984 resultados para radiação UV-C


Relevância:

100.00% 100.00%

Publicador:

Resumo:

Este trabalho teve por objetivo avaliar o efeito da irradiação UV-C no controle in vitro de Monilinia fructicola e Rhizopus stolonifer e no controle das doenças causadas por estes fungos em pêssegos inoculados com ferimento. No experimento in vitro, avaliou-se o crescimento micelial dos fungos em meio BDA após a exposição nas doses de UV-C de 0, 0,26, 0,52, 1,04, 3,13, 5,22, 10,44, 15,66, e 31,32 kJ.m-2 num equipamento com quatro lâmpadas com taxa de fluência de 1,74 mW.cm-2. Nos experimentos in vivo, os frutos foram tratados com irradiação UV-C de forma protetora e curativa. No tratamento protetor, os frutos foram expostos a 1,04 kJ.m-2 por 1 min. e foram inoculados imediatamente após e 16, 24 e 40 h após. No tratamento curativo, os frutos foram inoculados, incubados e irradiados com doses de UV-C de 0, 1,04, 5,22, 10,44, 15,66 e 31,32 kJ.m². Avaliou-se a incidência das doenças e a severidade da podridão parda. No experimento in vitro, apenas as doses aplicadas durante 1 e 10 min. de exposição reduziram o crescimento micelial de M. fructicola enquanto que a aplicação da luz UV-C entre 10-15 minutos reduziu o crescimento micelial de R. stolonifer e a dose aplicada durante 30 minutos inibiu completamente o crescimento micelial deste fungo. Não houve efeito protetor da luz UV-C no controle das doenças. Não houve controle curativo da podridão parda. A irradiação UV-C foi eficiente no controle curativo da podridão mole e o tempo de exposição de 10 min. foi o que apresentou melhor resultado.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The importance of minimally processed commodities in the retail groceries of most developed countries has been rising continuously during the last decades. Cantaloupe melon is used more than any other fruit in fresh-cut processing. Ultraviolet (UV) light has been extensively used to simulate biological stres in plants and for determining resistance mechanisms of plant tissues. In this study the effect of ultraviolet irradiation on some properties of fresh-cut cantalope melon was determined during storage. Freshly cut cantalope melons cubes treated with ultraviolet irradiation at the doses of 1, 2 or 3 min before storage, and then placed in a cold room at 5±1°C temperature and 85-90% RH. Hue angle values of control group is low compared to UV-C treated samples, whereas L values of is high. EL of UV treated samples higher than those of control group. Total soluble solids of fresh-cut melon samples in UC3 treatment increased during storage. The results indicate that UV-C treatments on fresh-cut cantaloupe melon cubes increased total soluble solids independently from water loss.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The p53 protein is a key regulator of cell responses to DNA damage, and it has been shown that It sensitizes glioma cells to the alkylating agent temozolomide by up-regulating the extrinsic apoptotic pathway, whereas it increases the resistance to chloroethylating agents, such as ACNU and BCNU, probably by enhancing the efficiency of DNA repair. However, because these agents induce a wide variety of distinct DNA lesions, the direct Importance of DNA repair is hard to access. Here, it is shown that the Induction of photoproducts by UV light (UV-C) significantly Induces apoptosis In a p53-mutated glioma background. This Is caused by a reduced level of photoproduct repair, resulting In the persistence of DNA lesions in p53-mutated glioma cells. UV-C-Induced apoptosis in p53 mutant glioma cells Is preceded by strong transcription and replication inhibition due to blockage by unrepaired photolesions. Moreover, the results Indicate that UV-C-induced apoptosis of p53 mutant glioma cells Is executed through the intrinsic apoptotic pathway, with Bcl-2 degradation and sustained Bax and Bak up-regulation. Collectively, the data Indicate that unrepaired DNA lesions Induce apoptosis In p53 mutant gliomas despite the resistance of these gliomas to temozolomide, suggesting that efficiency of treatment of p53 mutant gliomas might be higher with agents that Induce the formation of DNA lesions whose global genomic repair is dependent on p53. (Mol Cancer Res 2009;7(2):237-46)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

A malha rodoviária brasileira apresenta-se, em sua maior extensão, em má condições de serventia. Uma das alternativas para se evitar deformações permanentes e trincamentos no pavimento é a adição, a quente e em reatores especiais, de polímeros ao asfalto. Esta prática já é realizada no Brasil há alguns anos, porém ainda não se tem um domínio do assunto, principalmente no caso da modificação de ligantes asfálticos brasileiros. O objetivo deste trabalho é avaliar a influência de algumas propriedades do polímero modificador no envelhecimento do ligante asfáltico modificado. Para tanto se realizou inicialmente um estudo sobre o mecanismo de envelhecimento de ligantes puros, inclusive frente a radiação ultravioleta do sol, e em seguida utilizou-se a mesma metodologia para avaliar o papel do polímero neste processo. Além disso, relacionou-se através de um projeto de experimentos a massa molar e teor de estireno do polímero SBS linear com suas propriedades clássicas, estabilidade, temperatura de transição vítrea e morfologia. Observou-se que a simulação de envelhecimento UV em laboratório, desenvolvida neste estudo, foi extremamente satisfatória. Os processos de foto-oxidação e termooxidação resultam em mecanismos diferentes de envelhecimento. A origem e composição química dos ligantes é de suma importância no mecanismo de envelhecimento UV destes. A massa molar e o teor de estireno do polímero modificador representam propriedades importantes para a estabilidade e durabilidade do ligante asfáltico modificado.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The application of composite materials and in particular the fiber-reinforced plastics (FRP) has gradually conquered space from the so called conventional materials. However, challenges have arisen when their application occurs in equipment and mechanical structures which will be exposed to harsh environmental conditions, especially when there is the influence of environmental degradation due to temperature, UV radiation and moisture in the mechanical performance of these structures, causing irreversible structural damage such as loss of dimensional stability, interfacial degradation, loss of mass, loss of structural properties and changes in the damage mechanism. In this context, the objective of this thesis is the development of a process for monitoring and modeling structural degradation, and the study of the physical and mechanical properties in FRP when in the presence of adverse environmental conditions (ageing). The mechanism of ageing is characterized by controlled environmental conditions of heated steam and ultraviolet radiation. For the research, it was necessary to develop three polymer composites. The first was a lamina of polyester resin reinforced with a short glass-E fiber mat (representing the layer exposed to ageing), and the other two were laminates, both of seven layers of reinforcement, one being made up only of short fibers of glass-E, and the other a hybrid type reinforced with fibers of glass-E/ fibers of curaua. It should be noted that the two laminates have the lamina of short glass-E fibers as a layer of the ageing process incidence. The specimens were removed from the composites mentioned and submitted to environmental ageing accelerated by an ageing chamber. To study the monitoring and modeling of degradation, the ageing cycles to which the lamina was exposed were: alternating cycles of UV radiation and heated steam, a cycle only of UV radiation and a cycle only of heated steam, for a period defined by norm. The laminates have already undergone only the alternating cycle of UV and heated steam. At the end of the exposure period the specimens were subjected to a structural stability assessment by means of the developed measurement of thickness variation technique (MTVT) and the measurement of mass variation technique (MMVT). Then they were subjected to the mechanical tests of uniaxial tension for the lamina and all the laminates, besides the bending test on three points for the laminates. This study was followed by characterization of the fracture and the surface degradation. Finally, a model was developed for the composites called Ageing Zone Diagram (AZD) for monitoring and predicting the tensile strength after the ageing processes. From the results it was observed that the process of degradation occurs Abstract Raimundo Nonato Barbosa Felipe xiv differently for each composite studied, although all were affected in certain way and that the most aggressive ageing process was that of UV radiation, and that the hybrid laminated fibers of glass-E/curaua composite was most affected in its mechanical properties

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The effect of UV-C irradiation of the TPS and PCL biocomposites with sisal bleached fibers was investigated. The biocomposite was UV-C irradiated at room temperature under air atmosphere. The structural and morphological changes produced when the films were exposed to UV irradiation for 142 h, were monitored using Scanning Electron Microscopy (SEM), Mechanical Tensile Tests, Differential Scanning Calorimetry (DSC), X-ray diffraction, Thermogravimetric analysis (TGA), and Fourier transform infra-red analysis (FTIR). Addition of 5-10% fibers in composites exhibited improved mechanical and thermal properties attributed to more efficient dispersibility of fiber in the matrix and good compatibility between fibers and the matrix polymer, however, after irradiated, the tensile properties decreased due to chain scission. The samples of irradiated PCL and IFS showed crystallinity increase, whereas the blend and composites showed a decrease in crystallinity. The DSC and X-ray diffraction studies suggested interaction between polymers in the blend via carboxyl groups in thermoplastic starch-PCL and hydroxyl groups in fibers. (C) 2011 Elsevier Ltd. All rights reserved.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Foram estudadas trinta e uma cepas fúngicas não identificadas, as quais foram denominadasX1 a X31. O potencial fotoprotetor foi avaliado pela medida espectrofotométrica da absorçãodos extratos na região do UV (280-400 nm). Os extratos com os melhores perfis de absorção em cultura estacionária foram X1, X2, X6, X12, X13, X18, X19, X22, X24 e X31 e, em cultura agitada X4 e X17. A reprodutibilidade do processo foi avaliada e as cepas fúngicas que apresentaram coeficiente de variação menor que 15% foram selecionadas para o estudo de fotoestabilidade. A fotoestabilidade dos extratos foi avaliada pela medida da viabilidade celular de fibroblastos L929 tratados com extratos previamente irradiados sob radiação UVA (11,2 J/cm2) e UVB (3,43 J/cm2) e extratos não irradiados, bem como, pela comparação das áreas sob as curvas de absorção na região do UV dos extratos irradiados e não irradiados. Os extratos selecionados para o estudo de fotoestabilidade foram X4, X12, X19, X22, X24 e X31. Os extratos não irradiados apresentaram os seguintes valores deIC50 para viabilidade celular (citotoxidade): X4-130µg/ml, X19-20µg/ml, X22-10 µg/ml e X24-60µg/ml. Após a radiação UVA e UVB, os extratos apresentaram redução significativa da viabilidade celular em relação ao IC50 dos extratos não irradiados. Sob luz UVB, os extratos X12 (IC50 35µg/ml) e X31 (IC50 70µg/ml) mantiveram a mesma porcentagem de redução da viabilidade celular quando comparado ao IC50 dos extratos não irradiados. No entanto após exposição à luz UVA, o extrato X12 aumentou a viabilidade celular de 50% (quando não irradiado) para 75% (irradiado). Enquanto que o extrato X31, mesmo após a radiação UVA, manteve a mesma redução de 50% da viabilidade celular. Nessa etapa os extratos selecionados foram os X12 e X31. O espectro de absorção na região do UV obtido para o extrato X12 mostrou uma redução da absorbância de 28,3% sob radiação UVB e de 60% sob radiação UVA em relação ao extrato não irradiado. O extrato X31 apresentou uma redução da absorbância de 17,6% e30% sob radiação UVB e UVA respectivamente, em relação ao extrato não irradiado. Os fungos selecionados foram identificados por PCR, sugerindo que o fungo X12 seja o Aspergillus terreus e o X31 seja o Talaromyces pinophilus. Por fim, foi feita a identificação da substância ativa do extrato X12 empregando a técnica de desreplicação, a qual fez o uso da instrumentação analítica acoplada UHPLC-DAD-(ESI)-HRMS associada ao banco de dados Chapman& Hall\'s Dictionary of Natural Products (DNP). No extrato X12 o composto majoritário foi identificado como sendo a citreoviridina. Assim, os resultados do presente trabalho permitiu estabelecer um procedimento para a seleção de fungos produtores de compostos absorvedores de radiação UV, que poderia ser aplicado na obtenção de novos filtros orgânicos naturais para protetores solares.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Several studies have shown that UV-C irradiation promotes the bioactive compounds and antioxidants of fresh fruits and vegetables. The aim of this study was to apply UV irradiation in lemon pomace dried powder for enhancing its phenolic content and antioxidant properties, thus more bioactive compounds should be available for extraction and utilization. Lemon pomace dried powder was placed above the UV lamp and treated with dosages of 4, 19, 80 and 185 kJ m-2, while untreated powder was used as a control. UV-C irradiation significantly affected the total phenolic content, total flavonoid content, proanthocyanidins and antioxidant capacity measured by CUPRAC and FRAP of the lemon pomace dried powder, while it did not affect the vitamin C content. UV-C irradiation of 19 kJ m-2 resulted in 19% higher total phenolic content than the control, while UV-C irradiation of 180 kJ m-2 resulted in 28% higher total flavonoid content than the control. The antioxidant capacity was reduced when UV-C irradiation more than 4 kJ m-2 was applied. The results of this study indicate that UV-C treatment has the potential to increase the extraction of bioactive compounds of lemon dried pomace at relatively high dosages.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

As mudanças climáticas causadas pela degradação da camada de ozônio e pelo aumento da emissão de gases causadores do efeito estufa, podem ocasionar alterações não somente aos seres humanos, mamíferos, répteis ou aves, mas também aos microrganismos. Dentro deste contexto, o aumento nos níveis de radiação solar incidente na superfície da Terra pode afetar as interações que ocorrem entre bactérias e plantas, alterando tanto a ocorrência de doenças como as interações benéficas entre estes organismos. Muitos são os gêneros de bactérias que interagem com as plantas, colonizando os mais diferentes nichos presentes neste hospedeiro. Dentre os grupos bacterianos destacam-se os gêneros Bacillus sp e Pseudomonas sp, que possuem efeitos benéficos como a promoção de crescimento vegetal e a proteção de plantas contra doenças e pragas. Dessa forma, o atual trabalho tem a princípio, como enfoque, constatar a resistência de isolados dos dois gêneros mencionados, à radiação ultravioleta C (200 a 250 nm). Os resultados obtidos demonstram maior resistência da linhagem de Bacillus sp à radiação ultravioleta C em comparação à linhagem de Pseudomonas sp. fato que possivelmente está relacionado com a capacidade de produzir esporos, característica do gênero Bacillus. Este trabalho fornece dados iniciais para futuras avaliações do comportamento destas bactérias quando em interação com plantas e sob maiores níveis de radiação ultravioleta no ambiente.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Brazil has a great diversity of native fruits, which are not always widely consumed, being sold only in certain regions, due to their difficulty of post-harvest conservation. One such fruit is yellow guava, interesting source of nutrients. To promote the consumption and use of this fruit to the consumer public in different regions of the country, this study evaluated the incorporation of yellow Ya-cy araçá in formulating a cereal bar. Therefore, fruits were evaluated for their chemical, physical and chemical characteristics and bioactive compounds in different stages of maturation yellow guava (green, mature and dried forms). The behavior of guava yellow front of to UV-C radiation was also evaluated. After these reviews, there was obtained yellow ripe guava flour after previous tests, was added to the base formulation cereal bar. For the experimental planning and development of the formulations was used factorial design 22 with a central point. The developed formulations were subjected to sensory evaluation using for treatment of multivariate data analysis (Principal Component Analysis- ACP). The preferred formulation in sensory evaluation was evaluated in their physical characteristics (texture), physical-chemical (moisture, ash, lipids, proteins, carbohydrates, dietary fiber and calorie), mineral content and fatty acid profile. The results indicated that the added yellow guava cereal bar developed in this study is one way to application and use of guava, increasing the consumption of fruit to different regions of the country, and can be considered a functional product, not only to contain the fruit in its composition, but also to present many beneficial nutrients that contribute to the health of consumers.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Dissertação de mestrado integrado em Engenharia de Materiais

Relevância:

100.00% 100.00%

Publicador:

Resumo:

A presente patente diz respeito a um dispositivo usado para reduzir a contaminação microbian dos fluidos de corte através de raios ultravioletas, o qual c nsiste em um tampo metálico que se adapta ao reservatório (3) de fluido de corte fechando completamente sua face superior, cujo tampo (1) contém lâmpadas (2) ultravioletas germicidas (UV-C), dispostas lado a lado, apresentando, ainda, pequenas janel s (4) para observação dispostas lateralmente e interruptor (5) ara as lâmpadas (2), sendo que os reatores das lâmpadas (2) s o instalados sobre uma chapa metálica (6).