O processo de urbanização de Mossorò: dos processos históricos à estrutura urbana atual

The general objective of this academic work is to analyze the relationship between the territorial division and the urban expansion process of Mossoró city, understood here as the production and occupation of space. The urban expansion in Mossoró, since its formation as settlement in 1772 until current days, identifies with the Brazilian urbanization process whose growth is determined by the capitalist development. Thus, the expansion was determined by several economical specializations imposed by the territorial division of work which occurs at an interregional level, and, sometimes at an international level. Then, each specialization determined a moment of the urban expansion of the city, as follows: a) The cattle farmer specialization, between 1772 and 1857, when the urban expansion was shy, is summarized to a commercial square that received goods from Aracati aiming to cover a wide rural area; b) The commercial emporium specialization, between 1857 and 1930, when the urban expansion took an important impulse with the concentration of public and private capitals; c) The salt industry and the agricultural-industrial exporter specialization inside a state of development policy, between 1930 and 1970, when the urban expansion, joined to the settlement of the working class in the urban soil, developed along an important axis -the railway; d) The render of services specialization inside a state of intervention policy, between 1970 and 1990, when the urban expansion was characterized by the accelerated growth rhythm, by the reuse of some spaces, and by space segregation of demanding people; e) The render of services policy inside a neoliberal state policy, since 1990 until current days, when the urban expansion reduced its rhythm abruptly, when only small alterations occurred in the existing spaces. It focused on social policies and on several slums eradication programs. Finally, the territorial structure is deeply articulated with others, no territorial, but economical, social and political, which happens at a national, regional and local rate. Only within a historical and conceptual panorama, it was possible to explain the urban expansion in Mossoró from its formation in 1772 until current days. Therefore, this work is a several discipline analysis of the urbanization process existing in Mossoró

Arquiteturas do trigo: espaços de silagem no Alentejo, do século XIX à atualidade

O presente trabalho de investigação apresenta um estudo sistemático da expressão arquitetónica que teve na região do Alentejo a implantação agro-industrial da cultura do trigo, em especial, durante a "Campanha do Trigo", iniciada em 1929 e prosseguida durante o Estado Novo, até 1969. Para tanto, procede ao mapeamento dos elementos edificados, em ligação com os processos de produção, silagem e moagem industrial do trigo, bem como ao seu transporte, estabelecendo uma análise comparativa com outras regiões e países, com o intuito de revelar o impacto destes equipamentos nos diversos territórios e paisagens. Assim, procura-se compreender as relações que se estabeleceram entre a forma arquitetónica do silo (cujo desenho resulta fundamentalmente de uma resposta programática intrinsecamente ligada à sua função primordial - armazenamento do cereal) e os lugares, onde se implantaram e com os quais se procuraram articular, e as paisagens, com as quais perspetivaram dialogar. Para tal, procede-se a descrição do estado atual de cada exemplar das denominadas "arquiteturas do trigo", com o objetivo de gerar, num primeiro nível, o entendimento de cada caso em particular e, posteriormente, estabelecer, por efeito de comparação, um confronto, quer entre os diferentes contextos em que se inserem, quer entre as suas caraterísticas formais, de modo a tirar ilações que possibilitem problematizar o seu uso futuro, equacionando diferentes perspetivas de atuação sobre o edificado. Finalmente procura-se introduzir uma discussão segundo diferentes orientações e posicionamentos, de modo a invocar perspetivas de atuação sobre os silos, que se adequem a cada situação específica, a cada contexto e a cada lugar. É no confronto entre as abordagens enunciadas, que se evidencia, mais do que a pertinência, a emergência social e cultural de uma ação diligente, quer ao nível particular de cada peça silar, quer do sistema, do qual era parte integrante a linha de caminho de ferro, que através do seu traçado permitia interligar todas as peças silares e garantir o seu funcionamento a escala industrial; ABSTRACT: This research presents a systematic study of architectural expression of wheat crop agro-industrial development, in particular the "Wheat Campaign", started in 1929 and continue during the "New State", until 1969. We first proceed to map the built elements related to production processes, silage and wheat industrial grinding, as well as the ways of transportation, establishing a comparative analysis with other countries and regions, in order to reveal the impact of these objects in various territories and landscapes. We seek to understand the relationships between the architectural form of the silo (whose design is mainly a result of an intrinsically programmatic response linked to its primary function - cereal storage) and the places where they are implemented and the landscapes which they sought to communicate and articulate. Secondly, we describe the current status of each copy of the "wheat architectures" in Alentejo, with the main objective of attain, at first, the understanding of each particular case and, then, to establish a connection between the different contexts in which they operate and their formal characteristics, in order to conceive and discuss their future use, equating different perspectives of action in the buildings. Finally seeks to introduce a discussion according to different orientations and positions in order to invoke prospects for action on the grain elevators that are appropriate to each specific situation, every context and every place. It is the clash between the stated approaches, which shows more than the relevance, it shows social and cultural emergence of a diligent action on the particular level of each grain elevator on the system, which was an integral part of the railway, which through its tracing allowed to interconnect all grain elevators and assure its operation on an industrial scale

Evaluating social and environmental impacts at Embrapa.

A strategic planning process has been implemented at the Brazilian Agricultural Research Agency (Embrapa) to introduce sustainable development objectives in all steps of agricultural Research and Development. An essential component of the institutional mission statement hence devised has called for the systematic assessment of social and environmental impacts (in addition to the traditionally studied economic ones) of all technology innovations resulting from R&D. The proposed approach emphasizes the interest of promoting close interaction between R&D teams and technology-adopting producers, under actual field contexts, in order to improve both the technology development and the demand probing processes. Given the multiplicity of technological applications ensuing from Embrapa?s very broad research encompassment, and the variety of environmental and productive contexts involved, a customized impact assessment system has been proposed. Directed at the appraisal of agricultural technology development research projects (ex-ante) as well as their ensuing innovations (ex-post), the Ambitec-Agro System comprises a set of integrated socio-environmental indicators, constructed in modules suited to Agricultural, Animal husbandry, and Agro-industrial activities, besides a specific module for Social Impact Assessment. The system has been routinely applied in technology appraisal in all of Embrapa?s Units, as a basis for their institutional performance evaluations, and toward the formulation of the annual Social Balance Report. Following the inception of this institutional technology appraisal initiative, several methodological innovations have been proposed within Embrapa, including technical improvements and applicability adaptations of the Ambitec-Agro system, and approaches to further-reaching objectives, such as the sustainable development of rural communities, and the environmental management of agricultural activities.

Preventing industrial scale using bauxite refinery residues

An Australian green power (AGP) company produces energy from burning biomass from the sugar industry and recycled wood waste, however alkali in biomass is released into a recirculating stream that forms a scale as it becomes more concentrated. This investigation has shown that the addition of Bayer liquor (alumina waste residue) successfully removes scale-forming species from the recirculating stream and thus has the potential to reduce the rate of scaling. Characterisation of the scale and Bayer precipitates has been performed using X-ray diffraction (XRD), infrared spectroscopy (IR) and inductively coupled plasma optical emission spectroscopy (ICP-OES).

Cultivation of Pleurotus spp. on a combination of anaerobically digested plant material and various agro-residues

Two species of Pleurotus, Pleurotus florida and Pleurotus flabellatus were cultivated on two agro-residues (paddy straw; PS and coir pith; CP) singly as well as in combination with biogas digester residue (BDR, main feed leaf biomass). The biological efficiency, nutritional value, composition and nutrient balance (C, N and P) achieved with these substrates were studied. The most suitable substrate that produced higher yields and biological efficiency was PS mixed with BDR followed by coir pith with BDR. Addition of BDR with agro-residues could increase mushroom yield by 20-30%. The biological efficiency achieved was high for PS + BDR (231.93% for P. florida and 209.92% for P. flabellatus) and for CP + BDR (14831% for P. florida and 188.46% for P. flabellatus). The OC (organic carbon), TKN (nitrogen) and TP (phosphate) removal of the Pleurotus spp. under investigation suggests that PS with BDR is the best substrate for growing mushroom. (C) 2015 Published by Elsevier Inc. on behalf of International Energy Initiative.

Agro-Based Biocomposites for Industrial Applications

Leaf fibers are fibers that run lengthwise through the leaves of most monocotyledonous plants such as pineapple, banana, etc. Pineapple (Ananas comosus) and Banana (Musa indica) are emerging fiber having a very large potential to be used for composite materials. Over 150,000 ha of pineapple and over 100,000 ha of banana plantations are available in Brazil for the fruit production and enormous amount of agricultural waste is produced. This residual waste represents one of the single largest sources of cellulose fibers available at almost no cost. The potential consumers for this fiber are pulp and paper, chemical feedstock, textiles and composites for the automotive, furniture and civil construction industry.

Agro-Based Biocomposites for Industrial Applications

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Manual of practice : the disposal of combined municipal/industrial wastewater residues (metals) /

Mode of access: Internet.

The effect of high concentrations of calcium hydroxide in neutralised synthetic supernatant liquor : implications for alumina refinery residues

The presence of calcium hydroxide (Ca(OH)2) in Bayer residue slurry inhibits the effectiveness of the seawater neutralisation process to reduce the pH and aluminium concentration in the residue. An increase in the slurry pH (reversion), after seawater neutralisation, is caused by the dissolution of calcium hydroxide and hydrocalumite (solid components found in bauxite refinery residue). Reversion was not observed when the final solution pH was greater than 10.5, due to hydrocalumite being in a state of equilibrium at high pH. Hydrocalumite has been found to form during the neutralisation process when high concentrations of calcium hydroxide are present in the residue liquor. The dissolution of hydrocalumite releases hydroxyl (OH-) and aluminium ions back into solution after the seawater neutralisation (SWN) process, which causes pH and aluminium reversion to occur. This investigation looks at the effect of Ca(OH)2 and subsequently hydrocalumite on the pH and aluminium concentration in bauxite refinery residue liquors after the SWN process.

Radioactive residues associated with water treatment, use and disposal in Australia

Water resources are known to contain radioactive materials, either from natural or anthropogenic sources. Treatment, including wastewater treatment, of water for drinking, domestic, agricultural and industrial purposes has the potential to concentrate radioactive materials. Inevitably concentrated radioactive material is discharged to the environment as a waste product, reused for soil conditioning, or perhaps recycled as a new potable water supply. This thesis, presented as a collection of peer reviewed scientific papers, explores a number of water / wastewater treatment applications, and the subsequent nature and potential impact of radioactive residues associated with water exploitation processes. The thesis draws together research outcomes for sites predominantly throughout Queensland, Australia, where it is recognised that there is a paucity of published data on the subject. This thesis contributes to current knowledge on the monitoring, assessment and potential for radiation exposure from radioactive residues associated with the water industry.

Neutralization of acid sulfate solutions using bauxite refinery residues and its derivatives

This investigation has shown that by transforming free caustic in red mud (RM) to Bayer hydrotalcite (during the seawater neutralization (SWN) process) enables a more controlled release mechanism for the neutralization of acid sulfate soils. The formation of hydrotalcite has been confirmed by X-ray diffraction (XRD) and differential thermalgravimetric analysis (DTG), while the dissolution of hydrotalcite and sodalite has been observed through XRD, DTG, pH plots, and ICP-OES. Coupling of all techniques enabled three neutralization mechanisms to be determined: (1) free alkali, (2) hydrotalcite dissolution, and (3) sodalite dissolution. The mechanisms are determined on the basis of ICP-OES and kinetic information. When the mass of RM or SWN-RM is greater than 0.08 g/50 mL, the pH of solution increases to a suitable value for plant life with aluminum leaching kept at a minimum. To obtain a neutralization pH greater than 6 in 10 min, the following ratio of bauxite residue (g) in 50 mL with a known iron sulfate (Fe2(SO4)3) concentration can be determined as follows: 0.04 g:50 mL:0.1 g/L of Fe2(SO4)3.

Mathematical modeling for improved greenhouse gas balances, agro-ecosystems, and policy development: Lessons from the Australian experience

If the land sector is to make significant contributions to mitigating anthropogenic greenhouse gas (GHG) emissions in coming decades, it must do so while concurrently expanding production of food and fiber. In our view, mathematical modeling will be required to provide scientific guidance to meet this challenge. In order to be useful in GHG mitigation policy measures, models must simultaneously meet scientific, software engineering, and human capacity requirements. They can be used to understand GHG fluxes, to evaluate proposed GHG mitigation actions, and to predict and monitor the effects of specific actions; the latter applications require a change in mindset that has parallels with the shift from research modeling to decision support. We compare and contrast 6 agro-ecosystem models (FullCAM, DayCent, DNDC, APSIM, WNMM, and AgMod), chosen because they are used in Australian agriculture and forestry. Underlying structural similarities in the representations of carbon flows though plants and soils in these models are complemented by a diverse range of emphases and approaches to the subprocesses within the agro-ecosystem. None of these agro-ecosystem models handles all land sector GHG fluxes, and considerable model-based uncertainty exists for soil C fluxes and enteric methane emissions. The models also show diverse approaches to the initialisation of model simulations, software implementation, distribution, licensing, and software quality assurance; each of these will differentially affect their usefulness for policy-driven GHG mitigation prediction and monitoring. Specific requirements imposed on the use of models by Australian mitigation policy settings are discussed, and areas for further scientific development of agro-ecosystem models for use in GHG mitigation policy are proposed.

Biomethanation of herbaceous biomass residues using 3-zone plug flow like digesters - A case study from India

Biomethanation of herbaceous biomass feedstock has the potential to provide clean energy source for cooking and other activities in areas where such biomass availability predominates. A biomethanation concept that involves fermentation of biomass residues in three steps, occurring in three zones of the fermentor is described. This approach while attempting take advantage of multistage reactors simplifies the reactor operation and obviates the need for a high degree of process control or complex reactor design. Typical herbaceous biomass decompose with a rapid VFA flux initially (with a tendency to float) followed by a slower decomposition showing balanced process of VFA generation and its utilization by methanogens that colonize biomass slowly. The tendency to float at the initial stages is suppressed by allowing previous days feed to hold it below digester liquid which permits VFA to disperse into the digester liquid without causing process inhibition. This approach has been used to build and operate simple biomass digesters to provide cooking gas in rural areas with weed and agro-residues. With appropriate modifications, the same concept has been used for digesting municipal solid wastes in small towns where large fermentors are not viable. With further modifications this concept has been used for solid-liquid feed fermentors. Methanogen colonized leaf biomass has been used as biofilm support to treat coffee processing wastewater as well as crop litter alternately in a year. During summer it functions as a biomass based biogas plants operating in the three-zone mode while in winter, feeding biomass is suspended and high strength coffee processing wastewater is let into the fermentor achieving over 90% BOD reduction. The early field experience of these fermentors is presented.

Electroleaching of Zinc leach residues

A room-temperature cathodic electrolytic process was developed in the laboratory to recover zinc from industrial leach residues. The various parameters affecting the electroleaching process were studied using a statistically designed experiment. To understand the mechanisms behind the electrode processes, cyclic voltammetry and galvanostatic studies were carried out. The role of Einh measurements in monitoring such an electroleaching procedure is also shown. Since significant amounts of iron were also present in the leach liquor, attempts were made to purify it before zinc recovery by electrowinning. Reductive dissolution and creation of anion vacancies were found to be responsible for the dissolution of zinc ferrite present in the leach residue. A flow sheet of the process is given.