Investigations of the scaling criteria for a mild combustion burner

In this paper, a new strategy for scaling burners based on "mild combustion" is evolved and adopted to scaling a burner from 3 to a 150 kW burner at a high heat release Late of 5 MW/m(3) Existing scaling methods (constant velocity, constant residence time, and Cole's procedure [Proc. Combust. Inst. 28 (2000) 1297]) are found to be inadequate for mild combustion burners. Constant velocity approach leads to reduced heat release rates at large sizes and constant residence time approach in unacceptable levels of pressure drop across the system. To achieve mild combustion at high heat release rates at all scales, a modified approach with high recirculation is adopted in the present studies. Major geometrical dimensions are scaled as D similar to Q(1/3) with an air injection velocity of similar to 100 m/s (Delta p similar to 600 mm water gauge). Using CFD support, the position of air injection holes is selected to enhance the recirculation rates. The precise role of secondary air is to increase the recirculation rates and burn LIP the residual CO in the downstream. Measurements of temperature and oxidizer concentrations inside 3 kW, 150 kW burner and a jet flame are used to distinguish the combustion process in these burners. The burner can be used for a wide range of fuels from LPG to producer gas as extremes. Up to 8 dB of noise level reduction is observed in comparison to the conventional combustion mode. Exhaust NO emissions below 26 and 3 ppm and temperatures 1710 and 1520 K were measured for LPG and producer gas when the burner is operated at stoichiometry. (c) 2004 The Combustion Institute. Published by Elsevier Inc. All rights reserved.

Pareto-optimal solutions for multi-objective optimization of fed-batch bioreactors using nondominated sorting genetic algorithm

Many optimal control problems are characterized by their multiple performance measures that are often noncommensurable and competing with each other. The presence of multiple objectives in a problem usually give rise to a set of optimal solutions, largely known as Pareto-optimal solutions. Evolutionary algorithms have been recognized to be well suited for multi-objective optimization because of their capability to evolve a set of nondominated solutions distributed along the Pareto front. This has led to the development of many evolutionary multi-objective optimization algorithms among which Nondominated Sorting Genetic Algorithm (NSGA and its enhanced version NSGA-II) has been found effective in solving a wide variety of problems. Recently, we reported a genetic algorithm based technique for solving dynamic single-objective optimization problems, with single as well as multiple control variables, that appear in fed-batch bioreactor applications. The purpose of this study is to extend this methodology for solution of multi-objective optimal control problems under the framework of NSGA-II. The applicability of the technique is illustrated by solving two optimal control problems, taken from literature, which have usually been solved by several methods as single-objective dynamic optimization problems. (C) 2004 Elsevier Ltd. All rights reserved.

Hybrid moving block bootstrap for stochastic simulation of multi-site multi-season streamflows

The Hybrid approach introduced by the authors for at-site modeling of annual and periodic streamflows in earlier works is extended to simulate multi-site multi-season streamflows. It bears significance in integrated river basin planning studies. This hybrid model involves: (i) partial pre-whitening of standardized multi-season streamflows at each site using a parsimonious linear periodic model; (ii) contemporaneous resampling of the resulting residuals with an appropriate block size, using moving block bootstrap (non-parametric, NP) technique; and (iii) post-blackening the bootstrapped innovation series at each site, by adding the corresponding parametric model component for the site, to obtain generated streamflows at each of the sites. It gains significantly by effectively utilizing the merits of both parametric and NP models. It is able to reproduce various statistics, including the dependence relationships at both spatial and temporal levels without using any normalizing transformations and/or adjustment procedures. The potential of the hybrid model in reproducing a wide variety of statistics including the run characteristics, is demonstrated through an application for multi-site streamflow generation in the Upper Cauvery river basin, Southern India. (C) 2004 Elsevier B.V. All rights reserved.

Essays on the Linkages Between Financial Markets, and Risk Asymmetries (summary section only)

During the last few decades there have been far going financial market deregulation, technical development, advances in information technology, and standardization of legislation between countries. As a result, one can expect that financial markets have grown more interlinked. The proper understanding of the cross-market linkages has implications for investment and risk management, diversification, asset pricing, and regulation. The purpose of this research is to assess the degree of price, return, and volatility linkages between both geographic markets and asset categories within one country, Finland. Another purpose is to analyze risk asymmetries, i.e., the tendency of equity risk to be higher after negative events than after positive events of equal magnitude. The analysis is conducted both with respect to total risk (volatility), and systematic risk (beta). The thesis consists of an introductory part and four essays. The first essay studies to which extent international stock prices comove. The degree of comovements is low, indicating benefits from international diversification. The second essay examines the degree to which the Finnish market is linked to the “world market”. The total risk is divided into two parts, one relating to world factors, and one relating to domestic factors. The impact of world factors has increased over time. After 1993, when foreign investors were allowed to freely invest in Finnish assets, the risk level has been higher than previously. This was also the case during the economic recession in the beginning of the 1990’s. The third essay focuses on the stock, bond, and money markets in Finland. According to a trading model, the degree of volatility linkages should be strong. However, the results contradict this. The linkages are surprisingly weak, even negative. The stock market is the most independent, while the money market is affected by events on the two other markets. The fourth essay concentrates on volatility and beta asymmetries. Contrary to many international studies there are only few cases of risk asymmetries. When they occur, they tend to be driven by the market-wide component rather than the portfolio specific element.

Domestic labour relations in India : Vulnerability and gendered life courses in Jaipur

This study explores labour relations between domestic workers and employers in India. It is based on interviews with both employers and workers, and ethnographically oriented field work in Jaipur, carried out in 2004-2007. Combining development studies with gender studies, labour studies, and childhood studies, it asks how labour relations between domestic workers and employers are formed in Jaipur, and how female domestic workers trajectories are created. Focusing on female part-time maids and live-in work arrangements, the study analyses children s work in the context of overall work force, not in isolation from it. Drawing on feminist Marxism, domestic labour relations are seen as an arena of struggle. The study takes an empirical approach, showing class through empiria and shows how paid domestic work is structured and stratified through intersecting hierarchies of class, caste, gender, age, ethnicity and religion. The importance of class in domestic labour relations is reiterated, but that of caste, so often downplayed by employers, is also emphasized. Domestic workers are crucial to the functioning of middle and upper middle class households, but their function is not just utilitarian. Through them working women and housewives are able to maintain purity and reproduce class disctinctions, both between poor and middle classes and lower and upper middle classes. Despite commodification of work relations, traditional elements of service relationships have been retained, particularly through maternalist practices such as gift giving, creating a peculiar blend of traditional and market practices. Whilst employers of part-time workers purchase services in a segmented market from a range of workers for specific, traditional live-in workers are also hired to serve employers round the clock. Employers and workers grudgingly acknowledged their dependence on one another, employers seeking various strategies to manage fear of servant crime, such as the hiring of children or not employing live-in workers in dual-earning households. Paid domestic work carries a heavy stigma and provide no entry to other jobs. It is transmitted from mothers to daughters and working girls were often the main income providers in their families. The diversity of working conditions is analysed through a continuum of vulnerability, generic live-in workers, particularly children and unmarried young women with no close family in Jaipur, being the most vulnerable and experienced part-time workers the least vulnerable. Whilst terms of employment are negotiated informally and individually, some informal standards regarding salary and days off existed for maids. However, employers maintain that workings conditions are a matter of individual, moral choice. Their reluctance to view their role as that of employers and the workers as their employees is one of the main stumbling blocks in the way of improved working conditions. Key words: paid domestic work, India, children s work, class, caste, gender, life course

Force measurements on hypersonic waveriders in the IISc hypersonic shock tunnel HST2

The drag and lift coefficients for a viscous optimized Mach 6 conical waverider has been measured using an accelerometer force balance system in the IISc hypersonic shock tunnel. A rubber bush placed in between the waverider model and the steel sting ensures unrestrained motion to the model during shock tunnel testing (500 mu s). Two accelerometers mounted on the model are used to measure the model accelerations in the axial and normal directions. The measured value of lift to drag ratio at zero angle of incidence for the IISc conical waverider with viscous optimized leading edge is 2.149, which compares well with the value reported in the open literature (Anderson et al 1991) for similar class of waveriders designed for a flight Mach number of 6. The details of the experimental study along with illustrative numerical results are discussed in this paper.

Thermal transport in high porosity cellular metal foams

The heat dissipation capability of highly porous cellular metal foams with open cells subject to forced air convection is studied using a combined experimental and analytical approach. The cellular morphologies of six FeCrAlY (an iron-based alloy) foams and six copper alloy foams with a range of pore sizes and porosities are quantified with the scanning electronic microscope and image analysis. Experimental measurements on pressure drop and heat transfer for copper foams are carried out. A numerical model for forced convection across open-celled metal foams is subsequently developed, and the predictions are compared with those measured. Reasonably good agreement with test data is obtained, given the complexity of the cellular foam morphology and the associated momentum/energy transport. The results show that cell size has a more significant effect on the overall heat transfer than porosity. An optimal porosity is obtained based on the balance between pressure drop and overall heat transfer, which decreases as the Reynolds number is increased.

Thermal radiation in ultralight metal foams with open cells

This paper presents results from experimental measurements on radiative transfer in FeCrAlY (a steel based high temperature alloy) foams having high porosity (95%) and different cell sizes, manufactured at low cost from the sintering route. The spectral transmittance and reflectance are measured at different infrared wavelengths ranging from 2.5 to 50 μm, which are subsequently used to determine the extinction coefficient and foam emissivity. The results show that the spectral quantities are strongly dependent on the wavelength, particularly in the short wavelength regime (<25 μm). Whilst the extinction coefficient decreases with increasing cell size, the effect of cell size on foam reflectance is not significant. When the temperature is increased, the total extinction coefficient increases but the total reflectance decreases. An analytical model based on geometric optics laws, diffraction theory and metal foam morphology is developed to predict the radiative transfer, with cell size (or cell ligament diameter) and porosity identified as the two key parameters that dictate the foam radiative properties. Close agreement between the predicted effective foam conductivity due to radiation alone and that measured is observed. At fixed porosity, the radiative conductivity of the metal foam increases with increasing cell size and temperature. © 2004 Elsevier Ltd.All rights reserved.

Estudio comparativo de la producción orgánica y tradicional de Papa (Solanum tuberosum L.) en Miraflor, Estelí

Dos sistemas de producción de papa (Solanum tuberosum L.) fueron comparados en la comunidad de Miraflor, departamento de Estelí. El objetivo del estudio fue determinar la viabilidad y rentabilidad de los sistemas. Los sistemas comparados fueron: producción tradicional y producción orgánica. El experimento fue establecido en Febrero del año 2001, utilizando la metodología de parcelas pareadas, las cuales fueron establecidas en campos de productores. Se establecieron cuatro parcelas (una por productor) con cinco réplicas. Los datos fueron analizados con el programa estadistico SSPS utilizando el estadistico TStudent. Los resultados mostraron diferencias estadísticas entre las tecnologías en la producción de tubérculos de 35 -55 mm y cantidad total de tubérculos. Los máximos valores fueron registrados por el sistema de producción tradicional. Con relación a las variables peso de tubérculos de 35- 55 mm y peso total de tubérculos, las diferencias fueron altamente significativas, registrándose los máximos valores en el sistema de producción tradicional. En las variables altura final de plantas y numero de tallos por planta, no se observaron diferencias estadísticas entre tratamientos. El tizón tardío (Phytophthora infestans), enfermedad común en el cultivo, se presentó con mayor incidencia en sistema de producción orgánico. El análisis económico, no muestra diferencias entre los sistemas de producción, sin embrago, el sistema de producción tradicional mostró mayor taza de retorno marginal.

Caracterización y evaluación preliminar de 14 accesiones de Chile (Capsicum spp)

La presente investigación se llevó a cabo en el Programa de Recursos Genéticos Nicaragüenses (REGEN) de la Universidad Nacional Agraria, durante el período Octubre 2002-Abril-2003. El objetivo fue estudiar y evaluar gennoplasma nativo e introducido de chile {Capsicum spp.) en condiciones del trópico seco de Nicaragua. La caracterización de las 14 accesiones en base a la guía de descriptores propuesta por IBPGR (lt¡83) y mediante el análisis estadístico univariado y multivariados permitió identificar los principales descriptores cualitatí vos ( fonna del fruto, pungencía y forma del fruto en la unión con el pedúnculo) y cuantitativos (diámetro de semillas, diámetro del fruto y peso del fruto) que son de gran utilidad para el estudio de la variación genética de chile. Además se logró conformar un catálogo con las características de cada uno de los material.es. Las accesiones de mayor variación fueron Bacatum, Diente de perro, Pico de pájaro, Alfilerillo y Chile ancho. El resto de materiales tienen características más uniformes. Las accesiones evaluadas presentaron características morfológicas propias de las especies C. annuum, C. frutescens y C. baccatum. En el germopla.sma de Capsicum evaluado se encontraron materiales que poseen diferente reacción a plagas y enfermedades. Palabras claves: Capsicum; accesión; germoplasma; descriptor.

Efectos de la combinación de abonos orgánicos y fertilizante químico sobre la densidad aparente y el espacio poroso total de un suelo volcánico Nicaragüense

Se realizó un muestreo de suelos en parcelas experimentales de un ensayo de campo, con el fin de evaluar los efectos de la aplicación de tres dosis de Abonos Orgáníeos (AO), combinadas con fertilizante químico, sobre la densidad aparente (á) y el espacio poroso total (FPT) de un suelo volcánico nicaragüense. El ensayo se realizó durante la época de Postrera (Septiembre -Diciembre) de 1989, en la Finca Experimental La Compañía, Carazo, Nicaragua; sobre un suelo franco - arenoso derivado de cenizas volcánicas (Typic Durandepts). Se utilizó un experimento Bifactorial en diseño de parcelas divididas en Bloques completos al azar, con cuatro réplicas. Los AO empleados fueron Gallinaza, Compost y Pulpa de café, siendo las dosis ensayadas de 5, 10 y 15 ton.ha 1 de cada uno, combinadas con Fosfato Díamónico a razón de 64.8 kg.ba· 1• Se observó una disminoción de la d y un aumento del EPT con la aplícacion de los AO, siendo este efecto influido por las dosis incorporadas. Las parcelas que presentaron la menor d y el mayor EPT, fueron aquellas donde se incorporó el Compost.

Diversidad florística del bosque de galería en dos localidades del departamento de Carazo, Nicaragua

En las localidades Los Encuentros y Chacocente, en el departamento de Carazo, se realizó un estudio sobre la composición florísticas de las especies arbóreas en el bosque de galería. Los resultados corresponden a un inventario completo de los árboles de 1 O cm de diámetro a la altura del pecho (Dap) y regeneración natural en parcelas con área neta de muestreo de 1 hectárea en cada sitio, con sub-parcelas de 100 m2 para el muestreo de regeneración. Los bosques estudiados son Chacocente (360 msnm) y Los Encuentros (180 msnm). Ambos bosques son de galería y pertenecen a la zona de Vida Bosque Tropical Seco con transición a subtropical. , según el sistema de clasificación de Holdridge. En ambos bosques se encontraron un total 65 especies, pertenecientes a 39 familias y 53 géneros. En el bosque localizado en Los Encuentros, se encontraron 24 especies, siendo las mas frecuentes el Papaturro (Coccoloba caracasana), anona (Annona glabra) y Chaperno blanco (Lonchocarpus minimiflorus). En Chacocente se encontraron 41 especies, siendo las mas frecuentes Palo de piojo (Trichilia hirta), Naranjillo (Capparis odoratisima) y Melero (Thoudinium decandrum). La abundancia de árboles con Dap mayor de 10 cm fue de 333 en Chacocente y 379 en Los Encuentros. Los cocientes de mezcla obtenidos fueron 1:8 para el bosque del Refugio de Vida Silvestre, Chacocente y 1:15 para el de los Encuentros. En ambas comunidades difieren las familias mayormente representadas. Los valores de los coeficientes de Jaccard (4.4 %) y Sorensen (8.4 %) revelan poca similitud florística entre ambos sitios. La regeneración natural presentó en algunos aspectos el mismo comportamiento de la vegetación con Dap mayor o igual a los 10 cm, siendo la única diferencia los valores del coeficiente de mezcla que presentan al bosque de la comunidad Los Encuentros con mayor diversidad florística (l :50 en comparación con 1:16 de Chacocente). La abundancia de individuos de la regeneración natural fue de 242 individuos por hectárea en Los Encuentros y de 860 individuos por hectarea en Chacocente.