Parametric combustion modeling for ethanol-gasoline fuelled spark ignition engines

Ethanol-gasoline fuel blends are increasingly being used in spark ignition (SI) engines due to continued growth in renewable fuels as part of a growing renewable portfolio standard (RPS). This leads to the need for a simple and accurate ethanol-gasoline blends combustion model that is applicable to one-dimensional engine simulation. A parametric combustion model has been developed, integrated into an engine simulation tool, and validated using SI engine experimental data. The parametric combustion model was built inside a user compound in GT-Power. In this model, selected burn durations were computed using correlations as functions of physically based non-dimensional groups that have been developed using the experimental engine database over a wide range of ethanol-gasoline blends, engine geometries, and operating conditions. A coefficient of variance (COV) of gross indicated mean effective pressure (IMEP) correlation was also added to the parametric combustion model. This correlation enables the cycle combustion variation modeling as a function of engine geometry and operating conditions. The computed burn durations were then used to fit single and double Wiebe functions. The single-Wiebe parametric combustion compound used the least squares method to compute the single-Wiebe parameters, while the double-Wiebe parametric combustion compound used an analytical solution to compute the double-Wiebe parameters. These compounds were then integrated into the engine model in GT-Power through the multi-Wiebe combustion template in which the values of Wiebe parameters (single-Wiebe or double-Wiebe) were sensed via RLT-dependence. The parametric combustion models were validated by overlaying the simulated pressure trace from GT-Power on to experimentally measured pressure traces. A thermodynamic engine model was also developed to study the effect of fuel blends, engine geometries and operating conditions on both the burn durations and COV of gross IMEP simulation results.

Evaluation of 3-dimensional superimposition techniques on various skeletal structures of the head using surface models.

OBJECTIVES To test the applicability, accuracy, precision, and reproducibility of various 3D superimposition techniques for radiographic data, transformed to triangulated surface data. METHODS Five superimposition techniques (3P: three-point registration; AC: anterior cranial base; AC + F: anterior cranial base + foramen magnum; BZ: both zygomatic arches; 1Z: one zygomatic arch) were tested using eight pairs of pre-existing CT data (pre- and post-treatment). These were obtained from non-growing orthodontic patients treated with rapid maxillary expansion. All datasets were superimposed by three operators independently, who repeated the whole procedure one month later. Accuracy was assessed by the distance (D) between superimposed datasets on three form-stable anatomical areas, located on the anterior cranial base and the foramen magnum. Precision and reproducibility were assessed using the distances between models at four specific landmarks. Non parametric multivariate models and Bland-Altman difference plots were used for analyses. RESULTS There was no difference among operators or between time points on the accuracy of each superimposition technique (p>0.05). The AC + F technique was the most accurate (D<0.17 mm), as expected, followed by AC and BZ superimpositions that presented similar level of accuracy (D<0.5 mm). 3P and 1Z were the least accurate superimpositions (0.790.05), the detected structural changes differed significantly between different techniques (p<0.05). Bland-Altman difference plots showed that BZ superimposition was comparable to AC, though it presented slightly higher random error. CONCLUSIONS Superimposition of 3D datasets using surface models created from voxel data can provide accurate, precise, and reproducible results, offering also high efficiency and increased post-processing capabilities. In the present study population, the BZ superimposition was comparable to AC, with the added advantage of being applicable to scans with a smaller field of view.

A fuzzy decision tree-based duration model for Standard Yorùbá text-to-speech synthesis

In this paper, we present syllable-based duration modelling in the context of a prosody model for Standard Yorùbá (SY) text-to-speech (TTS) synthesis applications. Our prosody model is conceptualised around a modular holistic framework. This framework is implemented using the Relational Tree (R-Tree) techniques. An important feature of our R-Tree framework is its flexibility in that it facilitates the independent implementation of the different dimensions of prosody, i.e. duration, intonation, and intensity, using different techniques and their subsequent integration. We applied the Fuzzy Decision Tree (FDT) technique to model the duration dimension. In order to evaluate the effectiveness of FDT in duration modelling, we have also developed a Classification And Regression Tree (CART) based duration model using the same speech data. Each of these models was integrated into our R-Tree based prosody model. We performed both quantitative (i.e. Root Mean Square Error (RMSE) and Correlation (Corr)) and qualitative (i.e. intelligibility and naturalness) evaluations on the two duration models. The results show that CART models the training data more accurately than FDT. The FDT model, however, shows a better ability to extrapolate from the training data since it achieved a better accuracy for the test data set. Our qualitative evaluation results show that our FDT model produces synthesised speech that is perceived to be more natural than our CART model. In addition, we also observed that the expressiveness of FDT is much better than that of CART. That is because the representation in FDT is not restricted to a set of piece-wise or discrete constant approximation. We, therefore, conclude that the FDT approach is a practical approach for duration modelling in SY TTS applications. © 2006 Elsevier Ltd. All rights reserved.

Survival Extrapolation In The Presence Of Cause Specific Hazards.

Health economic evaluations require estimates of expected survival from patients receiving different interventions, often over a lifetime. However, data on the patients of interest are typically only available for a much shorter follow-up time, from randomised trials or cohorts. Previous work showed how to use general population mortality to improve extrapolations of the short-term data, assuming a constant additive or multiplicative effect on the hazards for all-cause mortality for study patients relative to the general population. A more plausible assumption may be a constant effect on the hazard for the specific cause of death targeted by the treatments. To address this problem, we use independent parametric survival models for cause-specific mortality among the general population. Because causes of death are unobserved for the patients of interest, a polyhazard model is used to express their all-cause mortality as a sum of latent cause-specific hazards. Assuming proportional cause-specific hazards between the general and study populations then allows us to extrapolate mortality of the patients of interest to the long term. A Bayesian framework is used to jointly model all sources of data. By simulation, we show that ignoring cause-specific hazards leads to biased estimates of mean survival when the proportion of deaths due to the cause of interest changes through time. The methods are applied to an evaluation of implantable cardioverter defibrillators for the prevention of sudden cardiac death among patients with cardiac arrhythmia. After accounting for cause-specific mortality, substantial differences are seen in estimates of life years gained from implantable cardioverter defibrillators.

Three-dimensional mapping of hippocampal anatomy in unmedicated and lithium-treated patients with bipolar disorder

Declarative memory impairments are common in patients with bipolar illness, suggesting underlying hippocampal pathology. However, hippocampal volume deficits are rarely observed in bipolar disorder. Here we used surface-based anatomic mapping to examine hippocampal anatomy in bipolar patients treated with lithium relative to matched control subjects and unmedicated patients with bipolar disorder. High-resolution brain magnetic resonance images were acquired from 33 patients with bipolar disorder ( 21 treated with lithium and 12 unmedicated), and 62 demographically matched healthy control subjects. Three-dimensional parametric mesh models were created from manual tracings of the hippocampal formation. Total hippocampal volume was significantly larger in lithium-treated bipolar patients compared with healthy controls (by 10.3%; p=0.001) and unmedicated bipolar patients ( by 13.9%; p=0.003). Statistical mapping results, confirmed by permutation testing, revealed localized deficits in the right hippocampus, in regions corresponding primarily to cornu ammonis vertical bar subfields, in unmedicated bipolar patients, as compared to both normal controls (p=0.01), and in lithium-treated bipolar patients (p=0.03). These findings demonstrate the sensitivity of these anatomic mapping methods for detecting subtle alterations in hippocampal structure in bipolar disorder. The observed reduction in subregions of the hippocampus in unmedicated bipolar patients suggests a possible neural correlate for memory deficits frequently reported in this illness. Moreover, increased hippocampal volume in lithium-treated bipolar patients may reflect postulated neurotrophic effects of this agent, a possibility warranting further study in longitudinal investigations.

On the length of bank-firm relationships: an empirical application to a major French bank

NIPE - WP 01/ 2016

Employment, turnover and career progress

The severe economic downturn that followed the Global Financial Crisis of 2007 was accompanied by major fluctuations in the labour market. During the Great Recession the rate of job destruction was such that, by 2013, active population was at levels of 1999; employment levels were at an historical minimum; and the unemployment rate soared to 17,5%. This chapter inspects the dynamics behind the aggregate fl uctuations in the labour market and studies the determinants of mobility within (promotions) and between fi rms, and whether these have changed during crisis, using Portuguese (LEED) data. During crisis women became more likely to make between- rm moves with short gaps of unemployment and less likely to find a new job after a long gap or to make a job-to-non-employment transition. More educated workers are less likely to experience between fi rm job mobility, both before and during crisis, and became less likely to make job-to-non-employment transitions during crisis. Young workers are the group that most suffered from crisis: they became less likely to make job-to-job transitions and their hazard of experiencing a transition into unemployment shoot up.

Descodificação do De re aedificatoria de Alberti: gramáticas de forma para a análise e geração de edifícios sagrados

Teses de Doutoramento em Arquitectura.

How binding are legal limits? Transitions from temporary to permanent work in Spain

This paper studies the duration pattern of xed-term contracts and the determinantsof their conversion into permanent ones in Spain, where the share of xed-termemployment is the highest in Europe. We estimate a duration model for temporaryemployment, with competing risks of terminating into permanent employment versusalternative states, and exible duration dependence. We nd that conversion rates aregenerally below 10%. Our estimated conversion rates roughly increase with tenure,with a pronounced spike at the legal limit, when there is no legal way to retain theworker on a temporary contract. We argue that estimated di¤erences in conversionrates across categories of workers can stem from di¤erences in worker outside optionsand thus the power to credibly threat to quit temporary jobs.

Le parcours en emploi des immigrantes sélectionnées au Québec : quelles différences avec leurs homologues masculins ?

L'Enquête rétrospective sur les travailleurs sélectionnés au Québec a permis d’analyser la relation formation-emploi des immigrantes — arrivées comme requérantes principales — et de jeter un regard sur le parcours en emploi de ces femmes, en comparaison avec leurs homologues masculins. Une attention particulière est mise sur l'effet de genre et de la région de provenance, ainsi que l'interaction entre ces deux variables. Des modèles semi-paramétriques de Cox mettent en exergue comment les caractéristiques individuelles, mais aussi les activités de formation dans la société d’accueil, affectent au fil du temps les risques relatifs d’obtenir un premier emploi correspondant à ses qualifications scolaires prémigratoires. Puis, des régressions linéaires font état des déterminants du salaire après deux ans sur le territoire. Les résultats montrent que l'accès à l'emploi qualifié n'est pas affecté différemment selon que l'immigrant soit un homme ou une femme. Des différences intragroupes apparaissent toutefois en fonction de la région de provenance, avec un net avantage pour les immigrants de l'Europe de l'Ouest et des États-Unis. L'accès au premier emploi (sans distinction pour les qualifications) et le salaire révèlent, quant à eux, des différences sur la base du genre, avec un désavantage pour les femmes. Chez ces dernières, l'insertion en emploi se fait de façon similaire entre les groupes régionaux, alors que les groupes d'hommes sont plus hétérogènes. D'ailleurs, certaines caractéristiques individuelles, comme la connaissance du français et la catégorie d'admission, affectent différemment les immigrants et les immigrantes dans l'accès au premier emploi.

Uso de modelos econométricos en aseguramiento de portafolios

El aseguramiento de portafolio trae consigo unos costos de transacción asociados que son reconocidos por la teoría financiera pero que no han sido objeto de estudio de muchas aproximaciones empíricas. Mediante modelos econométricos de series de tiempo se puede pronosticar el número de rebalanceos necesarios para mantener un portafolio asegurado, así como el tiempo que debe transcurrir entre cada uno de estos. Para tal fin se usan modelos de Datos de Cuenta de Poisson Autorregresivos (ACP) modificados para captar las características de la serie y modelos de Duración Autorregresivos (ACD). Los modelos capturan la autocorrelación de las series y pronostican adecuadamente el costo de transacción asociado a los rebalanceos.

Determinantes de la deserción universitaria en la Facultad de Economía de la Universidad del Rosario

Este trabajo analiza el problema de la deserción estudiantil en la Facultad de Economía de la Universidad del Rosario, a través del estudio de los factores individuales, académicos y socioeconómicos que implican el riesgo de desertar. Con este objetivo, se utiliza el análisis de modelos de duración. Específi camente, se estima un modelo de riesgo proporcional de tiempo discreto con y sin heterogeneidad observada (Prentice- Gloeckler, 1978 y Meyer, 1980). Los resultados muestran que los estudiantes de sexo masculino, la vinculación de los estudiantes al mercado laboral y los estudiantes provenientes de otras regiones, tienen el mayor riesgo de deserción. Además, la edad del estudiante incrementa el riesgo, sin embargo, su efecto decrece marginalmente al aumentar la edad. Palabras clave: deserción estudiantil, modelos de duración, riesgo proporcional. Clasifi cación JEL: C41, C13, I21.

Geostatistical radar-raingauge combination with nonparametric correlograms: methodological considerations and application in Switzerland

Modelling spatial covariance is an essential part of all geostatistical methods. Traditionally, parametric semivariogram models are fit from available data. More recently, it has been suggested to use nonparametric correlograms obtained from spatially complete data fields. Here, both estimation techniques are compared. Nonparametric correlograms are shown to have a substantial negative bias. Nonetheless, when combined with the sample variance of the spatial field under consideration, they yield an estimate of the semivariogram that is unbiased for small lag distances. This justifies the use of this estimation technique in geostatistical applications. Various formulations of geostatistical combination (Kriging) methods are used here for the construction of hourly precipitation grids for Switzerland based on data from a sparse realtime network of raingauges and from a spatially complete radar composite. Two variants of Ordinary Kriging (OK) are used to interpolate the sparse gauge observations. In both OK variants, the radar data are only used to determine the semivariogram model. One variant relies on a traditional parametric semivariogram estimate, whereas the other variant uses the nonparametric correlogram. The variants are tested for three cases and the impact of the semivariogram model on the Kriging prediction is illustrated. For the three test cases, the method using nonparametric correlograms performs equally well or better than the traditional method, and at the same time offers great practical advantages. Furthermore, two variants of Kriging with external drift (KED) are tested, both of which use the radar data to estimate nonparametric correlograms, and as the external drift variable. The first KED variant has been used previously for geostatistical radar-raingauge merging in Catalonia (Spain). The second variant is newly proposed here and is an extension of the first. Both variants are evaluated for the three test cases as well as an extended evaluation period. It is found that both methods yield merged fields of better quality than the original radar field or fields obtained by OK of gauge data. The newly suggested KED formulation is shown to be beneficial, in particular in mountainous regions where the quality of the Swiss radar composite is comparatively low. An analysis of the Kriging variances shows that none of the methods tested here provides a satisfactory uncertainty estimate. A suitable variable transformation is expected to improve this.

Probabilistic wind power forecasts with an inverse power curve transformation and censored regression

Forecasting wind power is an important part of a successful integration of wind power into the power grid. Forecasts with lead times longer than 6 h are generally made by using statistical methods to post-process forecasts from numerical weather prediction systems. Two major problems that complicate this approach are the non-linear relationship between wind speed and power production and the limited range of power production between zero and nominal power of the turbine. In practice, these problems are often tackled by using non-linear non-parametric regression models. However, such an approach ignores valuable and readily available information: the power curve of the turbine's manufacturer. Much of the non-linearity can be directly accounted for by transforming the observed power production into wind speed via the inverse power curve so that simpler linear regression models can be used. Furthermore, the fact that the transformed power production has a limited range can be taken care of by employing censored regression models. In this study, we evaluate quantile forecasts from a range of methods: (i) using parametric and non-parametric models, (ii) with and without the proposed inverse power curve transformation and (iii) with and without censoring. The results show that with our inverse (power-to-wind) transformation, simpler linear regression models with censoring perform equally or better than non-linear models with or without the frequently used wind-to-power transformation.

Bayesian Estimation of the Logistic Positive Exponent IRT Model

A Bayesian inference approach using Markov Chain Monte Carlo (MCMC) is developed for the logistic positive exponent (LPE) model proposed by Samejima and for a new skewed Logistic Item Response Theory (IRT) model, named Reflection LPE model. Both models lead to asymmetric item characteristic curves (ICC) and can be appropriate because a symmetric ICC treats both correct and incorrect answers symmetrically, which results in a logical contradiction in ordering examinees on the ability scale. A data set corresponding to a mathematical test applied in Peruvian public schools is analyzed, where comparisons with other parametric IRT models also are conducted. Several model comparison criteria are discussed and implemented. The main conclusion is that the LPE and RLPE IRT models are easy to implement and seem to provide the best fit to the data set considered.