995 resultados para planting time
Resumo:
The seed size used for seeding has caused doubts among soybean producers. The study aimed to determine whether there may be differences between seed size with respect to depth of fertilizer deposition. The field experiment was conducted at the Experimental Area UTFPR Campus Pato Branco, using a precision seeder for direct seeding. The design was a randomized blocks, with five repetitions. The treatments were composed by the combination of two seed sizes (large seed with 6,5 mm and 5,5 mm with small seed) and two fertilizer deposition depths in relation to the seed (fertilizer near the seed with about 3 cm away and fertilizer distant from the seeds with about 10 cm). Data were subjected to analysis of variance. When the test value F was significant at 5% probability was applied to the Duncan test for comparison of means. The shallower depth of fertilizer deposition provided larger number of pods per plant and increased number of grains per plant. Already the largest depth of fertilizer deposition provided greater plant height at 30 days after sowing and R2 stage, greater ground area mobilized, higher plant population in all periods, greater depth of deposition of seeds and a higher rate of emergency speed.
Resumo:
Dissertação (mestrado)—Universidade de Brasília, Faculdade de Agronomia e Medicina Veterinária, Programa de Pós-Graduação em Agronomia, 2016.
Resumo:
RESUMO: Com o objetivo de avaliar a produção e distribuição da biomassa da parte aérea de diferentes genótipos de pinhão-manso no semiárido brasileiro, foi implantado um experimento na Fazenda Gabriela, localizada no município de Santa Maria da Boa Vista, Pernambuco. O delineamento experimental adotado foi em blocos casualizados, com dez tratamentos (genótipos de pinhão-manso) e três repetições, em parcelas lineares de seis plantas, com bordadura simples e espaçamento de 3,0 x 2,0 m. Foram aplicadas uma adubação correspondente a 150 g de NPK (06:24:12) por cova no plantio e duas adubações de cobertura com 150 g.planta-1 de NPK (10:10:10) aos seis e aos doze meses de idade. As plantas foram irrigadas semanalmente por gotejamento com uma aplicação média de 20 litros de água por planta durante o período de estiagem da região. Aos 24 meses de idade, foi medida a altura total das plantas, o diâmetro médio das bifurcações a 1,30 m da superfície do solo e o número de bifurcações a 0,5 m de altura. Foram feitas 26 colheitas semanais de frutos/sementes. Os frutos foram colhidos maduros, antes de sua queda ao chão, durante sete meses. Os genótipos apresentaram elevada uniformidade agronômica, exceto para a variável número de bifurcações, onde o genótipo 1701 foi superior aos genótipos 1501, 1602, 1703 e 1601. A produção de biomassa dos genótipos em condições irrigadas no semiárido é elevada e a distribuição da biomassa dos genótipos nos diferentes componentes seguiu a ordem decrescente: raiz>frutos>galhos grossos>folhas>casca>galhos finos. ABSTRACT: In order to assess production and distribution of biomass shoots of different genotypes of Jatropha curcas under irrigation in the semiarid region of Pernambuco, Brazil, an experiment was established in Gabriela Farm, in the municipality of Santa Maria da Boa Vista-PE. The experimental design was randomized blocks with ten treatments (genotypes of Jatropha curcas), and three replications in row plots of six plants, with a single border and spacing of 3.0 x 2.0 m. Plants were fertilized with 150 g of NPK (06:24:12) at planting time, and a topdressing with 150 g.planta-1 NPK (10:10:10) applied at six and twelve months of age. The plants were irrigated weekly using a dripping system with an average water application of 20 l.plant-1 during the dry period of the region. At 24 months of age, the overall height of the plants, the average diameter of bifurcations at 1.30m from the soil level and the number of bifurcations at 0.5 m of height were evaluated. Twenty six fruit/ seed harvests were done weekly. Fruits were harvested ripe, before falling on the ground, for seven months. To determine dry biomass, the plants were cut at 0.30 m from soil level. The genotypes showed high agronomic uniformity, except for the variable number of bifurcations, where the genotype 1701 was superior to the genotypes 1501, 1602, 1703 and 1601. Biomass production of genotypes in irrigated conditions in the semiarid region is high and the distribution of biomass followed the decreasing order: root>fruit>thick branches>leaves>bark>thin branches.
Resumo:
The effect of time of planting and plant size on the performance of ‘Festival’ and ‘Florida Fortuna’ strawberry (Fragaria ×ananassa) plants was studied at Nambour in southeastern Queensland, Australia, over 2 years. The main objective of the work was to determine whether small plants yielded proportionally less than large plants as planting was delayed. First, bare-rooted transplants of ‘Festival’ were divided into small (crown diameters ranging from 6 to 10 mm) or large plants (10 to 17 mm) and planted in late March, mid-April, or late April. Second, transplants of ‘Florida Fortuna’ were divided into small (5 to 8 mm) or large plants (8 to 17 mm) and planted in early April, mid-April, or early May. The early planting for each cultivar corresponded with the time that the transplants are first available from commercial strawberry nurseries. Yields were generally greater in plants planted in late March/early April compared with plants planted later. Differences in yield between the small and large plants were consistent across the different times of planting, with the small plants always having lower yields. Small transplants are an issue for the productivity of strawberry fields in this environment whether they are planted early or late. Producers should consider paying a premium for large transplants delivered early in the season.
Resumo:
The objective of this research was to study the effects of P fertilizers applied at time of planting on lychees' nutritional status and on plant growth. The treatments consisted of five doses of P: zero, 50, 100, 200, and 300 g of P2O5 per plant, furnished by triple superphosphate. Plant diameter was evaluated during two years and the plants' nutritional status on the second year. The second year foliar levels of macro and micronutrients (with the exception of Zn) were increased by the P fertilizer. The orchard's initial development, especially during the second year, was also influenced by the fertilizer. The P doses of 164 and 158 g of P2O5 per plant resulted in the largest plant diameter after the first and the second year, respectively. These doses were found to be associated with a foliar P level of <1.4 g kg-1. © 2012 Renato de Mello Prado et al.
Resumo:
Plant tissue culture has been used for a number of years to produce micropropagated strawberry plants for planting into runner growing beds in the Stanthorpe (Queensland) and Bothwell (Tasmania) regions. This process has allowed the rapid release of new cultivars from the LAWS (Late Autumn, Winter, Spring) breeding program into the current runner production system. Micro-propagation in vitro allows plants to be produced during the autumn and winter months, when mother plants would normally be in a fruit production phase in the field in Queensland. The plants produced are of a high health status when they are planted. The subsequent arrival and build up of various diseases in the runner fields are closely monitored. Using tissue culture for the first generation reduces the time the plants spend in the field by twelve months, reducing disease incidence. To date, any disease outbreak has been successfully managed using early detection and rapid response methods.
Resumo:
Crop models for herbaceous ornamental species typically include functions for temperature and photoperiod responses, but very few incorporate vernalization, which is a requirement of many traditional crops. This study investigated the development of floriculture crop models, which describe temperature responses, plus photoperiod or vernalization requirements, using Australian native ephemerals Brunonia australis and Calandrinia sp. A novel approach involved the use of a field crop modelling tool, DEVEL2. This optimization program estimates the parameters of selected functions within the development rate models using an iterative process that minimizes sum of squares residual between estimated and observed days for the phenological event. Parameter profiling and jack-knifing are included in DEVEL2 to remove bias from parameter estimates and introduce rigour into the parameter selection process. Development rate of B. australis from planting to first visible floral bud (VFB) was predicted using a multiplicative approach with a curvilinear function to describe temperature responses and a broken linear function to explain photoperiod responses. A similar model was used to describe the development rate of Calandrinia sp., except the photoperiod function was replaced with an exponential vernalization function, which explained a facultative cold requirement and included a coefficient for determining the vernalization ceiling temperature. Temperature was the main environmental factor influencing development rate for VFB to anthesis of both species and was predicted using a linear model. The phenology models for B. australis and Calandrinia sp. described development rate from planting to VFB and from VFB to anthesis in response to temperature and photoperiod or vernalization and may assist modelling efforts of other herbaceous ornamental plants. In addition to crop management, the vernalization function could be used to identify plant communities most at risk from predicted increases in temperature due to global warming.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
The aim of this work was to present organizational models for optimizing the reduction of crop residue generated by the sugarcane culture. The first model consisted of the selection of varieties of sugarcane to be planted meeting the mill requirements and, at the same time, to minimize the quantity of residue produced. The second model discussed the use of residue to produce energy. This is related to the selection of variety and quantity to be planted, in order to meet the requirements of the mill, to reduce the quantity of residue, and to maximize as much as possible the energy production. The use of linear programming was proposed. The two models presented similar results in this study, and both may be used to define the varieties and areas to be cultivated. (C) 2001 Published by Elsevier B.V. Ltd.
Resumo:
Growth effects of cultivation on soil, sand and commercial substrate, on summer and winter time, of 'Bonus #2', 'Don Carlo's and 'Hy Mark' were assessed. The experiments were conducted in a greenhouse of FCAV-UNESP, in Jaboticabal- SP, Brazil, 21° 15' 22 S, 48° 18'58 W, and an altitude of 595 m, comprising the period from November '99 to April 2000 (Summer), and from July to November 2000 (Winter). On soil cultivation, chemical nutrients were used, and the plants received drip irrigation. On sand, fertigation with recirculation of the nutrient solution were used, and slabs and fertigation with non circulating nutrient solution was used with commercial substrate. 'Bonus #2', grown on sand and in the summer season had improved plant height, internodes length, stem diameter, leaf area and dry matter of shoots and roots. 'Hy Mark', when cultivated on commercial substrate had lower growth. During winter season, the growth was slower.
Resumo:
The sugarcane mechanized planting is becoming increasingly widespread in Brazil due to a higher operability and better working conditions offered to workers compared to other types of planting. Studies related to this topic are insufficient or scarce in Brazil. In this context, the aim of this study was to evaluate the operation quality of sugarcane mechanized planting in two operation shifts, by means of statistical process control. The mechanized planting was held on March 2012 and statistical design was completely randomized with two treatments, totaling 40 replications for the day shift and 40 replications for the night shift. The variables evaluated were: speed, engine rotation, engine oil pressure, water temperature of the engine, effective field capacity and the time consumption hourly and effective fuel. The use of statistical control charts showed that random intrinsic do not cause this process. The tractor alignment error showed outliers in the day and night shifts operations, indicating a possible delay in receiving the signal. The water temperature of the engine and the effective fuel consumption showed lower variability in nighttime operation with average values of 81°C and 22.66 L ha-1, respectively. The hourly fuel consumption had greater variability and consequently lower quality during the night of the operation, with an average consumption of 25.46 L h-1 while the day shift showed 26.86 L h-1.
Resumo:
"Reprinted for the first time since the edition dated 1652, from the copy now owned by Mrs. Rosetta E. Clarkson."--T.p. verso.
Resumo:
This study aims at exploring the potential impact of forest protection intervention on rural households’ private fuel tree planting in Chiro district of eastern Ethiopia. The study results revealed a robust and significant positive impact of the intervention on farmers’ decisions to produce private household energy by growing fuel trees on their farm. As participation in private fuel tree planting is not random, the study confronts a methodological issue in investigating the causal effect of forest protection intervention on rural farm households’ private fuel tree planting through non-parametric propensity score matching (PSM) method. The protection intervention on average has increased fuel tree planting by 503 (580.6%) compared to open access areas and indirectly contributed to slowing down the loss of biodiversity in the area. Land cover/use is a dynamic phenomenon that changes with time and space due to anthropogenic pressure and development. Forest cover and land use changes in Chiro District, Ethiopia over a period of 40 years was studied using remotely sensed data. Multi temporal satellite data of Landsat was used to map and monitor forest cover and land use changes occurred during three point of time of 1972,1986 and 2012. A pixel base supervised image classification was used to map land use land cover classes for maps of both time set. The result of change detection analysis revealed that the area has shown a remarkable land cover/land use changes in general and forest cover change in particular. Specifically, the dense forest cover land declined from 235 ha in 1972 to 51 ha in 1986. However, government interventions in forest protection in 1989 have slowed down the drastic change of dense forest cover loss around the protected area through reclaiming 1,300 hectares of deforested land through reforestation program up to 2012.
Resumo:
Diffusion equations that use time fractional derivatives are attractive because they describe a wealth of problems involving non-Markovian Random walks. The time fractional diffusion equation (TFDE) is obtained from the standard diffusion equation by replacing the first-order time derivative with a fractional derivative of order α ∈ (0, 1). Developing numerical methods for solving fractional partial differential equations is a new research field and the theoretical analysis of the numerical methods associated with them is not fully developed. In this paper an explicit conservative difference approximation (ECDA) for TFDE is proposed. We give a detailed analysis for this ECDA and generate discrete models of random walk suitable for simulating random variables whose spatial probability density evolves in time according to this fractional diffusion equation. The stability and convergence of the ECDA for TFDE in a bounded domain are discussed. Finally, some numerical examples are presented to show the application of the present technique.