Atmospheric pollutants monitoring by analysis of epiphytic lichens

The Canoparmelia texana epiphytic lichenized fungi was used to monitor atmospheric pollution in the Sao Paulo metropolitan region, SP, Brazil. The cluster analysis applied to the element concentration values confirmed the site groups of different levels of pollution due to industrial and vehicular emissions. In the distribution maps of element concentrations, higher concentrations of Ba and Mn were observed in the vicinity of industries and of a petrochemical complex. The highest concentration of Co found in lichens from the Sao Miguel Paulista site is due to the emissions from a metallurgical processing plant that produces this element. For Br and Zn, the highest concentrations could be associated both to vehicular and industrial emissions. Exploratory analyses revealed that the accumulation of toxic elements in C. texana may be of use in evaluating the human risk of cardiopulmonary mortality due to prolonged exposure to ambient levels of air pollution. (c) 2007 Elsevier Ltd. All rights reserved.

Metabolic syndrome in fixed-shift workers

OBJECTIVE To analyze if metabolic syndrome and its altered components are associated with demographic, socioeconomic and behavioral factors in fixed-shift workers.METHODS A cross-sectional study was conducted on a sample of 902 shift workers of both sexes in a poultry processing plant in Southern Brazil in 2010. The diagnosis of metabolic syndrome was determined according to the recommendations from Harmonizing the Metabolic Syndrome. Its frequency was evaluated according to the demographic (sex, skin color, age and marital status), socioeconomic (educational level, income and work shift), and behavioral characteristics (smoking, alcohol intake, leisure time physical activity, number of meals and sleep duration) of the sample. The multivariate analysis followed a theoretical framework for identifying metabolic syndrome in fixed-shift workers.RESULTS The prevalence of metabolic syndrome in the sample was 9.3% (95%CI 7.4;11.2). The most frequently altered component was waist circumference (PR 48.4%; 95%CI 45.5;51.2), followed by high-density lipoprotein. Work shift was not associated with metabolic syndrome and its altered components. After adjustment, the prevalence of metabolic syndrome was positively associated with women (PR 2.16; 95%CI 1.28;3.64), workers aged over 40 years (PR 3.90; 95%CI 1.78;8.93) and those who reported sleeping five hours or less per day (PR 1.70; 95%CI 1.09;2.24). On the other hand, metabolic syndrome was inversely associated with educational level and having more than three meals per day (PR 0.43; 95%CI 0.26;0.73).CONCLUSIONS Being female, older and deprived of sleep are probable risk factors for metabolic syndrome, whereas higher educational level and higher number of meals per day are protective factors for metabolic syndrome in fixed-shift workers.

Pork Value Chains: A Comparison of Catalonia, Spain and Manitoba, Canada

The purpose of this paper is to provide a comparative analysis of pork value chains in Catalonia, Spain and Manitoba, Canada. Intensive hog production models were implemented in Catalonia in the 1960s as a result of agriculture crises and fostered by feedstuffs factories. The expansion of the hog sector in Manitoba is more recent (in the 1990s) and brought about in large part by the opening of the Maple Leaf Meats processing plant in Brandon, Manitoba. This plant is capable of processing 90,000 hogs per week. Both hog production models ‐ the ‘older’ one in Catalonia (Spain) and the ‘newer’ in Manitoba‐ have been, until recently, examples of success. Inventories and production have been increasing substantially and both regions have proven to have great export potential. Recently, however, tensions have been developing with the hog production models of both regions, particularly as they relate to environmental concerns. The purpose of the paper is to compare the value chains with respect to their origins (e.g. supply a growing demand for pork, ensure farm profitability) and present states (e.g. environmental concerns, profitability). Keywords: pork value chain, hog farms, agri‐food studies. JEL: Q10, Q13, O57

Reclaimed Fly Ash as Select Fill Under PCC Pavement, November 1999

With the support of the Iowa Fly Ash Affiliates, research on reclaimed fly ash for use as a construction material has been ongoing since 1991. The material exhibits engineering properties similar to those of soft limestone or sandstone and a lightweight aggregate. It is unique in that it is rich in calcium, silica, and aluminum and exhibits pozzolanic properties (i.e. gains strength over time) when used untreated or when a calcium activator is added. Reclaimed Class C fly ashes have been successfully used as a base material on a variety of construction projects in southern and western Iowa. A pavement design guide has been developed with the support of the Iowa Fly Ash Affiliates. Soils in Iowa generally rate fair to poor as subgrade soils for paving projects. This is especially true in the southern quarter of the state and for many areas of eastern and western Iowa. Many of the soil types encountered for highway projects are unsuitable soils under the current Iowa DOT specifications. The bulk of the remaining soils are Class 10 soils. Select soils for use directly under the pavement are often difficult to find on a project, and in many instances are economically unavailable. This was the case for a 4.43-mile grading (STP-S- 90(22)-SE-90) and paving project in Wapello County. The project begins at the Alliant Utilities generating station in Chillicothe, Iowa, and runs west to the Monroe-Wapello county line. This road carries a significant amount of truck traffic hauling coal from the generating station to the Cargill corn processing plant in Eddyville, Iowa. The proposed 10-inch Portland Cement Concrete (PCC) pavement was for construction directly on a Class 10 soil subgrade, which is not a desirable condition if other alternatives are available. Wapello County Engineer Wendell Folkerts supported the use of reclaimed fly ash for a portion of the project. Construction of about three miles of the project was accomplished using 10 inches of reclaimed fly ash as a select fill beneath the PCC slab. The remaining mile was constructed according to the original design to be used as a control section for performance monitoring. The project was graded during the summers of 1998 and 1999. Paving was completed in the fall of 1999. This report presents the results of design considerations and laboratory and field testing results during construction. Recommendations for use of reclaimed fly ash as a select fill are also presented.

Estudi de la viabilitat econòmica de la implantació d'una planta de piròlisi per a la producció de biochar en un context local i comarcal

En aquest document es pretén estudiar de la viabilitat econòmica de la implantació d’una planta de piròlisi per a la producció de biochar o char en un context local i comarcal. La biomassa és una font d’energia que genera uns rendiments energètics prou interesants i d’una manera respectuosa amb el medi ambient. Així doncs, la teòrica planta utilitzarà biomassa que, a traves del tractament termoquímic de la piròlisi, ens generarà uns productes que són d’utilitat per l’obtenció d’energia d’una manera respectuosa amb el medi ambient. Abans de fer l’anàlisi econòmic, hi ha una explicació extensa dels processos termoquímics, com són la piròlisi, la gasificació i la torrefacció. Posteriorment, es du a terme una revisió de l’estat actual de les tecnologies de conversió de biomassa a Catalunya i finalment es realitza un inventari i anàlisi dels usos de la biomassa a Catalunya, en el qual es parla principalment de l’estella el pèl·let, així com també de la seva producció, consum i exportació. El nostre anàlisi econòmic de la planta de processament de biomassa es durà a terme a nivell local, és a dir en un municipi, i també a nivell comarcal a Catalunya. A partir del processament de biomassa per mitja de la piròlisi, obtindrem uns productes, entre els quals el biochar, que serà un dels productes finals per poder vendre. L’altre producte serà el pèl·let de biochar, que l’obtindrem a través del procés de pel·letització. Aquest procés ens permetrà densificar el mateix biochar i obtenir-ne pèl·lets amb un poder calorífic superior, com també el seu possible preu de venda final. En aquest anàlisi econòmic plantejarem diferents escenaris tant a nivell local com comarcal, és a dir, farem variar diferents paràmetres de la planta, com poden ser els dies, les hores de treball, el sou dels treballadors, l’existència de procés de pel·letització...per veure la viabilitat del nostre projecte. Aquesta viabilitat la mesurarem amb diferents Índexs, entre els quals hi ha l’Índex de Rendibilitat, que ens determinarà si el projecte és possible si el seu valor és més gran a 1.

Laite- ja työturvallisuus H2S-tiloissa

Tässä työssä selvitettiin, millä tavoin räjähdysvaarallisten työtilojen työturvallisuuteen voidaan vaikuttaa ja miten turvallisuutta pidetään yllä. Työssä selvitettiin, mitä vaatimuksia räjähdysvaaralliset tilat asettavat laite- ja työturvallisuudelle. Työn lähtökohdaksi otettiin ilmanvaihdon vaikutus sisäilman olosuhteisiin ja samalla selvitettiin, mitä muutoksia räjähdysvaarallisten aineiden käyttö teollisuuden tuotantoprosesseissa aiheuttaa ilmanvaihdossa. Räjähdysvaarallisten tilojen suunnittelua ohjailevat säädökset, lait ja direktiivit. Johdonmukaisen suunnittelulla ja säädöksiä noudattamalla pystytään toteuttamaan turvallinen työympäristö. Räjähdysvaarallista tilaa päästiin tarkastelemaan Talvivaaran Kaivososakeyhtiö Oyj:n metallien talteenottolaitoksella. Työssä haluttiin tutkia rakennuksen työturvallisuutta ja työskentelyolosuhteita. Tutkimuskohteena olleessa reaktorihallissa tehtiin ilmanvaihdon suorituskyvyn mittauksia. Tarkoituksena oli myös tehdä rikkivedyn pitoisuus mittauksia, mutta Talvivaaran tuotannon viivästyessä, pitoisuus mittaukset jätettiin tämän diplomityön ulkopuolelle. Talvivaaraan reaktorirakennuksen olosuhteita ja turvallisuutta tarkasteltiin lähemmin teoreettisten laskelmien avulla. Laskelmien ja mittaustulosten perusteella reaktorirakennuksen ilmanvaihdon suorituskyky todettiin riittäväksi ja toiminta työturvalliseksi. Riskin arvioinnin perusteella reaktorirakennuksen riskitason katsotaan olevan siedettävä.

Active sulphide mine tailings impoundments as sources of contaminated drainage: controlling factors, methods of characterisation and geochemical constraints for mitigation

Low quality mine drainage from tailings facilities persists as one of the most significant global environmental concerns related to sulphide mining. Due to the large variation in geological and environmental conditions at mine sites, universal approaches to the management of mine drainage are not always applicable. Instead, site-specific knowledge of the geochemical behaviour of waste materials is required for the design and closure of the facilities. In this thesis, tailings-derived water contamination and factors causing the pollution were investigated in two coeval active sulphide mine sites in Finland: the Hitura Ni mine and the Luikonlahti Cu-Zn-Co-Ni mine and talc processing plant. A hydrogeochemical study was performed to characterise the tailingsderived water pollution at Hitura. Geochemical changes in the Hitura tailings were evaluated with a detailed mineralogical and geochemical investigation (solid-phase speciation, acid mine drainage potential, pore water chemistry) and using a spatial assessment to identify the mechanisms of water contamination. A similar spatial investigation, applying selective extractions, was carried out in the Luikonlahti tailings area for comparative purposes (Hitura low-sulphide tailings vs. Luikonlahti sulphide-rich tailings). At both sites, hydrogeochemistry of tailings seepage waters was further characterised to examine the net results of the processes observed within the impoundments and to identify constraints for water treatment. At Luikonlahti, annual and seasonal variation in effluent quality was evaluated based on a four-year monitoring period. Observations pertinent to future assessment and mine drainage prevention from existing and future tailings facilities were presented based on the results. A combination of hydrogeochemical approaches provided a means to delineate the tailings-derived neutral mine drainage at Hitura. Tailings effluents with elevated Ni, SO₄ ^2- and Fe content had dispersed to the surrounding aquifer through a levelled-out esker and underneath the seepage collection ditches. In future mines, this could be avoided with additional basal liners in tailings impoundments where the permeability of the underlying Quaternary deposits is inadequate, and with sufficiently deep ditches. Based on the studies, extensive sulphide oxidation with subsequent metal release may already initiate during active tailings disposal. The intensity and onset of oxidation depended on e.g. the Fe sulphide content of the tailings, water saturation level, and time of exposure of fresh sulphide grains. Continuous disposal decreased sulphide weathering in the surface of low-sulphide tailings, but oxidation initiated if they were left uncovered after disposal ceased. In the sulphide-rich tailings, delayed burial of the unsaturated tailings had resulted in thick oxidized layers, despite the continuous operation. Sulphide weathering and contaminant release occurred also in the border zones. Based on the results, the prevention of sulphide oxidation should already be considered in the planning of tailings disposal, taking into account the border zones. Moreover, even lowsulphide tailings should be covered without delay after active disposal ceases. The quality of tailings effluents showed wide variation within a single impoundment and between the two different types of tailings facilities assessed. The affecting factors included source materials, the intensity of weathering of tailings and embankment materials along the seepage flow path, inputs from the process waters, the water retention time in tailings, and climatic seasonality. In addition, modifications to the tailings impoundment may markedly change the effluent quality. The wide variation in the tailings effluent quality poses challenges for treatment design. The final decision on water management requires quantification of the spatial and seasonal fluctuation at the site, taking into account changes resulting from the eventual closure of the impoundment. Overall, comprehensive hydrogeochemical mapping was deemed essential in the identification of critical contaminants and their sources at mine sites. Mineralogical analysis, selective extractions, and pore water analysis were a good combination of methods for studying the weathering of tailings and in evaluating metal mobility from the facilities. Selective extractions with visual observations and pH measurements of tailings solids were, nevertheless, adequate in describing the spatial distribution of sulphide oxidation in tailings impoundments. Seepage water chemistry provided additional data on geochemical processes in tailings and was necessary for defining constraints for water treatment.

Analysis of patterns in mining time series using Qlucore

Raw measurement data does not always immediately convey useful information, but applying mathematical statistical analysis tools into measurement data can improve the situation. Data analysis can offer benefits like acquiring meaningful insight from the dataset, basing critical decisions on the findings, and ruling out human bias through proper statistical treatment. In this thesis we analyze data from an industrial mineral processing plant with the aim of studying the possibility of forecasting the quality of the final product, given by one variable, with a model based on the other variables. For the study mathematical tools like Qlucore Omics Explorer (QOE) and Sparse Bayesian regression (SB) are used. Later on, linear regression is used to build a model based on a subset of variables that seem to have most significant weights in the SB model. The results obtained from QOE show that the variable representing the desired final product does not correlate with other variables. For SB and linear regression, the results show that both SB and linear regression models built on 1-day averaged data seriously underestimate the variance of true data, whereas the two models built on 1-month averaged data are reliable and able to explain a larger proportion of variability in the available data, making them suitable for prediction purposes. However, it is concluded that no single model can fit well the whole available dataset and therefore, it is proposed for future work to make piecewise non linear regression models if the same available dataset is used, or the plant to provide another dataset that should be collected in a more systematic fashion than the present data for further analysis.

Rational use of water in a poultry slaughterhouse in the state of Paraná, Brazil: a case study

Agroindustries are major consumers of water. However, to adapt to environmental trends and be competitive in the market, they have sought rational use of water through water management in their activities. Cleaner Production can result in economic, environmental and social benefits, and in actions that promote reduction in water consumption. This case study was conducted in a slaughterhouse and poultry cold storage processing plant and aimed to identify points of excessive water consumption, and to propose alternatives for managing water resources by reducing consumption. Consumption data are presented in relation to the processing stages with alternatives proposed for the rational use of water, such as closure of mains water during shift changes. Following the implementation of recommendations, a reduction in water consumption of approximately 11,137 m³ per month was obtained, which equates to a savings of US$ 99,672 per year. From this study, it was concluded that the company under review could develop various improvement actions and make an important contribution to the preservation of water resources in the region where it operates.

Käyttövarmuusanalyysin tuottama tärkeysjärjestys elintarviketeollisuuden prosessilaitteille – Suuntaviivat kustannustietoisen kunnossapitostrategian luomiselle

Hallitsematon ja reaktiivinen kunnossapito on eräs tuotannon suurimpia kustannustekijöistä. Suunnitelmallisesti ja systemaattisesti johdettuna kunnossapito on tuotantotehokkuuden suurin vaikuttaja. Merkittävä osa tuotannon tehokkuuden ylläpidosta saavutetaan laitteiden käyttövarmuudella. Käyttövarmuuden saaminen hallintaan perustuu ennakoivan kunnossapidon määrän kasvattamiseen. Samalla korjaavan kunnossapidon kustannusriski laskee ja siihen käytetty panos vähenee. Huonolla kunnossapidon suunnitelmallisuudella on päinvastaiset vaikutukset. Tavoitteena on määritellä prosessilaitteiden käyttövarmuuksiin perustuva laitekriittisyys. Tutkimuksessa yhdistetään riskien arviointimenetelmiä, joilla keskimääräiset vikavälit ja seuraukset valmistukseen mallinnetaan. Kriittisyystekijöitä ovat käytettävyys, luotettavuus, kustannustekijät, turvallisuus ja ympäristövaikutukset. Tekijöiden arvottamiseen kehitettiin riksianalyysitaulukko. Kriittisyysluokat jaettiin kolmeen kategoriaan, joista A on kriittisin, B keskinkertainen ja C on matalin luokka. Lähtötietojen keräys toteutettiin triangulaatiomenetelmää soveltaen. Empiirisessä osassa HKScan Oy:n lihanjalostustehtaan jauheliha- ja kestomakkaraosastojen laitteet jaettiin A-, B- ja C-luokkiin. Kriittisimpiä laitteita oli 20 prosenttia analysoidusta laitemäärästä. Nämä A-luokkaan sijoitetut laitteet aiheuttavat 80 prosenttia kustannusriskeistä. B-luokkaan kuuluu 50 prosenttia ja C-luokkaan 30 prosenttia laitteista. Luokittelusta erotettiin havaitut turvallisuusriskit riskienhallinnan toimenpiteitä varten. Kustannustietoinen kriittisyysluokittelu on pohja kunnossapitostrategian rakentamiselle. Tämän avuksi esitettiin taulukot huolto-ohjelman luomiseen ja luokituksien hyödyntämiseen päivittäisessä toiminnassa.

Experimental results and modeling of poultry carcass cooling by water immersion

Poultry carcasses have to be chilled to reduce the central breast temperatures from approximately 40 to 4 °C, which is crucial to ensure safe products. This work investigated the cooling of poultry carcasses by water immersion. Poultry carcasses were taken directly from an industrial processing plant and cooled in a pilot chiller, which was built to investigate the influence of the method and the water stirring intensity on the carcasses cooling. A simplified empiric mathematical model was used to represent the experimental results. These results indicated clearly that the understanding and quantification of heat transfer between the carcass and the cooling water is crucial to improve processes and equipment. The proposed mathematical model is a useful tool to represent the dynamics of carcasses cooling, and it can be used to compare different chiller operational conditions in industrial plants. Therefore, this study reports data and a simple mathematical tool to handle an industrial problem with little information available in the literature.

Brazil nut sorting for aflatoxin prevention: a comparison between automatic and manual shelling methods

The impact of automatic and manual shelling methods during manual/visual sorting of different batches of Brazil nuts from the 2010 and 2011 harvests was evaluated in order to investigate aflatoxin prevention.The samples were tested as follows: in-shell, shell, shelled, and pieces in order to evaluate the moisture content (mc), water activity (Aw), and total aflatoxin (LOD = 0.3 µg/kg and LOQ 0.85 µg/kg) at the Brazil nut processing plant. The results of aflatoxins obtained for the manually shelled nut samples ranged from 3.0 to 60.3 µg/g and from 2.0 to 31.0 µg/g for the automatically shelled samples. All samples showed levels of mc below the limit of 15%; on the other hand, shelled samples from both harvests showed levels of Aw above the limit. There were no significant differences concerning the manual or automatic shelling results during the sorting stages. On the other hand, the visual sorting was effective in decreasing the aflatoxin contamination in both methods.

Estudio para el mejoramiento de la planta procesadora de maíces Algrano

La planta procesadora de maíces Algrano, se encuentra realizando los procesos de transformación del maíz de forma artesanal, es decir con maquinaria anticuada, falta de productividad, procesos no sistémicos, tiempos y movimientos ineficientes, y calidad de los productos de competitividad media. Es por esto que surge la necesidad de realizar un estudio de mejoramiento, mediante tres escenarios: tecnificación de la planta, aumento de turnos laborales y trabajo con horas variables, con el fin de evaluar cuál de las anteriores estrategias es la que se ajusta más para el mejoramiento de las falencias ya nombradas. Cumpliendo así con el objetivo de sus propietarios de estar a un nivel competitivo y sostenible en el mercado. Teniendo en cuenta información del sector agroindustrial de Colombia el cual indica que la producción de maíz así como la demanda en Colombia cada vez es mayor. Y que la apertura económica exige un alto nivel de competitividad.

Search for Salmonella spp. in ostrich productive chain of Brazilian southeast region

We analyzed ostriches from an equipped farm located in the Brazilian southeast region for the presence of Salmonella spp. This bacterium was investigated in 80 samples of ostrich droppings, 90 eggs, 30 samples of feed and 30 samples of droppings from rodents. Additionally, at slaughter-house this bacterium was investigated in droppings, caecal content, spleen, liver and carcasses from 90 slaughtered ostriches from the studied farm. Also, blood serum of those animals were harvested and submitted to serum plate agglutination using commercial Salmonella Pullorum antigen. No Salmonella spp. was detected in any eggs, caecal content, liver, spleen, carcass and droppings from ostriches and rodents. However, Salmonella Javiana and Salmonella enterica subsp. enterica 4, 12: i:- were isolated from some samples of feed. The serologic test was negative for all samples. Good sanitary farming management and the application of HACCP principles and GMP during the slaughtering process could explain the absence of Salmonella spp. in the tested samples.

Influência da soma térmica e da chuva durante o desenvolvimento de laranjas-'Valência' e 'Natal' na relação entre sólidos solúveis e acidez e no índice tecnológico do suco

Este trabalho foi realizado com o objetivo de conhecer a influência que algumas variáveis meteorológicas exercem na razão entre sólidos solúveis totais e acidez total titulável (ratio) e no índice tecnológico dos frutos da primeira florada das laranjeiras-'Natal' e 'Valência', na região de Bebedouro-SP, mediante a utilização de métodos estatísticos de regressão. Foram utilizados dados de amostragens de rotina para o processamento industrial durante 4 anos, os quais permitiram desenvolver equações de regressão linear e quadrática, com a soma térmica (graus-dia) como variável independente, e de regressão múltipla, utilizando graus-dia e chuva como variáveis independentes. A equação de melhor ajuste para o índice tecnológico foi a quadrática, enquanto para o ratio a equação linear apresentou o melhor ajuste. A temperatura do ar, representada por graus-dia, foi a variável que exerceu maior influência nos indicadores de qualidade dos frutos.