THE DESIGN OF A POWER SYSTEM FOR A WIRELESS SENSOR NETWORK FOR LONG-TERM OPERATION

Wireless sensor networks (WSNs) have shown wide applicability to many fields including monitoring of environmental, civil, and industrial settings. WSNs however are resource constrained by many competing factors that span their hardware, software, and networking. One of the central resource constrains is the charge consumption of WSN nodes. With finite energy supplies, low charge consumption is needed to ensure long lifetimes and success of WSNs. This thesis details the design of a power system to support long-term operation of WSNs. The power system’s development occurs in parallel with a custom WSN from the Queen’s MEMS Lab (QML-WSN), with the goal of supporting a 1+ year lifetime without sacrificing functionality. The final power system design utilizes a TPS62740 DC-DC converter with AA alkaline batteries to efficiently supply the nodes while providing battery monitoring functionality and an expansion slot for future development. Testing tools for measuring current draw and charge consumption were created along with analysis and processing software. Through their use charge consumption of the power system was drastically lowered and issues in QML-WSN were identified and resolved including the proper shutdown of accelerometers, and incorrect microcontroller unit (MCU) power pin connection. Controlled current profiling revealed unexpected behaviour of nodes and detailed current-voltage relationships. These relationships were utilized with a lifetime projection model to estimate a lifetime between 521-551 days, depending on the mode of operation. The power system and QML-WSN were tested over a long term trial lasting 272+ days in an industrial testbed to monitor an air compressor pump. Environmental factors were found to influence the behaviour of nodes leading to increased charge consumption, while a node in an office setting was still operating at the conclusion of the trail. This agrees with the lifetime projection and gives a strong indication that a 1+ year lifetime is achievable. Additionally, a light-weight charge consumption model was developed which allows charge consumption information of nodes in a distributed WSN to be monitored. This model was tested in a laboratory setting demonstrating +95% accuracy for high packet reception rate WSNs across varying data rates, battery supply capacities, and runtimes up to full battery depletion.

THE DESIGN OF A POWER SYSTEM FOR A WIRELESS SENSOR NETWORK FOR LONG-TERM OPERATION

Wireless sensor networks (WSNs) have shown wide applicability to many fields including monitoring of environmental, civil, and industrial settings. WSNs however are resource constrained by many competing factors that span their hardware, software, and networking. One of the central resource constrains is the charge consumption of WSN nodes. With finite energy supplies, low charge consumption is needed to ensure long lifetimes and success of WSNs. This thesis details the design of a power system to support long-term operation of WSNs. The power system’s development occurs in parallel with a custom WSN from the Queen’s MEMS Lab (QML-WSN), with the goal of supporting a 1+ year lifetime without sacrificing functionality. The final power system design utilizes a TPS62740 DC-DC converter with AA alkaline batteries to efficiently supply the nodes while providing battery monitoring functionality and an expansion slot for future development. Testing tools for measuring current draw and charge consumption were created along with analysis and processing software. Through their use charge consumption of the power system was drastically lowered and issues in QML-WSN were identified and resolved including the proper shutdown of accelerometers, and incorrect microcontroller unit (MCU) power pin connection. Controlled current profiling revealed unexpected behaviour of nodes and detailed current-voltage relationships. These relationships were utilized with a lifetime projection model to estimate a lifetime between 521-551 days, depending on the mode of operation. The power system and QML-WSN were tested over a long term trial lasting 272+ days in an industrial testbed to monitor an air compressor pump. Environmental factors were found to influence the behaviour of nodes leading to increased charge consumption, while a node in an office setting was still operating at the conclusion of the trail. This agrees with the lifetime projection and gives a strong indication that a 1+ year lifetime is achievable. Additionally, a light-weight charge consumption model was developed which allows charge consumption information of nodes in a distributed WSN to be monitored. This model was tested in a laboratory setting demonstrating +95% accuracy for high packet reception rate WSNs across varying data rates, battery supply capacities, and runtimes up to full battery depletion.

Tools for testing the Solvency Capital Requirement for life insurance

Longevity risk is one of the major risks that an insurance company or a pension fund has to deal with and it is expected that its importance will grow in the near future. In agreement with these considerations, in Solvency II regulation the Standard formula furnished for calculating the Solvency Capital Requirement explicitly considers this kind of risk. According to the new European rules in our paper we suggest a multiperiod approach to evaluate the SCR for longevity risk. We propose a backtesting framework for measuring the consistency of SCR calculations for life insurance policies.

Cardiac Troponin Specific Autoantibodies: Analytical Tools for Exploring Their Impact on Cardiac Troponin I Testing

Cardiac troponin (cTn) I and T are the recommended biomarkers for the diagnosis and risk stratification of patients with suspected acute coronary syndrome (ACS), a major cause of cardiovascular death and disability worldwide. It has recently been demonstrated that cTn-specific autoantibodies (cTnAAb) can negatively interfere with cTnI detection by immunoassays to the extent that cTnAAb-positive patients may be falsely designated as cTnI-negative. The aim of this thesis was to develop and optimize immunoassays for the detection of both cTnI and cTnAAb, which would eventually enable exploring the clinical impact of these autoantibodies on cTnI testing and subsequent patient management. The extent of cTnAAb interference in different cTnI assay configurations and the molecular characteristics of cTnAAbs were investigated in publications I and II, respectively. The findings showed that cTnI midfragment targeting immunoassays used predominantly in clinical practice are affected by cTnAAb interference which can be circumvented by using a novel 3+1-type assay design with three capture antibodies against the N-terminus, midfragment and C-terminus and one tracer antibody against the C-terminus. The use of this assay configuration was further supported by the epitope specificity study, which showed that although the midfragment is most commonly targeted by cTnAAbs, the interference basically encompasses the whole molecule, and there may be remarkable individual variation at the affected sites. In publications III and IV, all the data obtained in previous studies were utilized to develop an improved version of an existing cTnAAb assay and a sensitive cTnI assay free of this specific analytical interference. The results of the thesis showed that approximately one in 10 patients with suspected ACS have detectable amounts of cTnAAbs in their circulation and that cTnAAbs can inhibit cTnI determination when targeted against the binding sites of assay antibodies used in its immunological detection. In the light of these observations, the risk of clinical misclassification caused by the presence of cTnAAbs remains a valid and reasonable concern. Because the titers, affinities and epitope specificities of cTnAAbs and the concentration of endogenous cTnI determine the final effect of circulating cTnAAbs, appropriately sized studies on their clinical significance are warranted. The new cTnI and cTnAAb assays could serve as analytical tools for establishing the impact of cTnAAbs on cTnI testing and also for unraveling the etiology of cTn-related autoimmune responses.

Ict security: Testing methodology for targeted attack defence tools

La tesi di laurea presentata si inserisce nell’ampio contesto della Sicurezza Informatica, in particolare tratta il problema del testing dei sistemi di sicurezza concepiti per contrapporsi alle odierne minacce: gli attacchi mirati (Targeted Attacks) ed in generale le minacce avanzate persistenti (Advanced Persistent Threats). Il principale obiettivo del lavoro svolto è lo sviluppo e la discussione di una metodologia di test per sistemi di sicurezza focalizzati su questo genere di problemi. Le linee guida proposte hanno lo scopo di aiutare a colmare il divario tra quello che viene testato e quello che in realt`a deve essere affrontato realmente. Le attività svolte durante la preparazione della tesi sono state sia di tipo teorico, per quanto concerne lo sviluppo di una metodologia per affrontare al meglio il testing di sistemi di sicurezza a fronte di attacchi mirati, che ne di tipo sperimentale in quanto si sono utilizzati tali concetti per lo svolgimento di test su più strumenti di difesa in uno scenario d’interesse reale.

Investigating human audio-visual object perception with a combination of hypothesis-generating and hypothesis-testing fMRI analysis tools

Primate multisensory object perception involves distributed brain regions. To investigate the network character of these regions of the human brain, we applied data-driven group spatial independent component analysis (ICA) to a functional magnetic resonance imaging (fMRI) data set acquired during a passive audio-visual (AV) experiment with common object stimuli. We labeled three group-level independent component (IC) maps as auditory (A), visual (V), and AV, based on their spatial layouts and activation time courses. The overlap between these IC maps served as definition of a distributed network of multisensory candidate regions including superior temporal, ventral occipito-temporal, posterior parietal and prefrontal regions. During an independent second fMRI experiment, we explicitly tested their involvement in AV integration. Activations in nine out of these twelve regions met the max-criterion (A < AV > V) for multisensory integration. Comparison of this approach with a general linear model-based region-of-interest definition revealed its complementary value for multisensory neuroimaging. In conclusion, we estimated functional networks of uni- and multisensory functional connectivity from one dataset and validated their functional roles in an independent dataset. These findings demonstrate the particular value of ICA for multisensory neuroimaging research and using independent datasets to test hypotheses generated from a data-driven analysis.

Radford's cyclopedia of cement construction; a general reference work on up-to-date practice in the manufacture and testing of cements; the selection of concreting materials, tools, and machinery; the proportioning, mixing, and depositing of concrete, and its application to all types and reinforced; together with analysis of the principles of constructive design, cost estimating, and the allied branches of stone and brick masonry and steel construction; based on the practical experience of a large staff of experts in actual construction work ...

"Prepared under the supervision of William A. Radford, editor-in-chief ... Alfred Sidney Johnson ... editor in charge."

Ultrasound, eddy current and magnetic Barkhausen noise as tools for sigma phase detection on a UNS S31803 duplex stainless steel

Sigma phase is a deleterious one which can be formed in duplex stainless steels during heat treatment or welding. Aiming to accompany this transformation, ferrite and sigma percentage and hardness were measured on samples of a UNS S31803 duplex stainless steel submitted to heat treatment. These results were compared to measurements obtained from ultrasound and eddy current techniques, i.e., velocity and impedance, respectively. Additionally, backscattered signals produced by wave propagation were acquired during ultrasonic inspection as well as magnetic Barkhausen noise during magnetic inspection. Both signal types were processed via a combination of detrended-fluctuation analysis (DFA) and principal component analysis (PCA). The techniques used were proven to be sensitive to changes in samples related to sigma phase formation due to heat treatment. Furthermore, there is an advantage using these methods since they are nondestructive. (C) 2010 Elsevier B.V. All rights reserved.

Skin-derived cell-sheets as powerful tools to engineer skin analogues

Cell/cell-extracellular matrix (ECM) dynamic interactions appear to have a major role in regulating communication through soluble signaling, directing cell binding and activating substrates that participate in the highly organized wound healing process. Moreover, these interactions are also crucial for in vitro mimicking cutaneous physiology. Herein we explore cell sheet (CS) engineering to create cellular constructs formed by keratinocytes (hKC), fibroblasts (hDFB) and dermal microvascular endothelial cells (hDMEC), to target skin wound healing but also the in vitro recreation of relevant models. Taking advantage of temperature-responsive culture surfaces, which allow harvesting cultured cells as intact sheets along with the deposited native ECM, varied combinations of homotypic and heterotypic three-dimensional (3-D) CS-based constructs were developed. Constructs combining one CS of keratinocytes as an epidermis-like layer plus a vascularized dermis composed by hDFB and hDMECs were assembled as skin analogues for advancing in vitro testing. Simultaneously both hKC and hDMEC were shown to significantly contribute to the re-epithelialization of full-thickness mice skin wounds by promoting an early epithelial coverage, while hDMEC significantly lead to increased vessels density, incorporating the neovasculature. Thus, although determined by the cellular nature of the constructs, these outcomes demonstrated that CS engineering appear as an unique technology that open the possibility to create numerous combinations of 3D constructs to target defective wound healing as well as the construction of in vitro models to further mimic cutaneous functions crucial for drug screening and cosmetic testing assays.

Testing advances in molecular discrimination among Chinook salmon life histories: evidence from a blind test.

The application of DNA-based markers toward the task of discriminating among alternate salmon runs has evolved in accordance with ongoing genomic developments and increasingly has enabled resolution of which genetic markers associate with important life-history differences. Accurate and efficient identification of the most likely origin for salmon encountered during ocean fisheries, or at salvage from fresh water diversion and monitoring facilities, has far-reaching consequences for improving measures for management, restoration and conservation. Near-real-time provision of high-resolution identity information enables prompt response to changes in encounter rates. We thus continue to develop new tools to provide the greatest statistical power for run identification. As a proof of concept for genetic identification improvements, we conducted simulation and blind tests for 623 known-origin Chinook salmon (Oncorhynchus tshawytscha) to compare and contrast the accuracy of different population sampling baselines and microsatellite loci panels. This test included 35 microsatellite loci (1266 alleles), some known to be associated with specific coding regions of functional significance, such as the circadian rhythm cryptochrome genes, and others not known to be associated with any functional importance. The identification of fall run with unprecedented accuracy was demonstrated. Overall, the top performing panel and baseline (HMSC21) were predicted to have a success rate of 98%, but the blind-test success rate was 84%. Findings for bias or non-bias are discussed to target primary areas for further research and resolution.

A method for testing the host specificity of ectoparasites: give them the opportunity to choose

Host-choice experiments were carried out with rodent and bat ectoparasites on Ilha Grande, state of Rio de Janeiro, Brazil. We constructed experimental chambers that enclosed three different rodent or bat host species, and then introduced a selected set of ectoparasitic arthropods. When given the opportunity to choose among host species, the ectoparasites showed a strong tendency to select their primary hosts, and reject novel host species. These kinds of simple experiments can be valuable tools for assessing the ability of ectoparasites to locate and discern differences between host species, and make choices about which hosts to infest, and which hosts to avoid.

Sensitivity and specificity of parallel or serial serological testing for detection of canine Leishmania infection

In Brazil, human and canine visceral leishmaniasis (CVL) caused byLeishmania infantum has undergone urbanisation since 1980, constituting a public health problem, and serological tests are tools of choice for identifying infected dogs. Until recently, the Brazilian zoonoses control program recommended enzyme-linked immunosorbent assays (ELISA) and indirect immunofluorescence assays (IFA) as the screening and confirmatory methods, respectively, for the detection of canine infection. The purpose of this study was to estimate the accuracy of ELISA and IFA in parallel or serial combinations. The reference standard comprised the results of direct visualisation of parasites in histological sections, immunohistochemical test, or isolation of the parasite in culture. Samples from 98 cases and 1,327 noncases were included. Individually, both tests presented sensitivity of 91.8% and 90.8%, and specificity of 83.4 and 53.4%, for the ELISA and IFA, respectively. When tests were used in parallel combination, sensitivity attained 99.2%, while specificity dropped to 44.8%. When used in serial combination (ELISA followed by IFA), decreased sensitivity (83.3%) and increased specificity (92.5%) were observed. Serial testing approach improved specificity with moderate loss in sensitivity. This strategy could partially fulfill the needs of public health and dog owners for a more accurate diagnosis of CVL.

New perspectives in the use of ink evidence in forensic science: Part II. Development and testing of mathematical algorithms for the automatic comparison of ink samples analysed by HPTLC

In the first part of this research, three stages were stated for a program to increase the information extracted from ink evidence and maximise its usefulness to the criminal and civil justice system. These stages are (a) develop a standard methodology for analysing ink samples by high-performance thin layer chromatography (HPTLC) in reproducible way, when ink samples are analysed at different time, locations and by different examiners; (b) compare automatically and objectively ink samples; and (c) define and evaluate theoretical framework for the use of ink evidence in forensic context. This report focuses on the second of the three stages. Using the calibration and acquisition process described in the previous report, mathematical algorithms are proposed to automatically and objectively compare ink samples. The performances of these algorithms are systematically studied for various chemical and forensic conditions using standard performance tests commonly used in biometrics studies. The results show that different algorithms are best suited for different tasks. Finally, this report demonstrates how modern analytical and computer technology can be used in the field of ink examination and how tools developed and successfully applied in other fields of forensic science can help maximising its impact within the field of questioned documents.

Tools in pharmacovigilance in psychiatry: therapeutic drug monitoring, pharmacogenetic tests and drug-drug interactions databases

SUMMARYIn order to increase drug safety we must better understand how medication interacts with the body of our patients and this knowledge should be made easily available for the clinicians prescribing the medication. This thesis contributes to how the knowledge of some drug properties can increase and how to make information readily accessible for the medical professionals. Furthermore it investigates the use of Therapeutic drug monitoring, drug interaction databases and pharmacogenetic tests in pharmacovigilance.Two pharmacogenetic studies in the naturalistic setting of psychiatric in-patients clinics have been performed; one with the antidepressant mirtazapine, the other with the antipsychotic clozapine. Forty-five depressed patients have been treated with mirtazapine and were followed for 8 weeks. The therapeutic effect was as seen in other previous studies. Enantioselective analyses could confirm an influence of age, gender and smoking in the pharmacokinetics of mirtazapine; it showed a significant influence of the CYP2D6 genotype on the antidepressant effective S-enantiomer, and for the first time an influence of the CYP2B6 genotype on the plasma concentrations of the 8-OH metabolite was found. The CYP2B6*/*6 genotype was associated to better treatment response. A detailed hypothesis of the metabolic pathways of mirtazapine is proposed. In the second pharmacogenetic study, analyses of 75 schizophrenic patients treated with clozapine showed the influence of CYP450 and ABCB1 genotypes on its pharmacokinetics. For the first time we could demonstrate an in vivo effect of the CYP2C19 genotype and an influence of P-glycoprotein on the plasma concentrations of clozapine. Further we confirmed in vivo the prominent role of CYP1A2 in the metabolism of clozapine.Identifying risk factors for the occurrence of serious adverse drug reactions (SADR) would allow a more individualized and safer drug therapy. SADR are rare events and therefore difficult to study. We tested the feasibility of a nested matched case-control study to examine the influence of high drug plasma levels and CYP2D6 genotypes on the risk to experience an SADR. In our sample we compared 62 SADR cases with 82 controls; both groups were psychiatric patients from the in-patient clinic Königsfelden. Drug plasma levels of >120% of the upper recommended references could be identified as a risk factor with a statistically significant odds ratio of 3.5, a similar trend could be seen for CYP2D6 poor metaboliser. Although a matched case-control design seems a valid method, 100% matching is not easy to perform in a relative small cohort of one in-patient clinic. However, a nested case-control study is feasible.On the base of the experience gained in the AMSP+ study and the fact that we have today only sparse data indicating that routine drug plasma concentration monitoring and/or pharmacogenetic testing in psychiatry are justified to minimize the risk for ADR, we developed a test algorithm named "TDM plus" (TDM plus interaction checks plus pharmacogenetic testing).Pharmacovigilance programs such as the AMSP project (AMSP = Arzneimittelsicherheit in der Psychiatrie) survey psychiatric in-patients in order to collect SADR and to detect new safety signals. Case reports of such SADR are, although anecdotal, valuable to illustrate rare clinical events and sometimes confirm theoretical assumptions of e.g. drug interactions. Seven pharmacovigilance case reports are summarized in this thesis.To provide clinicians with meaningful information on the risk of drug combinations, during the course of this thesis the internet based drug interaction program mediQ.ch (in German) has been developed. Risk estimation is based on published clinical and pharmacological information of single drugs and alimentary products, including adverse drug reaction profiles. Information on risk factors such as renal and hepatic insufficiency and specific genotypes are given. More than 20'000 drug pairs have been described in detail. Over 2000 substances with their metabolic and transport pathways are included and all information is referenced with links to the published scientific literature or other information sources. Medical professionals of more than 100 hospitals and 300 individual practitioners do consult mediQ.ch regularly. Validations with comparisons to other drug interaction programs show good results.Finally, therapeutic drug monitoring, drug interaction programs and pharmacogenetic tests are helpful tools in pharmacovigilance and should, in absence of sufficient routine tests supporting data, be used as proposed in our TDM plus algorithm.RESUMEPour améliorer la sécurité d'emploi des médicaments il est important de mieux comprendre leurs interactions dans le corps des patients. Ensuite le clinicien qui prescrit une pharmacothérapie doit avoir un accès simple à ces informations. Entre autres, cette thèse contribue à mieux connaître les caractéristiques pharmacocinétiques de deux médicaments. Elle examine aussi l'utilisation de trois outils en pharmacovigilance : le monitorage thérapeutique des taux plasmatiques des médicaments (« therapeutic drug monitoring »), un programme informatisé d'estimation du risque de combinaisons médicamenteuses, et enfin des tests pharmacogénétiques.Deux études cliniques pharmacogénétiques ont été conduites dans le cadre habituel de clinique psychiatrique : l'une avec la mirtazapine (antidépresseur), l'autre avec la clozapine (antipsychotique). On a traité 45 patients dépressifs avec de la mirtazapine pendant 8 semaines. L'effet thérapeutique était semblable à celui des études précédentes. Nous avons confirmé l'influence de l'âge et du sexe sur la pharmacocinétique de la mirtazapine et la différence dans les concentrations plasmatiques entre fumeurs et non-fumeurs. Au moyen d'analyses énantiomères sélectives, nous avons pu montrer une influence significative du génotype CYP2D6 sur l'énantiomère S+, principalement responsable de l'effet antidépresseur. Pour la première fois, nous avons trouvé une influence du génotype CYP2B6 sur les taux plasmatiques de la 8-OH-mirtazapine. Par ailleurs, le génotype CYP2B6*6/*6 était associé à une meilleure réponse thérapeutique. Une hypothèse sur les voies métaboliques détaillées de la mirtazapine est proposée. Dans la deuxième étude, 75 patients schizophrènes traités avec de la clozapine ont été examinés pour étudier l'influence des génotypes des iso-enzymes CYP450 et de la protéine de transport ABCB1 sur la pharmacocinétique de cet antipsychotique. Pour la première fois, on a montré in vivo un effet des génotypes CYP2C19 et ABCB1 sur les taux plasmatiques de la clozapine. L'importance du CYP1A2 dans le métabolisme de la clozapine a été confirmée.L'identification de facteurs de risques dans la survenue d'effets secondaire graves permettrait une thérapie plus individualisée et plus sûre. Les effets secondaires graves sont rares. Dans une étude de faisabilité (« nested matched case-control design » = étude avec appariement) nous avons comparé des patients avec effets secondaires graves à des patients-contrôles prenant le même type de médicaments mais sans effets secondaires graves. Des taux plasmatiques supérieurs à 120% de la valeur de référence haute sont associés à un risque avec « odds ratio » significatif de 3.5. Une tendance similaire est apparue pour le génotype du CYP2D6. Le « nested matched case-control design » semble une méthode valide qui présente cependant une difficulté : trouver des patients-contrôles dans le cadre d'une seule clinique psychiatrique. Par contre la conduite d'une « nested case-control study » sans appariement est recommandable.Sur la base de notre expérience de l'étude AMSP+ et le fait que nous disposons que de peux de données justifiant des monitorings de taux plasmatiques et/ou de tests pharmacogénétiques de routine, nous avons développé un test algorithme nommé « TDMplus » (TDM + vérification d'interactions médicamenteuses + tests pharmacogénétique).Des programmes de pharmacovigilances comme celui de l'AMSP (Arzneimittelsicherheit in der Psychiatrie = pharmacovigilance en psychiatrie) collectent les effets secondaires graves chez les patients psychiatriques hospitalisés pour identifier des signaux d'alertes. La publication de certains de ces cas même anecdotiques est précieuse. Elle décrit des événements rares et quelques fois une hypothèse sur le potentiel d'une interaction médicamenteuse peut ainsi être confirmée. Sept publications de cas sont résumées ici.Dans le cadre de cette thèse, on a développé un programme informatisé sur internet (en allemand) - mediQ.ch - pour estimer le potentiel de risques d'une interaction médicamenteuse afin d'offrir en ligne ces informations utiles aux cliniciens. Les estimations de risques sont fondées sur des informations cliniques (y compris les profils d'effets secondaires) et pharmacologiques pour chaque médicament ou substance combinés. Le programme donne aussi des informations sur les facteurs de risques comme l'insuffisance rénale et hépatique et certains génotypes. Actuellement il décrit en détail les interactions potentielles de plus de 20'000 paires de médicaments, et celles de 2000 substances actives avec leurs voies de métabolisation et de transport. Chaque information mentionne sa source d'origine; un lien hypertexte permet d'y accéder. Le programme mediQ.ch est régulièrement consulté par les cliniciens de 100 hôpitaux et par 300 praticiens indépendants. Les premières validations et comparaisons avec d'autres programmes sur les interactions médicamenteuses montrent de bons résultats.En conclusion : le monitorage thérapeutique des médicaments, les programmes informatisés contenant l'information sur le potentiel d'interaction médicamenteuse et les tests pharmacogénétiques sont de précieux outils en pharmacovigilance. Nous proposons de les utiliser en respectant l'algorithme « TDM plus » que nous avons développé.