Impact of pressure profile and duration of recruitment maneuvers on morphofunctional and biochemical variables in experimental lung injury

Objective: To investigate the effects of the rate of airway pressure increase and duration of recruitment maneuvers on lung function and activation of inflammation, fibrogenesis, and apoptosis in experimental acute lung injury. Design: Prospective, randomized, controlled experimental study. Setting: University research laboratory. Subjects: Thirty-five Wistar rats submitted to acute lung injury induced by cecal ligation and puncture. Interventions: After 48 hrs, animals were randomly distributed into five groups (seven animals each): 1) nonrecruited (NR); 2) recruitment maneuvers (RMs) with continuous positive airway pressure (CPAP) for 15 secs (CPAP15); 3) RMs with CPAP for 30 secs (CPAP30); 4) RMs with stepwise increase in airway pressure (STEP) to targeted maximum within 15 secs (STEP15); and 5) RMs with STEP within 30 secs (STEP30). To perform STEP RMs, the ventilator was switched to a CPAP mode and positive end-expiratory pressure level was increased stepwise. At each step, airway pressure was held constant. RMs were targeted to 30 cm H(2)O. Animals were then ventilated for 1 hr with tidal volume of 6 mL/kg and positive end-expiratory pressure of 5 cm H(2)O. Measurements and Main Results: Blood gases, lung mechanics, histology (light and electronic microscopy), interleukin-6, caspase 3, and type 3 procollagen mRNA expressions in lung tissue. All RMs improved oxygenation and lung static elastance and reduced alveolar collapse compared to NR. STEP30 resulted in optimal performance, with: 1) improved lung static elastance vs. NR, CPAP15, and STEP15; 2) reduced alveolar-capillary membrane detachment and type 2 epithelial and endothelial cell injury scores vs. CPAP15 (p < .05); and 3) reduced gene expression of interleukin-6, type 3 procollagen, and caspase 3 in lung tissue vs. other RMs. Conclusions: Longer-duration RMs with slower airway pressure increase efficiently improved lung function, while minimizing the biological impact on lungs. (Crit Care Med 2011; 39:1074-1081)

Technological adoption in health care

This paper addresses the impact of payment systems on the rate of technology adoption. We present a model where technological shift is driven by demand uncertainty, increased patients’ benefit, financial variables, and the reimbursement system to providers. Two payment systems are studied: cost reimbursement and (two variants of) DRG. According to the system considered, adoption occurs either when patients’ benefits are large enough or when the differential reimbursement across technologies offsets the cost of adoption. Cost reimbursement leads to higher adoption of the new technology if the rate of reimbursement is high relative to the margin of new vs. old technology reimbursement under DRG. Having larger patient benefits favors more adoption under the cost reimbursement payment system, provided that adoption occurs initially under both payment systems.

Factores tecnológicos que inciden sobre la residualidad de plaguicidas en granos de soja. Technological factors affecting pesticide residues in soybean grains.

La producción de los cultivos está afectada por factores bióticos entre los que se destacan las enfermedades, malezas y plagas, por esto es de importancia el uso de plaguicidas que permitan mantener la producción. Sin embargo, estos productos constituyen un serio riesgo para la salud si no se aplican adecuadamente a fin de no dejar residuos en los granos. La introducción de marcos regulatorios cada vez más estrictos constituyen una barrera para las exportaciones actuales y futuras. El sistema agrícola-industrial argentino no cuenta aún con suficiente información para implementar las medidas adecuadas para prevenir la contaminación de granos con plaguicidas en pre y postcosecha. Se hipotetiza que la residualidad de plaguicidas en granos de soja en la Región Centro de Córdoba está influenciada por factores tanto tecnológicos como ambientales. La evaluación de la importancia relativa de estos factores permite sugerir estrategias de manejo adecuadas para asegurar niveles de residuos por debajo de los límites máximos permitidos. Se plantea como objetivo general identificar los factores tecnológicos (tecnología del cultivo, propiedades fisico-químicas de los plaguicidas, tecnología de aplicación) y sus interacciones, que inciden a campo y en postcosecha sobre el nivel de residuos de insecticidas en granos de soja, en la Región Centro de Córdoba. Como objetivos específicos se pretende cuantificar los residuos que generan las aplicaciones habituales de insecticidas, evaluar la influencia de los diferentes factores tecnológicos y sus interacciones sobre los niveles de residuos y adecuar curvas de disipación de plaguicidas a las condiciones de la región. También aportar conocimientos e información sobre el tema y sugerir prácticas de manejo que reduzcan los niveles de residuos, asegurando la calidad e inocuidad de los alimentos. Para el logro de estos objetivos se realizarán ensayos de evaluación de insecticidas a campo y en postcosecha en la localidad de Manfredi, Provincia de Córdoba, durante dos temporadas agrícolas. Se evaluarán distintas dosis y momentos de aplicación de los insecticidas endosulfán, clorpirifós+cipermetrina y fenitrotión en los ensayos a campo y fenitrotión, esfenvalerato, clorpirifós, deltametrina, DDVP y pirimifós metil en postcosecha. Con endosulfan se realizarán ensayos adecuados para el desarrollo de curvas de disipación. La determinación de residuos de plaguicidas se realizará utilizando determinación de multiresiduos a través cromatografía. Las curvas de disipación para endosulfan se ajustarán a través de modelos no lineales. Los conocimientos e información respecto a la influencia de los factores tecnológicos y sus interacciones sobre el nivel de residuos de plaguicidas en granos de soja, generados como resultados del presente proyecto, serán de utilidad para enriquecer las bases científico-técnicas en el tema y enfrentar el problema de la contaminación de granos con plaguicidas. Identificar la influencia de los factores tecnológicos y sus interacciones permitirá desarrollar prácticas de manejo tendientes a obtener productos con un nivel de residuos por debajo de los límites permitidos. La adecuación de curvas de disipación de plaguicidas a la Región Centro de Córdoba, permitirá efectuar predicciones sobre el contenido de residuos a causa de un tratamiento en un momento dado, conocer la importancia de las distintas variables y la posibilidad de variarlas para disminuir el nivel de residuos en los granos. Es importante profundizar sobre este tema ya que no existe la cantidad de información suficiente para enfrentar el problema de la contaminación por plaguicidas en nuestros sistemas productivos. Esta información es necesaria para poder garantizar la calidad e inocuidad de los alimentos tanto para el comercio interno como externo, asegurando la permanencia de los productos argentinos en los mercados internacionales.

Technological adoption in health care

This paper addresses the impact of payment systems on the rate of technology adoption. We present a model where technological shift is driven by demand uncertainty, increased patients' benefit, financial variables, and the reimbursement system to providers. Two payment systems are studied: cost reimbursement and (two variants of) DRG. According to the system considered, adoption occurs either when patients' benefits are large enough or when the differential reimbursement across technologies offsets the cost of adoption. Cost reimbursement leads to higher adoption of the new technology if the rate of reimbursement is high relative to the margin of new vs. old technology reimbursement under DRG. Having larger patient benefits favors more adoption under the cost reimbursement payment system, provided that adoption occurs initially under both payment systems.

Innovation and absorptive capacity: What is the role of technological frontier?

This paper explores how absorptive capacity affects the innovative performance and productivity dynamics of Spanish firms. A firm’s efficiency levels are measured using two variables: the labour productivity and the Total Factor Productivity (TFP). The theoretical framework is based on the seminal contributions of Cohen and Levinthal (1989, 1990) regarding absorptive capacity; and the applied framework is based on the four-stage structural model proposed by Crépon, Duguet and Mairesse (1998) for setting the determinants of R&D, the effects of R&D activities on innovation outputs, and the impacts of innovation on firm productivity. The present study uses a twostage structural model. In the first stage, a probit estimation is used to investigate how the sources of R&D, the absorptive capacity and a vector of the firm’s individual features influence the firm’s likelihood of developing innovations in products or processes. In the second phase, a quantile regression is used to analyze the effect of R&D sources, absorptive capacity and firm characteristics on productivity. This method shows the elasticity of each exogenous variable on productivity according to the firms’ levels of efficiency, and thus allows us to distinguish between firms that are close to the technological frontier and those that are further away from it. We used extensive firm-level panel data from 5,575 firms for the 2004-2009 period. The results show that the internal absorptive capacity has a strong impact on the productivity of firms, whereas the role of external absorptive capacity differs according to nature of the each industry and according the distance of firms from the technological frontier. Key words: R&D sources, innovation strategies, absorptive capacity, technological distance, quantile regression.

Complementarity between human capital and trade in regional technological progress

The effect of openness and trade orientation on economic growth remains a highly contentious issue in the literature. Trade facilitates the spread of knowledge and the adoption of more advanced and efficient technologies, which hastens total factor productivity (TFP) growth and, hence, per capita income. New technologies that spread through trade require a sufficiently skilled labour force to adapt them to the domestic productive environment. Thus, openness and human capital accumulation will lead to TFP growth and the greater the complementarity between both variables, the higher the TFP growth. This paper discusses the implications of these assumptions and tests their empirical validity, using a pool of data for manufacturing industry in Spanish regions in a period in which both the stock of human capital and openness experienced a notable increase.

Technological Change and Immigration

We develop a simple model where two technologies are available to produce the same good, and we study under what conditions both will be used. We use the model to analyze the consequences of the simultaneous use of two different technologies for the economic variables and economic growth. Finally, we explore how migrations of factors affect the technological change and the performance of the economy.

Complementarity between human capital and trade in regional technological progress

The effect of openness and trade orientation on economic growth remains a highly contentious issue in the literature. Trade facilitates the spread of knowledge and the adoption of more advanced and efficient technologies, which hastens total factor productivity (TFP) growth and, hence, per capita income. New technologies that spread through trade require a sufficiently skilled labour force to adapt them to the domestic productive environment. Thus, openness and human capital accumulation will lead to TFP growth and the greater the complementarity between both variables, the higher the TFP growth. This paper discusses the implications of these assumptions and tests their empirical validity, using a pool of data for manufacturing industry in Spanish regions in a period in which both the stock of human capital and openness experienced a notable increase.

Technological Change and Immigration

We develop a simple model where two technologies are available to produce the same good, and we study under what conditions both will be used. We use the model to analyze the consequences of the simultaneous use of two different technologies for the economic variables and economic growth. Finally, we explore how migrations of factors affect the technological change and the performance of the economy.

Technological level and epidemiological aspects of sheep husbandry in Minas Gerais, southeastern Brazil

Epidemiological and health aspects of sheep husbandry were assessed on 213 sheep flocks in 142 municipalities from the state of Minas Gerais, southeastern Brazil. An updated questionnaire was filled out for each flock, requesting data on the farm, the flock and the farmer by the veterinarians of the State Government Agency for Animal Health (Instituto Mineiro de Agropecuária). Thirteen important variables were selected and scored to determine the technological level of the 117 farms; 0.9% of them was classified as high technological level, 45.3% as medium technological level and 53.0% as low technological level. Lamb production was the main objective of the farms and the main features were low-frequencies of individual identification of animals (16.9%), technical assistance (31.9%), use of quarantine for newly acquired animals (0.9%) the separation of animals by age group (3.7%) and requeste the sanitary certificate at purchasing of animals (11.7%). The main health problems reported were abortion (23.9%), keratoconjunctivitis (17.9%), contagious ecthyma (13.6%), pneumonia (10.3%), diarrhea (9.3%) and caseous lymphadenitis (6.1%). Information of the epidemiological situation and the mainly health measures used in the sheep farms are important to improve the productivity and quality of the lamb.

Drying of sicilian lemon residue: influence of process variables on the evaluation of the dietary fiber produced

In this study, the effect of the process variables of the air-drying of Sicilian lemon residues on some technological properties of the fibers produced was studied. The determination and modeling of desorption isotherms were used to establish the equilibrium moisture content at 60, 75, and 90 °C using the static method with 8 saturated salt solutions. The best fit was obtained with BET and GAB models. The drying process was conducted in a vertical tray dryer and delineated according to a central composite experimental design (2²) using the following as factors: air velocity (0.5, 0.75 and 1 m/s) and temperature (60, 75, and 90 °C), and it presented a good fit to the exponential model (R² > 99.9%). The experimental design responses evaluated were the technological properties of the fibers: water-holding, oil-holding, and swelling capacity. Since these properties were present in high levels, the lemon residues could be used to increase content of fibers in foods resulting in the addition of nutritional benefits for the consumers.

Technological properties of precooked flour containing coffee powder and rice by thermoplastic extrusion

Although Brazil is a country of tradition in both the production and consumption of coffee, the most of the coffee is consumed as a beverage, which reduces greatly the competitiveness on international market, for reducing the chances of supplying the product under other forms of consumption. Owing to that, the aim of this study was developing a precooked mixed flour containing coffee powder and rice for use in coffee flavored products. Mixtures of rice and coffee in the proportions of 900:100, 850:150 and 800:200 g, respectively, were processed in a single screw extruder (Brabender DS-20, Duisburg, German) and the effect of the extrusion process on the variables moisture content (16%, 18% and 20%) and temperature in the third extruding zone (140 °C, 160 °C and 180 °C) was studied. The results for expansion index ranged from 2.91 to 11.11 mm in diameter; the water absorption index from 4.59 to 6.33 g gel/g sample and the water solubility index varied from 4.05% to 8.57%. These results showed that, despite coffee powder influenced the variables studied, the expanded product after milling resulted in a extruded mixture with good absorption and water solubility indices, which favors the use of the precooked mixed flour for human consumption.

Effect of adding unconventional raw materials on the technological properties of rice fresh pasta

The aim of this study was to develop fettuccini type rice fresh pasta by cold extrusion. To produce the pasta, a 2² Central Composite Rotational Design was used, in which the effects of the addition of pre-gelatinized rice flour - PGRF (0-60%) and modified egg albumin - MEA (0-10%) were studied. The dependent variables were the results of the cooking test and of the instrumental texture. The optimum cooking time for all of the formulations of rice fresh pasta was 3 minutes. MEA had a greater effect on increasing the weight of the pasta when compared to that of PGRF. It was found that with the addition of PGRF increase in loss of solids in cooking water, whereas MEA exerted the opposite effect on this parameter. Moreover, the maximum value of MEA (10%) had an optimum effect on pasta firmness, while PGRF had a negative effect on this parameter. The maximum values of PGRF and MEA reduced the stickiness of the pasta. Based on these results and on the parameters considered as most important, the rice pasta with the best technological characteristics was that with the maximum levels of MEA (10%) and no addition of PGRF (0%). This product was submitted to sensory and microbiological analyses, with good results.

Variables associated with nest survival of Golden-winged Warblers (Vermivora chrysoptera) among vegetation communities commonly used for nesting

Among shrubland- and young forest-nesting bird species in North America, Golden-winged Warblers (Vermivora chrysoptera) are one of the most rapidly declining partly because of limited nesting habitat. Creation and management of high quality vegetation communities used for nesting are needed to reduce declines. Thus, we examined whether common characteristics could be managed across much of the Golden-winged Warbler’s breeding range to increase daily survival rate (DSR) of nests. We monitored 388 nests on 62 sites throughout Minnesota, Wisconsin, New York, North Carolina, Pennsylvania, Tennessee, and West Virginia. We evaluated competing DSR models in spatial-temporal (dominant vegetation type, population segment, state, and year), intraseasonal (nest stage and time-within-season), and vegetation model suites. The best-supported DSR models among the three model suites suggested potential associations between daily survival rate of nests and state, time-within-season, percent grass and Rubus cover within 1 m of the nest, and distance to later successional forest edge. Overall, grass cover (negative association with DSR above 50%) and Rubus cover (DSR lowest at about 30%) within 1 m of the nest and distance to later successional forest edge (negative association with DSR) may represent common management targets across our states for increasing Golden-winged Warbler DSR, particularly in the Appalachian Mountains population segment. Context-specific adjustments to management strategies, such as in wetlands or areas of overlap with Blue-winged Warblers (Vermivora cyanoptera), may be necessary to increase DSR for Golden-winged Warblers.

A tractable means of correcting sector level TFP calculations in the face of biased technological change.

The measurement of the impact of technical change has received significant attention within the economics literature. One popular method of quantifying the impact of technical change is the use of growth accounting index numbers. However, in a recent article Nelson and Pack (1999) criticise the use of such index numbers in situations where technical change is likely to be biased in favour of one or other inputs. In particular they criticise the common approach of applying observed cost shares, as proxies for partial output elasticities, to weight the change in quantities which they claim is only valid under Hicks neutrality. Recent advances in the measurement of product and factor biases of technical change developed by Balcombe et al (2000) provide a relatively straight-forward means of correcting product and factor shares in the face of biased technical progress. This paper demonstrates the correction of both revenue and cost shares used in the construction of a TFP index for UK agriculture over the period 1953 to 2000 using both revenue and cost function share equations appended with stochastic latent variables to capture the bias effect. Technical progress is shown to be biased between both individual input and output groups. Output and input quantity aggregates are then constructed using both observed and corrected share weights and the resulting TFPs are compared. There does appear to be some significant bias in TFP if the effect of biased technical progress is not taken into account when constructing the weights