Alternative phosphorus sources for formulated fish feed

An experiment was conducted to evaluate the possibility of using inorganic fertilizer triple super phosphate (TSP), inorganic fertilizer 16:20 (a 16:20 grade fertilizer contains 16 percent N and 20 percent P20 5), rice-bran and duck-manure as phosphorus sources in formulated fish feed for Nile tilapia ( Oreochromis niloticus). Experiment was conducted for a period of 2 months in net-cages suspended in fertilized earthen ponds and all male sex-reversed Nile tilapia (9.39- 10.37 g) were used in the experiment. Seven treatments including one non-feed treatment were used in this experiment. Treatment 1 (non-feed), treatment 2 (-P) where fish fed with phosphorus non-supplemented diet acted as control 1 and treatment 3, 4, 5, 6 and 7 where fish fed with 3% di-calcium phosphate (DCP), 3% triple supper phosphate (TSP), 7% 16:20 inorganic fertilizer, 30% rice-bran and 30% duck-manure supplemented diet, respectively. Results showed that the TSP and 16:20 grade inorganic fertilizer supplementation in diets as phosphorus sources were equivalent to DCP (Di-calcium phosphate) supplementation in terms of growth performance, feed utilization efficiency and final body composition of Nile tilapia. Ricebran and duck-manure were not found as good phosphorus sources.

Physiological advantages may contribute to successful invasion of the exotic Cyprinus carpio into the Xingyun Lake, China

Feeding and growth traits of Cyprinus carpio and Cyprinus pellegrini (both at age-0) were compared in three experiment, in an attempt to analyze potential causes for the displacement of the native C. pellegrini in the Xingyun Lake, Yuxi, Yunan, China. Experiment I was conducted in water which fluctuated between 15 and 20 degrees C. Experiment II and III were conducted in a laboratory and water temperature was maintained between 20 degrees C and 25 degrees C, respectively. Three common trends were noted for all three experiments: (1) feeding rate of C. carpio was lower than that of C. pellegrini, and this difference was found to be significant in experiment I; (2) growth rate of C. carpio was higher than C. pellegrini, and the difference was found to be significant in experiment II; (3) food conversion efficiency and energy retention efficiency for C. carpio were higher than those of C. pellegrini, and significant differences were noted in experiment I and II. Since the growth period for fish in the Xingyun Lake generally occurs when water temperatures are between 15 and 25 degrees C, it can be suggested that C. carpio has advantages over C. pellegrini in growth and food utilization efficiency, and lower food consumption than C. pellegrini. These physiological traits of C. carpio might allow this species to be more resistant to food shortage and predation, and may be partially responsible for the displacement of C. pellegrini by C. carpio.

Zingiber officinalis an herbal appetizer in the tiger shrimp Penaeus monodon (Fabricius) larviculture

Penaeus monodon postlarvae were fed with different percentages (0%, 25%, 50%, 75% and 100%) of the herbal appetizer Zingiber officinalis enriched Artemia. After 30 days of culture (i.e. PL-1-30), a very positive result was found in Z. officinalis-enriched Artemia-fed postlarvae. The unenriched Artemia-fed postlarvae consumed 91.0 mg/animal/30 days of feed, whereas the Z. officinalis-enriched Artemia increased their consumption to 127.9 mg/animal/30 days. A similar pattern was noticed in feed absorbed (110.2 mg), dry weight growth (26.7 mg) and feed catabolized (83.2 mg) in Z. officinalis-enriched Artemia because of enzymatic activities. The conversion efficiency of unenriched postlarva was 17.19%, whereas in 100% Z. officinalis-enriched Artemia, the maximum conversion efficiency was 20.85%. The net production efficiency increased significantly (P < 0.05) to 22% from that of the unenriched Artemia-fed postlarvae. The administration of Z. officinalis in all levels produced significantly (P < 0.05) higher weight gain and specific growth rate. The utilization efficiency of feed increased proportionately to the percentages of Z. officinalis. Digestive enzyme activity (amylase, protease and lipase) increased significantly (P < 0.05) in the 50%, 75% and 100% enrichment. Among the different percentages of enrichment, the 100% Z. officinalis-enriched Artemia-fed postlarvae performed better in the overall status.

旱地土壤硝态氮与氮素平衡、氮肥利用的关系

利用长期肥料试验资料研究了土壤氮素平衡、氮肥利用率和土壤硝态氮之间的相互关系。结果表明,小麦不同施肥处理的氮肥利用率(NUE)为30.9%～65.8%,平均53.6%;土壤硝态氮累积率为2.3%～44.1%,平均13.2%;氮素表观损失率25.0%～42.7%,平均33.2%。一般情况下,氮素盈余值与氮肥用量呈正相关,与磷肥用量呈负相关;土壤中硝态氮的数量与氮素盈余值呈正比,与氮肥利用率呈反比。黄土旱塬地区,小麦在经济合理施氮条件下,氮素盈余值为13.79 kg/hm~2,硝态氮累积量为23.00 kg/hm~2,说明过量施用一定数量的氮肥对保持作物生产力和土壤氮素营养是必要的。

不同水肥条件对马铃薯肥料N利用率的影响

在旱棚控制条件下 ,用五因素五水平二次回归正交旋转组合设计 ,研究了水肥施用分配 ,补水量 ,施N量 ,施K量 ,有机肥施用量的综合作用效应 .结果表明 ,五因素对肥料N利用率的作用顺序为施N量 >补水量>水肥施用分配 >有机肥施用量 >施K量 .水肥施用分配相对于不同水、化肥 (N、K )、有机肥量的选择 ,可以大大地提高肥料N利用率 ;量少应重前施用 ,量多重后施或均施为好 .补水量与施N量的耦合规律为 :高水高肥效果最佳 ,肥料N利用率可达 5 7 83 % ,中水中N及低水低N次之 ,为 2 9 17%～ 40 99% ;高水低N或低水高N导致最低的利用率 ,为 2 2 87%或 2 2 5 1%

论窖灌农业中水窖的配置模式与窖水高效利用技术

针对黄土高原蓬勃发展的窖灌农业 ,提出3种水窖配置模式 :峁顶光头式 ;路旁葡萄串式和场、院、凹地单点式。为了高效利用水窖集蓄的雨水资源 ,文中推荐自压微灌、外动力加压微灌、坑灌和水肥穴灌等4种窖水高效利用技术。

Improvement of direct methanol fuel cell performance by modifying catalyst coated membrane structure

A five-layer catalyst coated membrane (CCM) based upon Nation 115 membrane for direct methanol fuel cell (DMFC) was designed and fabricated by introducing a modified Nafion layer between the membrane and the catalyst layer. The properties of the CCM were determined by SEM, cyclic voltammetry, impedance spectroscopy, ruinous test and I-V curves. The characterizations show that the modified Nation layers provide increased interface contact area and enhanced interaction between the membrane and the catalyst layer. As a result, higher Pt utilization, lower contact resistance and superior durability of membrane electrode assembly was achieved. A 75% Pt utilization efficiency was obtained by using the novel CCM structure, whereas the conventional structure gave 60% efficiency. All these features greatly contribute to the increase in DMFC performance. The DMFC with new CCM structure presented a maximum power density of 260 MW cm(-2), but the DMFC with conventional structure gave only 200 mW cm(-2) under the same operation condition. (c) 2005 Elsevier B.V. All rights reserved.

Implementation and Evaluation of Measurement-Based Admission Control Schemes Within a Converged Networks QoS Management Framework

Policy-based network management (PBNM) paradigms provide an effective tool for end-to-end resource
management in converged next generation networks by enabling unified, adaptive and scalable solutions
that integrate and co-ordinate diverse resource management mechanisms associated with heterogeneous
access technologies. In our project, a PBNM framework for end-to-end QoS management in converged
networks is being developed. The framework consists of distributed functional entities managed within a
policy-based infrastructure to provide QoS and resource management in converged networks. Within any
QoS control framework, an effective admission control scheme is essential for maintaining the QoS of
flows present in the network. Measurement based admission control (MBAC) and parameter basedadmission control (PBAC) are two commonly used approaches. This paper presents the implementationand analysis of various measurement-based admission control schemes developed within a Java-based
prototype of our policy-based framework. The evaluation is made with real traffic flows on a Linux-based experimental testbed where the current prototype is deployed. Our results show that unlike with classic MBAC or PBAC only schemes, a hybrid approach that combines both methods can simultaneously result in improved admission control and network utilization efficiency

Stable Isolated Metal Atoms as Active Sites for Photocatalytic Hydrogen Evolution

The process of using solar energy to split water to produce hydrogen assisted by an inorganic semiconductor is crucial for solving our energy crisis and environmental problems in the future. However, most semiconductor photocatalysts would not exhibit excellent photocatalytic activity without loading suitable co-catalysts. Generally, the noble metals have been widely applied as co-catalysts, but always agglomerate during the loading process or photocatalytic reaction. Therefore, the utilization efficiency of the noble co-catalysts is still very low on a per metal atom basis if no obvious size effect exists, because heterogeneous catalytic reactions occur on the surface active atoms. Here, for the first time, we have synthesized isolated metal atoms (Pt, Pd, Rh, or Ru) stably by anchoring on TiO2, a model photocatalystic system, by a facile one-step method. The isolated metal atom based photocatalysts show excellent stability for H-2 evolution and can lead to a 6-13-fold increase in photocatalytic activity over the metal clusters loaded on TiO2 by the traditional method. Furthermore, the configurations of isolated atoms as well as the originality of their unusual stability were analyzed by a collaborative work from both experiments and theoretical calculations.

Qualitative Air Flow Modelling and Analysis of Data Centre Air Conditioning as Multiple Jet Array

Data centre is a centralized repository,either physical or virtual,for the storage,management and dissemination of data and information organized around a particular body and nerve centre of the present IT revolution.Data centre are expected to serve uniinterruptedly round the year enabling them to perform their functions,it consumes enormous energy in the present scenario.Tremendous growth in the demand from IT Industry made it customary to develop newer technologies for the better operation of data centre.Energy conservation activities in data centre mainly concentrate on the air conditioning system since it is the major mechanical sub-system which consumes considerable share of the total power consumption of the data centre.The data centre energy matrix is best represented by power utilization efficiency(PUE),which is defined as the ratio of the total facility power to the IT equipment power.Its value will be greater than one and a large value of PUE indicates that the sub-systems draw more power from the facility and the performance of the data will be poor from the stand point of energy conservation. PUE values of 1.4 to 1.6 are acievable by proper design and management techniques.Optimizing the air conditioning systems brings enormous opportunity in bringing down the PUE value.The air conditioning system can be optimized by two approaches namely,thermal management and air flow management.thermal management systems are now introduced by some companies but they are highly sophisticated and costly and do not catch much attention in the thumb rules.

Heterotic and seed rate effects on nitrogen efficiencies in wheat

Four field experiments over 2 years investigated whether wheat hybrids had higher nitrogen-use efficiency (NUE) than their parents over a range of seed rates and different N regimes. There was little heterosis for total N in the above-ground biomass (NYt), but there was high-parent heterosis for grain N yields (NYg) in two of the hybrids, Hyno Esta and Hyno Rista, associated with greater nitrogen harvest index (NHI). Overall, the hybrids did not significantly increase the total dry matter produced per unit N in the above-ground crop (NUtE(t)), but did increase the grain dry matter per unit N in the above ground crop (NUtE(g)). The improvement in NUtE(g) was at the partial detriment of grain N concentration. Heterosis for grain NYg in Hyno Esta was lower at zero-N, suggesting that it did not achieve higher yields through more efficient capture or utilization of N. The greater NHI in Hyno Esta appeared to be facilitated by both greater N uptake, and remobilization of N from vegetative tissues, after anthesis. The response of N efficiency and uptake to seed rate was dependent on N supply and season. Where N fertilizer was applied, N uptake over time was slower at the lower seed rates, but where N was withheld N capture at the lowest seed rate soon approached the N capture of the higher seed rates. During grain filling, the rate of accumulation of N into the grain increased with seed rate and the duration of N accumulation decreased with seed rate. With N applied, N yields increased to all asymptote with seed rate, when N was withheld there was little response of N yields to seed rate. In 2002, N utilization efficiency (NUtE(t) and NUtE(g)) also increased asymptotically with seed rate, but in 2003 seed rate had little effect on N utilization efficiency. When nitrogen fertilizer had not been applied, NHI consistently decreased with increasing seed rate. The timing of N application made little difference to NUE, NY, or NUtE.

Prediction of nutrient digestibility and energy concentrations in fresh grass using nutrient composition

Improved nutrient utilization efficiency is strongly related to enhanced economic performance and reduced environmental footprint of dairy farms. Pasture-based systems are widely used for dairy production in certain areas of the world, but prediction equations of fresh grass nutritive value (nutrient digestibility and energy concentrations) are limited. Equations to predict digestible energy (DE) and metabolizable energy (ME) used for grazing cattle have been either developed with cattle fed conserved forage and concentrate diets or sheep fed previously frozen grass, and the majority of them require measurements less commonly available to producers, such as nutrient digestibility. The aim of the present study was therefore to develop prediction equations more suitable to grazing cattle for nutrient digestibility and energy concentrations, which are routinely available at farm level by using grass nutrient contents as predictors. A study with 33 nonpregnant, nonlactating cows fed solely fresh-cut grass at maintenance energy level for 50 wk was carried out over 3 consecutive grazing seasons. Freshly harvested grass of 3 cuts (primary growth and first and second regrowth), 9 fertilizer input levels, and contrasting stage of maturity (3 to 9 wk after harvest) was used, thus ensuring a wide representation of nutritional quality. As a result, a large variation existed in digestibility of dry matter (0.642-0.900) and digestible organic matter in dry matter (0.636-0.851) and in concentrations of DE (11.8-16.7 MJ/kg of dry matter) and ME (9.0-14.1 MJ/kg of dry matter). Nutrient digestibilities and DE and ME concentrations were negatively related to grass neutral detergent fiber (NDF) and acid detergent fiber (ADF) contents but positively related to nitrogen (N), gross energy, and ether extract (EE) contents. For each predicted variable (nutrient digestibilities or energy concentrations), different combinations of predictors (grass chemical composition) were found to be significant and increase the explained variation. For example, relatively higher R(2) values were found for prediction of N digestibility using N and EE as predictors; gross-energy digestibility using EE, NDF, ADF, and ash; NDF, ADF, and organic matter digestibilities using N, water-soluble carbohydrates, EE, and NDF; digestible organic matter in dry matter using water-soluble carbohydrates, EE, NDF, and ADF; DE concentration using gross energy, EE, NDF, ADF, and ash; and ME concentration using N, EE, ADF, and ash. Equations presented may allow a relatively quick and easy prediction of grass quality and, hence, better grazing utilization on commercial and research farms, where nutrient composition falls within the range assessed in the current study.

Equações de predição das exigências protéicas para frangos de corte

O objetivo do trabalho foi determinar equações de predição das exigências de proteína bruta (PB) para frangos de corte machos e fêmeas através do método fatorial. Na determinação das exigências de proteína bruta para mantença, foi utilizada a técnica do balanço de nitrogênio. As exigências de proteína bruta para o crescimento foram determinadas em função do conteúdo de nitrogênio na carcaça e a eficiência de utilização do nitrogênio da dieta. A partir dos valores das exigências para mantença e para crescimento foram elaboradas equações de predição para as exigências diárias de PB (g/ ave/ dia) para frangos de corte machos (7 a 21 dias - PB = 1,323xP0,75 + 0,256xG, 22 a 42 dias - PB = 1,323xP0,75 + 0,277xG e 43 a 56 dias - PB = 1,323xP0,75 + 0,283xG) e fêmeas (7 a 21 dias - PB = 1,748xP0,75 + 0,258xG, 22 a 42 dias - PB = 1,748xP0,75 + 0,274xG, e 43 a 56 dias - PB = 1,748xP0,75 + 0,300xG), em que P = peso corporal (kg) e G = ganho de peso diário (g/dia). Recomenda-se a utilização das equações para a determinação das exigências mínimas de nitrogênio ou proteína bruta somente com atenção no atendimento das exigências em aminoácidos.

Modelos para estimar as exigências de energia metabolizável para poedeiras

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Analysis of a molten carbonate fuel cell: cogeneration to produce electricity and cold water

The fuel cell is an emerging cogeneration technology that has been applied successfully in Japan, the USA and some countries in the European Union. This system performs direct conversion of the chemical energy of the oxidation of hydrogen from fuel with atmospheric oxygen into direct current electricity and waste heat via an electrochemical process relying on the use of different electrolytes (phosphoric acid, molten carbonate and solid oxide, depending on operating temperature). This technology permits the recovery of waste heat, available from 200 degreesC up to 1000 degreesC depending on the electrolyte technology, which can be used in the production of steam, hot or cold water, or hot or cold air, depending on the associated recuperation equipment. In this paper, an energy, exergy and economic analysis of a fuel cell cogeneration system (FCCS) is presented. The FCCS is applied in a segment of the tertiary sector to show that it is a feasible alternative for rational decentralized energy production under Brazilian conditions. The technoeconomic analysis shows a global efficiency or fuel utilization efficiency of 86%. Analysis shows that the exergy losses in the fuel cell unit and the absorption refrigeration system are significant. Furthermore, the payback period estimated is about 3 and 5 years for investments in fuel cells of 1000 and 1500 US$/kW, respectively. (C) 2001 Elsevier B.V. Ltd. All rights reserved.