Methods for assessment of pre-harvest sprouting in wheat cultivars

The objective of this work was to test methods for pre-harvest sprouting assessment in wheat cultivars. Fourteen wheat cultivars were grown in Londrina and Ponta Grossa municipalities, Paraná state, Brazil. They were sampled at 10 and 17 days after physiological maturity and evaluated using the methods of germination by rainfall simulation (in a greenhouse), in-ear grain sprouting, and grains removed from the ears. The in-ear grain sprouting method allowed the differentiation of cultivars, but showed different resistance levels from the available description of cultivars. The sprouting of grain removed from the ears did not allow a reliable distinction of data on germination in any harvest date or location. The method of rainfall simulation is the most suitable for the assessment of cultivars as to pre-harvest sprouting, regardless of the sampling date and evaluated location.

DIETARY FIBRE CONTENT, PHENOLIC COMPOUNDS AND ANTIOXIDANT ACTIVITY IN SOURSOPS (Annona muricata L.)

ABSTRACT Healthy eating is associated with the consumption of fruits, which are notable for their beneficial effects on human health. The aim of this study was to evaluate the proximate composition, composition of fibers and components with antioxidant activity in soursops varieties Crioula, Lisa and Morada of physiological maturity (PM) and mature (M). The protein, lipid and moisture contents did not differ between soursop varieties, but the ash contents were higher in the Morada-PM (0.56%±0.03) and the Morada-M (0.82%±0.10) varieties. The Crioula-M variety showed higher levels of total dietary fibre (5.76%±0.12). The Lisa-M variety showed higher levels of insoluble dietary fibre (4.46%±0.00). The Lisa-M variety also showed a higher level of phenolic compounds (284.25 mg gallic acid/100 g of soursop pulp), differing significantly (p <0.05) from the Crioula-PM soursop (154.40 mg of gallic acid/100 g of soursop pulp). Under the DPPH• system, the soursops that showed highest antioxidant activity were the Crioula-M (EC50 of 156.40 g.g DPPH-1) and the Crioula-PM (EC50 of 162.41 g.g DPPH-1), which differed significantly from the Morada soursops. The results suggest that the consumption of soursops is useful for increasing concentrations of bioactive compounds and dietary fibre.

Critical-point model to estimate yield loss caused by Asian soybean rust

ABSTRACTA model to estimate yield loss caused by Asian soybean rust (ASR) (Phakopsora pachyrhizi) was developed by collecting data from field experiments during the growing seasons 2009/10 and 2010/11, in Passo Fundo, RS. The disease intensity gradient, evaluated in the phenological stages R5.3, R5.4 and R5.5 based on leaflet incidence (LI) and number of uredinium and lesions/cm2, was generated by applying azoxystrobin 60 g a.i/ha + cyproconazole 24 g a.i/ha + 0.5% of the adjuvant Nimbus. The first application occurred when LI = 25% and the remaining ones at 10, 15, 20 and 25-day intervals. Harvest occurred at physiological maturity and was followed by grain drying and cleaning. Regression analysis between the grain yield and the disease intensity assessment criteria generated 56 linear equations of the yield loss function. The greatest loss was observed in the earliest growth stage, and yield loss coefficients ranged from 3.41 to 9.02 kg/ha for each 1% LI for leaflet incidence, from 13.34 to 127.4 kg/ha/1 lesion/cm2 for lesion density and from 5.53 to 110.0 kg/ha/1 uredinium/cm2 for uredinium density.

Effect of high hydrostatic pressure on antioxidant content of 'Ataulfo' mango during postharvest maturation

The objective of this study was to evaluate the effect of pressurization on the concentration of some antioxidant compounds and the antiradical efficiency during the ripening process of 'Ataulfo' mango. The fruits at physiological maturity stage were pressurized at 15, 30, or 60 MPa for 10 or 20 min. Control fruits were not pressurized. The fruits were stored at 25 °C and changes in the concentration of ascorbic acid, total phenols, total flavonoids, total carotenoids, and antiradical efficiency were evaluated. It was demonstrated that in 'Ataulfo' mango high hydrostatic pressure treatments at 60 and 30 MPa for 20 minutes induced the synthesis of ascorbic acid during storage maybe as a consequence of physiological changes and possible structural modification of the cells, while the fruits pressurized at 15 MPa showed no effect on this parameter. On the other hand, the use of 15 MPa for 10 minutes increased the synthesis of phenols, flavonoids, carotenoids, and antiradical efficiency in 'Ataulfo' mango compared to that of the control fruit. In conclusion, this behavior seemed to be due to the low hydrostatic pressure treatments (15 Mpa), which stimulated the synthesis of antioxidants in the mango fruit and ripening was not inhibited.

Seed moisture range in a soybean plant

It is common to see in any soybean plant that seeds reach maturity at different times. Thus the objective of the present study was to determine the magnitude of the seed moisture range at different stages of maturation in a soybean plant. The field study was conducted in a tropical region in the state of Mato Grosso - Brazil, established with foundation seeds of the MTBR-45 cultivar, and at flowering, 100 plants were marked at the same maturity stage. Harvesting began when seeds still were at high moisture content (MC). At each of eight harvesting times, during 16 days, all pods from two plants were harvested and the seeds from each pod were hand threshed individually and determined the moisture content . The results revealed that there is a great distribution of seed MC in a soybean plant, where at physiological maturity, the magnitude can reach more than 30 percentage points. Also, even with an average MC below 12%, there were more than 20 % of the seeds with MC above 13% and some seeds at this point had been waiting to be harvested for more than a week. The following conclusions and/or recommendations can be taken: 1- The great seed MC range in a soybean seed lot harvested at field maturity leads to the presence of seeds susceptible to mechanical damage and with MC unsafe for adequate storage; 2 - It is recommended that harvesting be accomplished when the seeds are in the 15-18% MC range, in order to minimize field deterioration and the percentage of seeds with high MC; 3- Drying is recommended, even when soybean seeds are in their average MC safe for storage.

Evaluation of lignin content of soybean seed coat stored in a controlled environment

Breeding soybean for high seed quality is an important approach for developing cultivars for tropical regions, and the lignin content in the seed coat is one of the screening parameters for this trait. Considering that many breeding lines are evaluated in each growing season using the presently recommended method for lignin determination, a long period is required for the evaluation of the whole breeding program. This time limitation may influence lignin content assessment, if lignin is degraded during storage. This research reported was designed to determine whether lignin was degraded in the seed coat of soybean seed cultivars stored for one year in a controlled environment (10°C temperature and 50% air relative humidity). Seeds of 12 selected soybean cultivars that had a range in seed coat lignin content were evaluated. Seeds were hand harvested just after physiological maturity and evaluated for seed coat lignin content at harvest and after one year of storage in a cold room (10°C and 50% RH). The lignin content in seed coats differed significantly among cultivars in both analyses, but for both results the sequence of cultivar classification and the lignin content values of each cultivar did not change. A regression analysis of lignin content at harvest and after one year of storage indicated a direct relationship between both lignin determinations suggesting no differences between the lignin content of each cultivar due to prolonged storage (r² = 0.98***). This indicates that the lignin determination in the soybean seed coat can be performed over a long time period without any bias due to change in its content.

Respiratory activity for the differentiation of vigor on soybean seeds lots

Currently, the highest interest with respect to the assessment of seed physiological quality is to obtain reliable results in a relatively short period of time. This initiative allows for prompt decisions during different phases of seed production primarily after physiological maturity. This research was performed to verify the efficiency and rapidity of the method of Pettenkofer to determine the respiratory activity and to differentiate vigor levels of soybean seed lots. Three lots of soybean seeds cv. 8000 were used. Seed performance was determined by respiratory activity, compared to the following tests: standard germination, germination first count, electrical conductivity, seedling emergence, seedling shoot and root length and total dry mass. Results ranked seed lots according to defferences in physiological quality. Seed imbibition and conditioning period in Pettenkofer's equipment were enough to detect differences in vigor among seed lots, showing that the determination of the respiratory activity is a promising procedure to identify differences in vigor levels among soybean seed lots.

Optimization of Processing Technology for Commercial Drying of Bananas (Matooke)

Summary - Cooking banana is one of the most important crops in Uganda; it is a staple food and source of household income in rural areas. The most common cooking banana is locally called matooke, a Musa sp triploid acuminate genome group (AAA-EAHB). It is perishable and traded in fresh form leading to very high postharvest losses (22-45%). This is attributed to: non-uniform level of harvest maturity, poor handling, bulk transportation and lack of value addition/processing technologies, which are currently the main challenges for trade and export, and diversified utilization of matooke. Drying is one of the oldest technologies employed in processing of agricultural produce. A lot of research has been carried out on drying of fruits and vegetables, but little information is available on matooke. Drying of matooke and milling it to flour extends its shelf-life is an important means to overcome the above challenges. Raw matooke flour is a generic flour developed to improve shelf stability of the fruit and to find alternative uses. It is rich in starch (80 - 85%db) and subsequently has a high potential as a calorie resource base. It possesses good properties for both food and non-food industrial use. Some effort has been done to commercialize the processing of matooke but there is still limited information on its processing into flour. It was imperative to carry out an in-depth study to bridge the following gaps: lack of accurate information on the maturity window within which matooke for processing into flour can be harvested leading to non-uniform quality of matooke flour; there is no information on moisture sorption isotherm for matooke from which the minimum equilibrium moisture content in relation to temperature and relative humidity is obtainable, below which the dry matooke would be microbiologically shelf-stable; and lack of information on drying behavior of matooke and standardized processing parameters for matooke in relation to physicochemical properties of the flour. The main objective of the study was to establish the optimum harvest maturity window and optimize the processing parameters for obtaining standardized microbiologically shelf-stable matooke flour with good starch quality attributes. This research was designed to: i) establish the optimum maturity harvest window within which matooke can be harvested to produce a consistent quality of matooke flour, ii) establish the sorption isotherms for matooke, iii) establish the effect of process parameters on drying characteristics of matooke, iv) optimize the drying process parameters for matooke, v) validate the models of maturity and optimum process parameters and vi) standardize process parameters for commercial processing of matooke. Samples were obtained from a banana plantation at Presidential Initiative on Banana Industrial Development (PIBID), Technology Business Incubation Center (TBI) at Nyaruzunga – Bushenyi in Western Uganda. A completely randomized design (CRD) was employed in selecting the banana stools from which samples for the experiments were picked. The cultivar Mbwazirume which is soft cooking and commonly grown in Bushenyi was selected for the study. The static gravitation method recommended by COST 90 Project (Wolf et al., 1985), was used for determination of moisture sorption isotherms. A research dryer developed for this research. All experiments were carried out in laboratories at TBI. The physiological maturity of matooke cv. mbwazirume at Bushenyi is 21 weeks. The optimum harvest maturity window for commercial processing of matooke flour (Raw Tooke Flour - RTF) at Bushenyi is between 15-21 weeks. The finger weight model is recommended for farmers to estimate harvest maturity for matooke and the combined model of finger weight and pulp peel ratio is recommended for commercial processors. Matooke isotherms exhibited type II curve behavior which is characteristic of foodstuffs. The GAB model best described all the adsorption and desorption moisture isotherms. For commercial processing of matooke, in order to obtain a microbiologically shelf-stable dry product. It is recommended to dry it to moisture content below or equal to 10% (wb). The hysteresis phenomenon was exhibited by the moisture sorption isotherms for matooke. The isoteric heat of sorption for both adsorptions and desorption isotherms increased with decreased moisture content. The total isosteric heat of sorption for matooke: adsorption isotherm ranged from 4,586 – 2,386 kJ/kg and desorption isotherm from 18,194– 2,391 kJ/kg for equilibrium moisture content from 0.3 – 0.01 (db) respectively. The minimum energy required for drying matooke from 80 – 10% (wb) is 8,124 kJ/kg of water removed. Implying that the minimum energy required for drying of 1 kg of fresh matooke from 80 - 10% (wb) is 5,793 kJ. The drying of matooke takes place in three steps: the warm-up and the two falling rate periods. The drying rate constant for all processing parameters ranged from 5,793 kJ and effective diffusivity ranged from 1.5E-10 - 8.27E-10 m2/s. The activation energy (Ea) for matooke was 16.3kJ/mol (1,605 kJ/kg). Comparing the activation energy (Ea) with the net isosteric heat of sorption for desorption isotherm (qst) (1,297.62) at 0.1 (kg water/kg dry matter), indicated that Ea was higher than qst suggesting that moisture molecules travel in liquid form in matooke slices. The total color difference (ΔE*) between the fresh and dry samples, was lowest for effect of thickness of 7 mm, followed by air velocity of 6 m/s, and then drying air temperature at 70˚C. The drying system controlled by set surface product temperature, reduced the drying time by 50% compared to that of a drying system controlled by set air drying temperature. The processing parameters did not have a significant effect on physicochemical and quality attributes, suggesting that any drying air temperature can be used in the initial stages of drying as long as the product temperature does not exceed gelatinization temperature of matooke (72˚C). The optimum processing parameters for single-layer drying of matooke are: thickness = 3 mm, air temperatures 70˚C, dew point temperature 18˚C and air velocity 6 m/s overflow mode. From practical point of view it is recommended that for commercial processing of matooke, to employ multi-layer drying of loading capacity equal or less than 7 kg/m², thickness 3 mm, air temperatures 70˚C, dew point temperature 18˚C and air velocity 6 m/s overflow mode.

Aspects of isolation underpinning mitotic behaviour in lupin protoplasts

This study reports on the influence of critical isolation factors on the subsequent culture of protoplasts of Lupinus albus L. Protoplasts were isolated from in vitro seedling cotyledons of five early maturing accessions in which protoplast yields and division frequencies appeared to be correlated as a high protoplast yield corresponded with a high division frequency. The overall difference among the accessions for mitosis was non- significant, although the highest yield and division frequency were observed in accession LA132, with Alban giving a significantly lower level. Accession Lucrop produced the lowest number of protoplasts, all of which collapsed during culture. Of the enzyme types used for tissue maceration, Pectolyase Y23, was significantly inferior to Macerase in terms of giving way to mitosis. The extent of division in Macerase- isolated protoplast population was 266% higher than that in the Pectolyase Y23- isolated one. The physiological maturity level of the explant, expressed in terms of developmental age, was optimal when 14 - 18- day- old seedling cotyledons were used for protoplast production and culture, rather than more mature ones, despite higher protoplast yields in the latter. On K8p medium, the protoplast division frequency was 129% greater when 18- day- old seedling cotyledons were used, than that with any other treatment. This work on protoplast culture of the potentially important lupin species, which is a pulse rich in dietary protein, oil and fibre, allows a further understanding of the biology, with an aim to advance lupin biotechnology.

Biology of Grapsus grapsus (LINNAEUS, 1758) (Brachyura, Grapsidae) in the Saint Peter and Saint Paul Archipelago, Equatorial Atlantic Ocean

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Aplicação, em pré-colheita, de dessecante em duas cultivares de soja (Glycine max (L. ) Merril) III - Efeitos sobre a composição química (proteína, óleo e cinzas) e resíduos nas sementes

A aplicação pré-colheita do dessecante paraquat, quando real izada a partir das primeiras épocas (75 e 72 dias após o início do florescimento, para a Santa Rosa e IAC-2, respectivamente) não modificaram os teores com que ocorreram normalmente, proteína, extrato etéreo e cinzas nos grãos. As análises do resíduo de paraquat nos grãos colhidos, mostram claramente que não se deve recomendar tal prática às lavouras de soja, cujo objetivo final seja o fornecimento de grãos para a alimentação humana e animal. Entretanto pode ser indicada, sem maiores restrições, àquelas cuja finalidade é a produção de sementes comerciais.

Efeito do manejo cultural e químico na incidência e severidade da mancha-preta dos citros

A citricultura apresenta vários problemas fitossanitários, dentre os quais a mancha-preta dos citros (Guignardia citricarpa). O controle desta doença baseia-se no emprego de práticas culturais e no uso de fungicidas. Avaliou-se o efeito do manejo do mato em conjunto com o químico no controle da doença. Os experimentos foram instalados em pomares de laranjeiras-doces, nos municípios de Matão, Rio Claro e Mogi Guaçu, no Estado de São Paulo. No manejo do mato, comparou-se o uso isolado de roçadeira ecológica com o conjugado rastelo mecânico e trincha, aos 35 dias, após 2/3 de pétalas caídas. No controle químico, foram realizadas duas pulverizações com fungicida protetor e de 2 a 5 pulverizações da mistura de produto sistêmico com protetor, aos 45 dias, após 2/3 de pétalas caídas, em intervalos de aplicação de 35 dias. em todas as aplicações, foi adicionado óleo mineral emulsionável (0,25%). Avaliou-se a área abaixo da curva de progresso da incidência e severidade da doença, com os dados de cinco avaliações realizadas quinzenalmente, a partir da maturidade fisiológica dos frutos. em todas as áreas, o uso do controle químico, associado com o manejo do mato, reduziu a intensidade da doença.

Maturação fisiológica de sementes de sabiá

O objetivo desta pesquisa foi estudar o processo de maturação de sementes de sabiá (Mimosa caesalpiniifolia Benth.). Foram realizadas dezesseis colheitas semanais de frutos e sementes de árvores, no município de Areia - Paraiba, no período de agosto a novembro de 2001. As colheitas iniciaram-se aos 105 dias e estenderam-se até os 210 dias após a antese. Foram avaliadas as dimensões, o teor de água e a massa fresca e seca de frutos e sementes, bem como a germinação e o vigor (primeira contagem de germinação, comprimento e massa fresca e seca das plântulas). Concluiu-se que a maturidade fisiológica das sementes de sabiá ocorre entre 154 e168 dias após a antese, podendo a colheita ser realizada até 189 dias após a antese, uma vez que a partir deste período ocorre elevada perda de frutos e sementes devido à dispersão natural.

Qualidade fisiológica de sementes de seringueira (Hevea brasiliensis Muell. Arg.), tratadas com benlate durante o armazenamento

A ocorrência de um período relativamente frio e seco, imediatamente após o período de coleta de sementes de seringueira - Hevea brasiliensis Muell. Arg. (março-abril), levou à realização do presente trabalho com o objetivo de encontrar condições adequadas de preservação da qualidade fisiológica das sementes. Assim, estudou-se a qualidade fisiológica de sementes, tratadas com Benlate (0,1%), e armazenadas em sacos de polietileno transparente, por períodos de 0 a 5 meses, sob condições ambientais de laboratório. Para a avaliação da qualidade fisiológica das sementes, determinou-se a germinação e o vigor através do índice de velocidade de emergência (IVE) e do comprimento da parte aérea das plântulas (CPA), em 1987 e 1988. A germinação e o IVE foram obtidos sob duas condições ambientais diferentes, ambiente do laboratório e em germinador a 30°C. O tratamento fungicida utilizado não exerceu efeito significativo na preservação das sementes. A germinação, o IVE e o CPA reduziram-se com o prolongamento do armazenamento. Os valores da germinação foram baixo desde o início dos trabalhos, o que pode ser atribuído ao teor de água inicial, que estava abaixo de 30%. O teste de germinação de sementes dessa espécie pode ser feito utilizando-se areia como substrato, a 30°C e com a contagem final aos 20 dias após a instalação do teste.

Desenvolvimento de grãos e produção de fitomassa do girassol em função de adubações boratadas

Sunflower crop is a good option to no-tillage system; however, it is sensible to low B availability, what is common in tropical soils. The objective of this study was to evaluate the crop development, grain yield and grain size as affected by B fertilizer doses applied in the sowing and by leaf application. The experiment was conducted in controlled conditions, with four Borax doses (0; 1; 2 e 3 kg B ha(-1)) in the sowing interacting with four Boric Acid doses (0; 0,5; 1 e 2 kg B ha(-1)) by leaf application. The plants were managed until grain physiological maturity, when stems, leaves and capitula were sampled, besides the counting and weighing of two grain classes separated by size. The B fertilizer applied in the sowing lines increased total dry matter phytomass and grain yield. However, when interacting with high doses of B by leaf application, these values decreased. Grain size was increased with leaf fertilization, when B was not applied in the soil or with only 1 kg B ha(-1) in the sowing line. on the other hand, when B was applied from 2 to 3 kg ha(-1) in the crop sowing, high doses of leaf fertilizer affected grain filling.