Histochemical and morphological characteristics of the levator ani muscle in rats

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Placentation in cloned cattle: Structure and microvascular architecture

To elucidate the morphological differences between placentas from normal and cloned cattle pregnancies reaching term, the umbilical cord, placentomes and interplacentomal region of the fetal membranes were examined macroscopically as well as by light and scanning electron microscopy. In pregnancies established by somatic nucleus transfer (NT), the umbilical cord and fetal membranes were edematous. Placentomal fusion was common, resulting in increased size and a decreased number of placentomes. Extensive areas of the chorioallantoic membrane were devoid of placentomes. An increased number of functional or accessory microcotyledons (< 1 cm) were present at the maternally oriented surface of fetal membranes. Extensive areas of extravasated maternal blood were present within the placentomes and in the interplacentomal region. The crypts on the caruncular surface were dilated and accommodated complexes of more than one primary villus, as opposed to a single villus in non-cloned placentae. Scanning electron microscopy of blood vessel casts revealed that there was also more than one stem artery per villous tree and that the ramification of the vessels failed to form dense complexes of capillary loops and sinusoidal dilations as in normal pregnancies. At the materno-fetal interface, however, the trophoblast and uterine epithelium had normal histology. In conclusion, the NT placentas had a range of pathomorphological changes; this was likely associated with the poor clinical outcome of NT pregnancies. (c) 2007 Elsevier B.V. All rights reserved.

Morphological aspects of Culex quinquefasciatus salivary glands

The salivary glands of Culex quinquefasciatus female mosquitoes are paired organs composed of two lateral lobes with proximal and distal secretory portions, and a medial lobe. All portions comprise a simple epithelium that surrounds a salivary duct. In the apical portion of the medial lobe, non-secretory cells strongly resemble cells involved in ion and water transport. The general architecture of the secretory portions is similar between lobes. The appearance of the secretory material and the morphological aspect of the apical cell membrane are the most distinctive features among the three secretory portions. Cells in the lateral proximal lobe display thin membrane projections extending into a translucent and finely filamentous secretory product. At the lateral distal portion, the apical cell membrane forms an intricate meshwork that encloses a dark secretory product. Medial lobe secretory cells also contain secretory cavities surrounded by intracytoplasmic vesicles, all containing a very dark and uniform product. Scattered cells holding numerous vacuoles, some of them containing a small and electron-dense granule eccentrically located and resembling those of the diffuse endocrine system, are frequently observed in the periphery of all secretory portions. Immunofluorescence assays revealed that the distal portion of the lateral lobes contains apyrase, an enzyme putatively responsible for platelet aggregation inhibition, diffusely distributed in the cell cytoplasm. © 2003 Elsevier Ltd. All rights reserved.

Impaired protamination and sperm DNA damage in a Nellore bull with high percentages of morphological sperm defects in comparison to normospermic bulls

The routine semen evaluation assessing sperm concentration, motility and morphology, does not identify subtle defects in sperm chromatin architecture. Bulls appear to have stable chromatin, with low levels of DNA fragmentation. However, the nature of fragmentation and its impact on fertility remain unclear and there are no detailed reports characterizing the DNA organization and damage in this species. The intensive genetic selection, the use of artificial insemination and in vitro embryo production associated to the cryopreservation process can contribute to the chromatin damage and highlights the importance of sperm DNA integrity for the success of these technologies. Frozen-thawed semen samples from three ejaculates from a Nellore bull showed high levels of morphological sperm abnormalities (55.8±5.1%), and were selected for complementary tests. Damage of acrosomal (76.9±8.9%) and plasma membranes (75.7±9.3%) as well as sperm DNA strand breaks (13.8±9.5%) and protamination deficiency (3.7±0.6%) were significantly higher compared to the values measured in the semen of five Nellore bulls with normospermia (24.3±3.3%; 24.5±6.1%; 0.6±0.5%; 0.4±0.6% for acrosome, plasma membrane, DNA breaks and protamine deficiency, respectively) (P<0.05). Motility and percentage of spermatozoa with low mitochondrial potential showed no differences between groups. This study shows how routine semen analyses (in this case morphology) may point to the length and complexity of sperm cell damage emphasizing the importance of sperm function testing.

Kidney of Minke Whale (Baleanoptera acutorostrata): Architecture and structure

Sarmento C. A. P., Ferreira A. O., Rodrigues E. A. F., Lesnau G. G., Rici R. E. G., Abreu D. K., Biasi C. & Miglino M. A. 2012. [Kidney of Minke Whale (Baleanoptera acutorostrata): Architecture and structure.] Rins de Baleia Minke (Baleanoptera acutorostrata): arquitetura e estrutura. Pesquisa Veterinaria Brasileira 32(8): 807-811. Departamento de Cirurgia, Setor de Anatomia dos Animais Domesticos e Silvestres, Universidade de Sao Paulo, Av. Prof. Dr. Orlando Marques de Paiva 87, Sao Paulo, SP 05508-270, Brazil. E-mail: sarmento@usp.br Among marine mammals, whale is one of the most attention-arousing animals, especially concerning its urinary tract. This system follows the pattern of mammals with regard to its constitution, however, it differs in renal morphology and number of lobes, which, in turn, form complete reniculi, agglutinated in hundreds. This structure is supported by fibrous connective tissue, but highly capable of maintaining electrolyte balance. Six pairs of kidneys of Minke whale (Balaenoptera acutorostrata), collected in 1982, in Cabedelo, Paraiba, Brazil, in the last fishing allowed, were dissected. These kidneys were preserved in 10% formaldehyde and they presented a very large histologic layer of collagen surrounding the medullary wall. The urinary collecting duct form papillary glasses, that reach a single collecting center which discharges in the ureter. It was found that the kidney of Minke whale has a lobe characteristic, with, on average, 700 reniculi; each reniculus has anatomical and functional characteristics of a unipyramidal kidney, with an inner layer (medulla), and an outer layer (cortex), and independent irrigation, with formation of individually arcuate arteries, as observed in unipyramidal terrestrial mammals. However, the set gathering all these reniculi constitutes, in the end, a multilobular and polipyramidal kidney, contrary to the morphology of most terrestrial mammals. It was not possible to distinguish the renicular cortex structures of the Minke whale in the level of light microscopy. Through scanning electron microscopy, it was possible to visualize a cortical layer located between two fibrous capsules. This joint, in turn, consists of connective tissue, which, along with a layer of collagen and elastic fibers, separates the cortex from the medulla; the kidney glomeruli were visualized, completely taken by the glomerular vessels and arranged into several layers. One notices that the glomerular cavity is almost a virtual space into which the glomerular filtrate is drained, and it does not present a globular shape. Vascularization is increased in the medullary region. The difference between the kidneys of terrestrial and marine mammals consists in the arrangement of morphological components, favoring the organ's physiology.

Bone Volume Fraction and Fabric Anisotropy Are Better Determinants of Trabecular Bone Stiffness than Other Morphological Variables

As our population ages, more individuals suffer from osteoporosis. This disease leads to impaired trabecular architecture and increased fracture risk. It is essential to understand how morphological and mechanical properties of the cancellous bone are related. Morphologyelasticity relationships based on bone volume fraction (BV/TV) and fabric anisotropy explain up to 98% of the variation in elastic properties. Yet, other morphological variables such as individual trabeculae segmentation (ITS) and trabecular bone score (TBS) could improve the stiffness predictions. A total of 743 micro-computed tomography reconstructions of cubic trabecular bone samples extracted from femur, radius, vertebrae and iliac crest were analysed. Their morphology was assessed via 25 variables and their stiffness tensor (inline image) was computed from six independent load cases using micro finite element analyses. Variance inflation factors were calculated to evaluate collinearity between morphological variables and decide upon their inclusion in morphology-elasticity relationships. The statistically admissible morphological variables were included in a multi-linear regression modelling the dependent variable inline image. The contribution of each independent variable was evaluated (ANOVA). Our results show that BV/TV is the best determinant of inline image (inline image=0.889), especially in combination with fabric (inline image=0.968). Including the other independent predictors hardly affected the amount of variance explained by the model (inline image=0.975). Across all anatomical sites, BV/TV explained 87% of the variance of the bone elastic properties. Fabric further described 10% of the bone stiffness, but the improvement in variance explanation by adding other independent factors was marginal (<1%). These findings confirm that BV/TV and fabric are the best determinants of trabecular bone stiffness and show, against common belief, that other morphological variables do not bring any further contribution. These overall conclusions remain to be confirmed for specific bone diseases and post-elastic properties.

Morphological plasticity of the coral skeleton under CO2-driven seawater acidification

Ocean acidification causes corals to calcify at reduced rates, but current understanding of the underlying processes is limited. Here, we conduct a mechanistic study into how seawater acidification alters skeletal growth of the coral Stylophora pistillata. Reductions in colony calcification rates are manifested as increases in skeletal porosity at lower pH, while linear extension of skeletons remains unchanged. Inspection of the microstructure of skeletons and measurements of pH at the site of calcification indicate that dissolution is not responsible for changes in skeletal porosity. Instead, changes occur by enlargement of corallite-calyxes and thinning of associated skeletal elements, constituting a modification in skeleton architecture. We also detect increases in the organic matrix protein content of skeletons formed under lower pH. Overall, our study reveals that seawater acidification not only causes decreases in calcification, but can also cause morphological change of the coral skeleton to a more porous and potentially fragile phenotype.

Máquinas o atmósferas: La estética de la energía en la arquitectura, 1750-2000 = From Machines to Atmospheres: The Aesthetics of Energy in Architecture, 1750-2000

La energía es ya un tema arquitectónico, pero su incorporación al proyecto ha sido hasta ahora fundamentalmente técnica, dando pie a una especie de funcionalismo ecológico cuyo destino es acaso repetir los errores de los viejos funcionalismos en su confianza de encontrar modos ‘objetivos’ de transmutar la energía en forma construida, pero sin que en tal proceso parezca haber hueco para mediaciones de tipo estético. Sin embargo, son precisamente tales mediaciones las que necesitan analizarse para que la adopción de los temas energéticos resulte fructífera en la arquitectura, y asimismo para dar cuenta de otras perspectivas complementarias —filosóficas, científicas, artísticas— que hoy forman el complejo campo semántico de la energía. Partiendo de la fecha de 1750 —que da comienzo simbólicamente al proceso de contaminaciones ‘modernas’ entre la arquitectura y otras disciplinas—, esta tesis analiza los diferentes modos con los que proyectos y edificios han expresado literal y analógicamente ciertos temas o ideales energéticos, demostrando la existencia de una ‘estética de la energía’ en la arquitectura y también de una tradición proyectual e intelectual sostenida en ella. Con este fin, se han seleccionados siete metáforas que vinculan tanto técnica como ideológicamente a la arquitectura con la energía: la metáfora de la máquina, asociada al ideal de movimiento y la autorregulación; las metáforas del arabesco, del cristal y del organismo, afines entre sí en su modo de dar cuenta del principio de la morfogénesis o energía creadora de la naturaleza; la metáfora de la actividad interna de los materiales; la metáfora del gradiente, que expresa la condición térmica y climática de la arquitectura, y, finalmente, la de la atmósfera que, recogiendo los sentidos anteriores, los actualiza en el contexto de la estética contemporánea. La selección de estas siete metáforas se ha llevado a cabo después de un barrido exhaustivo de la bibliografía precedente, y ha estructurado un relato cuyo método combina la perspectiva general —que permite cartografiar las continuidades históricas— con la cercana —que atiende a las problemas específicos de cada tema o metáfora—, complementándolas con una aproximación de sesgo iconográfico cuyo propósito es incidir en los vínculos que se dan entre lo ideológico y lo morfológico. El análisis ha puesto de manifiesto cómo detrás de cada una de estas metáforas se oculta un principio ideológico común —la justificación de la arquitectura desde planteamientos externos procedentes de la ciencia, la filosofía y el arte—, y cómo en cada uno de los casos estudiados las asimilaciones más fructíferas de la energía se han producido según mecanismos de mímesis analógica que inciden más en los procesos que en las formas que estos generan, y que en último término son de índole estética, lo cual constituye un indicio de los métodos de la arquitectura por venir. ABSTRACT Although it is already an architectural theme, the matter of incorporating energy into projects has up to now been mainly technical, giving rise to a kind of ecological functionalism which may be bound to old funcionalist mistakes in hopes of finding “objective” ways of transmuting energy into built forms without aesthetic considerations. However, it is precisely such considerations that need to be analyzed if the adoption of energy issues in architecture is to bear fruit and also to account for other complementary perspectives – philosophical, scientific, artistic – which today form the complex fabric of the energy semantic field. Beginning in 1750 – symbolic start of ‘modern’ contaminations between architecture and other disciplines –, this thesis analyzes the different ways in which projects and buildings have literally and analogically expressed certain subjects or ideals on energy, and demonstrates the existence of an “aesthetics of energy” in architecture, as well as of an intellectual and design tradition based on such aesthetics. For this purpose, seven metaphors are selected to link energy to architecture both technically and ideologically: the machine’s metaphor, associated with the ideal of mouvement and self-regulation; the arabesque, glass and the organism’s metaphors, which account for the morphogenesis principle, i.e. creative energy of nature; the metaphor linked to matter and the ideal of internal activity; the gradient’s metaphor, which expressed the thermal and climatic condition of architecture, and, finally, that of the atmosphere which, collecting the above meanings, updates them in the context of contemporary aesthetics. The selection of these seven metaphors was carried out after a thorough scan of the preceding literature, and has structured a reasoning that combines the overview method – which accounts for historical continuities – with the nearby one – which meets the specifics problems of each theme or metaphor –, both supplemented with an iconographic bias, the purpose of which is to visually express the links existing between the ideological and the morphological. So presented, the analysis shows how, behind each of these metaphors, lies a common ideological principle – the justification of architecture from scientific, philosophical and artistic “external” angles –, and how in each of the studied cases the most successful assimilation of energy were those produced by aesthetic mechanisms of analogical mimesis not focused in forms but in processes that generate them: an indication of the methods of architecture to come.

Morphological classification of microtidal sand and gravel beaches

A new classification of microtidal sand and gravel beaches with very different morphologies is presented below. In 557 studied transects, 14 variables were used. Among the variables to be emphasized is the depth of the Posidonia oceanica. The classification was performed for 9 types of beaches: Type 1: Sand and gravel beaches, Type 2: Sand and gravel separated beaches, Type 3: Gravel and sand beaches, Type 4: Gravel and sand separated beaches, Type 5: Pure gravel beaches, Type 6: Open sand beaches, Type 7: Supported sand beaches, Type 8: Bisupported sand beaches and Type 9: Enclosed beaches. For the classification, several tools were used: discriminant analysis, neural networks and Support Vector Machines (SVM), the results were then compared. As there is no theory for deciding which is the most convenient neural network architecture to deal with a particular data set, an experimental study was performed with different numbers of neuron in the hidden layer. Finally, an architecture with 30 neurons was chosen. Different kernels were employed for SVM (Linear, Polynomial, Radial basis function and Sigmoid). The results obtained for the discriminant analysis were not as good as those obtained for the other two methods (ANN and SVM) which showed similar success.

Segmented polyurethane nanocomposites: Impact of controlled particle size nanofillers on the morphological response to uniaxial deformation

A series of TPU nanocomposites were prepared by incorporating organically modified layered silicates with controlled particle size. To our knowledge, this is the first study into the effects of layered silicate diameter in polymer nanocomposites utilizing the same mineral for each size fraction. The tensile properties of these materials were found to be highly dependent upon the size of the layered silicates. A decrease in disk diameter was associated with a sharp upturn in the stress-strain curve and a pronounced increase in tensile strength. Results from SAXS/SANS experiments showed that the layered silicates did not affect the bulk TPU microphase structure and the morphological response of the host TPU to deformation or promote/hinder strain-induced soft segment crystallization. The improved tensile properties of the nanocomposites containing the smaller nanofillers resulted from the layered silicates aligning in the direction of strain and interacting with the TPU sequences via secondary bonding. This phenomenon contributes predominantly above 400% strain once the microdomain architecture has largely been disassembled. Large tactoids that are unable to align in the strain direction lead to concentrated tensile stresses between the polymer and filler, instead of desirable shear stresses, resulting in void formation and reduced tensile properties. In severe cases, such as that observed for the composite containing the largest silicate, these voids manifest visually as stress whitening.

Communication Architecture Design for Real-Time Networked Control Systems

Networked control over data networks has received increasing attention in recent years. Among many problems in networked control systems (NCSs) is the need to reduce control latency and jitter and to deal with packet dropouts. This paper introduces our recent progress on a queuing communication architecture for real-time NCS applications, and simple strategies for dealing with packet dropouts. Case studies for a middle-scale process or multiple small-scale processes are presented for TCP/IP based real-time NCSs. Variations of network architecture design are modelled, simulated, and analysed for evaluation of control latency and jitter performance. It is shown that a simple bandwidth upgrade or adding hierarchy does not necessarily bring benefits for performance improvement of control latency and jitter. A co-design of network and control is necessary to maximise the real-time control performance of NCSs