has seen a rapid growth in the recent past. With an increase in the number of electric vehicles on road, there is an increase in the number of high capacity battery banks interfacing the grid. The battery bank of an EV, besides being the fuel tank, is also a huge energy storage unit. Presently, it is used only when the vehicle is being driven and remains idle for rest of the time, rendering it underutilized. Whereas on the other hand, there is a need of large energy storage units in the grid to filter out the fluctuations of supply and demand during a day. EVs can help bridge this gap. The EV battery bank can be used to store the excess energy from the grid to vehicle (G2V) or supply stored energy from the vehicle to grid (V2G ), when required. To let power flow happen, in both directions, a bidirectional AC-DC converter is required. This thesis concentrates on the bidirectional AC-DC converters which have a control on power flow in all four quadrants for the application of EV battery interfacing with the grid. This thesis presents a bidirectional interleaved full bridge converter topology. This helps in increasing the power processing and current handling capability of the converter which makes it suitable for the purpose of EVs. Further, the benefit of using the interleaved topology is that it increases the power density of the converter. This ensures optimization of space usage with the same power handling capacity. The proposed interleaved converter consists of two full bridges. The corresponding gate pulses of each switch, in one cell, are phase shifted by 180 degrees from those of the other cell. The proposed converter control is based on the one-cycle controller. To meet the challenge of new requirements of reactive power handling capabilities for grid connected converters, posed by the utilities, the controller is modified to make it suitable to process the reactive power. A fictitious current derived from the grid voltage is introduced in the controller, which controls the converter performance. The current references are generated using the second order generalized integrators (SOGI) and phase locked loop (PLL). A digital implementation of the proposed control ii scheme is developed and implemented using DSP hardware. The simulated and experimental results, based on the converter topology and control technique discussed here, are presented to show the performance of the proposed theory.

Distributed Extremum-Seeking Control with Applications to High-Altitude Balloons

The real-time optimization of large-scale systems is a difficult problem due to the need for complex models involving uncertain parameters and the high computational cost of solving such problems by a decentralized approach. Extremum-seeking control (ESC) is a model-free real-time optimization technique which can estimate unknown parameters and can optimize nonlinear time-varying systems using only a measurement of the cost function to be minimized. In this thesis, we develop a distributed version of extremum-seeking control which allows large-scale systems to be optimized without models and with minimal computing power. First, we develop a continuous-time distributed extremum-seeking controller. It has three main components: consensus, parameter estimation, and optimization. The consensus provides each local controller with an estimate of the cost to be minimized, allowing them to coordinate their actions. Using this cost estimate, parameters for a local input-output model are estimated, and the cost is minimized by following a gradient descent based on the estimate of the gradient. Next, a similar distributed extremum-seeking controller is developed in discrete-time. Finally, we consider an interesting application of distributed ESC: formation control of high-altitude balloons for high-speed wireless internet. These balloons must be steered into a favourable formation where they are spread out over the Earth and provide coverage to the entire planet. Distributed ESC is applied to this problem, and is shown to be effective for a system of 1200 ballons subjected to realistic wind currents. The approach does not require a wind model and uses a cost function based on a Voronoi partition of the sphere. Distributed ESC is able to steer balloons from a few initial launch sites into a formation which provides coverage to the entire Earth and can maintain a similar formation as the balloons move with the wind around the Earth.

Digital geometric-sequence control technique for bidirectional dual active bridge DC-DC converters used in future electric vehicles

Bidirectional DC-DC converters are widely used in different applications such as energy storage systems, Electric Vehicles (EVs), UPS, etc. In particular, future EVs require bidirectional power flow in order to integrate energy storage units into smart grids. These bidirectional power converters provide Grid to Vehicle (V2G)/ Vehicle to Grid (G2V) power flow capability for future EVs. Generally, there are two control loops used for bidirectional DC-DC converters: The inner current loop and The outer loop. The control of DAB converters used in EVs are proved to be challenging due to the wide range of operating conditions and non-linear behavior of the converter. In this thesis, the precise mathematical model of the converter is derived and non-linear control schemes are proposed for the control system of bidirectional DC-DC converters based on the derived model. The proposed inner current control technique is developed based on a novel Geometric-Sequence Control (GSC) approach. The proposed control technique offers significantly improved performance as compared to one for conventional control approaches. The proposed technique utilizes a simple control algorithm which saves on the computational resources. Therefore, it has higher reliability, which is essential in this application. Although, the proposed control technique is based on the mathematical model of the converter, its robustness against parameter uncertainties is proven. Three different control modes for charging the traction batteries in EVs are investigated in this thesis: the voltage mode control, the current mode control, and the power mode control. The outer loop control is determined by each of the three control modes. The structure of the outer control loop provides the current reference for the inner current loop. Comprehensive computer simulations have been conducted in order to evaluate the performance of the proposed control methods. In addition, the proposed control have been verified on a 3.3 kW experimental prototype. Simulation and experimental results show the superior performance of the proposed control techniques over the conventional ones.

Intervención cognitivo-conductual para el control de ansiedad ante la biopsia insicional en pacientes con cáncer de mama

Oncological patients are submitted to invasive exams in order to obtain an accurate diagnosis; these procedures may cause maladaptative reactions (fear, anxiety and pain). Particularly in breast cancer, the most common diagnose technique is the incisional biopsy. Most of the patients are unaware about the procedure and for that reason they may focus their thoughts on possible events such as pain, bleeding, the anesthesia, or the later surgical wound care. Anxiety and pain may provoke physiological, behavioral and emotional complications, and because of this reason, the Behavioral Medicine trained psychologist takes an active role before and after the biopsy. The aim of this study was to evaluate the effect of a cognitive-behavioral program to reduce anxiety in women submitted to incisional biopsy for the first time. There were 10 participants from the Hospital Juárez de México, Oncology service; all of them were treated as external patients. The intervention program focused in psycho-education and passive relaxation training using videos, tape-recorded instructions and pamphlets. Anxiety measures were performed using the IDARE-State inventory, and a visual-analogue scale of anxiety (EEF-A), and the measurement of blood pressure and heart rate). Data were analyzed both intrasubject and intersubject using the Wilcoxon test (p≤0.05). The results show a reduction in anxiety (as in punctuation as in ranges) besides, a reduction in the EEF-A.

Toward A Reliable Quality Control Test For Microneedle Insertion

Microneedles (MNs) are emerging devices that can be used for the delivery of drugs at specific locations1. Their performance is primarily judged by different features and the penetration through tissue is one of the most important aspects to evaluate. For detailed studies of MN performance different kind of in-vitro, exvivo and in-vivo tests should be performed. The main limitation of some of these tests is that biological tissue is too heterogeneous, unstable and difficult to obtain. In addition the use of biological materials sometimes present legal issues. There are many studies dealing with artificial membranes for drug diffusion2, but studies of artificial membranes for Microneedle mechanical characterization are scarce3. In order to overcome these limitations we have developed tests using synthetic polymeric membranes instead of biological tissue. The selected artificial membrane is homogeneous, stable, and readily available. This material is mainly composed of a roughly equal blend of a hydrocarbon wax and a polyolefin and it is commercially available under the brand name Parafilm®. The insertion of different kind of MN arrays prepared from crosslinked polymers were performed using this membrane and correlated with the insertion of the MN arrays in ex-vivo neonatal porcine skin. The insertion depth of the MNs was evaluated using Optical coherence tomography (OCT). The implementation of MN transdermal patches in the market can be improved by make this product user-friendly and easy to use. Therefore, manual insertion is preferred to other kind of procedures. Consequently, the insertion studies were performed in neonatal porcine skin and the artificial membrane using a manual insertion force applied by human volunteers. The insertion studies using manual forces correlated very well with the same studies performed with a Texture Analyzer equipment. These synthetic membranes seem to mimic closely the mechanical properties of the skin for the insertion of MNs using different methods of insertion. In conclusion, this artificial membrane substrate offers a valid alternative to biological tissue for the testing of MN insertion and can be a good candidate for developing a reliable quality control MN insertion test.

Internal Control application : Empirical evidence from Sweden

Aim The aim of this study is to explore based on internationally recognised frameworks: 1. how internal control structures are applied in Sweden among different sectors; 2. how organizational size and environment affect internal control structures; and 3. the impact of internal control structures on organizational performance. Methods A quantitative method was used in the data collection and analysis. The sample consisted of 1117 organizations operating in Sweden. A mean analysis was conducted to measure the level of internal control structures among different industries, organizational sizes, and different choices of listing in the stock exchange market. Person’s correlation analysis was then used to explore possible correlations between external environmental factors and internal control structures, and internal control structures and organizational performance. Lastly, a structural model was built to measure the impact of internal control structures on organizational performance. The measurements of internal control structures and organizational performance are based on COSO framework’s principles and objectives. Results This study gives an insight on how internal control structures are applied across industrial sectors in Sweden, with financial institutions and manufacturing organizations having notably higher levels of internal control structures. Additionally, it provides evidence of the impact external environmental factors have on internal control structures. Furthermore, it shows that organizations that are listed in the Swedish stock exchange market have an equivalent level of internal control structures to those registered in the American stock exchange market. In contrast, organisations that are not listed in the stock exchange market have a notably lower level of internal control structures. Lastly, it illustrates the positive impact the presence of internal control structures has on organizational performance. 3 | P a g e Conclusion The results highlight a crucial role the supervisory authority Finansinspektionen (FI) has in regulating the Swedish financial market. They also show that the stability of the Swedish business environment has had a positive impact on the level of internal control structures.