La marge continentale sud-portugaise: évolution structurale et sédimentaire

The structural and sedimentary evolution of the portuguese continental margin South of Setúbal Canyon is outlined from the study of many seismic reflection profiles and rocks samples. During Triassic and Early Liassic time, a distension affects the Algarve margin that belongs to the Mesogean area. Off Baixo Alentejo rifting phases at Late Jurassic and Early Cretaceous times induced opening or widening of the adjacent part of the Atlantic ocean. Alpine orogeny is inferred to explain the Eocene and Miocene deformation of the margin specially along the main NE-SW fractures.

Litostratigrafia do Terciario da região Miranda do Corvo-Viseu (Bacia do Mondego, Portugal)

The lithostratigraphic units (2 groups, 5 formations and 4 members) of the Tertiary of the Miranda do Corvo-Viseu region (Central Portugal) are here described. For each unit the characterization and description (boundaries, diagnostic properties and atributes) were included. The stratigraphic, lithological, sequential and tectonic data allow correlations with other units of the same Tertiary basin located more to west and support the chronostratigraphic attribution. Sedimentologic characteristics of the deposits lead to the interpretation of the influence of tectonism, climate and eustasy during the sedimentary evolution of this Basin.

Contribuição para a análise tectono-sedimentar do Fosso de Aljezur (SW de Portugal)

The Aljezur "graben" is a crucial piece in understanding the Caenozoic evolution of the SW atlantic portuguese edge. Detailed study of the sedimentary filling and bordering accidents allows the identification of several evolution steps since the Miocene. The graben is bordered by accidents that dislocate geomorphologic surfaces (Littoral Platform to the W, Interior Platform to the E), and also Neogene sedimentary units. The sedimentary filling is composed by conglomerates and sands grading into clays and bioclastic limestones (Burdigalian to Serravalian), upon which lie unconformably fine reddish sands, sometimes with abundant micas. Genetic and geometric relationships between these sands, those in higher surfaces outside the "graben" and the main bordering faults, are discussed. As a conclusion, the reconstruction of the tectono-sedimentary evolution is attempted, integrating it in a "pull-apart" context associated with the Messejana-fault system and it's reactivation by the differently orientated alpine compressions.

The early Miocene rotation of the Corso-Sardinian block. New paleomagnetic constraints for the end of the motion

The paleomagnetic investigations carried out in the 70's on Oligo-Miocene volcanics of Sardinia have demonstrated that the island was turned by 35-30 degrees clockwise from 33 Ma up to 3-1-20.5 Ma and rotated counterclockwise in a few million years [De Jong et al., 1969, 1973; Bobier et Coulon, 1970; Coulon et al., 1974; Manzoni, 1974, 1975; Bellon rr nl.. 1977: Edel et Lortscher, 1977; Edel, 1979, 1980]. Since then, the end of the rotation fixed at 19 Ma by Montigny er al. [1981] was the subject of discussions and several studies associating paleomagnetism and radiometric dating were undertaken [Assorgia er al., 1994: Vigliotti et Langenheim, 1995: Deino et al., 1997; Gattacceca rt Deino, 1999]. This is a contribution to this debate that is hampered by thr important secular variation recorded in the volcanics. The only way to get our of this problem is to sample series of successive flows as completely as possible, and to reduce the effect of secular variation by the calculation of means. Sampling was performed north of Bonorva in 5 pyroclastic flows that belong to the upper ignimbritic series SI2 according to Coulon rr nl. [1974] or LBLS according to Assorgia et al. [1997] (fig. I). Ar-40/Ar-39 dating of biotites from the debris flow (MDF) has yielded an age or 18.35 +/- 0.03 Ma [Dubois, 2000]. Five of the investigated sites are located beneath the debris flow ITV, TVB, TVD, SPM85, SPM86), one site was cured in the matrix of the debris flow (MDF) and one in 4 metric blocks included in the flow (DFC). Another site was sampled in the upper ash flow (PDM) that marks the end of the pyroclastic activity, just before the marine transgression. According to micropaleontological and radiometric dating this transgression has occurred between 18.35 and 17.6 Ma [Dubois, 2000]. After removal of a soft viscous component, the thermal demagnetization generally shows a univectorial behaviour of the remanent magnetization (fig. 2a). The maximum unblocking temperatures of 580-620 degrees (tab. I) and a rapid saturation below 100 mT (fig. 3) indicate that the carrier of the characteristic magnetization is magnetite. The exception comes: from the upper site PDM in which were found two characteristic components, one with a normal polarity and low unblocking temperatures up to 350 degreesC and one with a reversed polarity and maximum unblocking temperatures at 580-600 degreesC of magnetite. After calculation of a mean direction for each flow, the mean << Al >> direction 4 degrees /57 degrees (alpha (95) = 13 degrees) computed with the mean directions for the 5 flows may be considered as weakly affected by secular variation. But the results require a more careful examination. The declinations are N to NNW beneath the debris flow. NNW in the debris flow. and NNE (or SSW) above the debris flow, The elongated distribution of the directions obtained at sites TVB and TVD. scattered from the mean direction of TV to the mean direction of MDF is interpreted as due to partial overprinting during the debris How volcanic episode, The low temperature component PDMa is likely related to the alteration seen on thin sections and is also viewed as an overprint. As NNE/SSW directions occur as well below (mean direction << B >> : 5 degrees /58 degrees) as above the debris flow (PDMb : 200 degrees/-58 degrees). the NNW directions (<< C >> : 337 degrees /64 degrees) associated with the debris flow volcanism may be interpreted as resulting from a magnetic field excursion. According to the polarity scale of Cande and Kent [1992, 1995] and the radiometric age of MDF, the directions with normal polarity (TV, TVB, TVD, SPM85. SPM86a. MDF. DFC) may represent the period 5En. while the directions with reversed polarity PDMb and SPM86b were likely acquired during the period 5Dr. Using the mean << Al >> direction, the mean << B >>, or the PDM direction (tab. I). the deviation in declination with the direction of stable Europe 6.4 degrees /58.7 degrees (alpha (95) = 8 degrees) for a selection of 4 middle Tertiary poles by Besse et Courtillot [1991] or 7 degrees /56 degrees (alpha (95) = 3 degrees) for 19 poles listed by Edel [1980] can be considered as negligible. Using the results from the uppermost ignimbritic layer of Anglona also emplaced around 18.3 Ma [Odin rt al.. 1994]. the mean direction << E >> (3 degrees /51.5 degrees) leads to the same conclusion. On the contrary, when taking into account all dated results available for the period 5En (mean direction << D >> 353 degrees /56 degrees for 45 sites) (tab. II). the deviation 13 degrees is much more significant. As the rotation of Sardinia started around 21-20.5 Ma. the assumption of a constant velocity of rotation and the deviations of the Sardinia directions with respect to the stable Europe direction locate the end of the motion between 18.3 and 17.2 or 16.7 Ma (fig. 4). During the interval 18.35-17.5 Ma, the marine transgression took place. At the same period a NE-SW shortening interpreted as resulting from the collision of Sardinia with Apulia affected different parts of the island [Letouzey et al., 1982]. Consequently, the new paleomagnetic results and the tectono-sedimentary evolution are in favour of an end of the rotation at 17.5-18 Ma.

Genesis of textural contrasts in subsurface soil horizons in the Northern Pantanal-Brazil

The Pantanal region can be characterized as a quaternary floodplain with predominant sedimentation in the form of alluvial fans. In the geomorphologic and sedimentary evolution, the avulsion process is inherent to this depositional system and its dynamics, together with surface water floods, influence soil sedimentation on this plain. The knowledge and differentiation of these two events can contribute to a better understanding of the variability of soil properties and distribution under the influence of these sedimentation processes. Therefore, this study investigated the genesis of soils in the Northern Pantanal with textural contrasts in deeper horizons and their relationship with the depositional system dynamics. We analyzed four soil profiles in the region of Barão de Melgaço, Mato Grosso State, Brazil (RPPN SESC Pantanal). Two profiles were sampled near the Rio Cuiabá (AP1 and AP4) and two near the Rio São Lourenço (AP10 and AP11). In AP11, the horizons contrast in particle size between the profile basis and the surface. In AP1, AP4 and AP10, the horizons overlaying the sand layer have similar particle size properties, mainly in terms of sand distribution. In the first case, floods (surface water) seem to have originated the horizons and layers with contrasting texture. In the second case, avulsion is the most pronounced process. Therefore, the two modes can form soils with contrasting texture that are discriminable by soil morphology, based on the distinct features associated to the specific sedimentation processes.

Aportació al coneixement de l'evolució geològica recent de la plana del Ter (Baix Empordà)

The infilling of the river Ter Plain was produced by alluvial systems under the control of sea-level changes during the Quaternary. This paper describes the sedimentary evolution of the plain, and attemps to present a chronology of the recent geological events based on eustatic curves

Evidence for coseismic events of recurrent prehistoric deformation along the Alhama de Murcia fault, southeastern Spain

The Alhama de Murcia fault is a 85 km long oblique-slip fault, and is related to historical and instrumental seismic activity. A paleoseismic analysis of the Lorca-Totana sector of the fault containing MSK I=VIII historical earthquakes was made in order to identify and quantify its seismic potential. We present 1) the results of the neotectonic, structural and geomorphological analyses and, 2) the results of trenching. In the study area, the Alhama de Murcia fault forms a depressed corridor between two strands, the northwestern fault with morphological and structural features of a reverse component of slip, bounding the La Tercia range to the South, and the southeastern fault strand with evidence of sinistral oblique strike-slip movement. The offset along this latter fault trapped the sediments in transit from the La Tercia range towards the Guadalentín depression. The most recent of these sediments are arranged in three generations of alluvial fans and terraces. The first two trenches were dug in the most recent sediments across the southeastern fault strand. The results indicate a coseismic reverse fault deformation that involved the sedimentary sequence up to the intermediate alluvial fan and the Holocene terrace deposits. The sedimentary evolution observed in the trenches suggests an event of temporary damming of the Colmenar creek drainage to the South due to uplifting of the hanging wall during coseismic activation of the fault. Trench, structural and sedimentological features provide evidence of at least three coseismic events, which occurred after 125,000 yr. The minimum vertical slip rate along the fault is 0.06 mm/yr and the average recurrence period should not exceed 40,000 yr in accordance with the results obtained by fan topographic profiling. Further absolute dating is ongoing to constrain these estimates.

Análise tectono-estratigráfica das sequências permotriassica e jurocretácea da bacia Chacoparanense Uruguaia (Cuenca Norte)

Pós-graduação em Geologia Regional - IGCE

Evolução tectono-sedimentar mesozóico-cenozóica da região de Franca

Pós-graduação em Geologia Regional - IGCE

Geologia de subsuperfície e hidroestratigrafia do grupo Bauru no estado de São Paulo

Pós-graduação em Geologia Regional - IGCE

Depósitos pleistocenos da formação Itaubal: paleoambiente e implicações na evolução da planície costeira do Amapá

A costa norte da América do Sul durante o Pleistoceno tardio esteve sujeita a oscilações do nível do mar, relacionadas a variações climáticas e influência da dinâmica de sedimentos carreados pelo Rio Amazonas, que moldaram a paisagem desta região. Terraços Pleistocenos da Formação Itaubal, anteriormente considerados como pertencentes à Formação Barreiras (Mioceno), constituem parte da Planície Costeira do Amapá e recobrem rochas do Escudo das Guianas. A integração das análises de fácies, estratigráfica e datações por Luminescência Opticamente Estimulada / regeneração de alíquota única e múltipla (LOE / SAR-MAR) entre 120.600 (± 12.000) e 23.150 (±6.800) anos AP permitiu o posicionamento da Formação Itaubal no Pleistoceno Superior. Estes depósitos siliciclásticos, de espessura máxima de 10 m, cor amarronzada a avermelhada com camadas de geometria tabular foram divididos em duas unidades separadas por inconformidade. A Unidade Inferior compreende as associações de fácies, de planície de inframaré (AF1) e de canal fluvial meandrante influenciado por maré (AF2), enquanto que a Unidade Superior, com maior concentração de argila que a Unidade Inferior, consiste em depósitos de planície de maré (AF3) e de canal fluvial entrelaçado (AF4). As duas unidades têm caracteristicas progradacionais dentro de trato de sistema de mar alto e regressivo, e foram depositadas diretamente sobre rochas do embasamento intensamente intemperizadas durante o Mioceno-Pleistoceno. Os depósitos da Formação Itaubal foram expostos durante o Último Máximo Glacial (22.000 - 18.000 anos AP) e posteriormente sobrepostos por depósitos finos do Rio Amazonas, que configuram a atual linha de costa da Costa norte da América do Sul. Pela primeira vez a Formação Itaubal define os eventos sedimentares do Pleistoceno na evolução da Planície Costeira do Amapá. A correlação de seus depósitos com os de Suriname e nordeste do Pará amplia a discussão sobre a configuração da linha de costa do norte da América do Sul desde o Pleistoceno.

Paleoambiente e diagênese da formação Itaituba, carbonífero da bacia do Amazonas, com base em testemunho de sondagem, região de Uruará, Pará

A Formação Itaituba de idade carbonífera representa a sedimentação carbonática de depósitos transgressivos do Grupo Tapajós da Bacia do Amazonas. A sucessão Itaituba é interpretada como depósitos de planície de maré mista, constituídos de calcários fossilíferos, dolomitos finos, arenitos finos a grossos e subordinadamente siltitos avermelhados, evaporitos e folhelhos negros. A análise de fácies e microfácies do testemunho de sondagem da região de Uruará, Estado do Pará, permitiu individualizar dezenove fácies agrupadas em cinco associações: planície de maré (AF1), canal de maré (AF2), laguna (AF3), barra bioclástica (AF4) e plataforma externa (AF5). AF1 é composta por arenito fino com rip-up clasts e gretas de contração, marga com grãos de quartzo e feldspato, dolomudstone laminado com grãos terrígenos e dolomito fino silicificado, com intercalação de argilito com grãos de quartzo disseminados, dolomitizado e localmente com sílica microcristalina. AF2 consiste em arenito médio a grosso com estratificação cruzada acanalada, recoberta por filmes pelíticos nos foresets, arenito muito fino a fino com acamamento wavy, siltito laminado com falhas sinsedimentares e acamamento convoluto. AF3 é constituída de siltito vermelho maciço, mudstone com fósseis, floatstone com braquiópodes e pirita disseminada e mudstone maciço com frequentes grãos de quartzo. AF4 e AF5 exibem abundantes bioclastos representados por espinhos e fragmentos de equinodermas, conchas, fragmentos e espinhos de braquiópodes, ostracodes, foraminíferos, algas vermelhas e conchas de bivalves. AF4 é formada por grainstone oolítico fossilífero e grainstone com terrígenos principalmente grãos de quartzo monocristalino e AF5 se compõe de wackestone fossilífero, wackestone com terrígenos e mudstone maciço com grãos de quartzo monocristalino. Subarcósios (AF1), arcósios (AF2) e arcósios líticos (AF2) são os tipos de arenitos da sucessão Itaituba e apresentam como principais constituintes grãos de quartzo monocristalino e policristalino, K-feldspato, plagioclásio, pirita, muscovita detrítica, fragmento de rocha pelítica, metamórfica e chert e raros bioclastos. O cimento é de calcita espática não ferrosa, óxido/hidróxido de ferro e sobrecrescimento de sílica. A porosidade é intergranular, móldica e às vezes alongada, sem permeabilidade perfazendo até 11% da rocha. Os processos diagenéticos dos arenitos são compactação física, sobrecrescimento de sílica, cimentação de calcita, formação de matriz diagenética, compactação química, substituição de grãos, autigênese de pirita, formação de óxido/hidróxido de ferro e alteração do plagioclásio. Os processos diagenéticos dos carbonatos são: micritização, neomorfismo, colomitização, fraturamento, compactação química, cimentação de calcita, dissolução secundária e autigênese de minerais. A sucessão da Formação Itaituba representa um sistema de laguna/planície de maré ligada a uma plataforma marinha carbonática. Planícies de maré desenvolveram-se nas margens das lagunas e eram periodicamente supridas por influxos de terrígenos finos (silte) que inibiam a precipitação carbonática. Barras bioclásticas eram cortadas por canais de maré (inlet) que conectavam a laguna com a plataforma rasa rica em organismos bentônicos.

Evolução tectônica do Trend Badejo-Linguado-Pampo, bacia de Campos (RJ)

The regional geological work for the oil industry, in order to find potential areas for hydrocarbon exploration and understand the geological parameters responsible for the formation of the deposit are known importance. This work fits into that scenario, with regional research with the aid of wells and 2D and 3D seismic sold by DBEP (Database Exploration and Production). Were also used as GeoGraphix software package Landmarks modules Prizm and SeisWork 2D and 3D, and the Surfer 8 and ArcGIS 9.2 with the infrastructure provided by the 05 PRH - ANP with LSGI (Laboratory of Seismic and Geological Interpretation) located at UNESP -- Campus de Rio Claro. The work focuses on study the trend of oil-Badejo-Linguado-Pampo, producing fields since the beginning of offshore holdings. The Campos Basin is now known as the offshore basin of the country more productive, and the high structural Badejo is a structure of great importance in the basin presents itself as largely responsible for the conditioning of hydrocarbon fields Pampo, Linguado and Badejo. Therefore this work also aims to increase knowledge of the region in terms of tectonic and stratigraphic characterize the geometry of the structures associated with this major regional structure. For this we used structural contour maps of the main chrono-horizons, and Isopach maps for the purpose of better understanding the tectono-sedimentary evolution of the Campos Basin locally.

Evolução tectonossedimentar dos principais reservatórios de hidrocarbonetos do Campo de Golfinho (Bacia do Espírito Santo)

The Golfinho Field is located in the offshore region of the Espírito Santo Basin. Its importance is linked to the current average production about 19,000 barrels of oil per day, in turbidite reservoirs , giving it the nineteenth placement among the largest oil fields producing of Brazil. By interpretation and correlation’s methods based on 2D seismic sections and geophysical well logs, the study of tectonic-sedimentary evolution of major Golfinho Field’s reservoirs, which are located in Maastrichtian , aims understand and characterize the geological model of the area for the purpose of identify the main structures and types of reservoirs, improving the geological understanding of the area and using this knowledge at similar sets, that may present exploratory success in similar cases. By structural contour maps and geological cross-sections generated since time-depth conversion , the results defined for the geological model of the area , two distinct tectonic styles: a distensinal tectonics style , characterized by grabens and horsts , which belongs to rift phase, and a salt tectonics style, characterized by salt domes , listric faults and folds rolllover folds type, which belongs to marine phase . The interpretation of seismic sections and subsequent analysis of the main deformations present in the Maastrichtian reservoirs rocks ( turbidites ) showed that the northern region of the field is the most affected by salt tectonics . As for reservoirs, it was concluded to be associated to tectonics formed by rollover folds type, being older than listric faults

Contribution to the stratigraphy of the onshore Paraíba Basin, Brazil

Several publications have contributed to improve the stratigraphy of the Paraíba Basin in northeastern Brazil. However, the characterization and distribution of sedimentary units in onshore areas of this basin are still incomplete, despite their significance for reconstructing the tectono-sedimentary evolution of the South American passive margin. This work provides new information to differentiate among lithologically similar strata, otherwise entirely unrelated in time. This approach included morphological, sedimentological and stratigraphic descriptions based on surface and sub-surface data integrated with remote sensing, optically stimulated luminescence dating, U+Th/He dating of weathered goethite, and heavy mineral analysis. Based on this study, it was possible to show that Cretaceous units are constrained to the eastern part of the onshore Paraíba Basin. Except for a few outcrops of carbonatic rocks nearby the modern coastline, deposits of this age are not exposed to the surface in the study area. Instead, the sedimentary cover throughout the basin is constituted by mineralogically and chronologically distinctive deposits, inserted in the Barreiras Formation and mostly in the Post-Barreiras Sediments, of early/middle Miocene and Late Pleistocene-Holocene ages, respectively. The data presented in this work support tectonic deformation as a factor of great relevance to the distribution of the sedimentary units of the Paraíba Basin.