Preservation of encapsulated shoot tips and nodes of the tropical hardwoods Corymbia torelliana × C. citriodora and Khaya senegalensis

Alginate encapsulation is a simple and cost-effective technique to preserve plant germplasm but there are only a few reports available on preservation of encapsulated explants of two highly valuable groups of tropical trees, the eucalypts (Myrtaceae) and mahoganies (Meliaceae). This study investigated alginate encapsulation for preservation of the eucalypt hybrid, Corymbia torelliana × C. citriodora, and the African mahogany, Khaya senegalensis. We assessed shoot regrowth of encapsulated shoot tips and nodes after storage for 0, 3, 6 and 12 months on media varying in sucrose and nutrient content, under storage conditions of 14°C and zero-irradiance. Encapsulated explants of both trees were preserved most effectively on high-nutrient (half-strength Murashige and Skoog) medium containing 1% sucrose, which provided very high frequencies of shoot regrowth (92–100% for Corymbia and 71–98% for Khaya) and excellent shoot development after 12 months’ storage. This technique provides an extremely efficient means for storage and exchange of eucalypts and mahoganies, ideally suited for incorporation into plant breeding and germplasm conservation programs.

Control of Molecular Weight and Polydispersity of Hyperbranched Polymers Using a Reactive B(3) Core: A Single-Step Route to Orthogonally Functionalizable Hyperbranched Polymers

Molecular weight and polydispersity are two structural features of hyperbranched polymers that are difficult to control because of the statistical nature of the step-growth polycondensation of AB(2) type monomers; the statistical growth also causes the polydispersity index to increase with percent conversion (or molecular weight). We demonstrate that using controlled amounts of a specifically designed B(3) core, containing B-type functionality that are more reactive than those present in the AB(2) monomer, both the molecular weight and the polydispersity can be readily controlled; the PDI was shown to improve with increasing mole-fraction of the B(3) core while the polymer molecular weight showed an expected decrease. Incorporation of a ``clickable'' propargyl group in the B(3) core unit permitted the generation of a core-functionalizable hyperbranched polymer. Importantly, this clickable core, in combination with a recently developed AB(2) monomer, wherein the B-type groups are allyl ethers and A is an hydroxyl group, led to the generation of a hyperbranched polymer carrying orthogonally functionalizable core and peripheral groups, via a single-step melt polycondensation. Selective functionalization of the core and periphery using two different types of chromophores was achieved, and the occurrence of fluorescence resonance energy transfer (FRET) between the donor and acceptor chromophores was demonstrated.

Control of Molecular Weight and Polydispersity of Hyperbranched Polymers Using a Reactive B(3) Core: A Single-Step Route to Orthogonally Functionalizable Hyperbranched Polymers

Molecular weight and polydispersity are two structural features of hyperbranched polymers that are difficult to control because of the statistical nature of the step-growth polycondensation of AB(2) type monomers; the statistical growth also causes the polydispersity index to increase with percent conversion (or molecular weight). We demonstrate that using controlled amounts of a specifically designed B(3) core, containing B-type functionality that are more reactive than those present in the AB(2) monomer, both the molecular weight and the polydispersity can be readily controlled; the PDI was shown to improve with increasing mole-fraction of the B(3) core while the polymer molecular weight showed an expected decrease. Incorporation of a ``clickable'' propargyl group in the B(3) core unit permitted the generation of a core-functionalizable hyperbranched polymer. Importantly, this clickable core, in combination with a recently developed AB(2) monomer, wherein the B-type groups are allyl ethers and A is an hydroxyl group, led to the generation of a hyperbranched polymer carrying orthogonally functionalizable core and peripheral groups, via a single-step melt polycondensation. Selective functionalization of the core and periphery using two different types of chromophores was achieved, and the occurrence of fluorescence resonance energy transfer (FRET) between the donor and acceptor chromophores was demonstrated.

Prevalence and magnitude of body weight and image dissatisfaction among women in dietetics majors

[EN] Some authors have suggested that body weight dissatisfaction may be high in students majoring in dietetics. Therefore, this study was conducted to examine the extent of body weight and image dissatisfaction in a sample of women in dietetics major. Additionally, predictors of magnitude of body weight dissatisfaction were analyzed. Participants were 62 volunteers with normalweight whose mean age was 21.87±1.89 years old (nonrandom sample). The assessment instruments included anthropometric measurements, a somatomorphic matrix test and an eating disorders inventory (EDI-2). Data were analyzed using SPSS vs. 15.0. A larger proportion of students chose an ideal body weight lower than actual weight (67.7%) and body image with less body fat and more muscle mass than actual values (56.4%). The magnitude of body weight dissatisfaction was associated with muscle mass and body fat dissatisfaction, and with the subscale of EDI-2 “body dissatisfaction”. So, from a public health standpoint, we consider important to continue working in this line of research with the aim of better understanding the extent of body weight dissatisfaction in women dietitians, and how this dissatisfaction could interfere with their professional practice.

The head-body weight and head-body length relationship of Synodontis schall (Bloch and Schneider 1801) in Asa Lake, Ilorin, Nigeria

A total of 710 specimens of Synodontis schall were analyzed for the head body weight and head body length relationship. The head constituted 40% of the total body weight and 30% of the total body length. The mean head weight for male and female computed was 23.90g and 29.13g respectively. Head weight in both male and female was significantly different (P<0.01) while the head length for the combined sexes showed no significant difference (P>0.05). Fat accumulation in the body tissue was prominent in the females than males usually before the breeding season. The significance of the cephalo-nuchal shield in the bony head of Synodontis species compared with some other catfishes in the lake was also discussed

The relationship of shell dimensions and shell volume to live weight and soft tissue weight in the mangrove clam, Polymesoda erosa (Solander, 1786) from northern Australia

Shell dimensions (length, height, width) and shell volume were evaluated as estimators of growth for Polymesoda erosa in northern Australia. Each parameter was a good estimator when applied to live weight (r2 values of 76-96 percent), but not to soft tissue weight (wet, dry, or ash-free dry weight) (r2 values of 13-32 percent). The b value for shell volume to weight relationship of clams collected during the dry season (June to October) was signifi cantly different than for those collected in the wet season (February to April).

Biological parameters, body length-weight and length-height relationships for various species in Greek waters

Biological/fisheries parameters (L sub(oo) M, F) are presented for four fish species (Gadiculus argenteus; Gaidropsarus mediterraneous; Symphurus ligulatus; Lepidorhombus boscii) as well as body length-weight and length-height relationships for 11 and 12 fish species, respectively, estimated from trawl samples collected using three different cod-ends (stretched mesh size: 14 mm and 20 mm diamond-shaped and 20 mm square-shaped) during 1993-1994, in the western Aegean and North Euboikos Gulf, Greece. The fisheries paramaters, estimated from length-frequency using the ELEFAN approach and software, are discussed in the light of recent information on the selectivity of the presently used trawl cod-end (14 mm diamond shaped)

Studies on fecundity of Puntius sarana (Ham.) in relation to total length, total weight and ovary weight

A total of 43 mature female of Puntius sarana (Ham.) ranging from 204 mm to 320 mm in length and 102 to 482 g in weight were used for present studies. The relationship between fecundity with respect to total length (TL), total weight (TW) and ovary weight (OW) was found to be linear. The coefficient of co-relation 'r' of the above relationships was found to be 0.5947, 0.5761 and 0.9837 respectively. All these values are highly significant (P=0.01) indicating a close relationship between these parameters. However, as indicated by value of 'r' (0.9837), the fecundity is more closely related to ovary weight and hence the ovary weight may be a better index of fecundity than the total length or weight.

Studies on fecundity of Rita pavimentata (Gunther) in relation to total length, total weight and ovary weight

A total of thirty eight ripe ovaries from the specimens of Rita pavimentata, measuring 230 to 355 mm in total length (TL) and 250 to 750 g in total weight (TW), were selected to study the fecundity. The relationship between fecundity 'and total length (TL), total weight (TW) and ovary weight (OW) was found to be linear. The coefficient of co-relation 'r' of the above relationship was found to be 0.92, 0.94 and 0.96 respectively. All these values are highly significant (P=0.01) indicating a close relationship between compared parameters. However, as indicated by value of 'r' (0.96), the fecundity is more closely related to ovary weight and hence the ovary weight may be a better index of fecundity than the total body length or weight.

Length-weight and tail length-total length relationship in Panulirus homarus Linnaeus on the south-west coast of India

Length-weight relationships of Panulirus homarus caught from the Kanniyakumari coast was found to be W=0.000566 L super(2-50). The relationship between tail length and total length was also investigated and compared with that of Panulirus polyphagus. Same relationship did not hold good for the two sexes as in the case of P. polyphagus. For a given tail length, the head length, the total length and the weight appear to be relatively larger for females of small sizes of P. homarus.

Relation between weight and linear measurement of shell in C. madrasensis (Preston)

Relation of weight to height, length and breadth in the Indian backwater oyster Crassostrea madrasensis (Preston) is reported. The relative importance of the variables on weight was found to be height, length and breadth in their order of preference. The multiple regression V = -0.4017 + 0.46743 X + 0.8278 Y + 0.1130 Z can be used to estimate the meat weight (logarithm) for given dimensions of length, height and breadth (all in logarithms). An exponential relation between weight and height is also observed.

Allometric study of skeleton weight, body weight and length relationship of Euryglossa orientalis (Bl. & Schn.) (Family: Soleidae) from Karachi coast

Present study deals with the family Soleidae (common sole) Euryglossa orientalis (Bl. & Schn.) of the order Pleuronectiformis from Karachi coast. Separate equation (regression line) for describing the length weight relationships for male and female combined are justified. Allometric studies were made on skeleton weight relative to the length and the weight of the fish. The regression equation 'a' and 'b' values of standard length/skeleton weight and body weight/skeleton weight are statistically significant.