Popper's Explications of Ad hocness: Circularity, Empirical Content, and Scientific Practice

Popper's explications of 'ad hoc' in relation to hypotheses and explanations turn out to be either trivial, confused or mistaken. One such explication I discuss at length is circularity; another is reduction in empirical content. I argue that non-circularity is preferable to non-ad hocness for an acceptable explanation or explanans, and I isolate some persistent errors in his analysis. Second, Popper is barking up the wrong tree in proscribing reductions in empirical content in novel hypotheses. Such reductions may constitute scientific progress. He fails to show that ad hoc hypothesis are the threat to science he claims.

Ferramenta de gestão de redes MESH

Mestrado em Engenharia Electrotécnica e de Computadores - Área de Especialização de Telecomunicações

Fast mobility support in low-power wireless networks: smart-HOP over RPL/6LoWPAN

With the emergence of low-power wireless hardware new ways of communication were needed. In order to standardize the communication between these low powered devices the Internet Engineering Task Force (IETF) released the 6LoWPAN stand- ard that acts as an additional layer for making the IPv6 link layer suitable for the lower-power and lossy networks. In the same way, IPv6 Routing Protocol for Low- Power and Lossy Networks (RPL) has been proposed by the IETF Routing Over Low power and Lossy networks (ROLL) Working Group as a standard routing protocol for IPv6 routing in low-power wireless sensor networks. The research performed in this thesis uses these technologies to implement a mobility process. Mobility management is a fundamental yet challenging area in low-power wireless networks. There are applications that require mobile nodes to exchange data with a xed infrastructure with quality-of-service guarantees. A prime example of these applications is the monitoring of patients in real-time. In these scenarios, broadcast- ing data to all access points (APs) within range may not be a valid option due to the energy consumption, data storage and complexity requirements. An alternative and e cient option is to allow mobile nodes to perform hand-o s. Hand-o mechanisms have been well studied in cellular and ad-hoc networks. However, low-power wireless networks pose a new set of challenges. On one hand, simpler radios and constrained resources ask for simpler hand-o schemes. On the other hand, the shorter coverage and higher variability of low-power links require a careful tuning of the hand-o parameters. In this work, we tackle the problem of integrating smart-HOP within a standard protocol, speci cally RPL. The simulation results in Cooja indicate that the pro- posed scheme minimizes the hand-o delay and the total network overhead. The standard RPL protocol is simply unable to provide a reliable mobility support sim- ilar to other COTS technologies. Instead, they support joining and leaving of nodes, with very low responsiveness in the existence of physical mobility.

Sensor Integration for Smart Cities Using Multi-Hop Networks

Smart Cities are designed to be living systems and turn urban dwellers life more comfortable and interactive by keeping them aware of what surrounds them, while leaving a greener footprint. The Future Cities Project [1] aims to create infrastructures for research in smart cities including a vehicular network, the BusNet, and an environmental sensor platform, the Urban Sense. Vehicles within the BusNet are equipped with On Board Units (OBUs) that offer free Wi-Fi to passengers and devices near the street. The Urban Sense platform is composed by a set of Data Collection Units (DCUs) that include a set of sensors measuring environmental parameters such as air pollution, meteorology and noise. The Urban Sense platform is expanding and receptive to add new sensors to the platform. The parnership with companies like TNL were made and the need to monitor garbage street containers emerged as air pollution prevention. If refuse collection companies know prior to the refuse collection which route is the best to collect the maximum amount of garbage with the shortest path, they can reduce costs and pollution levels are lower, leaving behind a greener footprint. This dissertation work arises in the need to monitor the garbage street containers and integrate these sensors into an Urban Sense DCU. Due to the remote locations of the garbage street containers, a network extension to the vehicular network had to be created. This dissertation work also focus on the Multi-hop network designed to extend the vehicular network coverage area to the remote garbage street containers. In locations where garbage street containers have access to the vehicular network, Roadside Units (RSUs) or Access Points (APs), the Multi-hop network serves has a redundant path to send the data collected from DCUs to the Urban Sense cloud database. To plan this highly dynamic network, the Wi-Fi Planner Tool was developed. This tool allowed taking measurements on the field that led to an optimized location of the Multi-hop network nodes with the use of radio propagation models. This tool also allowed rendering a temperature-map style overlay for Google Earth [2] application. For the DCU for garbage street containers the parner company provided the access to a HUB (device that communicates with the sensor inside the garbage containers). The Future Cities use the Raspberry pi as a platform for the DCUs. To collect the data from the HUB a RS485 to RS232 converter was used at the physical level and the Modbus protocol at the application level. To determine the location and status of the vehicles whinin the vehicular network a TCP Server was developed. This application was developed for the OBUs providing the vehicle Global Positioning System (GPS) location as well as information of when the vehicle is stopped, moving, on idle or even its slope. To implement the Multi-hop network on the field some scripts were developed such as pingLED and “shark”. These scripts helped upon node deployment on the field as well as to perform all the tests on the network. Two setups were implemented on the field, an urban setup was implemented for a Multi-hop network coverage survey and a sub-urban setup was implemented to test the Multi-hop network routing protocols, Optimized Link State Routing Protocol (OLSR) and Babel.

mRPL: Boosting mobility in the Internet of Things

The 6loWPAN (the light version of IPv6) and RPL (routing protocol for low-power and lossy links) protocols have become de facto standards for the Internet of Things (IoT). In this paper, we show that the two native algorithms that handle changes in network topology – the Trickle and Neighbor Discovery algorithms – behave in a reactive fashion and thus are not prepared for the dynamics inherent to nodes mobility. Many emerging and upcoming IoT application scenarios are expected to impose real-time and reliable mobile data collection, which are not compatible with the long message latency, high packet loss and high overhead exhibited by the native RPL/6loWPAN protocols. To solve this problem, we integrate a proactive hand-off mechanism (dubbed smart-HOP) within RPL, which is very simple, effective and backward compatible with the standard protocol. We show that this add-on halves the packet loss and reduces the hand-off delay dramatically to one tenth of a second, upon nodes’ mobility, with a sub-percent overhead. The smart-HOP algorithm has been implemented and integrated in the Contiki 6LoWPAN/RPL stack (source-code available on-line mrpl: smart-hop within rpl, 2014) and validated through extensive simulation and experimentation.

Quality-of-service aware routing for static and mobile IPv6-based low-power and lossy sensor networks using RPL

The Internet of Things (IoT) has emerged as a paradigm over the last few years as a result of the tight integration of the computing and the physical world. The requirement of remote sensing makes low-power wireless sensor networks one of the key enabling technologies of IoT. These networks encompass several challenges, especially in communication and networking, due to their inherent constraints of low-power features, deployment in harsh and lossy environments, and limited computing and storage resources. The IPv6 Routing Protocol for Low Power and Lossy Networks (RPL) [1] was proposed by the IETF ROLL (Routing Over Low-power Lossy links) working group and is currently adopted as an IETF standard in the RFC 6550 since March 2012. Although RPL greatly satisfied the requirements of low-power and lossy sensor networks, several issues remain open for improvement and specification, in particular with respect to Quality of Service (QoS) guarantees and support for mobility. In this paper, we focus mainly on the RPL routing protocol. We propose some enhancements to the standard specification in order to provide QoS guarantees for static as well as mobile LLNs. For this purpose, we propose OF-FL (Objective Function based on Fuzzy Logic), a new objective function that overcomes the limitations of the standardized objective functions that were designed for RPL by considering important link and node metrics, namely end-to-end delay, number of hops, ETX (Expected transmission count) and LQL (Link Quality Level). In addition, we present the design of Co-RPL, an extension to RPL based on the corona mechanism that supports mobility in order to overcome the problem of slow reactivity to frequent topology changes and thus providing a better quality of service mainly in dynamic networks application. Performance evaluation results show that both OF-FL and Co-RPL allow a great improvement when compared to the standard specification, mainly in terms of packet loss ratio and average network latency. 2015 Elsevier B.V. Al

Estudio e implementación de una autoridad de certificación distribuida

Aquest projecte presenta, en primer lloc, un estudi dels protocols de generació de claus criptogràfiques i autoritats de certificació distribuïdes més destacables desenvolupades fins a l'actualitat. Posteriorment, implementem un protocol, que toleri les errades, de generació distribuïda de claus RSA sense servidor de confiança, orientat a xarxes ad-hoc. El protocol necessita la participació conjunta de n nodes per generar un mòdul RSA (N = pq), un exponent d'encriptació públic i les particions de l'exponent privat d, seguint un esquema llindar (t, n).

Improved flooding of broadcast messages using extended multipoint relaying

A common operation in wireless ad hoc networks is the flooding of broadcast messages to establish network topologies and routing tables. The flooding of broadcast messages is, however, a resource consuming process. It might require the retransmission of messages by most network nodes. It is, therefore, very important to optimize this operation. In this paper, we first analyze the multipoint relaying (MPR) flooding mechanism used by the Optimized Link State Routing (OLSR) protocol to distribute topology control (TC) messages among all the system nodes. We then propose a new flooding method, based on the fusion of two key concepts: distance-enabled multipoint relaying and connected dominating set (CDS) flooding. We present experimental simulationsthat show that our approach improves the performance of previous existing proposals.

Immediate Decision-Making and Information Needs in Intensive Care Coordination

The aim of this study was to develop a theoretical model for information integration to support the deci¬sion making of intensive care charge nurses, and physicians in charge – that is, ICU shift leaders. The study focused on the ad hoc decision-making and immediate information needs of shift leaders during the management of an intensive care unit’s (ICU) daily activities. The term ‘ad hoc decision-making’ was defined as critical judgements that are needed for a specific purpose at a precise moment with the goal of ensuring instant and adequate patient care and a fluent flow of ICU activities. Data collection and research analysis methods were tested in the identification of ICU shift leaders’ ad hoc decision-making. Decision-making of ICU charge nurses (n = 12) and physicians in charge (n = 8) was observed using a think-aloud technique in two university-affiliated Finnish ICUs for adults. The ad hoc decisions of ICU shift leaders were identified using an application of protocol analysis. In the next phase, a structured online question¬naire was developed to evaluate the immediate information needs of ICU shift leaders. A national survey was conducted in all Finnish, university-affiliated hospital ICUs for adults (n = 17). The questionnaire was sent to all charge nurses (n = 515) and physicians in charge (n = 223). Altogether, 257 charge nurses (50%) and 96 physicians in charge (43%) responded to the survey. The survey was also tested internationally in 16 Greek ICUs. From Greece, 50 charge nurses out of 240 (21%) responded to the survey. A think-aloud technique and protocol analysis were found to be applicable for the identification of the ad hoc decision-making of ICU shift leaders. During one day shift leaders made over 200 ad hoc decisions. Ad hoc decisions were made horizontally, related to the whole intensive care process, and vertically, concerning single intensive care incidents. Most of the ICU shift leaders’ ad hoc decisions were related to human resources and know-how, patient information and vital signs, and special treatments. Commonly, this ad hoc decision-making involved several multiprofessional decisions that constituted a bundle of immediate decisions and various information needs. Some of these immediate information needs were shared between the charge nurses and the physicians in charge. The majority of which concerned patient admission, the organisation and management of work, and staff allocation. In general, the information needs of charge nurses were more varied than those of physicians. It was found that many ad hoc deci-sions made by the physicians in charge produced several information needs for ICU charge nurses. This meant that before the task at hand was completed, various kinds of information was sought by the charge nurses to support the decision-making process. Most of the immediate information needs of charge nurses were related to the organisation and management of work and human resources, whereas the information needs of the physicians in charge mainly concerned direct patient care. Thus, information needs differ between professionals even if the goal of decision-making is the same. The results of the international survey confirmed these study results for charge nurses. Both in Finland and in Greece the information needs of charge nurses focused on the organisation and management of work and human resources. Many of the most crucial information needs of Finnish and Greek ICU charge nurses were common. In conclusion, it was found that ICU shift leaders make hundreds of ad hoc decisions during the course of a day related to the allocation of resources and organisation of patient care. The ad hoc decision-making of ICU shift leaders is a complex multi-professional process, which requires a lot of immediate information. Real-time support for information related to patient admission, the organisation and man¬agement of work, and allocation of staff resources is especially needed. The preliminary information integration model can be applied when real-time enterprise resource planning systems are developed for intensive care daily management

Protocole de routage basé sur des passerelles mobiles pour un accès Internet dans les réseaux véhiculaires

La rapide progression des technologies sans fil au cours de ces dernières années a vu naître de nouveaux systèmes de communication dont les réseaux véhiculaires. Ces réseaux visent à intégrer les nouvelles technologies de l’information et de la communication dans le domaine automobile en vue d’améliorer la sécurité et le confort sur le réseau routier. Offrir un accès Internet aux véhicules et à leurs occupants peut sans doute aider à anticiper certains dangers sur la route tout en rendant plus agréables les déplacements à bord des véhicules. Le déploiement de ce service nécessite que des messages soient échangés entre les véhicules. Le routage constitue un élément crucial dans un réseau, car définissant la façon dont les différentes entités échangent des messages. Le routage dans les VANETS constitue un grand défi car ces derniers sont caractérisés par une forte mobilité entraînant une topologie très dynamique. Des protocoles ont été proposés pour étendre Internet aux réseaux véhiculaires. Toutefois, la plupart d’entre eux nécessitent un coût élevé de messages de contrôle pour l’établissement et le maintien des communications. Ceci a pour conséquence la saturation de la bande passante entrainant ainsi une baisse de performance du réseau. Nous proposons dans ce mémoire, un protocole de routage qui s’appuie sur des passerelles mobiles pour étendre Internet aux réseaux véhiculaires. Le protocole prend en compte la mobilité des véhicules et la charge du réseau pour l’établissement et le maintien des routes.

Un protocole de diffusion des messages dans les réseaux véhiculaires

De nos jours, la voiture est devenue le mode de transport le plus utilisé, mais malheureusement, il est accompagné d’un certain nombre de problèmes (accidents, pollution, embouteillages, etc.), qui vont aller en s’aggravant avec l’augmentation prévue du nombre de voitures particulières, malgré les efforts très importants mis en œuvre pour tenter de les réduire ; le nombre de morts sur les routes demeure très important. Les réseaux sans fil de véhicules, appelés VANET, qui consistent de plusieurs véhicules mobiles sans infrastructure préexistante pour communiquer, font actuellement l’objet d'une attention accrue de la part des constructeurs et des chercheurs, afin d’améliorer la sécurité sur les routes ou encore les aides proposées aux conducteurs. Par exemple, ils peuvent avertir d’autres automobilistes que les routes sont glissantes ou qu’un accident vient de se produire. Dans VANET, les protocoles de diffusion (broadcast) jouent un rôle très important par rapport aux messages unicast, car ils sont conçus pour transmettre des messages de sécurité importants à tous les nœuds. Ces protocoles de diffusion ne sont pas fiables et ils souffrent de plusieurs problèmes, à savoir : (1) Tempête de diffusion (broadcast storm) ; (2) Nœud caché (hidden node) ; (3) Échec de la transmission. Ces problèmes doivent être résolus afin de fournir une diffusion fiable et rapide. L’objectif de notre recherche est de résoudre certains de ces problèmes, tout en assurant le meilleur compromis entre fiabilité, délai garanti, et débit garanti (Qualité de Service : QdS). Le travail de recherche de ce mémoire a porté sur le développement d’une nouvelle technique qui peut être utilisée pour gérer le droit d’accès aux médias (protocole de gestion des émissions), la gestion de grappe (cluster) et la communication. Ce protocole intègre l'approche de gestion centralisée des grappes stables et la transmission des données. Dans cette technique, le temps est divisé en cycles, chaque cycle est partagé entre les canaux de service et de contrôle, et divisé en deux parties. La première partie s’appuie sur TDMA (Time Division Multiple Access). La deuxième partie s’appuie sur CSMA/CA (Carrier Sense Multiple Access / Collision Avoidance) pour gérer l’accès au medium. En outre, notre protocole ajuste d’une manière adaptative le temps consommé dans la diffusion des messages de sécurité, ce qui permettra une amélioration de la capacité des canaux. Il est implanté dans la couche MAC (Medium Access Control), centralisé dans les têtes de grappes (CH, cluster-head) qui s’adaptent continuellement à la dynamique des véhicules. Ainsi, l’utilisation de ce protocole centralisé nous assure une consommation efficace d’intervalles de temps pour le nombre exact de véhicules actifs, y compris les nœuds/véhicules cachés; notre protocole assure également un délai limité pour les applications de sécurité, afin d’accéder au canal de communication, et il permet aussi de réduire le surplus (overhead) à l’aide d’une propagation dirigée de diffusion.

Performance improvement of multiple Connections in AODV with the concern of Node bandwidth

Mobile Ad-hoc Networks (MANETS) consists of a collection of mobile nodes without having a central coordination. In MANET, node mobility and dynamic topology play an important role in the performance. MANET provide a solution for network connection at anywhere and at any time. The major features of MANET are quick set up, self organization and self maintenance. Routing is a major challenge in MANET due to it’s dynamic topology and high mobility. Several routing algorithms have been developed for routing. This paper studies the AODV protocol and how AODV is performed under multiple connections in the network. Several issues have been identified. The bandwidth is recognized as the prominent factor reducing the performance of the network. This paper gives an improvement of normal AODV for simultaneous multiple connections under the consideration of bandwidth of node.

Energy Efficient Cache Discovery in Wireless Mobile Ad oc Networks

Data caching is an attractive solution for reducing bandwidth demands and network latency in mobile ad hoc networks. Deploying caches in mobile nodes can reduce the overall traf c considerably. Cache hits eliminate the need to contact the data source frequently, which avoids additional network overhead. In this paper we propose a data discovery and cache management policy for cooperative caching, which reduces the power usage, caching overhead and delay by reducing the number of control messages flooded into the network .A cache discovery process based on position cordinates of neighboring nodes is developed for this .The stimulstion results gives a promising result based on the metrics of the studies.

An Effective Path Protection Method to Attain the Route Stability in MANET

With the increasing popularity of wireless network and its application, mobile ad-hoc networks (MANETS) emerged recently. MANET topology is highly dynamic in nature and nodes are highly mobile so that the rate of link failure is more in MANET. There is no central control over the nodes and the control is distributed among nodes and they can act as either router or source. MANTEs have been considered as isolated stand-alone network. Node can add or remove at any time and it is not infrastructure dependent. So at any time at any where the network can setup and a trouble free communication is possible. Due to more chances of link failures, collisions and transmission errors in MANET, the maintenance of network became costly. As per the study more frequent link failures became an important aspect of diminishing the performance of the network and also it is not predictable. The main objective of this paper is to study the route instability in AODV protocol and suggest a solution for improvement. This paper proposes a new approach to reduce the route failure by storing the alternate route in the intermediate nodes. In this algorithm intermediate nodes are also involved in the route discovery process. This reduces the route establishment overhead as well as the time to find the reroute when a link failure occurs.

Impact of Node Mobility on Routing Protocols for Wireless Sensor Networks

Wireless sensor networks monitor their surrounding environment for the occurrence of some anticipated phenomenon. Most of the research related to sensor networks considers the static deployment of sensor nodes. Mobility of sensor node can be considered as an extra dimension of complexity, which poses interesting and challenging problems. Node mobility is a very important aspect in the design of effective routing algorithm for mobile wireless networks. In this work we intent to present the impact of different mobility models on the performance of the wireless sensor networks. Routing characteristics of various routing protocols for ad-hoc network were studied considering different mobility models. Performance metrics such as end-to-end delay, throughput and routing load were considered and their variations in the case of mobility models like Freeway, RPGM were studied. This work will be useful to figure out the characteristics of routing protocols depending on the mobility patterns of sensors