Emergência de plântulas de Erythrina velutina em diferentes posições e profundidades de semeadura

Com o objetivo de estudar a influência da posição e da profundidade de semeadura sobre a emergência de plântulas e o vigor de sementes de mulungu foram instalados testes de germinação em areia sob ambiente protegido. Os tratamentos, representados pela posição e pela profundidade de semeadura das sementes em relação ao substrato foram os seguintes: semente com o hilo voltado para baixo, para cima e para o lado nas profundidades de 1 a 5cm. Cada um dos tratamentos constou de quatro repetições de 25 sementes, avaliados pelo teste de emergência, vigor da primeira contagem, velocidade de emergência, comprimento e massa seca do hipocótilo e das raízes. Os resultados mostraram que, para o mulungu, a profundidade de semeadura dever ser entre 1 e 2cm e, a melhor posição foi aquela em que as sementes ficaram com o hilo voltado para baixo.

Desenvolvimento de cultivares de mamoneiras em relação à profundidade de semeadura e seletividade de herbicidas dinitroanilinas

Three trials were carry out at Garca Municipal County, São Paulo, Brazil in order to study the effects of sowing depth of three castor bean cultivars submitted or not to dinitroaniline herbicides application in pre-emergency. The three cultivars chosen as fllow: AL Guarany 2002 variety and Iris and Savana hybrids. The experiments were disposed in randomized complete blocks, with fifteen treatments and four replications, by using factorial scheme 5x3, composed by sowing in 2,5; 5,0; 10,0; 15,0 and 20,0 cm depths with application in pre-emergency condition of the herbicides: trifluralin (1125 g a.i. ha(-1)), pendimethalin (1500 g a.i. ha(-1)) and check without herbicide (hand-hold check). Only the sowing depths of 2.5 and 20.0 significantly reduced the initial development of castor bean cultivars AL Guarany 2002 and Iris, without interfering in characteristics number of leaves, stem diameter, insertion height of first raceme and yield. Trifluralin application has increased significantly AL Guarany 2002 yield, in sowings from 5.0 cm deep, unlike Iris and Savana hybrids, where most of sowing depths studied, resulted in yield declines. Pendimethalin herbicide presented high selectivity mainly for AL Guarany 2002 and Savana cultivars, characterizing, generally as the safest option castor bean crop.

Emergência de Rottboellia exaltata influenciada pela profundidade de semeadura, quantidade de palha de cana sobre o solo e aplicação de herbicidas residuais

Mechanical sugarcane harvest without burning and continuous straw on the soil surface may affect the Rottboellia exaltata infestation dynamics in sugarcane fields. Three greenhouse experiments were conducted with the aim of studying the effects of sowing depth (0, 2.5, 5, 7.5, and 10 cm), amount of sugarcane straw on the soil surface (0, 5, 10, and 15 ton ha-1), and residual herbicide (clomazone, flumioxazin, imazapyr, isoxaflutole, and s-metolachlor) on the emergence of Rottboellia exaltata. For each experiment, a completely randomized design with four replicates was applied. The combination of mulch on soil surface (especially with larger amounts of straw) with deeper sowing depths provides less emergence and mass accumulation of R. exaltata. In bare soil, the sowing depth did not affect the weed dynamics. Clomazone and imazapyr were effective herbicides controlling R. exaltata regardless of the amount of straw on the soil surface. Flumioxazin was also effective in controlling R. exaltata but only under bare soil conditions. Even with 60 mm of accumulated rainfall over the 4 day period after application, the amount of flumioxazin leached to the soil was not enough to ensure the same control observed when applying the herbicide on bare soil.

Aspectos ecofisiológicos e genético de biótipos de Digitaria insularis resistente e suscetível ao glyphosate

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Distribuição longitudinal e produtividade do milho em função da velocidade de deslocamento e da profundidade de deposição da semente

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Morfo-anatomia, dormência, germinação e emergência de plântulas de tento (Ormosia paraensis Ducke – Fabaceae)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Intensidades luminosas e profundidade de Semeadura na emergência e desenvolvimento de espécies de plantas daninhas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Qualidade da semeadura e do arranquio mecanizado do amendoim

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Profundidades de semeadura e espaçamentos entre plantas na cultura do milho

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Desempenho de sulcadores no desenvolvimento e produtividade da soja em solo submetido a diferentes níveis de compactação

On the national scene, soybean crop occupies a prominent position in cultivated area and volume production, being cultivated largely in the no tillage system. This system, due to the intense traffic of machines and implements on its surface has caused soil compaction problems, which has caused the yield loss of crops. In order to minimize this effect the seeder-drill uses the systems to opening the furrow by shank or the double disc type. The use of the shank has become commonplace for allowing the disruption of the compacted surface layer, however requires greater energy demand and may cause excessive tillage in areas where there is not observed high levels of compaction. Thus, this study aimed to evaluate the effects of furrowers mechanisms and levels of soil compacting on traction requirement by a seeder-drill and on the growing and productivity of soybean in an Oxisol texture clay, in a two growing seasons. The experimental design consisted of randomized blocks with split plots with the main plots composed of four levels of soil compaction (N0 – no tillage without additional compaction, N1, N2 and N3 – no tillage subjected to compaction through two, four and six passes with tractor, respectively) corresponding to densities of soil 1.16, 1.20, 1.22 and 1.26 g cm-3, and subplots by two furrowers mechanisms (shank and double disc) with four replicates. To evaluate the average, maximum and specific traction force requested by the seeder-drill, was used a load cell, with capacity of 50 kN and sensitivity of 2 mV V-1, coupled between the tractor and seeder-drill, whose data are stored in a datalogger system model CR800 of Campbell Scientific. In addition, were evaluated the bulk density, soil mechanical resistance to penetration, sowing depth, depth and groove width, soil area mobilized, emergence speed index, emergence operation, final plant stand, stem diameter, plant height, average number of seeds per pod, weight of 1,000 seeds, number of pods per plant and crop productivity. Data were subjected to analysis of variance, the mean of furrowers were compared by Tukey test (p≤0.05), while for the factor soil compaction, polynomial regression analysis was adopted, selected models by the criterion of greater R2 and significance (p≤0.05) of equation parameters. Regardless of the crop season, penetration resistance increase as soil compaction levels up to around 0.20 m deep, and bulk density influenced the sowing quality parameters, however, did not affect the crop yield. In the first season, there was a higher productivity with the use of the shank type. In the second crop season, the shank demanded greater energetic requirement with the increase of bulk density and opposite situation with the double disc. The locking of sowing lines allow better performance of the shank to break the compacted layer.

Flowering synchronization in hybrid rice parental lines.

The cultivation of hybrid rice is a technology that allows for an increase in grain yield of 30% relative to the grain yield of conventional cultivars. However, the main challenge for this technology is related to seed production, which has high production costs and low seed yields. Therefore, agronomic techniques that could enhance flowering synchrony of parental lines in the field are essential for an efficient production system of hybrid rice seeds. The objective of this work was to study the effects of sowing depth, plant density and fertilization with nitrogen or phosphorus as potential techniques to increase the pollen availability in the field and, consequently, the flowering synchrony between parental lines in the production of hybrid rice seeds. The experiments were conducted during two growing seasons in the Central Region of Brazil. All of the experiments were conducted as a randomized complete block in a split plot scheme; however, the experiment with P fertilization had a factorial design. Our research allow inferring that nitrogen fertilization technique applied to the soil or foliar at the time of panicle differentiation does not affect the time of onset of flowering of rice varieties INTA Puitá CL and L106R, which are potential R lines for the production of hybrid rice. Agronomic techniques of variation in sowing depth, seeding rate and the phosphate fertilization affect the time of onset of flowering from 10 to 19 degree-days, which could represent two days in the crop cycle, for the line L106R. Such techniques constitute potential alternatives for use in hybrid rice seed production systems and could be applied in alternated blocks of R lines in the field to obtain longer periods of pollen availability in the field.

Oxisol resistence to penetration in no-till system after sowing

If inappropriately conducted, management and sowing practices may compromise the environment and the profitability of the agricultural activity. The aim of this study was to analyze the furrow opener mechanisms action and the level of load applied to soil firming mechanism in no-till, on the Oxisol resistance to penetration during soybean sowing, under three soil moistures. The experiment was arranged in split-split plot design, in which the plots were composed by three soil moistures (23.8; 25.5 and 27.5% b.s.), two furrow opener mechanisms sub-plots (double disks and furrow plough) and the split-split plot of three levels of load applied to soil firming mechanism (12.2; 18.5 and 24.1 kPa), according to randomized blocks design, with three replications. The soil moisture provided different resistance behavior to penetration with the depth, on the seedbed, independently of the furrow opener and the level of load applied to soil firming mechanism. The furrow plough use provided less soil resistance to penetration when compared to the double disk furrow opener, on the seedbed, independently of the soil moisture and the level of load applied to soil firming mechanism. The pressure applied by soil firming mechanism of 18.5 kPa provided the lower resistance to penetration, when the furrow plough was used. The soil resistance to penetration was less on the sowing line than on between rows, with 20 cm deep.

Total nitrogen from solid phase in the Jena Experiment (Block 2 Main Experiment up to 100cm depth, year 2002)

This data set contains measurements of total nitrogen from the main experiment plots of a large grassland biodiversity experiment (the Jena Experiment; see further details below). In the main experiment, 82 grassland plots of 20 x 20 m were established from a pool of 60 species belonging to four functional groups (grasses, legumes, tall and small herbs). In May 2002, varying numbers of plant species from this species pool were sown into the plots to create a gradient of plant species richness (1, 2, 4, 8, 16 and 60 species) and functional richness (1, 2, 3, 4 functional groups). Plots were maintained by bi-annual weeding and mowing. Soil sampling and analysis: Stratified soil sampling to a depth of 1m was performed before sowing in April 2002. Three independent samples per plot were taken of all plots in block 2 using a motor-driven soil column cylinder (Cobra, Eijkelkamp, 8.3 cm in diameter). Soil samples were dried at 40°C and segmented to a depth resolution of 5 cm giving 20 depth subsamples per core. All samples were analyzed independently. All soil samples were passed through a sieve with a mesh size of 2 mm. Rarely present visible plant remains were removed using tweezers. Total nitrogen concentration was analyzed on ball-milled subsamples (time 4 min, frequency 30 s-1) by an elemental analyzer at 1150°C (Elementaranalysator vario Max CN; Elementar Analysensysteme GmbH, Hanau, Germany).

Soil carbon in the Jena Experiment (all blocks Main Experiment up to 30cm depth, year 2002)

This data set contains soil carbon measurements (Organic carbon, inorganic carbon, and total carbon; all measured in dried soil samples) from the main experiment plots of a large grassland biodiversity experiment (the Jena Experiment; see further details below). In the main experiment, 82 grassland plots of 20 x 20 m were established from a pool of 60 species belonging to four functional groups (grasses, legumes, tall and small herbs). In May 2002, varying numbers of plant species from this species pool were sown into the plots to create a gradient of plant species richness (1, 2, 4, 8, 16 and 60 species) and functional richness (1, 2, 3, 4 functional groups). Plots were maintained by bi-annual weeding and mowing. Soil sampling and analysis: Stratified soil sampling was performed before sowing in April 2002. Five independent samples per plot were taken using a split tube sampler with an inner diameter of 4.8 cm (Eijkelkamp Agrisearch Equipment, Giesbeek, the Netherlands). Soil samples were dried at 40°C and then segmented to a depth resolution of 5 cm giving six depth subsamples per core. All samples were analyzed independently and averaged values per depth layer are reported. Soil samples were passed through a sieve with a mesh size of 2 mm. Rarely present visible plant remains were removed using tweezers. Total carbon concentration was analyzed on ball-milled subsamples (time 4 min, frequency 30 s-1) by an elemental analyzer at 1150°C (Elementaranalysator vario Max CN; Elementar Analysensysteme GmbH, Hanau, Germany). We measured inorganic carbon concentration by elemental analysis at 1150°C after removal of organic carbon for 16 h at 450°C in a muffle furnace. Organic carbon concentration was calculated as the difference between both measurements of total and inorganic carbon.

Soil carbon in the Jena Experiment from intensive sampling campaigns (only block 2 Main Experiment up to 1 m depth, year 2007)

This data set contains soil carbon measurements (Organic carbon, inorganic carbon, and total carbon; all measured in dried soil samples) from the main experiment plots of a large grassland biodiversity experiment (the Jena Experiment; see further details below). In the main experiment, 82 grassland plots of 20 x 20 m were established from a pool of 60 species belonging to four functional groups (grasses, legumes, tall and small herbs). In May 2002, varying numbers of plant species from this species pool were sown into the plots to create a gradient of plant species richness (1, 2, 4, 8, 16 and 60 species) and functional richness (1, 2, 3, 4 functional groups). Plots were maintained by bi-annual weeding and mowing. Stratified soil sampling to a depth of 1 m was repeated in April 2007 (as had been done before sowing in April 2002). Three independent samples per plot were taken of all plots in block 2 using a motor-driven soil column cylinder (Cobra, Eijkelkamp, 8.3 cm in diameter). Soil samples were dried at 40°C and segmented to a depth resolution of 5 cm giving 20 depth subsamples per core. All samples were analyzed independently. All soil samples were passed through a sieve with a mesh size of 2 mm. Because of much higher proportions of roots in the soil, the samples in 2007 were further sieved to 1 mm according to common root removal methods. No additional mineral particles were removed by this procedure. Total carbon concentration was analyzed on ball-milled subsamples (time 4 min, frequency 30 s**-1) by an elemental analyzer at 1150°C (Elementaranalysator vario Max CN; Elementar Analysensysteme GmbH, Hanau, Germany). We measured inorganic carbon concentration by elemental analysis at 1150°C after removal of organic carbon for 16 h at 450°C in a muffle furnace. Organic carbon concentration was calculated as the difference between both measurements of total and inorganic carbon.