Evaluation of immune effects of fowlpox vaccine strains and field isolates

The immune effects of fowlpox virus (FPV) field isolates and vaccine strains were evaluated in chickens infected at the age of 1 day and 6 weeks. The field isolates and the obsolete vaccine strain (FPV S) contained integrated reticuloendotheliosis virus (REV) provirus, while the current vaccine strain (FPVST) carries only REV LTR sequences. An indirect antibody ELISA was used to measure the FPV-specific antibody response. The non-specific humoral response was evaluated by injection of two T-cell-dependent antigens, sheep red blood cells (SRBC) and bovine serum albumin (BSA). There was no significant difference in the antibody response to FPV between chickens infected with FPV various isolates and strains at either age. In contrast, antibody responses to both SRBC and BSA were significantly lower in 1-day-old chickens inoculated with field isolates and FPV S at 2-3 weeks post-inoculation. Furthermore, cell-mediated immune (CMI) responses measured by in vitro lymphocyte proliferation assay and in vivo using a PHA-P skin test were significantly depressed in chickens inoculated with field isolates and FPV S at the same periods. In addition, thymus and bursal weights were lower in infected chickens. These immunosuppressive effects were not observed in chickens inoculated with the current vaccine strain, FPVST, at any time. The results of this study suggest that virulent field isolates and FPV S have immunosuppressive effects when inoculated into young chickens, which appeared in the first 3 weeks post infection. REV integrated in the FPV field isolates and FPV S may have played a central role in the development of immunosuppression. (c) 2006 Elsevier B.V. All rights reserved.

Antimicrobial Activities of Ethanol Extract and Coumestans from Eclipta alba (L.) Hassk (Asteraceae)

Ethanol extract and fractions from aerial parts of Eclipta alba (L.) Hassk (Asteraceae) were screened for the antibacterial and antifungal activities against different species of human pathogenic bacterial ATCC, antibiotic-resistant clinical isolates and strains of the dermatophyte Trichophyton rubrum (wild and mutant for TruMDR2 gene) using a microdilution method. Demethylwedelolactone/wedelolactone (DWL/WL) and only wedelolactone (WL), both in a high homogeneity degree, were efficient to inhibit the ATCC strains of Staphylococus aureus (Minimal Inhibitory Concentration MIC = 75 mu g/mL), Staphylococcus epidemidis (MIC = 125 mu g/mL) and Escherichia coli (MIC = 125 mu g/mL) as well as antibiotic-resistant clinical isolates of Enterococcus spp (MIC = 250 mu g/mL) and S. aureus (MIC = 125 mu g/mL). Ethanol extract was more effective than the purified fractions against Trichophyton rubrum strains (MIC = 125 mu g/mL), suggesting that anti-fungal activity is not only related to demethylwedelolactone and wedelolactone, but also to a synergistic action between these coumestans and other compounds found in that extract. Thus, this work suggests that E. alba possesses a significant antimicrobial activity, including that against multi-drug resistant microorganisms, which could be of relevance for the treatment of infectious diseases.

The population structure of Trypanosoma cruzi: expanded analysis of 54 strains using eight polymorphic CA-repeat microsatellites

Recently we cloned and sequenced the first eight Trypanosoma cruzi polymorphic microsatellite loci and studied 31 clones and strains to obtain valuable information about the population structure of the parasite. We have now studied 23 further strains, increasing from 11 to 31 the number of strains obtained from patients with chronic Chagas disease. This expanded set of 54 strains and clones analyzed with the eight microsatellites markers confirmed the previously observed diploidy, clonal population organization and very high polymorphism of T. cruzi. Moreover, this new study disclosed two new features of the population genetic structure of T. cruzi. The first was the discovery that, similarly to what we had previously shown for strains isolated from insect vectors, mammals and humans with acute disease, isolates from patients in the chronic phase of Chagas disease could also be multiclonal, albeit at a reduced proportion. Second, when we used parsimony to display the genetic relationship among the clonal lineages in an unrooted Wagner network we observed, like before, a good correlation of the tree topography with the classification in three clusters on the basis of single locus analysis of the ribosomal RNA genes. However, a significant new finding was that now the strains belonging to cluster 2 split in two distant sub-clusters. This observation suggests that the evolutionary history of T. cruzi may be more complex than we previously thought.

Molecular karyotype and chromosomal localization of genes encoding ß-tubulin, cysteine proteinase, hsp 70 and actin in Trypanosoma rangeli

The molecular karyotype of nine Trypanosoma rangeli strains was analyzed by contour-clamped homogeneous electric field electrophoresis, followed by the chromosomal localization of ß-tubulin, cysteine proteinase, 70 kDa heat shock protein (hsp 70) and actin genes. The T. rangeli strains were isolated from either insects or mammals from El Salvador, Honduras, Venezuela, Colombia, Panama and southern Brazil. Also, T. cruzi CL-Brener clone was included for comparison. Despite the great similarity observed among strains from Brazil, the molecular karyotype of all T. rangeli strains analyzed revealed extensive chromosome polymorphism. In addition, it was possible to distinguish T. rangeli from T. cruzi by the chromosomal DNA electrophoresis pattern. The localization of ß-tubulin genes revealed differences among T. rangeli strains and confirmed the similarity between the isolates from Brazil. Hybridization assays using probes directed to the cysteine proteinase, hsp 70 and actin genes discriminated T. rangeli from T. cruzi, proving that these genes are useful molecular markers for the differential diagnosis between these two species. Numerical analysis based on the molecular karyotype data revealed a high degree of polymorphism among T. rangeli strains isolated from southern Brazil and strains isolated from Central and the northern South America. The T. cruzi reference strain was not clustered with any T. rangeli strain.

Human mixed infections of Leishmania spp. and Leishmania-Trypanosoma cruzi in a sub Andean Bolivian area: identification by polymerase chain reaction/hybridization and isoenzyme

Parasites belonging to Leishmania braziliensis, Leishmania donovani, Leishmania mexicana complexes and Trypanosoma cruzi (clones 20 and 39) were searched in blood, lesions and strains collected from 28 patients with active cutaneous leishmaniasis and one patient with visceral leishmaniasis. PCR-hybridization with specific probes of Leishmania complexes (L. braziliensis, L. donovani and L. mexicana) and T. cruzi clones was applied to the different DNA samples. Over 29 patients, 8 (27.6%) presented a mixed infection Leishmania complex species, 17 (58.6%) a mixed infection Leishmania-T. cruzi, and 4 (13.8%) a multi Leishmania-T. cruzi infection. Several patients were infected by the two Bolivian major clones 20 and 39 of T. cruzi (44.8%). The L. braziliensis complex was more frequently detected in lesions than in blood and a reverse result was observed for L. mexicana complex. The polymerase chain reaction-hybridization design offers new arguments supporting the idea of an underestimated rate of visceral leishmanisis in Bolivia. Parasites were isolated by culture from the blood of two patients and lesions of 10 patients. The UPGMA (unweighted pair-group method with arithmetic averages) dendrogram computed from Jaccard's distances obtained from 11 isoenzyme loci data confirmed the presence of the three Leishmania complexes and undoubtedly identified human infections by L. (V.) braziliensis, L. (L.) chagasi and L. (L.) mexicana species. Additional evidence of parasite mixtures was visualized through mixed isoenzyme profiles, L. (V.) braziliensis-L. (L.) mexicana and Leishmania spp.-T. cruzi.The epidemiological profile in the studied area appeared more complex than currently known. This is the first report of parasitological evidence of Bolivian patients with trypanosomatidae multi infections and consequences on the diseases' control and patient treatments are discussed.

Genetic characterization of morphologically variant strains of Paracoccidioides brasiliensis

Molecular characterization of Paracoccidioides brasiliensis variant strains that had been preserved under mineral oil for decades was carried out by random amplified polymorphic DNA analysis (RAPD). On P. brasiliensis variants in the transitional phase and strains with typical morphology, RAPD produced reproducible polymorphic amplification products that differentiated them. A dendrogram based on the generated RAPD patterns placed the 14 P. brasiliensis strains into five groups with similarity coefficients of 72%. A high correlation between the genotypic and phenotypic characteristics of the strains was observed. A 750 bp-RAPD fragment found only in the wild-type phenotype strains was cloned and sequenced. Genetic similarity analysis using BLASTx suggested that this RAPD marker represents a putative domain of a hypothetical flavin-binding monooxygenase (FMO)-like protein of Neurospora crassa.

Detection and phylogenetic analysis of porcine enteric calicivirus, genetically related to the Cowden strain of sapovirus genogroup III, in Brazilian swine herds

Sapovirus of the Caliciviridae family is an important agent of acute gastroenteritis in children and piglets. The Sapovirus genus is divided into seven genogroups (G), and strains from the GIII, GVI and GVII are associated with infections in swine. Despite the high prevalence in some countries, there are no studies related to the presence of porcine enteric sapovirus infections in piglets in Brazil. In the present study, 18 fecal specimens from piglets up to 28 days were examined to determine the presence of sapovirus genome by RT-PCR assay, using primers designed to amplify a 331 bp segment of the RNA polymerase gene. In 44.4% (8/18) of fecal samples, an amplified DNA fragment was obtained. One of these fragments was sequenced and submitted to molecular and phylogenetic analysis. This analysis revealed high similarity, with nucleotides (87%) and amino acids (97.8%), to the Cowden strain, the GIII prototype of porcine enteric calicivirus. This is the first description of sapovirus in Brazilian swine herds.

Role of rpoS in the Development of Cell Envelope Resilience and Pressure Resistance in Stationary-Phase Escherichia coli

This work investigated the role of rpoS in the development of increased cell envelope resilience and enhanced pressure resistance in stationary phase cells of Escherichia coli. Loss of both colony-forming ability and membrane integrity, measured as uptake of propidium iodide (PI), occurred at lower pressures in E. coli BW3709 (rpoS) than in the parental strain (BW2952). The rpoS mutant also released much higher concentrations of protein under pressure than the parent. We propose that RpoS-regulated functions are responsible for the increase in membrane resilience as cells enter stationary phase and that this plays a major role in the development of pressure resistance. Strains from the Keio collection with mutations in two RpoS-regulated genes, cfa (cyclopropane fatty acyl phospholipid synthase) and osmB (outer membrane lipoprotein), were significantly more pressure-sensitive and took up more PI than the parent strains with cfa having the greatest effect. Mutations in the bolA morphogene and other RpoS-regulated lipoprotein genes (osmC, osmE, osmY and ybaY) had no effect on pressure resistance. The cytoplasmic membranes of the rpoS mutant failed to reseal after pressure treatment and strains with mutations in osmB and nlpI (new lipoprotein) were also somewhat impaired in the ability to reseal their membranes. The cfa mutant, though pressure-sensitive, was unaffected in membrane resealing implying that the initial transient permeabilization event is critical for loss of viability rather than the failure to reseal. The enhanced pressure sensitivity of polA, recA and xthA mutants suggested that DNA may be a target of oxidative stress in pressure-treated cells.

Variation in the sensitivity of Callosobruchus (Coleoptera: Bruchidae) acetylcholinesterase to the organophosphate insecticide malaoxon: effect of species, geographical strain and food type

BACKGROUND: Bruchid beetles, Callosobruchus species, are serious pests of economically important grain legumes; their activity in stores is often controlled by use of synthetic insecticides. Esterases are known to be involved in insecticide resistance in insects. However, there is dearth of information on esterase activity in the genus Callosobruchus. In this study we investigated the effect of species, geographical strain and food type on the variation of acetylcholinesterase (AChE) activity and its inhibition by malaoxon (malathion metabolite) using an in vitro spectrophotometric method. RESULT: AChE activity varied significantly among species and strains and also among legume type used for rearing them. Generally irrespective of species, strain or food type, the higher the AChE activity of a population, the higher its inhibition by malaoxon. C. chinensis had the highest AChE activity of the species studied and in the presence of malaoxon it had the lowest remaining AChE activity, while C. rhodesianus retained the highest activity. CONCLUSION: A firsthand knowledge of AChE activity in regional Callosobruchus in line with the prevailing food types should be of utmost importance to grain legume breeders, researchers on plant materials for bruchid control and pesticide manufacturer/applicators for a robust integrated management of these bruchids.

Use of virulence determinants and seropathotypes to distinguish high- and low-risk Escherichia coli O157 and non-O157 isolates from Europe

The presence of 10 virulence genes was examined using polymerase chain reaction (PCR) in 365 European O157 and non-O157 Escherichia coli isolates associated with verotoxin production. Strain-specific PCR data were analysed using hierarchical clustering. The resulting dendrogram clearly separated O157 from non-O157 strains. The former clustered typical high-risk seropathotype (SPT) A strains from all regions, including Sweden and Spain, which were homogenous by Cramer's V statistic, and strains with less typical O157 features mostly from Hungary. The non-O157 strains divided into a high-risk SPTB harbouring O26, O111 and O103 strains, a group pathogenic to pigs, and a group with few virulence genes other than for verotoxin. The data demonstrate SPT designation and selected PCR separated verotoxigenic E. coli of high and low risk to humans; although more virulence genes or pulsed-field gel electrophoresis will need to be included to separate high-risk strains further for epidemiological tracing.

Effect of porcine reproductive and respiratory syndrome virus on subsequent Pasteurella multocida challenge in pigs

This trial was conducted to evaluate the effect of Porcine reproductive and respiratory syndrome virus (PRRSv) on a subsequent challenge with Pasteurella multocida in pigs. Sixteen, 3-4 week-old piglets, from a PRRSv and Aujeszky disease virus (ADV) free herd were used. Animals were equally and randomly allocated in four groups which were treated according the following schedule: Group I: negative controls; Group II: inoculation with only PRRSV; Group III: inoculation with PRRSV and P. multocida; Group IV: inoculation with ADV and multocida (positive controls), PRRSV and ADV were inoculated intranasally, at the doses of 10(4.6) and 10(4.5) TCID50/ml, respectively. Five days later, pigs from groups III and IV were inoculated intranasally, with two ml of a 10(9) CFU/mL suspension of equal parts of P. multocida, strains A52 and A24. No lesions were observed in piglets of group I. Microscopically, interstitial pneumonia was identified in all piglets of groups II and III and 3/4 piglets from group IV. Bronchopneumonia was detected in 3/4 of the piglets from group III and in all animals of group TV which, additionally, showed meningo-encephalitis and purulent rhinitis. Macroscopically, only piglets of groups III and IV had lung consolidation. However, much lower pneumonic scores (2.3%) were observed in group III, where 3 of 4 piglets were affected. on the other hand, all piglets of group IV showed some degree of pulmonary consolidation, with a mean score of 13.7%. Based on these results, it appears that the role of PRRSV as a initiator of secondary diseases is still undefined, but is probably mild, There was no clear interaction between PRRSV and Pasteurella multocida under the conditions and strains tested here. (C) 1997 Elsevier B.V. B.V.

Geotechnical and structural behavior of the railroad track in large-scale apparatus

This paper analyses the static and dynamic behavior of the railroad track model in laboratory. Measurements of stresses and strains on a large-scale railroad track apparatus were studied. The model includes: compacted soil, representing the final layers of platform, ballast layer, and ties (steel, wooden, and pre-stressed concrete). The soil and soil ballast interface were instrumented with pneumatic stress gauge. Settlement measurement device were positioned at the same levels as the load cells. Loads were applied by hydraulic actuators, statically and dynamically. After the prescribed number of load cycles, in pre-determined intervals, stresses and strains were measured. Observations indicate that stress and strain distributions, transmitted by wooden or steel ties, behave similarly. A more favorable behavior was observed with pre-stressed concrete mono block ties. Non-linear response was observed after a threshold numbers of cycles were surpassed, showing that the strain modulus increases with the numbers of cycles. © 2009 IOS Press.

Photoelastic stress analysis of splinted and unitary implant-supported prostheses

The aim of this study was to evaluate the effects that splinting and different lengths of implants have on the stress distribution in implant-supported prostheses by photoelastic analysis. A total of five photoelastic resin models were made with different proposed situations, and 400 load applications were performed for the analysis. Compared with the unitary prosthesis, the splinted implant-supported prosthesis acted favorably in the distribution of stresses and strains to the implant (p < 0.001). The increase in length was a significant factor in the stress distribution (p < 0.05) and, ultimately, the overall reduction in stress. It was concluded that the splinted implant-supported prosthesis behaved better biomechanically compared with the unitary prosthesis.

Bone stress and strain after use of a miniplate for molar protraction and uprighting: a 3-dimensional finite element analysis

The aim of this study was to use the finite element method to evaluate the distribution of stresses and strains on the local bone tissue adjacent to the miniplate used for anchorage of orthodontic forces. Methods: A 3-dimensional model composed of a hemimandible and teeth was constructed using dental computed tomographic images, in which we assembled a miniplate with fixation screws. The uprighting and mesial movements of the mandibular second molar that was anchored with the miniplate were simulated. The miniplate was loaded with horizontal forces of 2, 5, and 15 N. A moment of 11.77 N.mm was also applied. The stress and strain distributions were analyzed, and their correlations with the bone remodeling criteria and miniplate stability were assessed. Results: When orthodontic loads were applied, peak bone strain remained within the range of bone homeostasis (100-1500 mu m strain) with a balance between bone formation and resorption. The maximum deformation was found to be 1035 mu m strain with a force of 5 N. At a force of 15 N, bone resorption was observed in the region of the screws. Conclusions: We observed more stress concentration around the screws than in the cancellous bone. The levels of stress and strain increased when the force was increased but remained within physiologic levels. The anchorage system of miniplate and screws could withstand the orthodontic forces, which did not affect the stability of the miniplate.

Performance evaluation of low environmental impact asphalt concretes using the mechanistic empirical design method based on laboratory fatigue and permanent deformation models

The "sustainability" concept relates to the prolonging of human economic systems with as little detrimental impact on ecological systems as possible. Construction that exhibits good environmental stewardship and practices that conserve resources in a manner that allow growth and development to be sustained for the long-term without degrading the environment are indispensable in a developed society. Past, current and future advancements in asphalt as an environmentally sustainable paving material are especially important because the quantities of asphalt used annually in Europe as well as in the U.S. are large. The asphalt industry is still developing technological improvements that will reduce the environmental impact without affecting the final mechanical performance. Warm mix asphalt (WMA) is a type of asphalt mix requiring lower production temperatures compared to hot mix asphalt (HMA), while aiming to maintain the desired post construction properties of traditional HMA. Lowering the production temperature reduce the fuel usage and the production of emissions therefore and that improve conditions for workers and supports the sustainable development. Even the crumb-rubber modifier (CRM), with shredded automobile tires and used in the United States since the mid 1980s, has proven to be an environmentally friendly alternative to conventional asphalt pavement. Furthermore, the use of waste tires is not only relevant in an environmental aspect but also for the engineering properties of asphalt [Pennisi E., 1992]. This research project is aimed to demonstrate the dual value of these Asphalt Mixes in regards to the environmental and mechanical performance and to suggest a low environmental impact design procedure. In fact, the use of eco-friendly materials is the first phase towards an eco-compatible design but it cannot be the only step. The eco-compatible approach should be extended also to the design method and material characterization because only with these phases is it possible to exploit the maximum potential properties of the used materials. Appropriate asphalt concrete characterization is essential and vital for realistic performance prediction of asphalt concrete pavements. Volumetric (Mix design) and mechanical (Permanent deformation and Fatigue performance) properties are important factors to consider. Moreover, an advanced and efficient design method is necessary in order to correctly use the material. A design method such as a Mechanistic-Empirical approach, consisting of a structural model capable of predicting the state of stresses and strains within the pavement structure under the different traffic and environmental conditions, was the application of choice. In particular this study focus on the CalME and its Incremental-Recursive (I-R) procedure, based on damage models for fatigue and permanent shear strain related to the surface cracking and to the rutting respectively. It works in increments of time and, using the output from one increment, recursively, as input to the next increment, predicts the pavement conditions in terms of layer moduli, fatigue cracking, rutting and roughness. This software procedure was adopted in order to verify the mechanical properties of the study mixes and the reciprocal relationship between surface layer and pavement structure in terms of fatigue and permanent deformation with defined traffic and environmental conditions. The asphalt mixes studied were used in a pavement structure as surface layer of 60 mm thickness. The performance of the pavement was compared to the performance of the same pavement structure where different kinds of asphalt concrete were used as surface layer. In comparison to a conventional asphalt concrete, three eco-friendly materials, two warm mix asphalt and a rubberized asphalt concrete, were analyzed. The First Two Chapters summarize the necessary steps aimed to satisfy the sustainable pavement design procedure. In Chapter I the problem of asphalt pavement eco-compatible design was introduced. The low environmental impact materials such as the Warm Mix Asphalt and the Rubberized Asphalt Concrete were described in detail. In addition the value of a rational asphalt pavement design method was discussed. Chapter II underlines the importance of a deep laboratory characterization based on appropriate materials selection and performance evaluation. In Chapter III, CalME is introduced trough a specific explanation of the different equipped design approaches and specifically explaining the I-R procedure. In Chapter IV, the experimental program is presented with a explanation of test laboratory devices adopted. The Fatigue and Rutting performances of the study mixes are shown respectively in Chapter V and VI. Through these laboratory test data the CalME I-R models parameters for Master Curve, fatigue damage and permanent shear strain were evaluated. Lastly, in Chapter VII, the results of the asphalt pavement structures simulations with different surface layers were reported. For each pavement structure, the total surface cracking, the total rutting, the fatigue damage and the rutting depth in each bound layer were analyzed.