A sharing-based approach to supporting adaptation in service compositions

Data-related properties of the activities involved in a service composition can be used to facilitate several design-time and run-time adaptation tasks, such as service evolution, distributed enactment, and instance-level adaptation. A number of these properties can be expressed using a notion of sharing. We present an approach for automated inference of data properties based on sharing analysis, which is able to handle service compositions with complex control structures, involving loops and sub-workflows. The properties inferred can include data dependencies, information content, domain-defined attributes, privacy or confidentiality levels, among others. The analysis produces characterizations of the data and the activities in the composition in terms of minimal and maximal sharing, which can then be used to verify compliance of potential adaptation actions, or as supporting information in their generation. This sharing analysis approach can be used both at design time and at run time. In the latter case, the results of analysis can be refined using the composition traces (execution logs) at the point of execution, in order to support run-time adaptation.

Self-adaptive volunteered services composition through stimulus-and time-awareness

Volunteered Service Composition (VSC) refers to the process of composing volunteered services and resources. These services are typically published to a pool of voluntary resources. Selection and composition decisions tend to encounter numerous uncertainties: service consumers and applications have little control of these services and tend to be uncertain about their level of support for the desired functionalities and non-functionalities. In this paper, we contribute to a self-awareness framework that implements two levels of awareness, Stimulus-awareness and Time-awareness. The former responds to basic changes in the environment while the latter takes into consideration the historical performance of the services. We have used volunteer service computing as an example to demonstrate the benefits that self-awareness can introduce to self-adaptation. We have compared the Stimulus-and Time-awareness approaches with a recent Ranking approach from the literature. The results show that the Time-awareness level has the advantage of satisfying higher number of requests with lower time cost.

Orchestration of heterogeneous middleware services and its application to a comand and control platform

MSC Dissertation in Computer Engineering

On the analysis of compensation correctness

One fundamental idea of service-oriented computing is that applications should be developed by composing already available services. Due to the long running nature of service interactions, a main challenge in service composition is ensuring correctness of transaction recovery. In this paper, we use a process calculus suitable for modelling long running transactions with a recovery mechanism based on compensations. Within this setting, we discuss and formally state correctness criteria for compensable processes compositions, assuming that each process is correct with respect to transaction recovery. Under our theory, we formally interpret self-healing compositions, that can detect and recover from faults, as correct compositions of compensable processes. Moreover, we develop an automated verification approach and we apply it to an illustrative case study.

Multi-agent system for personalization of location-based services

The current ubiquitous network access and increase in network bandwidth are driving the sales of mobile location-aware user devices and, consequently, the development of context-aware applications, namely location-based services. The goal of this project is to provide consumers of location-based services with a richer end-user experience by means of service composition, personalization, device adaptation and continuity of service. Our approach relies on a multi-agent system composed of proxy agents that act as mediators and providers of personalization meta-services, device adaptation and continuity of service for consumers of pre-existing location-based services. These proxy agents, which have Web services interfaces to ensure a high level of interoperability, perform service composition and take in consideration the preferences of the users, the limitations of the user devices, making the usage of different types of devices seamless for the end-user. To validate and evaluate the performance of this approach, use cases were defined, tests were conducted and results gathered which demonstrated that the initial goals were successfully fulfilled.

Product extension services deployment platform

Due to the progresses made in the branch of embedded technologies, manufacturers are becoming able to pack their shop floor level manufacturing resources with even more complex functionalities. This technological progression is radically changing the way production systems are designed and deployed, as well as, monitored and controlled. The dissemination of smart devices inside production processes confers new visibility on the production system while enabling for a more efficient and effective management of the operations. By turning the current manufacturing resources functionalities into services based on a Service Oriented Architecture (SOA), in order to expose them as a service to the user, the binomial manufacturing resource/service will push the entire manufacturing enterprise visibility to another level while enabling the global optimization of the operations and processes of a production system while, at the same time, supporting its accommodation to the operational spike easily and with reduced impact on production. The present work implements a Cloud Manufacturing infrastructure for achieving the resource/service value-added i.e. to facilitate the creation of services that are the composition of currently available atomic services. In this context, manufacturing resource virtualization (i.e. formalization of resources capabilities into services accessible inside and outside the enterprise) and semantic representation/description are the pillars for achieving resource service composition. In conclusion, the present work aims to act on the manufacturing resource layer where physical resources and shop floor capabilities are going to be provided to the user as a SaaS (Software as a Service) and/or IaaS (Infrastructure as a Service).

A Negotiation Style Recommender Based on Computational Ecology in Open Negotiation Environments

The system described herein represents the first example of a recommender system in digital ecosystems where agents negotiate services on behalf of small companies. The small companies compete not only with price or quality, but with a wider service-by-service composition by subcontracting with other companies. The final result of these offerings depends on negotiations at the scale of millions of small companies. This scale requires new platforms for supporting digital business ecosystems, as well as related services like open-id, trust management, monitors and recommenders. This is done in the Open Negotiation Environment (ONE), which is an open-source platform that allows agents, on behalf of small companies, to negotiate and use the ecosystem services, and enables the development of new agent technologies. The methods and tools of cyber engineering are necessary to build up Open Negotiation Environments that are stable, a basic condition for predictable business and reliable business environments. Aiming to build stable digital business ecosystems by means of improved collective intelligence, we introduce a model of negotiation style dynamics from the point of view of computational ecology. This model inspires an ecosystem monitor as well as a novel negotiation style recommender. The ecosystem monitor provides hints to the negotiation style recommender to achieve greater stability of an open negotiation environment in a digital business ecosystem. The greater stability provides the small companies with higher predictability, and therefore better business results. The negotiation style recommender is implemented with a simulated annealing algorithm at a constant temperature, and its impact is shown by applying it to a real case of an open negotiation environment populated by Italian companies

Investigation of Two Bridge Alternatives for Low Volume Roads - Phase II Volume 1 of 2 Concept 1: Steel Beam Precast Units, TR-410, 2000

This project continues the research which addresses the numerous bridge problems on the Iowa secondary road system. It is a continuation (Phase 2) of Project HR-382, in which two replacement alternatives (Concept 1: Steel Beam Precast Units and Concept 2: Modification of the Benton County Beam-in-Slab Bridge) were investigated. In previous research for concept 1, a precast unit bridge was developed through laboratory testing. The steel-beam precast unit bridge requires the fabrication of precast double-tee (PCDT) units, each consisting of two steel beams connected by a reinforced concrete deck. The weight of each PCDT unit is minimized by limiting the deck thickness to 4 in., which permits the units to be constructed off-site and then transported to the bridge site. The number of units required is a function of the width of bridge desired. Once the PCDT units are connected, a cast-in-place reinforced concrete deck is cast over the PCDT units and the bridge railing attached. Since the steel beam PCDT unit bridge design is intended primarily for use on low-volume roads, used steel beams can be utilized for a significant cost savings. In previous research for concept 2, an alternate shear connector (ASC) was developed and subjected to static loading. In this investigation, the ASC was subjected to cyclic loading in both pushout specimens and composite beam tests. Based on these tests, the fatigue strength of the ASC was determined to be significantly greater than that required in typical low volume road single span bridges. Based upon the construction and service load testing, the steel-beam precast unit bridge was successfully shown to be a viable low volume road bridge alternative. The construction process utilized standard methods resulting in a simple system that can be completed with a limited staff. Results from the service load tests indicated adequate strength for all legal loads. An inspection of the bridge one year after its construction revealed no change in the bridge's performance. Each of the systems previously described are relatively easy to construct. Use of the ASC rather than the welded studs significantly simplified the work, equipment, and materials required to develop composite action between the steel beams and the concrete deck.

Investigation of Two Bridge Alternatives for Low Volume Roads - Phase II Volume 2 of 2, Concept 2: Beam in Slab Bridge, TR-410, 2000

This project continues the research which addresses the numerous bridge problems on the Iowa secondary road system. It is a continuation (Phase 2) of Project HR-382, in which two replacement alternatives (Concept 1: Steel Beam Precast Units and Concept 2: Modification of the Benton County Beam-in-Slab Bridge) were investigated. In previous research for concept 1, a precast unit bridge was developed through laboratory testing. The steel-beam precast unit bridge requires the fabrication of precast double-tee (PCDT) units, each consisting of two steel beams connected by a reinforced concrete deck. The weight of each PCDT unit is minimized by limiting the deck thickness to 4 in., which permits the units to be constructed off-site and then transported to the bridge site. The number of units required is a function of the width of bridge desired. Once the PCDT units are connected, a cast-in-place reinforced concrete deck is cast over the PCDT units and the bridge railing attached. Since the steel beam PCDT unit bridge design is intended primarily for use on low-volume roads, used steel beams can be utilized for a significant cost savings. In previous research for concept 2, an alternate shear connector (ASC) was developed and subjected to static loading. In this investigation, the ASC was subjected to cyclic loading in both pushout specimens and composite beam tests. Based on these tests, the fatigue strength of the ASC was determined to be significantly greater than that required in typical low volume road single span bridges. Based upon the construction and service load testing, the steel-beam precast unit bridge was successfully shown to be a viable low volume road bridge alternative. The construction process utilized standard methods resulting in a simple system that can be completed with a limited staff. Results from the service load tests indicated adequate strength for all legal loads. An inspection of the bridge one year after its construction revealed no change in the bridge's performance. Each of the systems previously described are relatively easy to construct. Use of the ASC rather than the welded studs significantly simplified the work, equipment, and materials required to develop composite action between the steel beams and the concrete deck.

Verkkopalveluiden jatkuvan ylläpidon kehittäminen: Case Aucor Oy ja WordPress

Verkkopalveluiden ylläpitovaiheessa halutaan varmistua, etteivät palveluun tehdyt muutokset aiheuta verkkopalvelussa virhetilanteita ja palvelu toimii moitteetta. Muutoksen hyväksyntätestaus voidaan tehdä regressiotestauksena vertaamalla palvelun tilaa ennen ja jälkeen muutoksen. Sisältöpainotteisessa verkkopalvelussa testaaminen keskittyy loppukäyttäjälle esitetyn sivun semanttiseen sekä visuaaliseen oikeellisuuteen sekä erilaisiin toiminnallisiin testeihin. Työssä tarkastellaan etenkin suositulla WordPress-julkaisujärjestelmällä toteutettujen verkkopalveluiden ylläpitoa. Keskeisenä osana julkaisujärjestelmillä toteutettujen verkkopalveluiden ylläpitoa on julkaisujärjestelmän ja sitä täydentävien lisäosien päivittämistä ajantasaisiin versioihin. Nämä päivitykset paitsi tuovat uusia ominaisuuksia verkkopalvelun kehittäjille, myös paikkaavat järjestelmän tietoturvahaavoittuvuuksia sekä korjaavat aiemmissa versioissa esiintyneitä virheitä. Tässä työssä kehitettiin kohdeyrityksen aiempia verkkopalveluiden ylläpitoprosesseja niissä tunnistettujen kehityskohteiden perusteella. Uudistettu kokonaisuus jakautuu kahteen kokonaisuuteen: päivitystarpeen seurantaan sekä päivitysten tekemiseen. Päivitystarpeen seurantaa varten kehitettiin uusi työkalu helpottamaan kokonaiskuvan hahmottamista. Päivitysten tekemisen osalta työssä keskityttiin automatisoidun regressiotestauksen kehittämiseen, missä tärkeimpänä testauskeinona käytetään verkkopalvelusta tallennettujen kuvankaappausten vertailuun perustuvaa visuaalista testausta. Uusien ylläpitoprosesseille määriteltiin myös seurannan kohteet uudistuksen onnistumisen ja jatkokehityksen arviointia varten.

Automatische Dienstvermittlung in dienstorientierten Architekturen

Die Technologie dienstorientierter Architekturen (Service-oriented Architectures, kurz SOA) weckt große Visionen auf Seiten der Industrie wie auch der Forschung. Sie hat sich als derzeit ideale Lösung für Umgebungen, in denen sich die Anforderungen an die IT-Bedürfnisse rapide ändern, erwiesen. Heutige IT-Systeme müssen Managementaufgaben wie Softwareinstallation, -anpassung oder -austausch erlauben, ohne dabei den laufenden Betrieb wesentlich zu stören. Die dafür nötige Flexibilität bieten dienstorientierte Architekturen, in denen Softwarekomponenten in Form von Diensten zur Verfügung stehen. Ein Dienst bietet über seine Schnittstelle lokalen wie entfernten Applikationen einen Zugang zu seiner Funktionalität. Wir betrachten im Folgenden nur solche dienstorientierte Architekturen, in denen Dienste zur Laufzeit dynamisch entdeckt, gebunden, komponiert, verhandelt und adaptiert werden können. Eine Applikation kann mit unterschiedlichen Diensten arbeiten, wenn beispielsweise Dienste ausfallen oder ein neuer Dienst die Anforderungen der Applikation besser erfüllt. Eine unserer Grundvoraussetzungen lautet somit, dass sowohl das Dienstangebot als auch die Nachfrageseite variabel sind. Dienstorientierte Architekturen haben besonderes Gewicht in der Implementierung von Geschäftsprozessen. Im Rahmen des Paradigmas Enterprise Integration Architecture werden einzelne Arbeitsschritte als Dienste implementiert und ein Geschäftsprozess als Workflow von Diensten ausgeführt. Eine solche Dienstkomposition wird auch Orchestration genannt. Insbesondere für die so genannte B2B-Integration (Business-to-Business) sind Dienste das probate Mittel, um die Kommunikation über die Unternehmensgrenzen hinaus zu unterstützen. Dienste werden hier in der Regel als Web Services realisiert, welche vermöge BPEL4WS orchestriert werden. Der XML-basierte Nachrichtenverkehr und das http-Protokoll sorgen für eine Verträglichkeit zwischen heterogenen Systemen und eine Transparenz des Nachrichtenverkehrs. Anbieter dieser Dienste versprechen sich einen hohen Nutzen durch ihre öffentlichen Dienste. Zum einen hofft man auf eine vermehrte Einbindung ihrer Dienste in Softwareprozesse. Zum anderen setzt man auf das Entwickeln neuer Software auf Basis ihrer Dienste. In der Zukunft werden hunderte solcher Dienste verfügbar sein und es wird schwer für den Entwickler passende Dienstangebote zu finden. Das Projekt ADDO hat in diesem Umfeld wichtige Ergebnisse erzielt. Im Laufe des Projektes wurde erreicht, dass der Einsatz semantischer Spezifikationen es ermöglicht, Dienste sowohl im Hinblick auf ihre funktionalen als auch ihre nicht-funktionalen Eigenschaften, insbesondere die Dienstgüte, automatisch zu sichten und an Dienstaggregate zu binden [15]. Dazu wurden Ontologie-Schemata [10, 16], Abgleichalgorithmen [16, 9] und Werkzeuge entwickelt und als Framework implementiert [16]. Der in diesem Rahmen entwickelte Abgleichalgorithmus für Dienstgüte beherrscht die automatische Aushandlung von Verträgen für die Dienstnutzung, um etwa kostenpflichtige Dienste zur Dienstnutzung einzubinden. ADDO liefert einen Ansatz, Schablonen für Dienstaggregate in BPEL4WS zu erstellen, die zur Laufzeit automatisch verwaltet werden. Das Vorgehen konnte seine Effektivität beim internationalen Wettbewerb Web Service Challenge 2006 in San Francisco unter Beweis stellen: Der für ADDO entwickelte Algorithmus zur semantischen Dienstkomposition erreichte den ersten Platz. Der Algorithmus erlaubt es, unter einer sehr großenMenge angebotener Dienste eine geeignete Auswahl zu treffen, diese Dienste zu Dienstaggregaten zusammenzufassen und damit die Funktionalität eines vorgegebenen gesuchten Dienstes zu leisten. Weitere Ergebnisse des Projektes ADDO wurden auf internationalen Workshops und Konferenzen veröffentlicht. [12, 11]

A Negotiation Style Recommender Based on Computational Ecology in Open Negotiation Environments

The system described herein represents the first example of a recommender system in digital ecosystems where agents negotiate services on behalf of small companies. The small companies compete not only with price or quality, but with a wider service-by-service composition by subcontracting with other companies. The final result of these offerings depends on negotiations at the scale of millions of small companies. This scale requires new platforms for supporting digital business ecosystems, as well as related services like open-id, trust management, monitors and recommenders. This is done in the Open Negotiation Environment (ONE), which is an open-source platform that allows agents, on behalf of small companies, to negotiate and use the ecosystem services, and enables the development of new agent technologies. The methods and tools of cyber engineering are necessary to build up Open Negotiation Environments that are stable, a basic condition for predictable business and reliable business environments. Aiming to build stable digital business ecosystems by means of improved collective intelligence, we introduce a model of negotiation style dynamics from the point of view of computational ecology. This model inspires an ecosystem monitor as well as a novel negotiation style recommender. The ecosystem monitor provides hints to the negotiation style recommender to achieve greater stability of an open negotiation environment in a digital business ecosystem. The greater stability provides the small companies with higher predictability, and therefore better business results. The negotiation style recommender is implemented with a simulated annealing algorithm at a constant temperature, and its impact is shown by applying it to a real case of an open negotiation environment populated by Italian companies

Um ambiente para especificação e execução AD-HOC de processos de negócio baseados em serviços Web

Recently the focus given to Web Services and Semantic Web technologies has provided the development of several research projects in different ways to addressing the Web services composition issue. Meanwhile, the challenge of creating an environment that provides the specification of an abstract business process and that it is automatically implemented by a composite service in a dynamic way is considered a currently open problem. WSDL and BPEL provided by industry support only manual service composition because they lack needed semantics so that Web services are discovered, selected and combined by software agents. Services ontology provided by Semantic Web enriches the syntactic descriptions of Web services to facilitate the automation of tasks, such as discovery and composition. This work presents an environment for specifying and ad-hoc executing Web services-based business processes, named WebFlowAH. The WebFlowAH employs common domain ontology to describe both Web services and business processes. It allows processes specification in terms of users goals or desires that are expressed based on the concepts of such common domain ontology. This approach allows processes to be specified in an abstract high level way, unburdening the user from the underline details needed to effectively run the process workflow

AutoWebS: um Ambiente para Modelagem e Geração Automática de ServiçosWeb Semânticos

Typically Web services contain only syntactic information that describes their interfaces. Due to the lack of semantic descriptions of the Web services, service composition becomes a difficult task. To solve this problem, Web services can exploit the use of ontologies for the semantic definition of service s interface, thus facilitating the automation of discovering, publication, mediation, invocation, and composition of services. However, ontology languages, such as OWL-S, have constructs that are not easy to understand, even for Web developers, and the existing tools that support their use contains many details that make them difficult to manipulate. This paper presents a MDD tool called AutoWebS (Automatic Generation of Semantic Web Services) to develop OWL-S semantic Web services. AutoWebS uses an approach based on UML profiles and model transformations for automatic generation of Web services and their semantic description. AutoWebS offers an environment that provides many features required to model, implement, compile, and deploy semantic Web services

Cloud Integrator: uma plataforma para composição de serviços em ambientes de computação em nuvem

With the advance of the Cloud Computing paradigm, a single service offered by a cloud platform may not be enough to meet all the application requirements. To fulfill such requirements, it may be necessary, instead of a single service, a composition of services that aggregates services provided by different cloud platforms. In order to generate aggregated value for the user, this composition of services provided by several Cloud Computing platforms requires a solution in terms of platforms integration, which encompasses the manipulation of a wide number of noninteroperable APIs and protocols from different platform vendors. In this scenario, this work presents Cloud Integrator, a middleware platform for composing services provided by different Cloud Computing platforms. Besides providing an environment that facilitates the development and execution of applications that use such services, Cloud Integrator works as a mediator by providing mechanisms for building applications through composition and selection of semantic Web services that take into account metadata about the services, such as QoS (Quality of Service), prices, etc. Moreover, the proposed middleware platform provides an adaptation mechanism that can be triggered in case of failure or quality degradation of one or more services used by the running application in order to ensure its quality and availability. In this work, through a case study that consists of an application that use services provided by different cloud platforms, Cloud Integrator is evaluated in terms of the efficiency of the performed service composition, selection and adaptation processes, as well as the potential of using this middleware in heterogeneous computational clouds scenarios