Sinterização flash do condutor catiônico beta-alumina sintetizada pelo método dos precursores poliméricos.

A beta-alumina de sódio é uma cerâmica condutora de íons Na+ utilizada como eletrólito sólido em baterias de sódio para armazenamento de energias intermitentes como energia solar e eólica. Devido ao alto teor de sódio, esse material é instável a altas temperaturas, podendo sofrer variações de composição durante a etapa de sinterização convencional que utiliza altas temperaturas por longos períodos de tempo. A sinterização flash é uma técnica de sinterização ativada por corrente elétrica que proporciona a densificação de compactos cerâmicos em poucos segundos, a temperaturas notavelmente mais baixas que as convencionais. Uma vez obrigatória a passagem de corrente elétrica através da amostra, a sinterização flash de qualquer material condutor parece bastante razoável. Não obstante, até o presente momento a maioria dos trabalhos publicados sobre o assunto aborda apenas condutores de vacância de oxigênio ou semicondutores, materiais compatíveis com eletrodos de platina (Pt). Nesse trabalho a sinterização flash de um condutor catiônico foi estudada utilizando-se a beta-alumina como material modelo. A beta-alumina foi sintetizada pelo método dos precursores poliméricos, caracterizada e então submetida à sinterização flash. O material de eletrodo padrão (platina) provou ser um eletrodo bloqueador em contato com a beta-alumina. O sucesso da sinterização flash foi determinado pela troca do material de eletrodo por prata (Ag), o que possibilitou uma reação eletroquímica reversível nas interfaces eletrodo-cerâmica e possibilitou a obtenção de um material densificado com morfologia e composição química homogêneas. Devido à metaestabilidade da beta-alumina, a atmosfera dos experimentos precisou ser alterada para manter a integridade desse material rico em um metal alcalino (Na+). A sinterização flash de um condutor catiônico é apresentada pela primeira vez na literatura e ressalta a importância da reação de eletrodo, que é um fator limitante para o sucesso da sinterização flash e precisa ser estudada e adaptada para cada tipo de material.

Filmes de óxido de zinco e nitreto de zinco depositados por magnetron sputtering com diferentes pressões de argônio, oxigênio e nitrogênio.

O óxido de zinco é um material semicondutor que apresenta alta transparência óptica no espectro visível, alta energia de ligação de éxcitons e piezoeletricidade. Por suas propriedades, ele é utilizado na área de sensores, eletrodos transparentes e dispositivos optoeletrônicos. No entanto, sua utilização ainda é limitada pela dificuldade de obtenção de condutividade tipo p, cujo principal dopante é o nitrogênio, devido à assimetria de dopagem ocasionada por defeitos intrínsecos do material, dopagem em valências diferentes das esperadas e formação de níveis de aceitadores profundos na banda proibida. A aplicação em dispositivos piezoelétricos também exige alta resistividade e ótimas propriedades cristalinas. Muitos processos de deposição estabelecidos hoje ainda utilizam altas temperaturas, o que impede sua deposição sobre superfícies ou substratos sensíveis a altas temperaturas. O objetivo deste trabalho é desenvolver técnicas de deposição de filmes de ZnO, principalmente em baixas temperaturas ( 100°C), pelo método de magnetron sputtering de rádio frequência, para avaliar a influência dos gases de processo nas características estruturais, estequiométricas, elétricas e ópticas dos filmes. Para isso, foram obtidos filmes utilizando pressão total de argônio, e pressões parciais de argônio e oxigênio e argônio e nitrogênio, utilizando alvo cerâmico de óxido de zinco ou alvo metálico de zinco. Para alvo de ZnO, filmes com condutividade tipo n foram obtidos em ambiente de argônio, em condições que geraram deficiências de oxigênio. Filmes altamente resistivos foram obtidos com a utilização de pressão parcial de oxigênio no gás de processo, em condições que resultaram em filmes estequiométricos, inclusive com condutividade tipo p. Condutividade tipo p mais alta foi observada, apenas por ponta quente, para uma amostra obtida em argônio logo após a utilização de nitrogênio na câmara de processo, que provavelmente sofreu influência da dopagem não intencional do cobre, que foi identificado como um contaminante do processo devido à estrutura da câmara. Para alvo de Zn, observou-se a formação de nitreto de zinco, que demonstrou alta capacidade de oxidação em ambiente atmosférico, e portanto, transforma-se naturalmente ao longo do tempo ou por processos de oxidação térmica em ZnO dopado com nitrogênio. Filmes de ZnO produzidos a partir de nitreto de zinco foram os únicos dos testados que apresentaram fotoluminescência característica do ZnO, mesmo para processos onde não houve aquecimento intencional.

Estudio de la influencia de la temperatura en las propiedades físicas y mecánicas de la calcarenita de San Julián

En este trabajo se muestran los resultados de una serie de ensayos de laboratorio realizados para estudiar el efecto de las altas temperaturas en las propiedades físicas y mecánicas de una calcarenita muy usada como material de construcción en edificios y monumentos históricos de la ciudad de Alicante. El objetivo es evaluar el daño térmico producido en el material al exponerlo a diferentes temperaturas y la influencia de los diferentes procesos de enfriamiento (al aire y por inmersión en agua), así como la viabilidad del diagnóstico del daño mediante métodos no destructivos (ultrasonidos). Se han utilizado probetas cilíndricas extraídas de bloques de roca sobre las que se han realizado ensayos de caracterización del material intacto obteniendo la porosidad, velocidades de propagación de las ondas P y S, módulos dinámicos y estáticos y resistencia a compresión uniaxial. El calentamiento se ha efectuado en horno eléctrico a temperaturas de entre 105 y 600ºC, en intervalos de 100ºC. Para cada temperatura (excepto 105 ºC) se han calentado diez probetas, enfriándolas posteriormente mediante dos procesos diferentes, obteniendo datos de un total de 55 probetas sometidas a diferentes condiciones de temperatura y método de enfriamiento. Finalmente, se han determinado de nuevo las propiedades de las probetas tras su calentamiento, comparando y correlacionando las diferentes variables. Las conclusiones principales destacan un acusado descenso de los valores de las propiedades medidas con la temperatura (excepto la porosidad que aumenta). Este descenso se acelera notablemente con enfriamiento por agua. Los ensayos no destructivos detectan el deterioro producido en el proceso de igual forma que los destructivos.

Propiedades físicas y mecánicas de una calcarenita: la Piedra de San Julián

En este trabajo se estudian las características físico-mecánicas de la Piedra de San Julián y su comportamiento frente a procesos de calentamiento a temperaturas similares a las alcanzadas en un incendio, así como la puesta a punto y validación de métodos dinámicos no destructivos para el dictamen del estado de desgaste del material. El enfoque está orientado a los parámetros que más interesan en la utilización de la Piedra como material de construcción. Dado que esta Tesis se realiza por compendio de artículos, por razones prácticas y necesidades de publicación, el contenido de la misma está dividido en tres grandes bloques, como son: fluencia, exposición a altas temperaturas y relación entre módulos estáticos y dinámicos. Para el estudio de la fluencia o deformabilidad a largo plazo bajo carga constante se han realizado ensayos de carga estáticos de larga duración. Por otra parte, se ha efectuado un análisis del comportamiento reológico del hormigón en las distintas normativas, especialmente en el Código Modelo FIB (2010), y se ha buscado un paralelismo entre las previsiones del Código y los resultados obtenidos en los ensayos. Al mismo tiempo se han probado varios modelos reológicos que reproduzcan de forma precisa el comportamiento de la fluencia según el Código y los ensayos. Esto ha permitido ajustar una función, adaptando las especificaciones del Código modelo, que describe la deformación en el tiempo de la Piedra de San Julián. La validez teórica de esta ecuación alcanza períodos temporales similares a los existentes para los ensayos realizados con hormigón. El modelo reológico que se ha obtenido por ajuste de todo el período anterior, consta de cuatro celdas de Kelvin y predice igualmente la deformación por fluencia de la roca. La correcta evaluación de las deformaciones a largo plazo es necesaria siempre que se estudie la intervención en edificaciones históricas, bien sea variando la distribución de cargas, o simplemente realizando obras de mantenimiento de cierto calado. La influencia de la temperatura alcanzada y del proceso de enfriamiento utilizado, se ha analizado sobre 55 muestras de roca calentando a temperaturas de hasta 600 ºC y enfriando por dos métodos: al aire y mediante inmersión en agua, ambas a temperatura ambiente. Los parámetros controlados antes y después del proceso térmico han sido: porosidades abierta y total velocidad de propagación de ondas ultrasónicas, módulo de elasticidad, coeficiente de Poisson, resistencia a compresión uniaxial (UCS) y durabilidad según el ensayo de sequedad, humedad y desmoronamiento, Slake Durability Test (SDT). Como conclusiones más notables cabe destacar: la UCS disminuye en un 35% y en un 5O% según el enfriamiento se haya realizado al aire o por inmersión, mientras que el módulo de elasticidad se reduce entre un 75% y un 80%. Las conclusiones obtenidas son importantes para la determinación del daño estructural producido en un incendio, así como para evaluar la influencia del método de extinción. Por otra parte, pueden servir para estimar indirectamente la temperatura máxima alcanzada en un incendio, de cara a la determinación de los posibles efectos sobre otros elementos constructivos. Para la relación entre módulos estáticos y dinámicos se han estudiado 24 muestras con diferentes grados de deterioro. Con los datos obtenidos en los ensayos se han analizado estadísticamente quince modelos de relación con diferentes combinaciones de variables, y se ha construido la correspondiente matriz de correlación. El coeficiente de determinación más alto corresponde a una relación lineal entre ambos módulos. La determinación del módulo de elasticidad por medios no destructivos y de fácil implementación es muy útil cuando se trata de dictaminar sobre el envejecimiento de un material estructural de este tipo. El valor del módulo con respecto al de la roca intacta es un indicador de las características resistentes y grado de debilitamiento del material. Sin embargo, el módulo bajo cargas gravitatorias -estáticas- difiere en general del obtenido dinámicamente, de una manera diferente según el material que se analice. Aquí se ha obtenido una expresión, que correlaciona con un alto valor del coeficiente de determinación ambos módulos, para la roca estudiada. Los parámetros, relaciones y modelos estudiados y propuestos en esta tesis, suponen un importante avance científico de gran utilidad para la conservación y restauración del patrimonio de edificios y otras obras de carácter histórico-cultural construidas con la Piedra de San Julián. Asimismo, las conclusiones obtenidas y los medios y métodos empleados podrán ser extrapolados a otros materiales similares con las adaptaciones oportunas.

Propriedades mecânicas residuais de betões para reabilitação de estruturas após incêndio

O betão, por norma, tem um bom comportamento quando submetido a temperaturas elevadas como as decorrentes dum incêndio. Contudo as suas propriedades mecânicas a altas temperaturas e residuais após incêndio sofrem deterioração podendo, em situação extrema, levar ao colapso, parcial ou total do edifício. Tal redução verifica-se quer no betão normal quer no betão de alta resistência. Nesta comunicação são apresentadas as alterações provocadas pela temperatura nas propriedades mecânicas residuais após incêndio dos betões - resistência à compressão, resistência à tração, resistência à flexão e módulo de elasticidade - obtidas em ensaios experimentais com betão normal e comparadas com os resultados existentes na literatura da especialidade para betão normal e de betão de alta resistência.

Avaliação da influência de cinza da casca de arroz em cimentos para poços de petróleo submetidos à injeção de vapor

Reservoirs that present highly viscous oils require methods to aid in their recovery to the surface. The elev ated oil viscosity hinders its flow through porous media and conventional recovery methods have not obtained significant efficiency. As such, the injection of steam into the reservoir through an injection well has been the most widely used method of therma l recovery, for it allows elevated volumes of recovery due to the viscosity reduction of the oil, facilitating the oil’s mobility within the rock formation and consequently into the production well where it will be exploited. On the other hand, the injecti on of vapor not only affects the fluids found in the rock pores, but the entire structure that composes the well where it is injected due to the high temperatures used in the process. This temperature increment is conducted to the cement, found in the annu lus, responsible for the isolation of the well and the well casing. Temperatures above 110 ̊C create new fazes rich in calcium in the cement matrix, resulting in the reduction of its permeability and the consequential phenomenon of mechanical resistance ret rogression. These alterations generate faults in the cement, reducing the well’s hydraulic isolation, creating insecurity in the operations in which the well will be submitted as well as the reduction of its economic life span. As a way of reducing this re trograde effect, this study has the objective of evaluating the incorporation of rice husk ash as a mineral additive substitute of silica flour , commercially utilized as a source of silica to reduce the CaO/SiO 2 ratio in the cement pastes submitted to high temperatures in thermal recovery. Cement pastes were formulated containing 20 and 30% levels of ash, apart from the basic paste (water + cement) and a reference paste (water + cement + 40% silica flour) for comparison purposes. The tests were executed th rough compression resistance tests, X - Ray diffraction (XRD) techniques, thermogravimetry (TG), scanning electron microscopy (SEM) and chemical anal ysis BY X - ray fluorescence (EDS) on the pastes submitted to cure at low temperatures (45 ̊C) for 28 days following a cure at 280 ̊C and a pressure of 2,000 PSI for 3 days, simulating vapor injection. The results obtained show that the paste containing 30% r ice shell ash is satisfactory, obtaining mechanical resistance desired and equivalent to that of the paste containing 40% silica flour, since the products obtained were hydrated with low CaO/SiO 2 ratio, like the Tobermorita and Xonotlita fases, proving its applicability in well subject to vapor injection.

Estudo sobre tratamento térmico e mudança superficial da diatomita de Punaú/RN para o desenvolvimento de um auxiliar de filtração

The diatomite is a natural material that has numerous applications due to changes in their physical and chemical properties after processing. It is currently used in the industry as a sound insulator , filter aid and industrial load . The filter material shall be inert chemical composition , which will diatomite confers a high commercial value and performance not found in other particulate materials , for this application. The diatomite surface undergoes changes after thermal treatment at high temperatures , from 800ºC , with properties that enable its application in the food , beverage , pharmaceutical , cosmetic and textiles . In this work , we developed a study on thermal treatment on natural diatomite to adapt their properties to the application as a filter aid . The heat treatments were performed in an open oven at temperatures of 800ºC , 1000ºC and 1200ºC for a time of 24 hours. Reagents were added in the constitution of the samples analyzed. The reagents used were sodium carbonate (Na2CO3 ) and sodium chloride (NaCl) . The samples were characterized by x - ray diffraction , x -ray fluorescence , scanning electron microscopy , analysis and particle size distribution , specific surface area by the BET method , and pore volume by BJH method. The results showed a reduction in porosity of the material as well as a significant increase in specific surface area after heat treatment and the reactants in the ratio of 3 wt%. The diatomaceous earth , after heat treatment , undergone changes in its coloration , varying in white, cream and beige , which directly interferes with the speed of filtration materials process. All results obtained before and after heat treatment of the material with the values obtained for samples already used industrially , Brazilian and American industry , which were characterized using the same test methods performed with the samples in the study were compared and showed promising efficiency when material studied in the region of Punaú - RN , after processing , reagent addition and heat treatment, as an element in the composition of filter .

Estudo do balanço de umidade por meio de modelos regionais para o clima do passado e do futuro sobre a América do Sul

In the context of climate change over South America (SA) has been observed that the combination of high temperatures and rain more temperatures less rainfall, cause different impacts such as extreme precipitation events, favorable conditions for fires and droughts. As a result, these regions face growing threat of water shortage, local or generalized. Thus, the water availability in Brazil depends largely on the weather and its variations in different time scales. In this sense, the main objective of this research is to study the moisture budget through regional climate models (RCM) from Project Regional Climate Change Assessments for La Plata Basin (CLARIS-LPB) and combine these RCM through two statistical techniques in an attempt to improve prediction on three areas of AS: Amazon (AMZ), Northeast Brazil (NEB) and the Plata Basin (LPB) in past climates (1961-1990) and future (2071-2100). The moisture transport on AS was investigated through the moisture fluxes vertically integrated. The main results showed that the average fluxes of water vapor in the tropics (AMZ and NEB) are higher across the eastern and northern edges, thus indicating that the contributions of the trade winds of the North Atlantic and South are equally important for the entry moisture during the months of JJA and DJF. This configuration was observed in all the models and climates. In comparison climates, it was found that the convergence of the flow of moisture in the past weather was smaller in the future in various regions and seasons. Similarly, the majority of the SPC simulates the future climate, reduced precipitation in tropical regions (AMZ and NEB), and an increase in the LPB region. The second phase of this research was to carry out combination of RCM in more accurately predict precipitation, through the multiple regression techniques for components Main (C.RPC) and convex combination (C.EQM), and then analyze and compare combinations of RCM (ensemble). The results indicated that the combination was better in RPC represent precipitation observed in both climates. Since, in addition to showing values be close to those observed, the technique obtained coefficient of correlation of moderate to strong magnitude in almost every month in different climates and regions, also lower dispersion of data (RMSE). A significant advantage of the combination of methods was the ability to capture extreme events (outliers) for the study regions. In general, it was observed that the wet C.EQM captures more extreme, while C.RPC can capture more extreme dry climates and in the three regions studied.

Os impactos na qualidade da água e do solo de um manancial tropical do semiárido devido ao uso e ocupação e evento de seca extrema

Human activities alter soil features, causing the deterioration of its quality. Land use and occupation in drainage basins of water supply reservoirs can change the environmental soil quality and, thus, lead to the expansion of the soil potential of being a diffuse pollution source. In the Brazilian semiarid region, the soils are generally shallow with high susceptibility to erosion, favoring the sediment and nutrients input into the superficial waterbodies, contributing to the eutrophication process. Moreover, this region has high temperatures and high evapotranspiration rates, that are generally higher than the precipitation rates, causing a negative hydric balance and big volume losses by evaporation. The water volume reduction increases the nutrients’ concentration and, therefore, exacerbates the eutrophication process, deteriorating the water quality. Thereby, we hypothesized that the eutrophication process of semiarid reservoirs is intensified both by the extreme climatic events of prolonged drought, and by the diffuse pollution due to the basin land use and occupation. The study aimed to test whether the land use and occupation activities of the basin and the severe drought events intensify the eutrophication process of a semiarid tropical reservoir. To verify the influence of human activities carried out in the water supply of drainage basin on the soil quality and the eutrophication process, we conducted the mapping of the kind of use and occupation, as well the calculation of erosion for each activity and the soil quality evaluation of the riparian zone and water quality of the water supply. For the water analyses, the samplings were carried out monthly in the deeper point, near dam. For the soil, deformed composite samples were taken for the physical and chemical attributes analysis, according to the identified land use and occupation classes. The results showed that extreme droughts drastically reduces the water volume and elevates the nutrients concentration, contributing, thus, to a bigger degradation of water quality. Furthermore, we verified that human activities in the drainage basin promote the diffuse pollution, by increasing the soil susceptibility to erosion and nutrients contents. Summarizing, our results support the investigated hypothesis that activities of land use and occupation and extreme drought generate a combined effect that provide the intensification of eutrophication process of semiarid reservoirs.

Modificação do eletrodo AWS E7018 com adição de filmes finos externos de PVC e Al, para soldagem de aço C-Mn

This paper suggests modifications in coating of electrodes providing an alternative for execution of welding with low hydrogen electrode AWS E7018 without having to dry it, reducing thus the cost and time of manufacturing of high resistance welds. The welds in this research were developed with basic coated electrodes (hygroscopic) – SMAW process – externally painted with aluminum spray paint for high temperatures or wrapped with thin plastic films (PVC) and aluminum foil films used commonly for food protection. The basic premise is that establishing a barrier between the atmosphere and the electrode coating could reduce the effects of high hygroscopicity presented by coatings of low hydrogen, minimizing this way the main source of supply of hydrogen to the fusion pool during welding. It is also expected that the addition of new materials from the electrode coating to the fusion pool would induce metallurgical changes in the deposited metal and, as a consequence, modifications in its mechanical properties. This research dealt with measuring the dissolved hydrogen in the deposited metal after welding with modified electrodes, evaluating the influence of these changes in the produced microstructures and in the mechanical properties of the resulting weld, and comparing the obtained results with the standard welding procedures and with the recently developed waterproof electrodes. The results obtained in most samples welded with modified electrodes showed increased mechanical resistance and increased tenacity due to the increased percentage of acicular ferrite in metal deposited without significant elevation of hardness, when compared with the traditional welding with AWS E7018 electrode and with ELBRÁS BRH4R waterproof electrode. The diffusing hydrogen measured in the modified electrodes was kept inside the parameters defined by international codes.

Modificação do eletrodo AWS E7018 com adição de filmes finos externos de PVC e Al, para soldagem de aço C-Mn

This paper suggests modifications in coating of electrodes providing an alternative for execution of welding with low hydrogen electrode AWS E7018 without having to dry it, reducing thus the cost and time of manufacturing of high resistance welds. The welds in this research were developed with basic coated electrodes (hygroscopic) – SMAW process – externally painted with aluminum spray paint for high temperatures or wrapped with thin plastic films (PVC) and aluminum foil films used commonly for food protection. The basic premise is that establishing a barrier between the atmosphere and the electrode coating could reduce the effects of high hygroscopicity presented by coatings of low hydrogen, minimizing this way the main source of supply of hydrogen to the fusion pool during welding. It is also expected that the addition of new materials from the electrode coating to the fusion pool would induce metallurgical changes in the deposited metal and, as a consequence, modifications in its mechanical properties. This research dealt with measuring the dissolved hydrogen in the deposited metal after welding with modified electrodes, evaluating the influence of these changes in the produced microstructures and in the mechanical properties of the resulting weld, and comparing the obtained results with the standard welding procedures and with the recently developed waterproof electrodes. The results obtained in most samples welded with modified electrodes showed increased mechanical resistance and increased tenacity due to the increased percentage of acicular ferrite in metal deposited without significant elevation of hardness, when compared with the traditional welding with AWS E7018 electrode and with ELBRÁS BRH4R waterproof electrode. The diffusing hydrogen measured in the modified electrodes was kept inside the parameters defined by international codes.

Uma nova proposta de fluidos de perfuração aquosos à base de polímeros vinílicos e bentonita para poços de alta temperatura e pressão

The advance of drilling in deeper wells has required more thermostable materials. The use of synthetic fluids, which usually have a good chemical stability, faces the environmental constraints, besides it usually generate more discharge and require a costly disposal treatment of drilled cuttings, which are often not efficient and require mechanical components that hinder the operation. The adoption of aqueous fluids generally involves the use of chrome lignosulfonate, used as dispersant, which provides stability on rheological properties and fluid loss under high temperatures and pressures (HTHP). However, due to the environmental impact associated with the use of chrome compounds, the drilling industry needs alternatives that maintain the integrity of the property and ensure success of the operation in view of the strong influence of temperature on the viscosity of aqueous fluids and polymers used in these type fluids, often polysaccharides, passives of hydrolysis and biological degradation. Therefore, vinyl polymers were selected for this study because they have predominantly carbon chain and, in particular, polyvinylpyrrolidone (PVP) for resisting higher temperatures and partially hydrolyzed polyacrylamide (PHPA) and clay by increasing the system's viscosity. Moreover, the absence of acetal bonds reduces the sensitivity to attacks by bacteria. In order to develop an aqueous drilling fluid system for HTHP applications using PVP, HPAM and clay, as main constituents, fluid formulations were prepared and determined its rheological properties using rotary viscometer of the Fann, and volume filtrate obtained by filtration HTHP following the standard API 13B-2. The new fluid system using polyvinylpyrrolidone (PVP) with high molar weight had higher viscosities, gels and yield strength, due to the effect of flocculating clay. On the other hand, the low molecular weight PVP contributed to the formation of disperse systems with lower values in the rheological properties and fluid loss. Both systems are characterized by thermal stability gain up to around 120 ° C, keeping stable rheological parameters. The results were further corroborated through linear clay swelling tests.

Uma nova proposta de fluidos de perfuração aquosos à base de polímeros vinílicos e bentonita para poços de alta temperatura e pressão

The advance of drilling in deeper wells has required more thermostable materials. The use of synthetic fluids, which usually have a good chemical stability, faces the environmental constraints, besides it usually generate more discharge and require a costly disposal treatment of drilled cuttings, which are often not efficient and require mechanical components that hinder the operation. The adoption of aqueous fluids generally involves the use of chrome lignosulfonate, used as dispersant, which provides stability on rheological properties and fluid loss under high temperatures and pressures (HTHP). However, due to the environmental impact associated with the use of chrome compounds, the drilling industry needs alternatives that maintain the integrity of the property and ensure success of the operation in view of the strong influence of temperature on the viscosity of aqueous fluids and polymers used in these type fluids, often polysaccharides, passives of hydrolysis and biological degradation. Therefore, vinyl polymers were selected for this study because they have predominantly carbon chain and, in particular, polyvinylpyrrolidone (PVP) for resisting higher temperatures and partially hydrolyzed polyacrylamide (PHPA) and clay by increasing the system's viscosity. Moreover, the absence of acetal bonds reduces the sensitivity to attacks by bacteria. In order to develop an aqueous drilling fluid system for HTHP applications using PVP, HPAM and clay, as main constituents, fluid formulations were prepared and determined its rheological properties using rotary viscometer of the Fann, and volume filtrate obtained by filtration HTHP following the standard API 13B-2. The new fluid system using polyvinylpyrrolidone (PVP) with high molar weight had higher viscosities, gels and yield strength, due to the effect of flocculating clay. On the other hand, the low molecular weight PVP contributed to the formation of disperse systems with lower values in the rheological properties and fluid loss. Both systems are characterized by thermal stability gain up to around 120 ° C, keeping stable rheological parameters. The results were further corroborated through linear clay swelling tests.

Pirometamorfismo provocado por intrusões básicas cenozoicas em rochas da Bacia Potiguar, RN: integração de dados geológicos e petrofísicos

The Potiguar Basin is located in the Brazilian Equatorial Margin and presents sedimentary rocks affected by Cenozoic basic igneous intrusions, known as Macau Magmatism. The most prominent effect related to these intrusions is the formation of buchites, pyrometamorphic rocks that occur at very high temperatures and very low pressures in the sanidinite metamorphic facies. Through literature review, field observations, petrographic and petrophysical data, accessing the database of previous studies and results from this research, it was possible to characterize and estimate the effects produced in the thermal aureole of some hypabyssal bodies in the basin. The most relevant features associated with the intrusions are: compactation, hydraulic fracturing, partial melting and recrystallization of country rocks. According to the observed mineral occurrences, temperature of 800 to 1200 °C and pressure below 0,5 kbar were estimated at the contacts of the igneous bodies. The thermal modeling of the São João plug indicates thermal effects extending up to 150 m away from the contact and cooling time of approximately 265,000 years. After the peak of temperature, followed a cooling phase registered by remobilization and precipitation of minerals at low-temperature in faults, fractures and geodes, interpreted as derived from reactions with sedimentary rocks and metasomatic / hydrothermal fluids with abundant carbonatization and silicification.

Pirometamorfismo provocado por intrusões básicas cenozoicas em rochas da Bacia Potiguar, RN: integração de dados geológicos e petrofísicos

The Potiguar Basin is located in the Brazilian Equatorial Margin and presents sedimentary rocks affected by Cenozoic basic igneous intrusions, known as Macau Magmatism. The most prominent effect related to these intrusions is the formation of buchites, pyrometamorphic rocks that occur at very high temperatures and very low pressures in the sanidinite metamorphic facies. Through literature review, field observations, petrographic and petrophysical data, accessing the database of previous studies and results from this research, it was possible to characterize and estimate the effects produced in the thermal aureole of some hypabyssal bodies in the basin. The most relevant features associated with the intrusions are: compactation, hydraulic fracturing, partial melting and recrystallization of country rocks. According to the observed mineral occurrences, temperature of 800 to 1200 °C and pressure below 0,5 kbar were estimated at the contacts of the igneous bodies. The thermal modeling of the São João plug indicates thermal effects extending up to 150 m away from the contact and cooling time of approximately 265,000 years. After the peak of temperature, followed a cooling phase registered by remobilization and precipitation of minerals at low-temperature in faults, fractures and geodes, interpreted as derived from reactions with sedimentary rocks and metasomatic / hydrothermal fluids with abundant carbonatization and silicification.