Quantum dynamical characterization of unimolecular resonances

We give a selective review of quantum mechanical methods for calculating and characterizing resonances in small molecular systems, with an emphasis on recent progress in Chebyshev and Lanczos iterative methods. Two archetypal molecular systems are discussed: isolated resonances in HCO, which exhibit regular mode and state specificity, and overlapping resonances in strongly bound HO2, which exhibit irregular and chaotic behavior. Future directions in this field are also discussed.

The development of chromatography for the characterization of protein interactions: a personal perspective

This article reviews the progress of a personal endeavour to develop chromatography as a quantitative procedure for the determination of reaction stoichiometries and equilibrium constants governing protein interactions. As well as affording insight into an aspect of chromatography with which many protein chemists are unfamiliar, it shows the way in which minor adaptations of conventional chromatographic practices have rendered the technique one of the most powerful methods available for the characterization of interactions. That pathway towards quantification is followed from the introduction of frontal gel filtration for the study of protein self-association to the characterization of ligand binding by the biosensor variant of quantitative affinity chromatography.

Neural Electrode Array Based on Aluminum: Fabrication and Characterization

A unique neural electrode design is proposed with 3 mm long shafts made from an aluminum-based substrate. The electrode is composed by 100 individualized shafts in a 10 × 10 matrix, in which each aluminum shafts are precisely machined via dicing-saw cutting programs. The result is a bulk structure of aluminum with 65 ° angle sharp tips. Each electrode tip is covered by an iridium oxide thin film layer (ionic transducer) via pulsed sputtering, that provides a stable and a reversible behavior for recording/stimulation purposes, a 40 mC/cm2 charge capacity and a 145 Ω impedance in a wide frequency range of interest (10 Hz-100 kHz). Because of the non-biocompatibility issue that characterizes aluminum, an anodization process is performed that forms an aluminum oxide layer around the aluminum substrate. The result is a passivation layer fully biocompatible that furthermore, enhances the mechanical properties by increasing the robustness of the electrode. For a successful electrode insertion, a 1.1 N load is required. The resultant electrode is a feasible alternative to silicon-based electrode solutions, avoiding the complexity of its fabrication methods and limitations, and increasing the electrode performance.

Structural characterization and immunogenicity in wildtype and immune tolerant mice of degraded recombinant human interferon alpha2b

Purpose - To study the influence of protein structure on the immunogenicity in wildtype and immune tolerant mice of well-characterized degradation products of recombinant human interferon alpha2b (rhIFNα2b). Methods - RhIFNα2b was degraded by metal catalyzed oxidation (M), crosslinking with glutaraldehyde (G), oxidation with hydrogen peroxide (H) and incubation in a boiling water bath (B). The products were characterized with UV absorption, circular dichroism and fluorescence spectroscopy, gel permeation chromatography, reversed-phase HPLC, SDS-PAGE, Western blotting and mass spectrometry. The immunogenicity of the products was evaluated in wildtype mice and in transgenic mice immune tolerant for hIFNα2. Serum antibodies were detected by ELISA or surface plasmon resonance. Results - M-rhIFNα2b contained covalently aggregated rhIFNα2b with three methionines partly oxidized to methionine sulfoxides. G-rhIFNα2b contained covalent aggregates and did not show changes in secondary structure. H-rhIFNα2b was only chemically changed with four partly oxidized methionines. B-rhIFNα2b was largely unfolded and heavily aggregated. Native (N) rhIFNα2b was immunogenic in the wildtype mice but not in the transgenic mice, showing that the latter were immune tolerant for rhIFNα2b. The antirhIFNα2b antibody levels in the wildtype mice depended on the degradation product: M-rhIFNα2b > H-rhIFNα2b ~ N-rhIFNα2b >> B-rhIFNα2b; G-rhIFNα2b did not induce anti-rhIFNα2b antibodies. In the transgenic mice, only M-rhIFNα2b could break the immune tolerance. Conclusions - RhIFNα2b immunogenicity is related to its structural integrity. Moreover, the immunogenicity of aggregated rhIFNα2b depends on the structure and orientation of the constituent protein molecules and/or on the aggregate size.

Structural characterization and immunogenicity in wild-type and immune tolerant mice of degraded recombinant human interferon Alpha2b

Purpose: This study was conducted to study the influence of protein structure on the immunogenicity in wild-type and immune tolerant mice of well-characterized degradation products of recombinant human interferon alpha2b (rhIFNα2b). Methods: RhIFNα2b was degraded by metal-catalyzed oxidation (M), cross-linking with glutaraldehyde (G), oxidation with hydrogen peroxide (H), and incubation in a boiling water bath (B). The products were characterized with UV absorption, circular dichroism and fluorescence spectroscopy, gel permeation chromatography, reverse-phase high-pressure liquid chromatography, sodium dodecyl sulfate polyacrylamide gel electrophoresis, Western blotting, and mass spectrometry. The immunogenicity of the products was evaluated in wild-type mice and in transgenic mice immune tolerant for hIFNα2. Serum antibodies were detected by enzyme-linked immunosorbent assay or surface plasmon resonance. Results: M-rhIFNα2b contained covalently aggregated rhIFNα2b with three methionines partly oxidized to methionine sulfoxides. G-rhIFNα2b contained covalent aggregates and did not show changes in secondary structure. H-rhIFNα2b was only chemically changed with four partly oxidized methionines. B-rhIFNα2b was largely unfolded and heavily aggregated. Nontreated (N) rhIFNα2b was immunogenic in the wild-type mice but not in the transgenic mice, showing that the latter were immune tolerant for rhIFNα2b. The anti-rhIFNα2b antibody levels in the wild-type mice depended on the degradation product: M-rhIFNα2b > H-rhIFNα2b ∼ N-rhIFNα2b ≫ B-rhIFNα2b; G-rhIFNα2b did not induce anti-rhIFNα2b antibodies. In the transgenic mice, only M-rhIFNα2b could break the immune tolerance. Conclusions: RhIFNα2b immunogenicity is related to its structural integrity. Moreover, the immunogenicity of aggregated rhIFNα2b depends on the structure and orientation of the constituent protein molecules and/or on the aggregate size.

Accessing indoor fungal contamination using conventional and molecular methods in Portuguese poultries

Epidemiological studies showed increased prevalence of respiratory symptoms and adverse changes in pulmonary function parameters in poultry workers, corroborating the increased exposure to risk factors, such as fungal load and their metabolites. This study aimed to determine the occupational exposure threat due to fungal contamination caused by the toxigenic isolates belonging to the complex of the species of Aspergillus flavus and also isolates fromAspergillus fumigatus species complex. The study was carried out in seven Portuguese poultries, using cultural and molecularmethodologies. For conventional/cultural methods, air, surfaces, and litter samples were collected by impaction method using the Millipore Air Sampler. For the molecular analysis, air samples were collected by impinger method using the Coriolis μ air sampler. After DNA extraction, samples were analyzed by real-time PCR using specific primers and probes for toxigenic strains of the Aspergillus flavus complex and for detection of isolates from Aspergillus fumigatus complex. Through conventional methods, and among the Aspergillus genus, different prevalences were detected regarding the presence of Aspergillus flavus and Aspergillus fumigatus species complexes, namely: 74.5 versus 1.0% in the air samples, 24.0 versus 16.0% in the surfaces, 0 versus 32.6% in new litter, and 9.9 versus 15.9%in used litter. Through molecular biology, we were able to detect the presence of aflatoxigenic strains in pavilions in which Aspergillus flavus did not grow in culture. Aspergillus fumigatus was only found in one indoor air sample by conventional methods. Using molecular methodologies, however, Aspergillus fumigatus complex was detected in seven indoor samples from three different poultry units. The characterization of fungal contamination caused by Aspergillus flavus and Aspergillus fumigatus raises the concern of occupational threat not only due to the detected fungal load but also because of the toxigenic potential of these species.

Fast growing fungi: a problem to be solved to achieve characterization of occupational exposure to fungi in cork industry

Chrysonilia sitophila is a common mould in cork industry and has been identified as a cause of IgE sensitization and occupational asthma. This fungal species have a fast growth rate that may inhibit others species’ growth causing underestimated data from characterization of occupational fungal exposure. Aiming to ascertain occupational exposure to fungi in cork industry, were analyzed papers from 2000 about the best air sampling method, to obtain quantification and identification of all airborne culturable fungi, besides the ones that have fast-growing rates. Impaction method don’t allows the collection of a representative air volume, because even with some media that restricts the growth of the colonies, in environments with higher fungal load, such as cork industry, the counting of the colonies is very difficult. Otherwise, impinger method permits the collection of a representative air volume, since we can make dilution of the collected volume. Besides culture methods that allows fungal identification trough macro- and micro-morphology, growth features, thermotolerance and ecological data, we can apply molecular biology with the impinger method, to detect the presence of non-viable particles and potential mycotoxin producers’ strains, and also to detect mycotoxins presence with ELISA or HPLC. Selection of the best air sampling method in each setting is crucial to achieve characterization of occupational exposure to fungi. Information about the prevalent fungal species in each setting and also the eventual fungal load it’s needed for a criterious selection.

Federalism and health policy: the intergovernmental committees in Brazil

OBJECTIVE To analyze the dynamics of operation of the Bipartite Committees in health care in the Brazilian states.METHODS The research included visits to 24 states, direct observation, document analysis, and performance of semi-structured interviews with state and local leaders. The characterization of each committee was performed between 2007 and 2010, and four dimensions were considered: (i) level of institutionality, classified as advanced, intermediate, or incipient; (ii) agenda of intergovernmental negotiations, classified as diversified/restricted, adapted/not adapted to the reality of each state, and shared/unshared between the state and municipalities; (iii) political processes, considering the character and scope of intergovernmental relations; and (iv) capacity of operation, assessed as high, moderate, or low.RESULTS Ten committees had advanced level of institutionality. The agenda of the negotiations was diversified in all states, and most of them were adapted to the state reality. However, one-third of the committees showed power inequalities between the government levels. Cooperative and interactive intergovernmental relations predominated in 54.0% of the states. The level of institutionality, scope of negotiations, and political processes influenced Bipartite Committees’ ability to formulate policies and coordinate health care at the federal level. Bipartite Committees with a high capacity of operation predominated in the South and Southeast regions, while those with a low capacity of operations predominated in the North and Northeast.CONCLUSIONS The regional differences in operation among Bipartite Interagency Committees suggest the influence of historical-structural variables (socioeconomic development, geographic barriers, characteristics of the health care system) in their capacity of intergovernmental health care management. However, structural problems can be overcome in some states through institutional and political changes. The creation of federal investments, varied by regions and states, is critical in overcoming the structural inequalities that affect political institutions. The operation of Bipartite Committees is a step forward; however, strengthening their ability to coordinate health care is crucial in the regional organization of the health care system in the Brazilian states.

Mechanical and tribological characterization of TiB2 thin films

Titanium Diboride (TiB2) presents high mechanical and physical properties. Some wear studies were also carried out in order to evaluate its tribological properties. One of the most popular wear tests for thin films is the ball-cratering configuration. This work was focused on the study of the tribological properties of TiB2 thin films using micro-abrasion tests and following the BS EN 1071-6: 2007 standard. Due to high hardness usually patented by these films, diamond was selected as abrasive on micro-abrasion tests. Micro-abrasion wear tests were performed under five different durations, using the same normal load, speed rotation and ball. Films were deposited by unbalanced magnetron sputtering Physical Vapour Deposition (PVD) technique using TiB2 targets. TiB2 films were characterized using different methods as Scanning Electron Microscopy (SEM), Energy Dispersive X-ray Spectroscopy (EDS), Atomic Force Microscopy (AFM), X-ray Diffraction (XRD), Electron Probe Micro-Analyser (EPMA), Ultra Micro Hardness and Scratch-test Analysis, allowing to confirm that TiB2 presents adequate mechanical and physical properties. Ratio between hardness (coating and abrasive particles), wear resistance and wear coefficient were studied, showing that TiB2 films shows excellent properties for tribological applications.

Profile of women who carried out smoking cessation treatment: a systematic review

OBJECTIVE Analyze the profile of women, in health services, who carry out treatment for smoking cessation.METHODS Systematic review that used the following sources of information: Cummulative Index to Nursing and Allied Health Literature (CINAHL), PubMed,Biblioteca Virtual em Saúde (BVS), Scopus and Web of Science. We included quantitative studies that addressed the characterization of women, in health services, who carried out treatment for smoking cessation, resulting in 12 articles for analysis. The assessment of the methodological quality of the studies was performed using the instrument MAStARI from Joanna Briggs Institute.RESULTS The predominant profile of women who carried out treatment for smoking cessation in health services was composed of white, married, employed, and highly level educated women. Women who carried out the treatment for smoking cessation in specialized services had a more advanced age, were white, were married and had a diagnosis of depression. The quality level of most studies was moderate.CONCLUSIONS The profile of women who carry out treatment for smoking cessation, either in general or specialized health services, is composed of white, married, and highly level educated women. Publications about smoking women are scarce and the lack of Brazilian studies characterizing the profile of women who start treatment for smoking cessation shows the need for studies that explore this subject.

Characterization of the glycosylation of human tumor cells

Ovarian cancer is within the most lethal gynecological malignancies in woman. Therefore, many investigators study its biological aspects with the purpose of discovering more rapid diagnostic methods and efficient treatment. Resembling many other tumors, in ovarian cancer, aberrant glycosylation occurs with the appearance of novel or altered carbohydrate structures. These can be terminal motifs, such as the Lewis determinants, or entire carbohydrate sequences, which have been related to tumorigenesis and its outcome.(...)

Characterization of middle-ear condition of Oporto daycare children up-to 3 years-old: A cross sectional study

Objective The aim of this study was to determine tympanometric values of children who attend Oporto daycare centers and further analyze any relations with host and environmental factors. Methods Cross sectional study in a randomly selected sample of 117 daycare children up-to 3-years old from Oporto. Tympanometric measures were collected. Results Children presented in left ear (LE) a mean peak pressure (PP) of −156.53 daPa and a mean compliance of 0.16 cm3. Right ear (RE) revealed a PP of −145.61 daPa and a compliance of 0.19 cm3. Normal tympanograms (type A) had a lower frequency than abnormal tympanograms (type B and type C). There was a positive association between age and compliance (LE: p = 0.016; RE: p = 0.013) and between the presence of rhinorrhea and PP (LE: p = 0.002; RE: p < 0.05). Abnormal tympanograms were more frequent in Spring (RE: p = 0.009), in younger children (LE: p = 0.03) and in children that had rhinorrhea (LE: p = 0.002; RE: p = 0.044). Healthy children had a mean PP of −125.19 daPa and a mean compliance of 0.21 cm3 in LE and a mean PP of −144.27 daPa and a mean compliance of 0.22 cm3 in RE. Conclusion Tympanometric measures presented in this paper may be applicable to Oporto daycare children up-to 3 years-old. Most of daycare children revealed abnormal tympanograms. Age, rhinorrhea and season influenced children's middle-ear condition.

Advanced image processing techniques for detection and quantification of drusen

Dissertation presented to obtain the degree of Doctor of Philosophy in Electrical Engineering, speciality on Perceptional Systems, by the Universidade Nova de Lisboa, Faculty of Sciences and Technology

A regulação endócrina dos balanços de cálcio

RESUMO: As concentrações circulantes de cálcio são notavelmente constantes a despeito das variações diárias na absorção intestinal e na eliminação renal deste elemento. A regulação da calcémia é um sistema complexo que compreende vários factores controladores (a calcémia, a fosforémia, as concentrações circulantes de paratormona (PTH) e calcitriol além de muitos outros factores como hormonas esteróides em geral, outros iões como o magnésio e outros factores hormonais) e vários órgãos alvo (glândulas paratiroideias, osso, rim e intestino). As respostas dos órgãos alvo também são muito variadas. No caso mais simples, a cristalização de sais de cálcio corresponde a uma mudança de fase em que participam moléculas orgânicas que a iniciam, aceleram ou inibem. Em geral a combinação de um factor controlador com o respectivo receptor de membrana (para polipeptídeos ou iões) ou intracelular (hormonas esteróides) é apenas o primeiro passo de uma cadeia bioquímica que introduz uma enorme amplificação na resposta. A esta variedade de mecanismos de resposta correspondem grandes diferenças nos tempos de resposta que podem ser de minutos a semanas. É hoje possível “observar” (medir) com apreciável rigor nos líquidos biológicos (sangue, urina, fezes, etc.) os factores mais importantes do sistema de regulação da calcémia (cálcio, fósforo, paratormona e calcitriol) assim como administrar estes factores em experiências agudas. Esta possibilidade reflecte – se na literatura neste campo que tem vindo a crescer. O advento das técnicas da biologia molecular tem permitido a caracterização molecular de algumas das disfunções da homeostase do cálcio e é de esperar um diagnóstico fisiopatológico cada vez mais rigoroso dessas disfunções. Com o avanço dos conhecimentos nesta área que não cessa de aumentar temos cada vez maiores capacidades para fazer diagnósticos e é cada vez mais difícil interpretar com rigor os correspondentes quadros metabólicos. A análise ou síntese de sistemas complexos é a actividade mais nobre dos engenheiros que lhes permite desenhar pontes, diques, barcos, aviões ou automóveis. Com o aparecimento de computadores de médio ou grande porte foi – lhes possível utilizar descrições matemáticas não só para desenhar sistemas como ainda para interpretar eventuais falhas na sua operação. Essas descrições matemáticas consistem numa sequência de operações realizadas num computador segundo um “programa informático” que receberam a designação genérica de modelos, por analogia com as famosas leis (equações) da física que foram deduzidas a partir de um certo número de postulados e que permitem representar matematicamente processos físicos. As famosas leis de Newton são talvez os exemplos mais famosos de “modelos” de sistemas físicos. A introdução de modelos matemáticos em biologia e particularmente em medicina só se deu recentemente.MÉTODOS No trabalho que aqui se apresenta construiu - se um modelo simplificado da homeostase do cálcio destinado ao cálculo de variáveis observáveis (concentrações de cálcio, fósforo, PTH e calcitriol) de modo a poderem comparar-se valores calculados com valores observados. A escolha dos componentes do modelo foi determinada pela nossa experiência clínica e pela informação fisiopatológica e clínica publicada. Houve a preocupação de construir o modelo de forma modular de modo a ser possível a sua expansão sem grandes transformações na descrição matemática (e informática) já existente. Na sua fase actual o modelo não pode ser usado como instrumento de diagnóstico. É antes uma ferramenta destinada a esclarecer “em princípio” mecanismos fisiopatológicos. Usou – se o modelo para simular um certo número de observações publicadas e para exemplificar a sua eventual aplicação clínica na simulação de situações hipotéticas e na análise de possíveis mecanismos fisiopatológicos responsáveis por situações de hipo ou hipercalcémias. Simultaneamente fez – se uma análise dos dados acumulados relativos a doentes vistos no Serviço de Endocrinologia do Instituto Português de Oncologia de Francisco Gentil – Centro Regional Oncológico de Lisboa, S.A. CONCLUSÕES Numa população de 894 doentes com patologias variadas do Instituto Português de Oncologia de Lisboa os valores da calcémia tiveram uma distribuição normal unimodal com uma média de 9.56 mg/dl, e um erro padrão de 0.41 mg/dl. Estas observações sugerem que a calcémia está sujeita a regulação. A partir dos resultados publicados em que o metabolismo do cálcio foi perturbado por infusões de cálcio, calcitriol ou PTH, de estudos bioquímicos e fisiológicos sobre os mecanismos de acção de factores controladores da calcémia e do estudo do comportamento de órgãos alvo (paratiroideias, intestino, osso e rim) foi possível construir um modelo matemático de parâmetros concentrados do sistema de regulação da calcémia. As expressões analíticas usadas foram baseadas na cinética enzimática de modo a que os seus parâmetros tivessem um significado físico ou fisiológico simples. O modelo revelou apreciável robustez e flexibilidade. É estável quando não perturbado e transita entre estados estacionários quando perturbado. Na sua forma actual gera simulações que reproduzem satisfatoriamente um número apreciável de dados experimentais colhidos em doentes. Isto não significa que possa ser usado como instrumento de diagnóstico aplicável a doentes individuais. O desenho do modelo comporta a adição posterior de novas relações quando surgirem situações para as quais se revele insuficiente. A utilização exaustiva do modelo permitiu explicitar aspectos do metabolismo do cálcio que ou não estão contidas na sua formulação actual – o aparecimento de hipertrofia ou de adenomas das paratiroideias e as alterações na estrutura óssea , a participação de outros factores controladores – magnésio, ou estão insuficientemente descritas – alterações do metabolismo do fósforo nos hipoparatiroidismos. A análise dos dados relativos aos doentes do Serviço de Endocrinologia do IPO permitiu o início da caracterização dos tipos de patologia que representam e de possíveis mecanismos fisiopatológicos subjacentes. Estas observações são o ponto de partida para análises futuras. São exemplos das relações encontradas: a distribuição dos doentes por dois grandes grupos conforme a calcémia é determinada pelas concentrações circulantes de PTH ou estas são determinadas pela calcémia; a distribuição sazonal das concentrações de Vit. D25. no sangue; a correlação negativa entre estas e as concentrações de PTH no sangue. Também foi possível extrair a cinética do controlo da PTH sobre a síntese de calcitriol. O estudo dos níveis circulantes de PTH no pós-operatório imediato de doentes paratiroidectomizados permitiu determinar as suas taxas de degradação metabólica. O modelo permitiu simular as relações Ca/PTH no sangue, Ca/Fracção excretada da carga tubular, Ca/P no sangue para valores normais ou altos de Ca. Foram feitas simulações de situações fisiopatológicas (em “doentes virtuais”): infusões crónicas de cálcio, PTH e calcitriol; alterações no comportamento de receptores. Estas simulações correspondem a experiências que não podem ser realizadas em humanos. São exemplos da utilização do modelo na exploração de possíveis mecanismos fisiopatológicos através da observação de resultados quantitativos inacessíveis à intuição. O modelo foi útil em duas fases do trabalho: Primeiro, durante a sua síntese implicou uma escolha criticamente selectiva de informação, sua análise quantitativa e processamento, uma explicitação rigorosa (analítica) das relações funcionais entre os controladores e as variáveis e da sua integração numa estrutura global; Segundo, a simulação de situações experimentais ou clínicas (dados do Serviço de Endocrinologia do IPO) em doentes obrigou a explicitar raciocínios fisiopatológicos habitualmente formulados em bases puramente intuitivas. Esta prática revelou comportamentos óbvios após as simulações – acção reduzida das infusões PTH (simulação de hiperparatiroidismos primários) enquanto não há inibição total da respectiva secreção, necessidade de aumento da massa secretora da paratiroideia nas insuficiências renais avançadas, etc. A síntese e utilização do modelo não implicaram uma preparação matemática avançada e foram possíveis mercê da disponibilidade de “software” interactivo especificamente desenhado para a simulação de sistemas dinâmicos em que os programas se escrevem em inglês usando a simbologia simples da álgebra elementar. A função nobre de modelos desta natureza é semelhante à dos modelos usados pelos físicos desde o século XVII: permitir explicações de carácter geral funcionando como uma ferramenta intelectual para manipulação de conceitos e para a realização de “experiências pensadas” (“thought experiments”) respeitando certos princípios físicos (princípios de conservação) que estabelecem as fronteiras da realidade. -------ABSTRACT: Calcium blood levels are remarkably constant despite great variations in calcium daily intake, intestinal absorption and renal excretion. The regulation of the calcium concentration in the blood is achieved by a complex system that includes several controller factors (mainly the serum levels of calcium, phosphorus, parathyroid hormone (PTH) and calcitriol but also of steroid hormones, ions such as magnesium and other hormonal factors) and several target organs (parathyroid glands, bone, kidney and intestine). The functional response to the controlling factors obeys a variety of kinetics. The precipitation of calcium salts is a simple phase transition in which organic molecules may provide nucleation centres or inhibit the process. The combination of a controller factor with its receptor located in the cell membrane (for peptides or ions) or in the nucleus (for steroid hormones) is only the first step of a biochemical chain that introduces a huge amplification in the response. To this great variability of response we have to add the times of response that vary from minutes to weeks. It is possible to “observe” (measure) with great accuracy in biological fluids (blood, urine, faeces, etc.) the most important factors intervening in the calcium regulation (calcium, phosphorus, PTH and calcitriol). The response of the system to acute infusions of the controlling factors has also been studied. Using molecular biology techniques it has been possible to characterize some calcium homeostasis dysfunctions and better physiopathological diagnosis are expected. With the increasingly new knowledge in this area we have better capacity to diagnose but it is harder to explain correctly the underlying metabolic mechanisms. The analysis or synthesis of complex systems is the noble activity of engineers that enables them to draw bridges, dams, boats, airplanes or cars. With the availability of medium-large frame computers it was possible to use mathematical descriptions not only to draw systems but also to explain flaws in its operations. These mathematical descriptions are generally known as models by analogy with the laws (equations) of physics that allow the mathematical description of physical processes. In practice it is not possible to find general solutions for the mathematical descriptions of complex systems but (numeric) computations for specific situations can be obtained with digital computers. The introduction of mathematical models in biology and particularly in medicine is a recent event. METHODS In this thesis a simplified model of calcium homeostasis was built that enables the computation of observable variables (concentrations of calcium, phosphorus, PTH and calcitriol) and allows the comparison between the simulation values and observed values. The choice of the model’s components was made according to our clinical experience and to the published clinical and physiopathological data. The model has a modular design that allows future expansions with minor alterations in its structure. In its present form the model cannot be used for diagnosis. It is a tool designed to enlighten physiopathological processes. To exemplify its possible clinical application in the simulation of hypothetical situations and in the analysis of possible mechanisms responsible for hypo or hypercalcemias the model was used to simulate a certain number of published observations. An analysis of clinical and laboratory data from the Endocrinology Department of the Portuguese Cancer Institute (I.P.O.F.G.-C.R.O.L.,S.A.) is also presented. CONCLUSIONS In a population of 188 patients without an identifiable disease of the calcium metabolism at the Portuguese Cancer Institute the calcemia levels had a unimodal distribution with an average of 9.56 mg/dL and a S.E.M of 0.41 mg/dL. This observation confirms that serum calcium is regulated. Using published data; in which calcium metabolism was disrupted by calcium, PTH or calcitriol infusions; from biochemical and physiological studies of the action of controller factors on the calcemia; in which the response of target organs (parathyroid glands, intestine, bone, kidney) was studied it was possible to build a mathematical model of concentrated parameters of the calcium homeostasis. Analytical expressions used were based on enzymatic kinetics. The model is flexible and robust. It is stable when not disturbed and changes between steady states when disturbed. In its present form it provides simulations that reproduce closely a number of experimental clinical data. This does not mean that it can be used as a diagnostic tool for individual patients. The exhaustive utilisation of the model revealed the need of future expansions to include aspects of the calcium metabolism not included in its present form –hypertrophy or adenomas of the parathyroid glands, bone structure changes, participation of other controller factors such as magnesium – or insufficiently described – phosphate metabolism in hypoparathyroidism. The analysis of the data collected from the I.P.O.’s Endocrinology Department allowed the initial characterization of the different pathologies represented and of their possible physiopathological mechanisms. These observations are a starting point for future analysis. As examples of the relations found were: the distribution of patients in two groups according to the dependency of calcium by PTH levels or PTH levels by calcium concentration; the seasonal distribution of the serum concentrations of D25; its negative correlation with PTH concentration. It was also possible to extract the kinetics of the control of the synthesis of calcitriol by PTH. The analysis of immediate post-surgical levels of PTH in parathyroidectomized patients allowed the determination of its metabolic clearance. The model also allowed the simulation of the relations between Ca/PTH in blood, serum Ca/Fraction of tubular load excreted and Ca/P in blood for normal and high values of calcium. Simulations were made of pathological situations (in “virtual patients”): chronic infusions of calcium, PTH and calcitriol; changes in the characteristics of receptors. These simulations are not possible in real persons. They are an example of the use of this model in exploring possible mechanisms of disease through the observation of quantitative results not accessible to simple intuition. This model was useful in two phases: Firstly, its construction required a careful choice of data, its quantitative analysis and processing, an analytical description of the relations between controller factors and variables and their integration in a global structure. Secondly, the simulation of experimental or clinical (I.P.O.’s Endocrinology Department) data implied testing physiopathological explanations that previously were based on intuition. The construction and utilisation of the model didn’t demand an advanced mathematical preparation since user-friendly interactive software was used. This software was specifically designed for the simulation of dynamic systems. The programs are written in English using elementary algebra symbols. The essential function of this type of models is identical to that of those used by physicists since the XVII century which describe quantitatively natural processes and are an intellectual tool for the manipulation of concepts and the performance of “thought experiments” based in certain physical principles (conservation principles) that are the frontiers of reality.------------------RESUMÉE: Les concentrations circulantes de calcium sont constantes même pendant des variations de l’absorption intestinale et de l’élimination rénale de cet élément. La régulation de la calcémie est un système complexe qui comprend plusieurs éléments contrôleurs (la calcémie, la phosphorémie, les concentrations circulantes de l’hormone parathyroïdienne (PTH) e du calcitriol et d’autres comme les hormones stéroïdes ou des ions comme le magnésium) et plusieurs organes (glandes parathyroïdiennes, l’os, le rein et l’intestin). Les réponses de ces organes sont variées. Dans le cas plus simple, la cristallisation des sels de calcium correspond à un changement de phase dans lequel y participent des molécules organiques que la débutent, l’accélèrent ou l’inhibent. Généralement la combinaison d’un élément contrôleur avec leur récepteur de membrane (pour les peptides ou les ions) ou intracellulaire (pour les hormones stéroïdes) n’est que le premier pas d’une chaîne biochimique qu’introduit une grande amplification de la réponse. A cette variété de réponses correspondent des grandes différences des temps de réponses qu’y vont des minuits a semaines. Il est possible « observer » (mesurer) dans les fluides biologiques (sang, urine, fèces, etc.) les éléments plus importants du système de régulation de la calcémie (calcium, phosphate, PTH et le calcitriol) et les administrer en expérimentes aigus. Cette possibilité est visible dans la littérature publiée dans ce domaine qui est en croissance permanente. L’avenir des techniques de biologie moléculaire a permis caractériser des nombreuses dysfonctions de la régulation de la calcémie et on attend un diagnostique physiopathologique de ces dysfonctions chaque fois plus rigoureuses. Les connaissances dans ce domaine s’agrandissent et on a de plus de capacités pour faire des diagnostiques et il est chaque fois plus difficile les interpréter. L’analyse ou synthèse de systèmes complexes est l’activité plus noble des ingénieurs qui les permit dessiner des ponts, bateaux, avions ou automobiles. Avec des ordinateurs de médium ou grand port il les est possible utiliser descriptions mathématiques pour dessiner les systèmes et interpréter des éventuelles fautes d’opération. Ces descriptions mathématiques sont une séquence d’opérations réalisées dans un ordinateur selon « un programme informatique » qui ont reçu la désignation générique de modèles, pour analogie avec les équations de la physique qui ont été déduits d’un nombre de postulées et qu’ont permit représenter des processus physiques en équations mathématiques. Les fameuses équations de Newton sont peut-être les exemples plus connus des systèmes physiques. L’introduction des modèles mathématiques en biologie et en particulier en médecine est un évènement récent. Dans ce travaille, on a construit un modèle simplifié de l’homéostasie du calcium pour calculer les variables observables (concentrations de calcium, phosphate, PTH et calcitriol) pour les comparer. Les choix des components a été déterminés par notre expérience clinique et par l’information physiopathologique et clinique publiée. Le modèle a été construit de façon modulaire ce que permit leur postérieur expansion sans des grandes altérations dans la description mathématique et informatique déjà existante. Dans cette forme le modèle ne peut être utilisé comme un instrument de diagnostique. Il est un outil pour éclairer la physiopathologie. Le modèle a été utilisé pour simuler un certain nombre d’observations publiées et pour exemplifier leur possible utilisation clinique dans la simulation des hypothèses et de la physiopathologie des situations d’hypo ou hypercalcémie. On a fait une analyse des éléments des procès cliniques des malades observées dans le Service d’Endocrinologie de l’IPOFG-CROL, SA. Dans une population de 894 malades avec des différentes pathologies les valeurs de calcémie on une distribution uni modale avec une Médie de 9.56 mg/dL et une erreur standard de 0.41 mg/dL. Ces observations suggèrent que la calcémie soit sujette de régulation. En utilisant des résultats de travaux publiés dans lesquels le métabolisme du calcium a été changé par des infusions de calcium, calcitriol ou PTH, des études biochimiques et physiologiques sur des mécanismes d’action des éléments contrôleurs de la calcémie et de l’étude du comportement des organes cible (parathyroïdes, intestin, rein, os), il a été possible de construire un modèle mathématique de paramètres concentrés du système de régulation de la calcémie. Les expressions analytiques utilisées ont été basées sur la cinétique enzymatique de façon à que les paramètres aient eu une signification physique ou biologique. Le modèle est stable quand il n’est pas perturbé et transit entre états stationnaires quand il est sujet a des perturbations. A ce moment il fait des simulations qui reproduisent de façon satisfaisant un nombre d’observations expérimentales. La construction du modèle permit l’addiction de nouvelles relations dans les cas ou il est insuffisant. L’utilisation exhaustive du modèle a permit expliciter des aspects du métabolisme du calcium qui y ne sont pas compris – l’hyperplasie ou la formation des adénomes des parathyroïdes, les altérations de la structure des os, la participation d’outres éléments régulateurs (magnésium), ou sont insuffisamment décrites – les altérations du métabolisme des phosphates dans l’hypoparathyroidism. L’analyse de l’information des malades du Service d’Endocrinologie a permit caractériser les pathologies représentées et leurs possibles mécanismes physiopathologiques. Ces observations sont le point de départ pour les analyses futures. Sont des exemples des relations trouvées: la distribution des malades par deux groupes: ceux dans lequel la calcémie est déterminée par la PTH ou ceux dans lesquels la PTH est déterminée par la calcémie; la distribution sazonale de la concentration de la vitamine D; la corrélation négative entre la vitamine D et la PTH. On a eu la possibilité de déduire la cinétique de control de la PTH sur la synthèse du calcitriol. L’étude des niveaux circulants de PTH sur des sujets parathyroidectomisées a permit déduire leur taux de dégradation métabolique. Le modèle a permit simuler les relations Ca/PTH dans le sang, Ca/fraction éliminée par le rein, Ca/P dans le sang pour des valeurs normales ou hautes de calcium. On a fait des simulations de situations physiopathologiques (dans “malades virtuelles”): Infusions chroniques de calcium, PTH ou calcitriol; altérations des récepteurs. Ces simulations ne peuvent pas être réalisées dans les humains. Sont des exemples d’utilisation du modèle dans l’exploration des possibles mécanismes de la physiopathologie en observant des résultats quantitatifs inaccessibles à l’intuition. Le modèle a été utile pendant deux étapes des travaux: La première, dans sa construction on a choisi l’information disponible, son analyse quantitative, l’explicitation rigoureuse (analytique) des relations fonctionnelles entre les contrôleurs et les variables et sa intégration dans une structure globale. La deuxième, la simulation de situations expérimentales ou cliniques (du Service d’Endocrinologie) a obligé d’expliciter des raisonnements physiopathologiques généralement formulés utilisant l’intuition. Cette pratique a montré des comportements – action réduite des infusions de PTH (jusqu’à l’inhibition totale de leur respective sécrétion), nécessité d’augmenter la masse sécréteuse de la parathyroïde dans les insuffisants rénales, etc. La synthèse et utilisation du modèle n’ont pas besoin d’une formation avancée en mathématique et sont possibles grâce à un programme interactif qui a été conçu pour la simulation des systèmes dynamiques dans lesquels le programme se construit en anglais en utilisant la symbolique élémentaire de l’algèbre. La fonction noble de ces modèles est semblable à celles des physiques du XVII siècle: Permettre établir explications générales en fonctionnant comme un outil intellectuel pour manipuler des concepts et pour la réalisation d’expérimentes pensées en respectant certains principes de la physique (principe de la conservation) qu’établissent les frontières de la réalité.

Monitorização e caracterização de atividade física

A monitorização da atividade física é um tema que tem adquirido cada vez mais importância. Tal deve-se ao crescente sedentarismo da população em geral e adquirindo níveis muito elevados de importância devido a vários fatores como por exemplo o enorme crescimento tecnológico e menor tempo de lazer. Cada vez mais a população tem a tendência de substituir atividades como uma simples caminhada para o trabalho ou escola por algum tipo de tecnologia que reduz o consumo energético do corpo, sendo paradigmático o uso (excessivo) de viaturas automóveis. Em consequência da escassez de atividade física, doenças como a obesidade e problemas cardíacos têm vindo a aumentar nas várias faixas etárias, mas assume uma particular relevância em crianças. Nas últimas décadas têm aumentado as iniciativas de investigação com o objetivo de compreender os fatores que afetam a prática de atividade física para posteriormente a potenciar. Existem diversos métodos contudo, destaca-se preferencialmente os de observação direta, com observadores presentes. No entanto estes apresentam algumas limitações. Consequentemente são necessários esforços de investigação adicionais e novas técnicas ou metodologias. Nesta dissertação pretende-se contribuir ativamente para a investigação na área da promoção de atividade física através da utilização de vídeo, com uma análise realizada sobre dois pontos principais. Primeiro são analisadas métodos do estado de arte que requerem a presença de observadores e de que forma a captura de vídeos pode ser utilizada como alternativa ou complemento. De seguida, é realizado um estudo e avançada uma proposta inicial para utilizar mecanismos de processamento e classificação automática da atividade em alternativa ao observador humano.