Erbium, chromium : yttrium scandium gallium garnet laser for caries removal: influence on bonding of a self-etching adhesive system

This study evaluated the influence of the dental substrates obtained after the use of different caries removal techniques on bonding of a self-etching system. Forty, extracted, carious, human molars were ground to expose flat surfaces containing caries-infected dentine surrounded by sound dentine. The caries lesions of the specimens were removed or not (control-G1) either by round steel burs and water-cooled, low speed, handpiece (G2), or by irradiation with an erbium, chromium:yttrium scandium gallium garnet (Er,Cr:YSGG) laser (2W, 20 Hz, 35.38 J/cm(2), fiber G4 handpiece with 0.2826 mm(2), non-contact mode at a 2 mm distance, 70% air/20% water-G3) or using a chemo-mechanical method (Carisolv-G4). Caries-infected, caries-affected and sound dentines were submitted to a bonding system followed by construction of a resin-based composite crown. Hour-glass shaped samples were obtained and submitted to a micro-tensile bond test. The bond strength data were compared by analysis of variance (ANOVA), complemented by Tukey`s test (P <= 0.05). The samples of sound dentine presented higher bond strengths than did samples of caries-affected dentine, except for the groups treated with the Er,Cr:YSGG laser. The highest bond strengths were observed with the sound dentine treated with burs and Carisolv. The bond strengths to caries-affected dentine were similar in all groups. Additionally, bonding to caries-affected dentine of the Er,Cr:YSGG laser and Carisolv groups was similar to bonding to caries-infected dentine. Thus, caries-affected dentine is not an adequate substrate for adhesion. Moreover, amongst the caries removal methods tested, the Er,Cr:YSGG laser irradiation was the poorest in providing a substrate for bonding with the tested self-etching system.

Mother-to-infant emotional involvement at birth

Objectives. To study mother-to-infant emotional involvement at birth, namely factors (socio-demographics, previous life events, type of delivery, pain at childbirth, support from partner, infant characteristics, early experiences with the newborn, and mother’s mood) that interfere with the mother’s positive, negative and not clear emotions toward the newborn. Methods. The Bonding Scale (an extended Portuguese version of the ‘New Mother-to-Infant Bonding Scale’) and the Edinburgh Postnatal Depression Scale were administrated during the first after delivery days to 315 mothers recruited at Ju´lio Dinis Maternity Hospital (MJD, Porto, Portugal). Results. A worse emotional involvement with the newborn was observed when the mother was unemployed, unmarried, had less than grade 9, previous obstetrical/psychological problems or was depressed, as well as when the infant was female, had neonatal problems or was admitted in the intensive care unit. Lower total bonding results were significantly predicted when the mother was depressed and had a lower educational level; being depressed, unemployed and single predicted more negative emotions toward the infant as well. No significant differences in the mother-to-infant emotional involvement were obtained for events related to childbirth, such as type of delivery, pain and partner support, or early experiences with the newborn; these events do not predict mother’s bonding results either. Conclusion. The study results support the need for screening and supporting depressed, unemployed and single mothers, in order to prevent bonding difficulties with the newborn at birth.

Cure Characteristics of Short Polyester Fiber-PolyurethaneElastomer Composite with Interfacial Bonding Agents Based on Polymeric 4,4'-Diphenylmethanediisocyanate

Cure characteristics of short polyester fiber-polyurethane composites with respect to different bonding agents (MD resins) based on 4, 4' diphenylmethanediisocyanate (MDI) and various diols like propyleneglycol (PG), polypropyleneglycol (PPG) and glycerol (GL) were studied. Tmax. - Tmin. of composites having MD resin were found to be higher than the composite without MD resin. Minimum torque and Tmax. - Tmin., scorch time and optimum cure time were increased with the increase of MDI equivalence. Optimum ratio of MDI / -of in the resin was found to be within the range of 1-1.5. It was observed from the cure characteristics that for getting better adhesion between short polyester fiber and the polyurethane matrix the best choice of MD resin was one based on MDI and 1:1 equivalent mixture of polypropyleneglycol and glycerol.

On the transition from localized to delocalized electronic states in divalent-metal clusters

The transition from van der Waals to covalent bonding, which is expected to occur in divalent-metal clusters with increasing cluster size, is discussed. We propose a model which takes into account, within the same electronic theory, the three main competing contributions, namely the kinetic energy of the electrons, the Coulomb interactions between electrons, and the s \gdw p intraatomic transitions responsible for van der Waals like bonding. The model is solved by taking into account electron correlations using a generalized Gutzwiller approximation (slave boson method). The occurrence of electron localization is studied as a function of the interaction parameters and cluster size.

Shear strength of the bond to primary dentin: influence of Er:YAG laser irradiation distance

The aim of this study was to assess in vitro the influence of Er:YAG laser irradiation distance on the shear strength of the bond between an adhesive restorative system and primary dentin. A total of 60 crowns of primary molars were embedded in acrylic resin and mechanically ground to expose a flat dentin surface and were randomly assigned to six groups (n = 10). The control group was etched with 37% phosphoric acid. The remaining five groups were irradiated (80 mJ, 2 Hz) at different irradiation distances (11, 12, 16, 17 and 20 mm), followed by acid etching. An adhesive agent (Single Bond) was applied to the bonding sites, and resin cylinders (Filtek Z250) were prepared. The shear bond strength tests were performed in a universal testing machine (0.5 mm/min). Data were submitted to statistical analysis using one-way ANOVA and the Kruskal-Wallis test (p < 0.05). The mean shear bond strengths were: 7.32 +/- 3.83, 5.07 +/- 2.62, 6.49 +/- 1.64, 7.71 +/- 0.66, 7.33 +/- 0.02, and 9.65 +/- 2.41 MPa in the control group and the groups irradiated at 11, 12, 16, 17, and 20 mm, respectively. The differences between the bond strengths in groups II and IV and between the bond strengths in groups II and VI were statistically significant (p < 0.05). Increasing the laser irradiation distance resulted in increasing shear strength of the bond to primary dentin.

In vivo evaluation of the biocompatibility of three current bonding agents

The aim of this in vivo study was to evaluate the biocompatibility of three current bonding agents and calcium hydroxide cement. Sixty polyethylene tubes filled with the following materials: Group 1: Prime & Bond NT (PB - Dentsply, US; Group 2: Bond 1 (BO - Jeneric/Pentron, US); Group 3: Optibond Solo (OP - Kerr, US); and Group 4 (control): calcium hydroxide cement - Dycal (CH - Dentsply, US) were implanted into the connective tissue of 30 rats. After 15, 30 and 60 days, the implants were excised and the animals sacrificed. The biopsies were immersed in Karnovsky (pH, 7.2) fixative solution for 48 hours, and processed using routine histological technique. Six-micron-thick sections were cut and stained with hematoxilin and eosin and Masson's trichome technique. Microscopic evaluation was used to compare the connective tissue reactions caused by the experimental and control materials adjacent to the tube opening. At 15 days, the experimental and control materials triggered a moderate to intense inflammatory response which gave rise to a thick capsule adjacent to the tube opening. With time, the inflammatory reaction decreased. At 60 days, the connective tissue adjacent to the bonding agents exhibited a persistent inflammatory response mediated by macrophages and giant cells which were engulfing displaced resin components. on the other hand, for the control group (calcium hydroxide) no inflammatory response associated with a thin capsule adjacent to the material was observed even at the 30-day period. The hard-setting calcium hydroxide cement allowed complete healing and was considered more biocompatible than the bonding agents.

INFLUENCE of DIFFERENT SURFACE CONDITIONING PROTOCOLS on MICROTENSILE BOND STRENGTH of SELF-ADHESIVE RESIN CEMENTS TO DENTIN

Statement of problem. According to manufacturers, bonding with self-adhesive resin cements can be achieved without any pretreatment steps such as etching, priming, or bonding. However, the benefit of saving time with these simplified luting systems may be realized at the expense of compromising the bonding capacity.Purpose. The purpose of this study was to assess whether different dentin conditioning protocols influence the bond performance of self-adhesive resin cements to dentin.Material and methods. Flat dentin surfaces from 48 human molars were divided into 4 groups (n=12): 1) control, no conditioning; 2) H(3)PO(4), etching with 37% H(3)PO(4) for 15 seconds; 3) SEBond, bonding with self-etching primer adhesive (Clearfil SE Bond); and 4) EDTA, etching with 0.1M EDTA for 60 seconds. The specimens from each dentin pre-treatment were bonded using the self-adhesive cements RelyX Unicem, Maxcem or Multilink Sprint (n=4). The resin-cement-dentin specimens were stored in water at 37 degrees C for 7 days, and serially sectioned to produce beam specimens of 1.0 mm(2) cross-sectional area. Microtensile bond strength (mu TBS) testing was performed at 1.0 mm/min. Data (MPa) were analyzed by 2-way ANOVA and Tukey multiple comparisons test (alpha=.05). Fractured specimens were examined with a stereomicroscope (x40) and classified as adhesive, mixed, or cohesive. Additional bonded interfaces were evaluated under a scanning electron microscope (SEM).Results. Cement-dentin mu TBS was affected by the dentin conditioning approach (P <.001). RelyX Unicem attained statistically similar bond strengths to all pre-treated dentin surfaces. H(3)PO(4)-etching prior to the application of Maxcem resulted in bond strength values that were significantly higher than the other groups. The lowest mu TBS were attained when luting Multilink Sprint per manufacturers' recommendations, while H(3)PO(4)-etching produced the highest values followed by Clearfil SE bonding and EDTA. SEM observations disclosed an enhanced potential of the self-adhesive cements to form a hybrid layer when applied following manufacturer's instructions.Conclusions. When evaluated self-adhesive resin cements are used, selectively etching dentin with H(3)PO(4) prior to luting results in the most effective bonding. (J Prosthet Dent 2011;105:227-235)

H-bonding in entrapped water in poly(o-methoxyaniline): Results from a differential scanning calorimetry study

Differential scanning calorimetry (DSC) was used to investigate entrapped water in poly(o-methoxyaniline) (POMA) in powder form. Two endothermic peaks were attributed to removal of water molecules that were adsorbed with distinct energies. By obtaining thermograms at various heating rates, we succeeded in applying Kissinger's approaches to estimate activation energies for the water adsorbed. The values obtained were ca. 25 and 53 kJ/mol, which correspond to H-bonding interactions, probably at the amine and imine centers of POMA, respectively. (C) 2005 Elsevier B.V. All rights reserved.

Solderjet bumping technique used to manufacture a compact and robust green solid-state laser

Solder-joining using metallic solder alloys is an alternative to adhesive bonding. Laser-based soldering processes are especially well suited for the joining of optical components made of fragile and brittle materials such as glasses, ceramics and optical crystals due to a localized and minimized input of thermal energy. The Solderjet Bumping technique is used to assemble a miniaturized laser resonator in order to obtain higher robustness, wider thermal conductivity performance, higher vacuum and radiation compatibility, and better heat and long term stability compared with identical glued devices. The resulting assembled compact and robust green diode-pumped solid-state laser is part of the future Raman Laser Spectrometer designed for the Exomars European Space Agency (ESA) space mission 2018.

Spectrophotometric Evaluation Of Dental Bleaching Under Orthodontic Bracket In Enamel And Dentin.

Aware of the diffusion capacity of bleaching in the dental tissues, many orthodontists are subjecting their patients to dental bleaching during orthodontic treatment for esthetic purposes or to anticipate the exchange of esthetic restorations after the orthodontic treatment. For this purpose specific products have been developed in pre-loaded whitening trays designed to fit over and around brackets and wires, with clinical efficacy proven. The objective of this study was to evaluate, through spectrophotometric reflectance, the effectiveness of dental bleaching under orthodontic bracket. Thirty-two bovine incisors crown blocks of 8 mm x 8 mm height lengths were used. Staining of tooth blocks with black tea was performed for six days. They were distributed randomly into 4 groups (1-home bleaching with bracket, 2- home bleaching without bracket, 3- office bleaching with bracket, 4 office bleaching without bracket). The color evaluation was performed (CIE L * a * b *) using color reflectance spectrophotometer. Metal brackets were bonded in groups 1 and 3. The groups 1 and 2 samples were subjected to the carbamide peroxide at 15%, 4 hours daily for 21 days. Groups 3 and 4 were subjected to 3 in-office bleaching treatment sessions, hydrogen peroxide 38%. After removal of the brackets, the second color evaluation was performed in tooth block, difference between the area under the bracket and around it, and after 7 days to verified color stability. Data analysis was performed using the paired t-test and two-way variance analysis and Tukey's. The home bleaching technique proved to be more effective compared to the office bleaching. There was a significant difference between the margin and center color values of the specimens that were subjected to bracket bonding. The bracket bond presence affected the effectiveness of both the home and office bleaching treatments. Key words:Tooth bleaching, spectrophotometry, orthodontics.

Short-term in situ/ex vivo study of the anticariogenic potential of a resin-modified glass-ionomer cement associated with adhesive systems

Objective: As resin-modified glass-ionomer cement (RMGIC) is an adhesive material, its association to dentin bonding agents (DBAs) was previously proposed. This study investigated the adjunctive behavior of an RMGIC with etch-and-rinse bonding systems under in situ/ex vivo cariogenic challenge. Method and Materials: Bovine enamel blocks (3 3 2 mm) were randomly assigned to group VP, Vitremer + its own primer (3M ESPE); group VSB, Vitremer + Single Bond (3M ESPE); and group VPB, Vitremer + Prime & Bond 2.1 (Dentsply). Two blocks of each group were randomly placed in an acrylic palatal appliance, so each appliance included six blocks. Volunteers (n = 10) wore these appliances according to given instructions to promote a sucrose challenge eight times/day for 15 days. After this period, the blocks were removed from the devices and cleaned, and demineralization was assessed through longitudinal microhardness analysis (Knoop indenter, 25 g/5 s). Data were submitted to three-way ANOVA and Tukey test (P < .05). Results: No treatment was able to completely avoid demineralization. All materials showed a statistically significant difference in mineral loss when the microhardness on the outer enamel was compared with deeper regions (P < .05). Conclusion: Association of the tested RMGICs with etch-and-rinse DBAs did not seem to be more beneficial against caries than the conventional treatment with RMGIC. (Quintessence Int 2010; 41: e192-e199)

Interfacial evaluation of experimentally weakened roots restored with adhesive materials and fibre posts: An SEM analysis

Objectives: To evaluate the bonding interface in experimentally weakened roots reinforced with adhesive restorative materials and quartz fibre posts, varying the light-exposure time of the composite resin used for root reinforcement. Methods: Twelve extracted human maxillary incisors teeth were used. The crowns were removed and the roots were endodontically treated. After post space preparation, the roots were assigned to four groups. The thickness of the root dentine was reduced and adhesively restored with composite resin light-activated through a translucent fibre post for either 40 s (group 1), 80 s (group 2) or 120 s (group 3). In the case of control (group 4), the roots were not weakened. One day after post cementation, the specimens were sectioned transversally in three slices and processed for scanning electron microscopic analysis to observe bonding interface formation, quality of the hybrid layer and density of resin tags using a four-step scale method. Results: Formation of a hybrid layer and resin tags were evident in all groups. There was no statistically (p > 0.05) significant difference between the regions analysed in each group (Friedman test) and between groups in each section depth (Kruskal-Wallis test). Furthermore, comparison of the flared/reinforced groups showed that the different time;; used for composite resin cure did not affect the results significantly (Kruskal-Wallis test, p = 0.2139). Conclusions: Different light-exposure times used for composite resin polymerisation during root canal reinforcement did not affect significantly the formation and quality of the dentine/adhesive/composite resin bonding interface. (C) 2008 Elsevier Ltd. All rights reserved.

Cartografando movimentos curriculares produzidos nas redes de conversações nos encontrosformações do PROEJA/IFES/ES

Problematiza a constituição do currículo (e da “formação docente” no campo curricular), no cotidiano escolar, na dimensão das conversações. Objetiva acompanhar os movimentos curriculares concernentes ao Proeja entre formas e forças complexas no cotidiano do Ifes – campus Venda Nova do Imigrante (VNI). Compõe com as linhas de pensamentos principalmente de Alves (2008, 2010, 2012); Carvalho (2004, 2008a, 2008b, 2009, 2012); Deleuze (1988, 2002, 2010); Deleuze e Guattari (1995); Ferraço (2007, 2008a, 2008b); Garcia (2011); Guattari (1987, 2004, 2012); Kastrup (2009, 2013); Lopes e Macedo (2011); Lopes (2010, 2011); Oliveira (2005, 2009, 2012); Paiva (2004, 2009); Rolnik (1989); e Spinoza (2013), entremeando os conceitos de movimentos e afetos no campo do currículo em redes na relação híbrida com os encontros-formações docente do/no Proeja. Adota a (não) metodologia cartográfica ao acompanhar movimentos curriculares (des)(re)territorializantes nas redes de conversações, especialmente nos encontrosformações: “Rodas de conversas com professores e demais servidores do Proeja”. Utiliza como principais instrumentos metodológicos a observação participante, a gravação das vozes e o registro em diário de campo. Contribui para outros movimentos de pesquisa ao capturar produzir e analisar dados em que se percebe que: ainda que tenha ocorrido um planejamento coletivo, outras temáticas surgiram nos encontros formações (que não se pretendiam engessados e não objetivavam a paralisação dos fluxos que pedem passagem), e tais assuntos puderam ser usados como disparadores para criação de outros movimentos curriculares; as concepções dos professores sobre a “dificuldade/facilidade” em ministrar aulas para o Proeja e os lugares estabelecidos entre estudantes e docentes no processo ensino-aprendizagem não estão relacionados diretamente, em relação de causa e efeito, à disciplina/área de conhecimento específica que ministram, mas aos agenciamentos, aos ligamentos e às rupturas produzidas nas relações com essas redes de saberes fazeres poderes que envolvem múltiplos agentes: docentes, outros servidores, alunos, experiências e encontros múltiplos dentro fora no espaço tempo do Ifes; uma tríade-refrão coopera para a criação de uma fôrma triangular que enfatiza a noção de um padrão em um processo molar enraizado nas árvores do conhecimento: perfil, seleção e nivelamento, contudo, algumas linhas de fuga dissonantes são criadas por entre as fissuras dos pretensos tons harmônicos; as frases “os professores do IF não estão preparados para ministrar aulas para o Proeja” ou “não há formação/qualificação para os docentes se relacionarem com o Proeja” são utilizadas, em alguns discursos, como escudos-argumentos para a opção-política de não oferta de vagas para a modalidade EJA em composição com fios que afirmam tal especificidade da educação básica, dentro da rede federal, como um “favor social”; processos que envolvem a (des)organização da matriz curricular são considerados por alguns participantes como início, “produto” e objetivo das conversas curriculares e provocam tensões que (i)mobilizam, (não) movimentam entre os afetos dos corpos, podendo levar à (não) ação coletiva; a noção de “mercado de trabalho” ainda impera nos discursos, ciclicamente, enquanto início fim das problematizações do currículo do Ensino Médio e da EJA; a expressão “integração curricular” é constantemente usada nos discursos que circulam o campus, no entanto, os sentidos produzidos, as concepções e as teorias curriculares que embasam a noção de “integração” no currículo são bem diversos; não há totalidades nos discursos, não há homogeneização, não foi efetivada nenhuma coesão/única voz representante (e esse também não era o objetivo desta pesquisa); ainda que o tema da roda se propusesse às conversas curriculares do/no Proeja, nesses encontros, os participantes manifestaram a necessidade de intensificar os movimentos produzidos nas rodas visando à discussão dos currículos textos de todos os cursos e modalidades ofertados pelos campus VNI e na intensificação de espaços para trocas de experiências curriculares cotidianas; na potencialização das diferenças como possibilidades de inventividade nos encontros-formações docente e nas danças curriculares que envolvem diversas relações de aprendizagem no Ifes, algumas experimentações foram produzidas, entre afetos, criando composições(des)(re)territorializantes e ressonando com movimentos que não se restringiram às rodas de conversas, contudo, enredaram-se em fios de outros espaços tempos do campus em tentativas de propagações de currículos multidão.

Shear strength of adhesively bonded polyolefins with minimal surface preparation

Interest in polyethylene and polypropylene bonding has increased in the last years. However, adhesive joints with adherends which are of low surface energy and which are chemically inert present several difficulties. Generally, their high degree of chemical resistance to solvents and dissimilar solubility parameters limit the usefulness of solvent bonding as a viable assembly technique. One successful approach to adhesive bonding of these materials involves proper selection of surface pre-treatment prior to bonding. With the correct pre-treatment it is possible to glue these materials with one or more of several adhesives required by the applications involved. A second approach is the use of adhesives without surface pre-treatment, such as hot melts, high tack pressure-sensitive adhesives, solvent-based specialty adhesives and, more recently, structural acrylic adhesives as such 3M DP-8005® and Loctite 3030®. In this paper, the shear strengths of two acrylic adhesives were evaluated using the lap shear test method ASTM D3163 and the block shear test method ASTM D4501. Two different industrial polyolefins (polyethylene and polypropylene) were used for adherends. However, the focus of this study was to measure the shear strength of polyethylene joints with acrylic adhesives. The effect of abrasion was also studied. Some test specimens were manually abraded using 180 and 320 grade abrasive paper. An additional goal of this work was to examine the effect of temperature and moisture on mechanical strength of adhesive joints.

Fathers’ emotional involvement with the neonate: impact of the umbilical cord cutting experience

Aims. This paper is a report on a study analysing the effect of the umbilical cord cutting experience on fathers’ emotional involvement with their infants. Background. Participation in childbirth offers an opportunity for father and mother to share the childbirth experience, so it is vital that midwives improve the fathers’ participation in this event. Design. A quasi-experimental study with a quantitative methodology was implemented. Methods. One hundred and five fathers were recruited as part of a convenience sample in a Maternity Public Hospital in a Metropolitan City in Portugal, between January and May of 2008. The Bonding Scale, the Portuguese version of the ‘Mother-to-Infant Bonding Scale’ was used to evaluate the fathers’ emotional involvement with the neonate at different moments: before childbirth, first day after childbirth and first month after childbirth. After childbirth, the fathers were divided into three separate groups depending on their umbilical cord cutting experience. Results. The results demonstrate that the emotional involvement between father and child tends to increase during the first days after childbirth and to decrease when evaluated 1 month after birth, for fathers who did not cut the umbilical cord. However, fathers who cut the umbilical cord demonstrate an improvement in emotional involvement 1 month later. Conclusion. Results suggest that the umbilical cord cutting experience benefits the father’s emotional involvement with the neonate, supporting the benefits of his participation and empowerment in childbirth.