Proposals for improvement of methodology and process of collecting and analyzing compatibility of power quality indicators in distribution systems

This article aims to present proposals for improvement of key standards and resolutions concerned about the methodology for calculating the indicator of total harmonic voltage distortion, and should contribute to the process of examining the compatibility of potentially disturbing loads in electric power quality in distribution systems. These proposals were drawn from the analysis of results from measurement campaigns conducted in a case study including analysis of the connection of a new induction furnace in a foundry served by a distributor of São Paulo state. A general historical situating the quality of electric energy in the electricity sector is presented, and methodological guidelines and procedures used in experimental trials are shown. The analysis and discussion of results are prepared to answer the main questions that arise during the implementation of standards, resolutions and procedures. © 2011 IEEE.

Analysis of quality indicators of central sterile supply departments at accredited public hospitals

O objetivo do estudo foi descrever e analisar os indicadores de qualidade de Centros de Material e Esterilização de hospitais públicos acreditados do Estado de São Paulo e sua gestão pelos responsáveis do setor. Trata-se de um estudo de casos múltiplos, onde são apresentados os dados interligados de três hospitais acreditados num relatório de casos cruzados. Os dados foram coletados por entrevista semiestruturada com o responsável e por visita técnica com análise documental. Os resultados constatam a dificuldade dos responsáveis em pontuar os indicadores específicos do setor e os referidos foram os de produção e pesquisa de satisfação do cliente que não retratam a qualidade efetiva do serviço, pois são fragmentados, sem consolidação de resultados na busca de melhorias, o que sugere baixa especificidade e baixa sensibilidade dos critérios da Organização Nacional de Acreditação à realidade deste setor.

Applying validated quality indicators to surgical antibiotic prophylaxis in a Brazilian hospital: Learning what should be learned

Background: Compliance with the best surgical antibiotic prophylaxis practice is usually low despite many published guidelines. Objective: This study investigated compliance with the Hospital Infection Control Committee guideline for antibiotic prophylaxis in a Brazilian hospital using quality indicators. Methods: A retrospective study was carried out from November 2009 to March 2010. Medical records from adult inpatients undergoing cardiac, neurologic, and orthopedic clean surgeries were included. The full compliance index was considered 100% when the antibiotic prophylaxis showed adequacy in all evaluated attributes. Analyses were conducted with 5% significance. Results: Medical records from 101 cardiac, 128 neurologic, and 519 orthopedic surgical patients were evaluated. The compliance index was 4.9%, and the compliance index according to specialty was 5.8%, 3.1%, and 3.0%, respectively, for orthopedic, neurologic, and cardiac surgeries. The attribute route of administration produced the best outcomes, whereas the attribute duration of antibiotic prophylaxis produced the worst. No association was identified between compliance to the attributes and patient characteristics. Conclusion: This study showed a low level of adherence to Hospital Infection Control Committee guidelines for antibiotic prophylaxis. This suggests that different strategies should be implemented to promote the best possible practice in the field of antibiotic prophylaxis with greater surgeon engagement. Copyright (C) 2012 by the Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.

Nursing care time and quality indicators for adult intensive care: correlation analysis

The objective of this quantitative, correlational and descriptive study was to analyze the time the nursing staff spends to assist patients in Adult Intensive Care Units, as well as to verify its correlation with quality care indicators. The average length of time spent on care and the quality care indicators were identified by consulting management instruments the nursing head of the Unit employs. The average hours of nursing care delivered to patients remained stable, but lower than official Brazilian agencies' indications. The correlation between time of nursing care and the incidence of accidental extubation indicator indicated that it decreases with increasing nursing care delivered by nurses. The results of this investigation showed the influence of nursing care time, provided by nurses, in the outcome of care delivery.

Selection of Top 10 Quality Indicators for Nutrition Therapy

Background: The identification of useful quality indicators for nutrition therapy (QINTs) is of great interest and a challenge. This study attempted to identify the 10 QINTs that best suit the practice of quality control in nutrition therapy (NT) by evaluating the opinion of experts in NT with the use of psychometric techniques and statistical tools. Methods: Thirty-six QINTs available for clinical application in Brazil were assessed in 2 distinct phases. In phase 1, 26 nutrition experts ranked QINTs by scoring 4 attributes (utility, simplicity, objectivity, low cost) to assess each QINT on a 5-point Likert scale. The top 10 QINTs were identified from the 10 best scores obtained, and the reliability of expert opinion for each indicator was assessed by Cronbach's alpha. In phase 2, experts provided feedback regarding the selected top 10 QINTs by answering 2 closed questions. Results: The top 10 QINTs, in descending order, are the frequency of nutrition screening of hospitalized patients, diarrhea, involuntary withdrawal of enteral feeding tubes, feeding tube obstruction, fasting longer than 24 hours, glycemic dysfunction, estimated energy expenditure and protein needs, central venous catheter infection, compliance of NT indication, and frequency of application of subjective global assessment. Opinions were consistent among the interviewed experts. During feedback, 96% of experts were satisfied with the top 10 QINTs, and 100% had considered them in accordance with their previous opinion. Conclusion: The top 10 QINTs were identified according to their usefulness in clinical practice by obtaining adequate agreement and representativeness of opinion of nutrition experts. (Nutr Clin Pract. 2012;27:261-267)

Validation of candidate smear microscopy quality indicators, extracted from tuberculosis laboratory registers

SETTING: Kinshasa Province, Democratic Republic of Congo. OBJECTIVE: To identify and validate register-based indicators of acid-fast bacilli (AFB) microscopy quality. DESIGN: Selection of laboratories based on reliability and variation in routine smear rechecking results. Calculation of relative sensitivity (RS) compared to recheckers and its correlation coefficient (R) with candidate indicators based on a fully probabilistic analysis incorporating vague prior information using WinBUGS. RESULTS: The proportion of positive follow-up smears correlated well (median R 0.81, 95% credibility interval [CI] 0.58-0.93), and the proportion of first smear-positive cases fairly (median R 0.70, 95% CI 0.38-0.89) with RS. The proportions of both positive suspect and low positive case smears showed poor correlations (median R 0.27 and -0.22, respectively, with ranges including zero). CONCLUSIONS: The proportion of positives in follow-up smears is the most promising indicator of AFB smear sensitivity, while the proportion of positive suspects may be more indicative of accessibility and suspect selection. Both can be obtained from simple reports, and should be used for internal and external monitoring and as guidance for supervision. As proportion of low positive suspect smears and consistency within case series are more difficult to interpret, they should be used only on-site by laboratory professionals. All indicators require more research to define their optimal range in various settings.

The MISLEM Project : developing meta-level quality indicators for establishing a systematic linkage between educational institutions and the labour market:education, employment and graduate employability: project manual

The MISLEM Project comprised representatives from Higher and Vocational Education in four partner countries, Austria, Romania, Slovenia and the UK. In addition to this, representatives from a major UK graduate employment agency and the Austria Quality Assurance Agency were also involved. At the inaugural meeting of the Project, partner teams discussed and agreed upon appropriate methodological processes with which to carry the Project forward.

Geospatial data quality indicators

Indicators which summarise the characteristics of spatiotemporal data coverages significantly simplify quality evaluation, decision making and justification processes by providing a number of quality cues that are easy to manage and avoiding information overflow. Criteria which are commonly prioritised in evaluating spatial data quality and assessing a dataset’s fitness for use include lineage, completeness, logical consistency, positional accuracy, temporal and attribute accuracy. However, user requirements may go far beyond these broadlyaccepted spatial quality metrics, to incorporate specific and complex factors which are less easily measured. This paper discusses the results of a study of high level user requirements in geospatial data selection and data quality evaluation. It reports on the geospatial data quality indicators which were identified as user priorities, and which can potentially be standardised to enable intercomparison of datasets against user requirements. We briefly describe the implications for tools and standards to support the communication and intercomparison of data quality, and the ways in which these can contribute to the generation of a GEO label.

Effect of foliar application of Cu, Zn, and Mn on yield and quality indicators of winter wheat grain

Micronutrients are part of many crucial physiological plant processes. The combined application of N and micronutrients helps in obtaining grain yield with beneficial technological and consumer properties. The main micronutrients needed by cereals include Cu, Mn, and Zn. The subject of this study was to determine yield, quality indicators (protein content and composition, gluten content, grain bulk density, Zeleny sedimentation index, and grain hardness), as well as mineral content (Cu, Zn, Mn, Fe) in winter wheat grain ( Triticum aestivum L.) fertilized by foliar micronutrient application. A field experiment was carried out at the Educational and Experimental Station in Tomaszkowo, Poland. The application of mineral fertilizers (NPK) supplemented with Cu increased Cu content (13.0%) and ω, α/β, and γ (18.7%, 4.9%, and 3.4%, respectively) gliadins in wheat grain. Foliar Zn fertilization combined with NPK increased Cu content (14.9%) as well as high (HMW) and low molecular weight (LMW) glutenins (38.8% and 6.7%, respectively). Zinc fertilization significantly reduced monomeric gliadin content and increased polymeric glutenin content in grain, which contributed in reducing the gliadin:glutenin ratio (0.77). Mineral fertilizers supplemented with Mn increased Fe content in wheat grain (14.3%). It also significantly increased protein (3.8%) and gluten (4.4%) content, Zeleny sedimentation index (12.4%), and grain hardness (18.5%). Foliar Mn fertilization increased the content of ω, α/β, and γ gliadin fractions (19.9%, 9.5%, and 2.1%, respectively), as well as HMW and LMW glutenins (18.9% and 4.5%, respectively). Mineral NPK fertilization, combined with micronutrients (Cu + Zn + Mn), increased Cu and Zn content in grain (22.6% and 17.7%, respectively). The content of ω, α/β, and γ gliadins increased (20.3%, 10.5%, and 12.1%, respectively) as well as HMW glutenins (7.9%).

Benchmarking clinical indicators of quality for Australian residential aged care facilities

To undertake exploratory benchmarking of a set of clinical indicators of quality care in residential care in Australia, data were collected from 107 residents within four medium-sized facilities (40–80 beds) in Brisbane, Australia. The proportion of residents in each sample facility with a particular clinical problem was compared with US Minimum Data Set quality indicator thresholds. Results demonstrated variability within and between clinical indicators, suggesting breadth of assessment using various clinical indicators of quality is an important factor when monitoring quality of care. More comprehensive and objective measures of quality of care would be of great assistance in determining and monitoring the effectiveness of residential aged care provision in Australia, particularly as demands for accountability by consumers and their families increase. What is known about the topic? The key to quality improvement is effective quality assessment, and one means of evaluating quality of care is through clinical outcomes. The Minimum Data Set quality indicators have been credited with improving quality in United States nursing homes. What does this paper add? The Clinical Care Indicators Tool was used to collect data on clinical outcomes, enabling comparison of data from a small Australian sample with American quality benchmarks to illustrate the utility of providing guidelines for interpretation. What are the implications for practitioners? Collecting and comparing clinical outcome data would enable practitioners to better understand the quality of care being provided and whether practices required review. The Clinical Care Indicator Tool could provide a comprehensive and systematic means of doing this, thus filling a gap in quality monitoring within Australian residential aged care.

Clinical indicators of quality for Australian residential aged care facilities : establishing reliability, validity, and quality thresholds

Background: In response to the need for more comprehensive quality assessment within Australian residential aged care facilities, the Clinical Care Indicator (CCI) Tool was developed to collect outcome data as a means of making inferences about quality. A national trial of its effectiveness and a Brisbane-based trial of its use within the quality improvement context determined the CCI Tool represented a potentially valuable addition to the Australian aged care system. This document describes the next phase in the CCI Tool.s development; the aims of which were to establish validity and reliability of the CCI Tool, and to develop quality indicator thresholds (benchmarks) for use in Australia. The CCI Tool is now known as the ResCareQA (Residential Care Quality Assessment). Methods: The study aims were achieved through a combination of quantitative data analysis, and expert panel consultations using modified Delphi process. The expert panel consisted of experienced aged care clinicians, managers, and academics; they were initially consulted to determine face and content validity of the ResCareQA, and later to develop thresholds of quality. To analyse its psychometric properties, ResCareQA forms were completed for all residents (N=498) of nine aged care facilities throughout Queensland. Kappa statistics were used to assess inter-rater and test-retest reliability, and Cronbach.s alpha coefficient calculated to determine internal consistency. For concurrent validity, equivalent items on the ResCareQA and the Resident Classification Scales (RCS) were compared using Spearman.s rank order correlations, while discriminative validity was assessed using known-groups technique, comparing ResCareQA results between groups with differing care needs, as well as between male and female residents. Rank-ordered facility results for each clinical care indicator (CCI) were circulated to the panel; upper and lower thresholds for each CCI were nominated by panel members and refined through a Delphi process. These thresholds indicate excellent care at one extreme and questionable care at the other. Results: Minor modifications were made to the assessment, and it was renamed the ResCareQA. Agreement on its content was reached after two Delphi rounds; the final version contains 24 questions across four domains, enabling generation of 36 CCIs. Both test-retest and inter-rater reliability were sound with median kappa values of 0.74 (test-retest) and 0.91 (inter-rater); internal consistency was not as strong, with a Chronbach.s alpha of 0.46. Because the ResCareQA does not provide a single combined score, comparisons for concurrent validity were made with the RCS on an item by item basis, with most resultant correlations being quite low. Discriminative validity analyses, however, revealed highly significant differences in total number of CCIs between high care and low care groups (t199=10.77, p=0.000), while the differences between male and female residents were not significant (t414=0.56, p=0.58). Clinical outcomes varied both within and between facilities; agreed upper and lower thresholds were finalised after three Delphi rounds. Conclusions: The ResCareQA provides a comprehensive, easily administered means of monitoring quality in residential aged care facilities that can be reliably used on multiple occasions. The relatively modest internal consistency score was likely due to the multi-factorial nature of quality, and the absence of an aggregate result for the assessment. Measurement of concurrent validity proved difficult in the absence of a gold standard, but the sound discriminative validity results suggest that the ResCareQA has acceptable validity and could be confidently used as an indication of care quality within Australian residential aged care facilities. The thresholds, while preliminary due to small sample size, enable users to make judgements about quality within and between facilities. Thus it is recommended the ResCareQA be adopted for wider use.

Chemical, biochemical and microbiological indicators to assess soil quality in temperate agro-ecosystems

Soil is a critically important component of the earth’s biosphere. Developing agricultural production systems able to conserve soil quality is essential to guarantee the current and future capacity of soil to provide goods and services. This study investigates the potential of microbial and biochemical parameters to be used as early and sensitive soil quality indicators. Their ability to differentiate plots under contrasting fertilization regimes is evaluated based also on their sensitivity to seasonal fluctuations of environmental conditions and on their relationship with soil chemical parameters. Further, the study addresses some of the critical methodological aspects of microplate-based fluorimetric enzyme assays, in order to optimize assay conditions and evaluate their suitability to be used as a toll to asses soil quality. The study was based on a long-term field experiment established in 1966 in the Po valley (Italy). The soil was cropped with maize (Z. mays L.) and winter wheat (T. aestivum L.) and received no organic fertilization, crop residue or manure, in combination with increasing levels of mineral N fertilizer. The soil microbiota responded to manure amendment increasing it biomass and activity and changing its community composition. Crop residue effect was much more limited. Mineral N fertilization stimulated crop residue mineralization, shifted microbial community composition and influenced N and P cycling enzyme activities. Seasonal fluctuations of environmental factors affected the soil microbiota. However microbial and biochemical parameters seasonality did not hamper the identification of fertilization-induced effects. Soil microbial community abundance, function and composition appeared to be strongly related to soil organic matter content and composition, confirming the close link existing between these soil quality indicators. Microplate-based fluorimetric enzyme assays showed potential to be used as fast and throughput toll to asses soil quality, but required proper optimization of the assay conditions for a precise estimation of enzymes maximum potential activity.

High quality indoor environments for office buildings

The quality of office indoor environments is considered to consist of those factors that impact the occupants according to their health and well-being and (by consequence) their productivity. Indoor Environment Quality (IEQ) can be characterized by four indicators: • Indoor air quality indicators • Thermal comfort indicators • Lighting indicators • Noise indicators. Within each indicator, there are specific metrics that can be utilized in determining an acceptable quality of an indoor environment based on existing knowledge and best practice. Examples of these metrics are: indoor air levels of pollutants or odorants; operative temperature and its control; radiant asymmetry; task lighting; glare; ambient noise. The way in which these metrics impact occupants is not fully understood, especially when multiple metrics may interact in their impacts. It can be estimated that the potential cost of lost productivity from poor IEQ may be much in excess of other operating costs of a building. However, the relative productivity impacts of each of the four indicators is largely unknown. The CRC Project ‘Regenerating Construction to Enhance Sustainability’ has a focus on IEQ impacts before and after building refurbishment. This paper provides an overview of IEQ impacts and criteria and the implementation of a CRC project that is currently researching these factors during the refurbishment of a Melbourne office building. IEQ measurements and their impacts will be reported in a future paper