The Figures

This short film, created by David Megarrity and Luke Monsour, experimented within a short timeframe with the challenge of superimposition of hand-drawn backgrounds, non-verbal action, and a short, sharp shoot. The aim was also to find a single piece of standalone music that would act as an unedited soundtrack It won Best Queensland Film at the Woodford Film Festival in 2005, and was screened at Base-Court, Lausanne Switzerland in 2006, and the Westgarth Film Festival 2005. It was acquired by comedy website minimovie in 2007.

A simulation study of unified GPS and roadside ranging technologies for vehicle positioning

The future vehicle navigation for safety applications requires seamless positioning at the accuracy of sub-meter or better. However, standalone Global Positioning System (GPS) or Differential GPS (DGPS) suffer from solution outages while being used in restricted areas such as high-rise urban areas and tunnels due to the blockages of satellite signals. Smoothed DGPS can provide sub-meter positioning accuracy, but not the seamless requirement. A disadvantage of the traditional navigation aids such as Dead Reckoning and Inertial Measurement Unit onboard vehicles are either not accurate enough due to error accumulation or too expensive to be acceptable by the mass market vehicle users. One of the alternative technologies is to use the wireless infrastructure installed in roadside to locate vehicles in regions where the Global Navigation Satellite Systems (GNSS) signals are not available (for example: inside tunnels, urban canyons and large indoor car parks). The examples of roadside infrastructure which can be potentially used for positioning purposes could include Wireless Local Area Network (WLAN)/Wireless Personal Area Network (WPAN) based positioning systems, Ultra-wide band (UWB) based positioning systems, Dedicated Short Range Communication (DSRC) devices, Locata’s positioning technology, and accurate road surface height information over selected road segments such as tunnels. This research reviews and compares the possible wireless technologies that could possibly be installed along roadside for positioning purposes. Models and algorithms of integrating different positioning technologies are also presented. Various simulation schemes are designed to examine the performance benefits of united GNSS and roadside infrastructure for vehicle positioning. The results from these experimental studies have shown a number of useful findings. It is clear that in the open road environment where sufficient satellite signals can be obtained, the roadside wireless measurements contribute very little to the improvement of positioning accuracy at the sub-meter level, especially in the dual constellation cases. In the restricted outdoor environments where only a few GPS satellites, such as those with 45 elevations, can be received, the roadside distance measurements can help improve both positioning accuracy and availability to the sub-meter level. When the vehicle is travelling in tunnels with known heights of tunnel surfaces and roadside distance measurements, the sub-meter horizontal positioning accuracy is also achievable. Overall, simulation results have demonstrated that roadside infrastructure indeed has the potential to provide sub-meter vehicle position solutions for certain road safety applications if the properly deployed roadside measurements are obtainable.

miRDeep*: an integrated application tool for miRNA identification from RNA sequencing data

miRDeep and its varieties are widely used to quantify known and novel micro RNA (miRNA) from small RNA sequencing (RNAseq). This article describes miRDeep*, our integrated miRNA identification tool, which is modeled off miRDeep, but the precision of detecting novel miRNAs is improved by introducing new strategies to identify precursor miRNAs. miRDeep* has a user-friendly graphic interface and accepts raw data in FastQ and Sequence Alignment Map (SAM) or the binary equivalent (BAM) format. Known and novel miRNA expression levels, as measured by the number of reads, are displayed in an interface, which shows each RNAseq read relative to the pre-miRNA hairpin. The secondary pre-miRNA structure and read locations for each predicted miRNA are shown and kept in a separate figure file. Moreover, the target genes of known and novel miRNAs are predicted using the TargetScan algorithm, and the targets are ranked according to the confidence score. miRDeep* is an integrated standalone application where sequence alignment, pre-miRNA secondary structure calculation and graphical display are purely Java coded. This application tool can be executed using a normal personal computer with 1.5 GB of memory. Further, we show that miRDeep* outperformed existing miRNA prediction tools using our LNCaP and other small RNAseq datasets. miRDeep* is freely available online at http://www.australianprostatecentre.org/research/software/mirdeep-star

Enacted Cartography : Formations - 2012 Venice Architecture Biennale

RESEARCH BACKGROUND Enacted Cartography documents 10 years of creative research practice by Ian Weir Research Architect and was developed as standalone exhibition to support Dr Weir’s selection by the Australian Institute of Architects to represent innovative architectural practice via the Institute’s review entitled Formations: New Practices in Australian Architecture – which took the form of an exhibition and book presented in Venice, Italy for 13th International Architecture Exhibition (Venice Architecture Biennale). All works exhibited in Enacted Cartography are original works by Dr Weir and are generated either from or for the remote biodiverse landscapes of the Fitzgerald Bioregion on the south coast of Western Australia. RESEARCH CONTRIBUTION As a creative work in its own right, the Enacted Cartography exhibition makes the following contributions to knowledge: 1. Expands understandings of architectural practice by presenting a geographically-specific but multimodal form of architectural practice - wherein practitioners cross over discipline boundaries into art practice, landscape representation, website design, undergraduate university teaching and community advocacy. 2. Contributes to understandings of how such a diverse multimodal form of practice might be represented through both digital media and traditional print media in an exhibition format. 3. Expands understandings of how architectural practitioners might work within a particular place to develop a geographically-specific sense of identity, a ‘landscape of resistance’. RESEARCH SIGNIFICANCE Enacted Cartography was presented to an international audience during the 13th International Architecture Exhibition (Venice Architecture Biennale). The significance of Dr Weir’s research is evidence by his selected by the Australian Institute of Architects to represent innovation in architectural practice for the Biennale. Enacted Cartography addresses problems of national and international importance including: 1. The sustainable development of biodiverse remote landscapes; 2. The reconciliation of bushfire safety and biodiversity conservation; 3. The necessity for rethinking of architectural design methodologies to meet the complexity of landscape management and design; 4. It challenges orthodox forms of landscape representation (aerial photography, for example) which are demonstrably inadequate registrations of biophysical and cultural landscapes.

The relationship between kurtosis- and envelope-based indexes for the diagnostic of rolling element bearings

The coupling of kurtosis based-indexes and envelope analysis represents one of the most successful and widespread procedures for the diagnostics of incipient faults on rolling element bearings. Kurtosis-based indexes are often used to select the proper demodulation band for the application of envelope-based techniques. Kurtosis itself, in slightly different formulations, is applied for the prognostic and condition monitoring of rolling element bearings, as a standalone tool for a fast indication of the development of faults. This paper shows for the first time the strong analytical connection which holds for these two families of indexes. In particular, analytical identities are shown for the squared envelope spectrum (SES) and the kurtosis of the corresponding band-pass filtered analytic signal. In particular, it is demonstrated how the sum of the peaks in the SES corresponds to the raw 4th order moment. The analytical results show as well a link with an another signal processing technique: the cepstrum pre-whitening, recently used in bearing diagnostics. The analytical results are the basis for the discussion on an optimal indicator for the choice of the demodulation band, the ratio of cyclic content (RCC), which endows the kurtosis with selectivity in the cyclic frequency domain and whose performance is compared with more traditional kurtosis-based indicators such as the protrugram. A benchmark, performed on numerical simulations and experimental data coming from two different test-rigs, proves the superior effectiveness of such an indicator. Finally a short introduction to the potential offered by the newly proposed index in the field of prognostics is given in an additional experimental example. In particular the RCC is tested on experimental data collected on an endurance bearing test-rig, showing its ability to follow the development of the damage with a single numerical index.

Development of optical ray tracing model of a standard parabolic trough collector

Parabolic trough concentrator collector is the most matured, proven and widespread technology for the exploitation of the solar energy on a large scale for middle temperature applications. The assessment of the opportunities and the possibilities of the collector system are relied on its optical performance. A reliable Monte Carlo ray tracing model of a parabolic trough collector is developed by using Zemax software. The optical performance of an ideal collector depends on the solar spectral distribution and the sunshape, and the spectral selectivity of the associated components. Therefore, each step of the model, including the spectral distribution of the solar energy, trough reflectance, glazing anti-reflection coating and the absorber selective coating is explained and verified. Radiation flux distribution around the receiver, and the optical efficiency are two basic aspects of optical simulation are calculated using the model, and verified with widely accepted analytical profile and measured values respectively. Reasonably very good agreement is obtained. Further investigations are carried out to analyse the characteristics of radiation distribution around the receiver tube at different insolation, envelop conditions, and selective coating on the receiver; and the impact of scattered light from the receiver surface on the efficiency. However, the model has the capability to analyse the optical performance at variable sunshape, tracking error, collector imperfections including absorber misalignment with focal line and de-focal effect of the absorber, different rim angles, and geometric concentrations. The current optical model can play a significant role in understanding the optical aspects of a trough collector, and can be employed to extract useful information on the optical performance. In the long run, this optical model will pave the way for the construction of low cost standalone photovoltaic and thermal hybrid collector in Australia for small scale domestic hot water and electricity production.

Built heritage management systems : the framework of a digital tool for the conservation of Brisbane City Hall

Brisbane City Hall (BCH) is arguably one of Brisbane’s most notable and iconic buildings. Serving as the public’s central civic and municipal building since 1930, the importance of this heritage listed building to cultural significance and identity is unquestionable. This attribute is reflected within the local government, with a simplified image of the halls main portico entrance supplying Brisbane City Council with its insignia and trademark signifier. Regardless of these qualities, this building has been neglected in a number of ways, primarily in the physical sense with built materials, but also, and just as importantly, through inaccurate and undocumented works. Numerous restoration and renovation works have been undertaken throughout BCH’s lifetime, however the records of these amendments are far and few between. Between 2010 and 2013, BCH underwent major restoration works, the largest production project undertaken on the building since its initial construction. Just prior to this conservation process, the full extent of the buildings deterioration was identified, much of which there was little to no original documentation of. This has led to a number of issues pertaining to what investigators expected to find within the building, versus what was uncovered (the unexpected), which have resulted directly from this lack of data. This absence of record keeping is the key factor that has contributed to the decay and unknown deficiencies that had amassed within BCH. Accordingly, this raises a debate about the methods of record keeping, and the need for a more advanced process that is able to be integrated within architectural and engineering programs, whilst still maintaining the ability to act as a standalone database. The immediate objective of this research is to investigate the restoration process of BCH, with focus on the auditorium, to evaluate possible strategies to record and manage data connected to building pathology so that a framework can be developed for a digital heritage management system. The framework produced for this digital tool will enable dynamic uses of a centralised database and aims to reduce the significant data loss. Following an in-depth analysis of this framework, it can be concluded that the implementation of the suggested digital tool would directly benefit BCH, and could ultimately be incorporated into a number of heritage related built form.

Modeling and analysis of a novel variable-speed cage induction generator

This paper introduces a novel cage induction generator and presents a mathematical model, through which its behavior can be accurately predicted. The proposed generator system employs a three-phase cage induction machine and generates single-phase and constant-frequency electricity at varying rotor speeds without an intermediate inverter stage. The technique uses any one of the three stator phases of the machine as the excitation winding and the remaining two phases, which are connected in series, as the power winding. The two-series-connected-and-one-isolated (TSCAOI) phase winding configuration magnetically decouples the two sets of windings, enabling independent control. Electricity is generated through the power winding at both sub- and super-synchronous speeds with appropriate excitation to the isolated single winding at any frequency of generation. A dynamic mathematical model, which accurately predicts the behavior of the proposed generator, is also presented and implemented in MATLAB/Simulink. Experimental results of a 2-kW prototype generator under various operating conditions are presented, together with theoretical results, to demonstrate the viability of the TSCAOI power generation. The proposed generator is simple and capable of both storage and retrieval of energy through its excitation winding and is expected to be suitable for applications, such as small wind turbines and microhydro systems.

An Australian perspective on the ALI-III global principles for cooperation in International insolvency cases

In 2012, Professor Ian Fletcher (United Kingdom) and Professor Bob Wessels (The Netherlands) presented a Report to the American Law Institute and the International Insolvency Institute entitled Transnational Insolvency: Global Principles for Cooperation in International Insolvency Cases (“Global Principles”). This followed their appointment as Joint Reporters to investigate whether the essential provisions of the American Law Institute Principles of Cooperation among the North American Free Trade Agreement Countries with their annexed Guidelines Applicable to Court-to-Court Communication in Cross-border Cases may, with certain necessary modifications, be acceptable for use by jurisdictions across the world. This article comments on the Global Principles from the perspective of a jurisdiction which has adopted the UNCITRAL Model Law on Cross-border Insolvency (“Model Law”). In 2008, Australia enacted a standalone statute, the Cross-border Insolvency Act 2008 (Cth) to which is annexed the Model Law. In that process, it made minimal changes to the Model Law text. Against the background of the 2008 Act, related procedural laws as well as Australia’s general insolvency statutes and recent cross-border insolvency jurisprudence, this article comments on the potential relevance of the Transnational Insolvency Report as a point of reference for Australian courts and insolvency administrators when addressing international insolvency cases. By comparing the Global Principles with the Model Law as closely adopted in Australia, this analysis is a resource for other Model Law jurisdictions when considering the potential relevance of the Global Principles for their own international insolvency practice.

Importance of literature profiling: An archival analysis with illustrative examples for IS researchers

The importance of a thorough and systematic literature review has long been recognised across academic domains as critical to the foundation of new knowledge and theory evolution. Driven by an exponentially growing body of knowledge in the IS discipline, there has been a recent influx of guidance on how to conduct a literature review. As literature reviews are emerging as a standalone research method in itself, increasingly these method focused guidelines are of great interest, receiving acceptance at top tier IS publication outlets. Nevertheless, the finer details which offer justification for the selected content, and the effective presentation of supporting data has not been widely discussed in these method papers to date. This paper addresses this gap by exploring the concept of ‘literature profiling’ while arguing that it is a key aspect of a comprehensive literature review. The study establishes the importance of profiling for managing aspects such as quality assurance, transparency and the mitigation of selection bias. And then discusses how profiling can provide a valid basis for data analysis based on the attributes of selected literature. In essence, this study has conducted an archival analysis of literature (predominately from the IS domain) to present its main argument; the value for literature profiling, with supporting exemplary illustrations.

Measuring industry clockspeed in the systemic industry context

Industry clockspeed has been used in earlier literature to assess the rate of change of industries but this measure remains limited in its application in longitudinal analyses as well as in systemic industry contexts. Nevertheless, there is a growing need for such a measure as business ecosystems replace standalone products and organisations are required to manage their innovation process in increasingly systemic contexts. In this paper, we firstly derive a temporal measure of technological industry clockspeed, which evaluates the time between successively higher levels of performance in the industry's product technology, over time. We secondly derive a systemic technological industry clockspeed for systemic industry contexts, which measures the time required for a particular sub-industry to utilise the level of technological performance that is provisioned by another, interdependent sub-industry. In turn, we illustrate the use of these measures in an empirical study of the systemic personal computer industry. The results of our empirical illustration show that the proposed clockspeeds together provide informative measures of the pace of change for sub-industries and systemic industry. We subsequently discuss the organisational considerations and theoretical implications of the proposed measures.

Business Ecosystems’ Evolution — An Ecosystem Clockspeed Perspective

There is a growing need for measures assessing technological changes in systemic contexts as business ecosystems replace standalone products. In these ecosystem contexts, organizations are required to manage their innovation processes in increasingly networked and complex environments. In this paper, we introduce the technology and ecosystem clockspeed measures that can be used to assess the temporal nature of technological changes in a business ecosystem. We analyze systemic changes in the personal computer (PC) ecosystem, explicitly focusing on subindustries central to the delivery of PC gaming value to the end user. Our results show that the time-based intensity of technological competition in intertwined subindustries of a business ecosystem may follow various trajectories during the evolution of the ecosystem. Hence, the technology and ecosystem clockspeed measures are able to pinpoint alternating dynamics in technological changes among the subindustries in the business ecosystem. We subsequently discuss organizational considerations and theoretical implications of the proposed measures.

A framework for evaluating the impact of obesity prevention strategies on socioeconomic inequalities in weight

We developed a theoretical framework to organize obesity prevention interventions by their likely impact on the socioeconomic gradient of weight. The degree to which an intervention involves individual agency versus structural change influences socioeconomic inequalities in weight. Agentic interventions, such as standalone social marketing, increase socioeconomic inequalities. Structural interventions, such as food procurement policies and restrictions on unhealthy foods in schools, show equal or greater benefit for lower socioeconomic groups. Many obesity prevention interventions belong to the agento–structural types of interventions, and account for the environment in which health behaviors occur, but they require a level of individual agency for behavioral change, including workplace design to encourage exercise and fiscal regulation of unhealthy foods or beverages. Obesity prevention interventions differ in their effectiveness across socioeconomic groups. Limiting further increases in socioeconomic inequalities in obesity requires implementation of structural interventions. Further empirical evaluation, especially of agento–structural type interventions, remains crucial.

Improving factory performance using an integrated sugar factory model

A whole of factory model of a raw sugar factory was developed in SysCAD software to assess and improve factory operations. The integrated sugar factory model ‘Sugar-SysCAD’ includes individual models for milling, heating and clarification, evaporation, crystallisation, steam cycle, sugar dryer and process and injection water circuits. These individual unit operation models can be either used as standalone models to optimise the unit operation or in the integrated mode to provide more accurate prediction of the effects of changes in any part of the process on the outputs of the whole factory process. Using the integrated sugar factory model, the effect of specific process operations can be understood and practical solutions can be determined to address process problems. The paper presents two factory scenarios to show the capabilities of the whole of factory model.

An analysis of risk management disclosures: Australian evidence

- Purpose Communication of risk management practices are a critical component of good corporate governance. Research to date has been of little benefit in informing regulators internationally. This paper seeks to contribute to the literature by investigating how listed Australian companies in a setting where disclosures are explicitly required by the ASX corporate governance framework, disclose risk management (RM) information in the corporate governance statements within annual reports. - Design/methodology/approach To address our study’s research questions and related hypotheses, we examine the top 300 ASX-listed companies by market capitalisation at 30 June 2010. For these firms, we identify, code and categorise RM disclosures made in the annual reports according to the disclosure categories specified in Australian Stock Exchange Corporate Governance Principles and Recommendations (ASX CGPR). The derived data is then examined using a comprehensive approach comprising thematic content analysis and regression analysis. - Findings The results indicate widespread divergence in disclosure practices and low conformance with the Principle 7 of the ASX CGPR. This result suggests that companies are not disclosing all ‘material business risks’ possibly due to ignorance at the board level, or due to the intentional withholding of sensitive information from financial statement users. The findings also show mixed results across the factors expected to influence disclosure behaviour. Notably, the presence of a risk committee (RC) (in particular, a standalone RC) and technology committee (TC) are found to be associated with improved levels of disclosure. we do not find evidence that company risk measures (as proxied by equity beta and the market-to-book ratio) are significantly associated with greater levels of RM disclosure. Also, contrary to common findings in the disclosure literature, factors such as board independence and expertise, audit committee independence, and the usage of a Big-4 auditor do not seem to impact the level of RM disclosure in the Australian context. - Research limitation/implications The study is limited by the sample and study period selection as the RM disclosures of only the largest (top 300) ASX firms are examined for the fiscal year 2010. Thus, the finding may not be generalisable to smaller firms, or earlier/later years. Also, the findings may have limited applicability in other jurisdictions with different regulatory environments. - Practical implications The study’s findings suggest that insufficient attention has been applied to RM disclosures by listed companies in Australia. These results suggest that the RM disclosures practices observed in the Australian setting may not be meeting the objectives of regulators and the needs of stakeholders. - Originality/value Despite the importance of risk management communication, it is unclear whether disclosures in annual financial reports achieve this communication. The Australian setting provides an ideal environment to examine the nature and extent of risk management communication as the Australian Securities Exchange (ASX) has recommended risk management disclosures follow Principle 7 of its principle-based governance rules since 2007.