Responses of transplanted native tree species to invasive alien grass removals in an abandoned cattle pasture in the Lacandon region, Mexico

We tested the early performance of 16 native early-, mid-, and late-successional tree species in response to four intensities of grass removal in an abandoned cattle pasture dominated by the introduced, invasive African grass, Cynodon plectostachyus, within the Lacandon rainforest region, southeast Mexico. The increase in grass removals significantly improved the performance of many species, especially of early-and mid-successional species, while performance of late-successional species was relatively poor and did not differ significantly among treatments. Good site preparation and at least one additional grass removal four months after seedling transplant were found to be essential; additional grass removals led to improved significantly performance of saplings in most cases. In order to evaluate the potential of transplanting tree seedlings successfully in abandoned tropical pastures, we developed a "planting risk index", combining field performance measurements and plantation cost estimations. Our results showed a great potential for establishing restoration plantings with many early-and mid-successional species. Although planting risk of late-successional species was considered high, certain species showed some possibilities of acclimation after 18 months and should be considered in future plantation arrangements in view of their long-term contributions to biodiversity maintenance and also to human welfare through delivery of ecosystem services. Conducting a planting risk analysis can help avoid failure of restoration strategies involving simultaneous planting of early-, mid-, and late-successional tree species. This in turn will improve cost-effectiveness of initial interventions in large-scale, long-term restoration programs.

Quality and quantity of bone following alveolar distraction osteogenesis in the human mandible

PURPOSE: The purpose of this prospective study on humans were to evaluate (a) the clinical outcome of alveolar distraction osteogenesis for the correction of vertically deficient edentulous mandibular ridges, (b) the clinical outcome of dental implants placed in the distracted areas, and (c) the quality and quantity of the bone that had formed in the distraction gap. MATERIAL AND METHODS: Seven patients presenting vertically deficient edentulous ridges were treated by means of distraction osteogenesis with an intraoral alveolar distractor. Approximately 3 months after consolidation of the distracted segments, 20 ITI solid screw SLA implants were placed in the distracted areas. Three to 4 months later, abutments were connected and prosthetic loading of the implants started. During implant site preparation, bone biopsies were taken at the implant sites with trephine burrs for histologic and histometric analyses. RESULTS: The mean follow-up after the initial prosthetic loading was 18 months (range 12-24 months). The mean bone gain obtained at the end of distraction was 7 mm (range 5-9 mm). The cumulative success rate of implants 2 years after the onset of prosthetic loading was 95%, whereas the survival rate of implants was 100%. The newly formed bone consisted of woven bone reinforced by parallel-fibered bone with bone marrow spaces between the bone trabeculae. The bone area fraction in the distraction region ranged from 21.6% to 57.8% (38.5+/-11.7%). DISCUSSION AND CONCLUSIONS: Results from this study showed that (a) distraction osteogenesis is a reliable technique for the correction of vertically deficient edentulous ridges, (b) the regenerated bone withstood the functional demands of implant loading, (c) survival and success rates of implants placed in the distracted areas were consistent with those of implants placed in native bone, and (d) there is sufficient bone volume and maturity in the distracted region for primary stability of the implant.

The Cardica C-Port System: clinical and angiographic evaluation of a new device for automated, compliant distal anastomoses in coronary artery bypass grafting surgery--a multicenter prospective clinical trial

OBJECTIVES: The C-Port System (Cardica, Inc, Redwood City, Calif) integrates in one tool all functions necessary to enable rapid automated distal coronary anastomoses. The goal of this prospective, nonrandomized, and multicenter study is to determine the safety and efficacy of this novel anastomotic system. METHODS: Five centers enrolled 133 patients awaiting elective coronary artery bypass grafting surgery. Outcome variables were intraoperative device performance, incidence of device-related adverse events, predischarge and 6-month angiographic graft patency, and 12-month clinical outcome. Independent core laboratories performed qualitative and quantitative angiographic and computed tomographic assessments. RESULTS: The C-Port was used to perform a vein-to-coronary anastomosis in 130 patients. Intraoperative conversion to a hand-sewn anastomosis was necessary in 11 patients because of inadequate target site preparation, inappropriate target vessel selection, or both. Inadequate blood flow related to poor runoff required conversion in 3 additional patients. Three patients died before discharge of causes unrelated to the device. At discharge, 113 patients had a C-Port implant in place, and 104 C-Port anastomoses were studied by means of angiography, resulting in 100 FitzGibbon A, 3 FitzGibbon B, and 1 FitzGibbon 0 classifications. At 6 months, one additional patient died of a device-unrelated cause, and 98 patients were evaluated by means of angiography (n = 89). Overall patency (FitzGibbon A) was 92.1%. Three C-Port anastomoses were rated FitzGibbon B, and 4 were rated FitzGibbon 0. At 12 months, 107 (98.2%) of 109 alive patients were followed up, without any reports of device-related major adverse cardiac events. CONCLUSIONS: The C-Port System allows for a rapid, reliable, and compliant distal anastomosis and yields favorable 6-month angiographic and 12-month clinical results when compared with published studies.

La regeneración natural del pino silvestre (Pinus sylvestris L.) en el Valle del Lozoya (Madrid): germinación y supervivencia inicial

La fase de establecimiento del regenerado es un proceso crítico para el desarrollo posterior de la masa tanto por las elevadas tasas de mortalidad que habitualmente lleva asociadas, como por proporcionar el material de partida del que van a disponer las fases subsiguientes. Las restricciones a la germinación y establecimiento de la regeneración del pino silvestre varían enormemente entre las distintas regiones de su extensa área de distribución geográfica. La región Mediterránea constituye un hábitat marginal de la especie en el que las condiciones ecológicas son muy diferentes a las del grueso de su área de distribución. Frente a otras limitaciones (frío, luz, encharcamiento…), en el entorno mediterráneo la tasa de mortalidad parece estar asociada a las condiciones micrometeorológicas del período estival - particularmente, a la sequía -, así como a la presencia excesiva de ganado o ungulados silvestres. No obstante, la mayoría de la información disponible sobre el proceso de regeneración de la especie procede del centro y norte de Europa, por lo que no es de aplicación directa en nuestra región, en la que los estudios de este tipo son mucho más escasos. El presente trabajo pretende contribuir a paliar esta relativa escasez a través del estudio del proceso de regeneración natural en el monte “Cabeza de Hierro”, masa irregular por bosquetes de pino silvestre, paradigma de gestión sostenible y uso múltiple. En este entorno, se pretende caracterizar y cuantificar tanto el proceso de germinación y supervivencia de la especie como la influencia de la cobertura vegetal (estratos arbóreo, arbustivo y herbáceo, y capa de restos vegetales) en su desarrollo. Se persigue así mismo analizar el efecto de la compactación del suelo sobre la persistencia de la masa y contrastar y comparar la eficacia de dos tratamientos edáficos de ayuda a la regeneración: escarificado y decapado+acaballonado. Con este fin se han planteado dos diseños experimentales consistentes en sendas redes de muestreo (Red de Muestreo I o RM I y Red de Muestreo II o RM II) integradas, respectivamente, por 192 y 24 parcelas de 1,5x1,5 m ubicadas bajo distintas condiciones de cobertura vegetal. Sobre una parte de estas parcelas (1/4 en la Red de Muestreo I; 1/2 en la Red de Muestreo II) se han aplicado tratamientos de ayuda a la regeneración (RM I: escarificado; RM II: decapado+acaballonado) y, tras llevar a cabo siembras controladas al inicio del período vegetativo, se han practicado controles periódicos de germinación y supervivencia durante uno (RM II) y tres años consecutivos (RM I). Se han realizado así mismo mediciones complementarias de variables micrometeorológicas, espesura, recubrimiento superficial del suelo y compactación. Los resultados obtenidos a partir de las experiencias realizadas en el monte objeto de estudio permiten concluir que, en relación con el proceso de regeneración natural de la especie en este tipo masa y entorno: 1) la regeneración del pino silvestre durante el primer período vegetativo presenta una tasa de éxito muy baja (1,4% de los sembrados), provocada por una elevada mortalidad durante el primer período estival (>92%) subsiguiente a una germinación de en torno al 17% de las semillas viables que llegan al suelo; 2) la mortalidad sigue siendo elevada hasta el tercer período vegetativo, en que comienza a reducirse significativamente hasta alcanzar el 45%; 3) la cobertura vegetal influye significativamente tanto en el proceso de germinación como en el de supervivencia, aunque ambos procesos presentan una baja correlación linear que pone de manifiesto que los lugares idóneos para la germinación no siempre son los más adecuados para la supervivencia; 4) la escarificación del suelo mejora las tasas iniciales de germinación y supervivencia, pero empeora la tasa de supervivencia posterior (años 2 y 3), por lo que su efecto a medio plazo no resulta significativo; 5) el decapado+acaballonado presenta mejores resultados que el escarificado durante el primer verano, aunque sólo resulta efectivo en condiciones intermedias de espesura de masa; 6) la compactación edáfica no resulta limitante para la productividad ni la persistencia de la masa considerada. ABSTRACT Seedling establishment is critical for later stand progress because it involves high mortality rates and the surviving saplings constitute the starting material for all the subsequent stages. Restrictions for Scots pine germination and seedling survival may vary greatly across its geographical range, as it is widely distributed within north latitudes. Mediterranean region is a marginal sector within this species range and its ecological conditions differ greatly from those of the bulk of the area. Mortality rates in Mediterranean environments seem to be related to summer weather (mainly drought) and high livestock stocking rather than to cold, light or flooding. Most available information on scots pine regeneration process comes from north European experiences and is not transferable to Spanish forests, whereas studies on Mediterranean region are much scarcer. The present work aims at broadening Scots pine regeneration knowledge within Mediterranean region by analyzing its establishment process in the “Cabeza de Hierro” forest: a Scots pine uneven-aged forest at blocklevel scale, exemplary managed for multi-services purpose. Germination and surviving processes are to be characterized and quantified as to vegetation cover both in trees, shrubs, grass and litter strata. Soil compaction effects on forest sustainability are also assessed and the efficacy of some site preparation techniques on regeneration success is tested and compared (scarification vs. scalping+mounding). Two sampling networks comprising respectively 198 (SN I) and 24 plots (SN II) of 1.5x1.5m have been established over a wide range of vegetal cover conditions within the forest. Soil preparation techniques have been applied only to some of the sampling points; namely, 1 out of 4 plots have been scarified within Sampling Network I , while 1 out of 2 plots have been object of scalping & mounding within Sampling Network II. After localized sowing prior to growing season, germination and surviving have been periodically sampled for either one (SN II) or three years (SN I). Supplementary measures for micrometeorological variables, stand density, ground vegetal cover and compaction have also been carried out. Results obtained for the studied forest lead to the following insights regarding Scots pine natural regeneration process within this sort of forest and environment: 1) seedling establishment success rate is quite low (0,15% of sowing seeds), due to high mortality during the first summer (>92%), following a prior 17% rate of germination over viable seeds reaching the soil; 2) mortality rate remains high until the third year after emergence and then decreases to the 50% of surviving; 3) although vegetal cover significantly affects both seedling germination and survival, lineal correlation between those two processes is rather low, which may indicate that places fit for emergence are not necessarily suitable for summer surviving; 4) soil scarification improves both germination and survival during the first growing season, but it is associated to higher mortality rates during the next two years; hence it has no significant medium term effect; 5) scalping & mounding treatment is more effective than scarification concerning establishment improving during the first summer; but its effects are only significant under intermediate stand density levels; 6) soil compaction does not restrict either forest productivity or persistence, despite the area’s long history of high livestock stocking rates and mechanized logging.

Michigan Stadium Construction

[Early site preparation]

Membrane emulsification in preparation of single site catalyst

In the theory part the membrane emulsification was studied. Emulsions are used in many industrial areas. Traditionally emulsions are prepared by using high shear in rotor-stator systems or in high pressure homogenizer systems. In membrane emulsification two immiscible liquids are mixed by pressuring one liquid through the membrane into the other liquid. With this technique energy could be saved, more homogeneous droplets could be formed and the amount of surfactant could be decreased. Ziegler-Natta and single-site catalysts are used in olefin polymerization processes. Nowadays, these catalysts are prepared according to traditional mixing emulsification. More homogeneous catalyst particles that have narrower particle size distribution might be prepared with membrane emulsification. The aim of the experimental part was to examine the possibility to prepare single site polypropylene catalyst using membrane emulsification technique. Different membrane materials and solidification techniques of the emulsion were examined. Also the toluene-PFC phase diagram was successfully measured during this thesis work. This phase diagram was used for process optimization. The polytetrafluoroethylene membranes had the largest contact angles with toluene and also the biggest difference between the contact angles measured with PFC and toluene. Despite of the contact angle measurement results no significant difference was noticed between particles prepared using PTFE membrane or metal sinter. The particle size distributions of catalyst prepared in these tests were quite wide. This would probably be fixed by using a membrane with a more homogeneous pore size distribution. It is also possible that the solidification rate has an effect on the particle sizes and particle morphology. When polymeric membranes are compared PTFE is probably still the best material for the process as it had the best chemical durability.

Immediate loading of single SLA implants: drilling vs. osteotomes for the preparation of the implant site

OBJECTIVES: To evaluate whether or not preparation of the implant site with osteotomes instead of drilling may improve peri-implant bone density and/or osseointegration, and whether or not this further improves the predictability of immediate loading of SLA implants. MATERIAL AND METHODS: The second, third, and fourth premolars were extracted in both sides of the mandible in six dogs, and after at least 3 months four SLA implants were inserted into each side of the jaw. In three animals, the implant sites were prepared by means of osteotomes, while standard stepwise drilling was used in the remaining animals. In each side of the jaw, two non-adjacent implants were restored with single crowns 4 days after installation, while the remaining two implants were left without crowns to serve as non-loaded controls. After 2, 4, or 12 weeks of loading, specimens including the implants and surrounding tissues were obtained and processed for histologic analysis of undecalcified sections. RESULTS: All implants placed with osteotomes were lost (five before delivery of the crowns and the rest during the first week after loading). None of the conventionally inserted implants, however, was lost, and histomorphometrical analysis revealed similar soft- and hard peri-implant tissue characteristics at immediately loaded and non-loaded implants at all observation times. Average bone-to-implant contact was 59-72% at immediately loaded implants vs. 60-63% at non-loaded ones. CONCLUSION: Preparation of the implant site by means of osteotomes had a deleterious effect on osseointegration, while immediate loading of single, free-standing, SLA implants following a conventional surgical protocol did not jeopardize their osseointegration.

Diagnosis and treatment of extraction sockets in preparation for implant placement: report of three cases

This article addresses diagnostic parameters that should be assessed in the treatment of extraction sockets with dental implant placement by presenting three case reports that emphasize the relevance of the amount of remaining bone walls. Diagnosis was based on the analysis of clinical and radiographic parameters (e.g.: bone defect morphology, remaining bone volume, presence of infections on the receptor site). Case 1 presents a 5-wall defect in the maxillary right central incisor region with severe root resorption, which was treated with immediate implant placement. Cases 2 and 3 present, respectively, two- and three-wall bone defects that did not have indication for immediate implants. These cases were first submitted to a guided bone regeneration (GBR) procedure with bone graft biomaterial and membrane barriers, and the implants were installed in a second surgical procedure. The analysis of the preoperative periodontal condition of the adjacent teeth and bone defect morphology is extremely important because these factors determine the choice between immediate implant or GBR treatment followed by implant installation in a subsequent intervention.

Evaluation of grinding methods for pellets preparation aiming at the analysis of plant materials by laser induced breakdown spectrometry

It has been demonstrated that laser induced breakdown spectrometry (LIBS) can be used as an alternative method for the determination of macro (P, K. Ca, Mg) and micronutrients (B, Fe, Cu, Mn, Zn) in pellets of plant materials. However, information is required regarding the sample preparation for plant analysis by LIBS. In this work, methods involving cryogenic grinding and planetary ball milling were evaluated for leaves comminution before pellets preparation. The particle sizes were associated to chemical sample properties such as fiber and cellulose contents, as well as to pellets porosity and density. The pellets were ablated at 30 different sites by applying 25 laser pulses per site (Nd:YAG@1064 nm, 5 ns, 10 Hz, 25J cm(-2)). The plasma emission collected by lenses was directed through an optical fiber towards a high resolution echelle spectrometer equipped with an ICCD. Delay time and integration time gate were fixed at 2.0 and 4.5 mu s, respectively. Experiments carried out with pellets of sugarcane, orange tree and soy leaves showed a significant effect of the plant species for choosing the most appropriate grinding conditions. By using ball milling with agate materials, 20 min grinding for orange tree and soy, and 60 min for sugarcane leaves led to particle size distributions generally lower than 75 mu m. Cryogenic grinding yielded similar particle size distributions after 10 min for orange tree, 20 min for soy and 30 min for sugarcane leaves. There was up to 50% emission signal enhancement on LIBS measurements for most elements by improving particle size distribution and consequently the pellet porosity. (C) 2011 Elsevier B.V. All rights reserved.

Assessing the effects of early silvicultural management on long-term site productivity of fast-growing eucalypt plantations: the Brazilian experience

Eucalyptus is the dominant and most productive planted forest in Brazil, covering around 3.4 million ha for the production of charcoal, pulp, sawtimber, timber plates, wood foils, plywood and for building purposes. At the early establishment of the forest plantations, during the second half of the 1960s, the eucalypt yield was 10 m(3) ha(-1) y(-1). Now, as a result of investments in research and technology, the average productivity is 38 m3 ha(-1) y(-1). The productivity restrictions are related to the following environmental factors, in order of importance: water deficits > nutrient deficiency > soil depth and strength. The clonal forests have been fundamental in sites with larger water and nutrient restrictions, where they out-perform those established from traditional seed-based planting stock. When the environmental limitations are small the productivities of plantations based on clones or seeds appear to be similar. In the long term there are risks to sustainability, because of the low fertility and low reserves of primary minerals in the soils, which are, commonly, loamy and clayey oxisols and ultisols. Usually, a decline of soil quality is caused by management that does not conserve soil and site resources, damages soil physical and chemical characteristics, and insufficient or unbalanced fertiliser management. The problem is more serious when fast-growing genotypes are planted, which have a high nutrient demand and uptake capacity, and therefore high nutrient output through harvesting. The need to mobilise less soil by providing more cover and protection, reduce the nutrient and organic matter losses, preserve crucial physical properties as permeability ( root growth, infiltration and aeration), improve weed control and reduce costs has led to a progressive increase in the use of minimum cultivation practices during the last 20 years, which has been accepted as a good alternative to keep or increase site quality in the long term. In this paper we provide a synthesis and critical appraisal of the research results and practical implications of early silvicultural management on long-term site productivity of fast-growing eucalypt plantations arising from the Brazilian context.

Site works, Hill House, Chapel Hill, Brisbane

Terracing of site in preparation for construction.

Active site heterogeneity in dimethyl sulfoxide reductase from Rhodobacter capsulatus revealed by raman spectroscopy

Raman spectroscopy has been used to investigate the structure of the molybdenum cofactor in DMSO reductase from Rhodobacter capsulatus. Three oxidized forms of the enzyme, designated 'redox cycled', 'as prepared', and DMSORmodD, have been studied using 752 nm laser excitation. In addition, two reduced forms of DMSO reductase, prepared either anaerobically using DMS or using dithionite, have been characterized. The 'redox cycled' form has a single band in the Mo=O stretching region at 865 cm(-1) consistent with other studies. This oxo ligand is found to be exchangeable directly with (DMSO)-O-18 or by redox cycling. Furthermore, deuteration experiments demonstrate that the oxo ligand in the oxidized enzyme has some hydroxo character, which is ascribed to a hydrogen bonding interaction with Trp 116. There is also evidence from the labeling studies for a modified dithiolene sulfur atom, which could be present as a sulfoxide. In addition to the 865 cm(-1) band, an extra band at 818 cm(-1) is observed in the Mo=O stretching region of the 'as prepared' enzyme which is not present in the 'redox cycled' enzyme. Based on the spectra of unlabeled and labeled DMS reduced enzyme, the band at 818 cm(-1) is assigned to the S=O stretch of a coordinated DMSO molecule. The DMSORmodD form, identified by its characteristic Raman spectrum, is also present in the 'as prepared' enzyme preparation but not after redox cycling. The complex mixture of forms identified in the 'as prepared' enzyme reveals a substantial degree of active site heterogeneity in DMSO reductase.