The Prognosis of the Traumatic Subarachnoid Hemorrhage: A Prospective Report of 121 Patients

Recent investigations have shown the significance of subarachnoid bleeding on computed tomography scans first taken after admission for head injuries. In our study, we describe a prospective follow-up of 121 patients with traumatic subarachnoid hemorrhage (tSAH). From January 2004 to January 2007 we collected data prospectively from 121 patients admitted with diagnosis of tSAH to our trauma intensive care unit, on the basis of admission with a computed tomography scan. The classification of tSAH was performed using the Fisher scale with modification, and the follow-up was performed using the Glasgow Outcome Scale (GOS). The minimum period for a follow-up was established 6 months after the injury. Traffic accident was the main cause of head injuries (72% in total; 48% involving cars and 24% involving motorcycles), followed by falls (23%) and aggression (5%). Twenty-eight percent of patients sustained major multiple injuries, with spinal injury as the main associated trauma. The outcome was favorable (GOS score 4 or 5) in 54 patients (45%) and unfavorable (GOS score 1, 2, or 3) in 67 patients (55%). The mortality rate was proportionally greater in patients who had cisternal clots >1 mm (P < 0.001), assessed by the Fisher scale with modification. When functional recovery was evaluated using the GOS, the recovery rate and the daily life activities were lower in patients with intraventricular bleeding (P = 0.001). Our results showed that patients with severe tSAH had the worst prognosis.

Modelação da contribuição do tráfego automóvel para a qualidade do ar em zona industrial

A preocupação sobre a qualidade do ar nas zonas industriais confere aos estudos sobre a qualidade do ar uma importância acrescida. Este trabalho teve como objectivo saber qual a contribuição dos principais poluentes provenientes do tráfego automóvel para a qualidade do ar na zona do parque industrial da Sapec, da Península da Mitrena, concelho de Setúbal, recorrendo ao modelo meteorológico e de qualidade do ar, TAPM (The Air Pollution Model). Neste trabalho analisaram-se dados da estação de monitorização da qualidade do ar, mais próxima da zona de estudo (Subestação) por forma a caracterizar-se a zona em causa, a nível meteorológico e da qualidade do ar. Os dados metereológico desta estação também foram utilizados com o objectivo de se validar os resultados meteorológicos obtidos pelo modelo. Na avaliação da contribuição do tráfego para a qualidade do ar, recorreu-se a um estudo de tráfego realizado pela Estradas de Portugal (EP) em 2004. Este estudo realizou a contagem dos veículos que se dirigiram ao parque industrial nos dias 14 e 15 de Dezembro, num período de 24 horas. A partir dessa contagem e de factores de emissão foi possível determinar a contribuição, de cada classe de veículo, para as concentrações atmosféricas de PM10 (resultantes de processos de combustão e ressuspensão), NOx, CO e HC. A comparação entre os dados meteorológicos simulados e medidos mostram que o modelo teve um bom comportamento, isto é, as discrepâncias entre os valores simulados e medidos foram mínimas. Relativamente à contribuição de cada categoria de veículos para a qualidade do ar, verificou-se que a classe de pesados de mercadorias foi aquela que mais contribui para as emissões de PM10, NOx e HC, enquanto que para as emissões de CO foram os veículos ligeiros de passageiros que tiveram uma maior contribuição. As classes dos motociclos e ciclomotores foram aquelas que tiveram uma menor contribuição para as concentrações atmosféricas de poluentes. Comparando as emissões de PM10 provenientes dos processos de combustão e de ressuspensão conclui-se que a maior percentagem provem da ressuspensão.

Helmet use among motorcyclists: observational study in the city of Mar del Plata, Argentina

The objective of the study was to assess the use of helmets in a community where helmet use is mandatory but low as there is no police enforcement. A sample comprising 451 motorcyclists in the city of Mar del Plata, Argentina, was studied in 2006. The following variables were studied: gender, type of motorcycle, weather conditions, time of the day, city area and type of road where motorcyclists traveled. Data were analyzed through a multiple logistic regression model. An overall 40% prevalence (95% CI: 35.5;44.5) of helmet use was found. Higher rates of helmet use were seen among women, and under unfavorable weather conditions, lower rates were found in the city outskirts, and variable use was seen according to the type of motorcycle. There is a need to improve law enforcement and to promote education of motorcyclists.

O impacte do endividamento nas empresas portuguesas

Mestrado em Contabilidade e Análise Financeira

Imparidades em inventários

Dissertação de Mestrado apresentada ao Instituto de Contabilidade e Administração do Porto para a obtenção do grau de Mestre em Contabilidade e Finanças, sob orientação da Doutora Albertina Paula Monteiro Esta versão contém as críticas e sugestões dos elementos do júri.

Implementation of a lean six sigma project in a production line

Companies from the motorcycles components branch are dealing with a dynamic environment, resulting from the introduction of new products and the increase of market demand. This dynamic environment requires frequent changes in production lines and requires flexibility in the processes, which can cause reductions in the level of quality and productivity. This paper presents a Lean Six Sigma improvement project performed in a production line of the company's machining sector, in order to eliminate losses that cause low productivity, affecting the fulfillment of the production plan and customer satisfaction. The use of Lean methodology following the DMAIC stages allowed analyzing the factors that influence the line productivity loss. The major problems and causes that contribute to a reduction on productivity and that were identified in this study are the lack of standardization in the setup activities and the excessive stoppages for adjustment of the processes that caused an increase of defects. Control charts, Pareto analysis and cause-and-effect diagrams were used to analyze the problem. On the improvement stage, the changes were based on the reconfiguration of the line layout as well as the modernization of the process. Overall, the project justified an investment in new equipment, the defective product units were reduced by 84% and an increase of 29% of line capacity was noticed.

Iowa Motorcycle Operator's Manual, 2002

The rules and regualtions for owning and operating a motorcycle in Iowa

Iowa Motorcycle Operator's Manual, April 27, 2009

The rules and regulations for owning and operating a motorcycle in Iowa

Iowa Motorcycle Operator Manual,1992.

This manual was developed in cooperation with the Motorcycle Safety Foundation to help you prepare to safely ride a motorcycle. Contains information on motorcycle equipment, safety precautions, laws and earning your license.

Iowa Motorcycle Operator's Manual, 2011

The rules and regualtions for owning and operating a motorcycle in Iowa

Motorcycle Conspicuity – What Factors Have the Greatest Impact, 2012.

The Iowa Motorcycle Operator Manual states that when a motorcycle and another vehicle collide, more than half of these crashes are caused by drivers entering the rider’s right-of-way. Furthermore, in crashes with motorcyclists, drivers often say they never saw the motorcycle. Therefore, increasing motorcycle conspicuity could help address these issues, resulting in fewer crashes (and injuries and damage).

Motorcycle conspicuity: what factors have the greatest impact (tech transfer summary)

This research investigated the impact of motorcycle headlight configurations, rider colors, and age of the drivers (participants) on motorcycle conspicuity in simulated urban and rural environments.

Iowa Motorcycle Ride Meter, HR-1019, 1980

The Iowa Department of Transportation (Iowa DOT) through the Highway Division is responsible for the design, construction and maintenance of roadways that will provide a high level of serviceability to the motorist. First, the motorist expects to be able to get where he wants to go, but now he also demands a minimum level of comfort. In the construction of new roadways, the public is quick to express dissatisfaction with rough pavements. The Highway Division of the Iowa DOT (formerly Iowa State Highway Commission) has a specification which requires a "smooth-riding surface". For over 40 years, new portland cement concrete (pcc) pavement has been checked with a 10-foot rolling straightedge. The contractor is required to grind, saw or mill off all high spots that deviate more than 1/8" from the 10-foot straight line. Unfortunately, there are instances where a roadway that will meet the above criteria does not provide a "smooth-riding surface". The roadway may have monger undulations (swales) that result in an undesirable ride. The objective of this project was to develop a repeatable, reliable time stable, lightweight test unit to measure the riding quality of pcc pavement at normal highway speed the day after construction.

Iowa Motorcycle Operator's Manual, 2014

The rules and regualtions for owning and operating a motorcycle in Iowa

Enhancing Motorcycle Conspicuity Awareness in Iowa, 2010

Previous studies in the United States and internationally suggest that low motorcycle conspicuity, or the inability of the motorcyclist to be seen by other road users, is thought to be an important factor associated with risk of motorcycle crashes. However, there has been limited research on motorcycle conspicuity in the United States in the past two decades, while at the same time; there has been a renewed interest from states in increasing motorcycle conspicuity and motorist awareness. As such, this research revisits the motorcycle conspicuity problem by analysis of helmet-use and motorcycle crash data. First, this study reviews previous studies on motorcycle conspicuity with a focus on the effectiveness of proposed measures for enhancing motorcycle conspicuity. The major trends in motorcycle helmet use by time of day and road type for motorcyclists, as indicated from three roadside observational roadside surveys in Iowa, are also discussed. Then, using motorcycle crash data for Iowa from 2001 to 2008, this research compares single-and two-vehicle motorcycle crashes and examines the distribution of conspicuity related factors in light and dark conditions in two-vehicle crashes that could potentially relate to a collision between a motorcycle and another vehicle. The limitations of examining motorcycle conspicuity by analysis of crash data are also discussed. Finally, this report outlines recommendations based on the key findings of the study.