Nouveau manuel complet du terrassier et de l'entrepreneur de terrassements : contenant une analyse complète des différents modes de transport, l'organisation des chantiers, les extractions de roches et les excavations souterraines et a ciel ouvert /

Mode of access: Internet.

The role of transport and mobility in the health of older people

The world's population is ageing. Older people are healthier and more active than previous generations. Living in a hypermobile world, people want to stay connected to dispersed communities as they age. Staying connected to communities and social networks enables older people to contribute and connect with society and is associated with positive mental and physical health, facilitating independence and physical activity while reducing social isolation. Changes in physiology and cognition associated with later life mean longer journeys may have to be curtailed. A shift in focus is needed to fully explore older people, transport and health; a need to be multidisciplinary in approach and to embrace social sciences and arts and humanities. A need to embrace different types of mobilities is needed for a full understanding of ageing, transport and health, moving from literal or corporeal through virtual and potential to imaginative mobility, taking into account aspirations and emotions. Mobility in later life is more than a means of getting to destinations and includes more affective or emotive associations. Cycling and walking are facilitated not just by improving safety but through social and cultural norms. Car driving can be continued safely in later life if people make appropriate and informed decisions about when and how to stop driving; stringent testing of driver ability and skill has as yet had little effect on safety. Bus use facilitates physical activity and keeps people connected but there are concerns for the future viability of buses. The future of transport may be more community led and involve more sharing of transport modes.

Estimates of Total Fuel Consumption in Transporting Grain from Iowa to Major Grain-Importing Countries by Alternative Modes and Routes, 1985

This study measured fuel consumption in transporting grain from Iowa origins to Japan and Amsterdam by alternative routes and modes of transport and applied these data to construct equations for fuel consumption from Iowa origins to alternative final destinations. Some of the results are as follows: (1) The metered tractor-trailer truck averaged 186.6 gross ton-miles per gallon and 90.5 net ton-miles per gallon when loaded 50% of total miles. (2) The 1983 fuel consumption of seven trucks taken from company records was 82.4 net ton-miles per gallon at 67.5% loaded miles and 68.6 net ton-miles per gallon at 50% loaded miles. (3) Unit grain trains from Iowa to West Coast ports averaged 437.0 net ton-miles per gallon whereas unit grain trains from Iowa to New Orleans averaged 640.1 net ton-miles per gallon--a 46% advantage for the New Orleans trips. (4) Average barge fuel consumption on the Mississippi River from Iowa to New Orleans export grain elevators was 544.5 net ton-miles per gallon, with a 35% backhaul rate. (5) Ocean vessel net ton-miles per gallon varies widely by size of ship and backhaul percentage. With no backhaul, the average net ton-miles per gallon were as follows: for 30,000 dwt ship, 574.8 net ton-miles per gallon; for 50,000 dwt ship, 701.9; for 70,000 dwt ship, 835.1; and for 100,000 dwt ship, 1,043.4. (6) The most fuel efficient route and modal combination to transport grain from Iowa to Japan depends on the size of ocean vessel, the percentage of backhaul, and the origin of the grain. Alternative routes and modal combinations in shipping grain to Japan are ranked in descending order of fuel efficiencies.

OPA1-related disorders: Diversity of clinical expression, modes of inheritance and pathophysiology

International audience

An investigation of the possible health-promoting modes of action of regular- and super- doses of phytase in the broiler chicken

The overall objective of this thesis was to study the effects of regular and high (super-) doses of phytase in the gut of broilers, with the aim of documenting the mechanism of their action leading to improvements in animal health. Phytase is often supplemented to commercial broiler diets to facilitate the hydrolysis of plant phytate and release of phosphorus for utilisation. Although not the original intention of its addition, phytase supplementation leads to improvements in growth performance parameters and enhanced nutrient utilisation. Further benefits have also been observed following the addition of super-doses of phytase which are not explained by an increase in phosphorus release, and thus have been termed ‘extra-phosphoric effects’. Using diets formulated to be adequate or marginally deficient in available phosphorus (aP; forming the negative control, NC), phytase was supplemented at 1,500 and 3,000 FTU/kg phytase in the first study (both super-doses) and the partitioning of nutrients within the body was investigated. It appeared that there were some metabolic changes between 1,500 and 3,000 FTU/kg, switching between protein and fat accretion, potentially as a consequence of nutrient availability, although these changes were not reflected by changes in growth performance parameters. However, the loss of the NC treatment without phytase on day 12 limits the comparison of the phytase within the NC treatment, but does allow for comparison of each dose at adequate or low dietary aP levels. As expected, a greater degree of phytate hydrolysis was achieved with 3,000 than with 1,500 FTU/kg phytase, but changes in carcass accretion characteristics were greater with 1,500 than 3,000 FTU/kg. Using these findings and the observation that there were no further changes in the parameters measured by increasing phytase from 1,500 to 3,000 FTU/kg (aside from phytate hydrolysis), 1,500 FTU/kg phytase was selected as the super-dose to be used in subsequent studies. The next study considered the influence of regular (500 FTU/kg) and super doses (1,500 FTU/kg) of phytase from within the gut. Overall, it was observed that changes were occurring to the gut environment, which ultimately would influence the absorptive capacity and conditions for further phytate hydrolysis. Dietary treatment influenced gut conditions such as pH, intestinal morphology and bacterial populations which can subsequently influence nutrient utilisation and potential for growth. The subsequent study was designed to investigate the effects within the gut in more detail. The release of nutrients from phytate hydrolysis and their bioavailability within the digesta can influence conditions within intestine, facilitating enhanced absorption. One of the parameters investigated was the expression of genes involved in the transport of nutrients in the intestine. Overall, there were few significant dietary treatment influences on gene expression in the intestine, however there was a dose-dependent response of phytase on the expression of the jejunual divalent mineral transporter. This indicates a change in divalent mineral bioavailability in the intestine, with correlations with inositol phosphate esters (IPs) being identified. This is likely explained by the IPs produced by phytase hydrolysis and accumulating in the digesta, differing between regular and high doses of phytase. It became apparent that interactions between the products of phytate hydrolysis (IP3, IP4) and minerals in the digesta had the potential to influence the gut environment and subsequent nutrient bioavailability and overall phytase action. The final study was designed to increase the content of the IPs, and investigate the influence of phytase under these conditions. As the complete hydrolysis of phytate to myo-inositol has been reported to be beneficial due to its proposed insulin mimetic effects, myo-inositol was also supplemented to one of the diets to see if any further benefits would be observed when supplemented alongside super-doses of phytase. Neither increased concentrations of the higher IP esters (IP6, IP5 and IP4) nor myo-inositol (myo-) had any effect on broiler growth performance, however there were still apparent beneficial influences of phytase supplementation. The results suggest considerable and important interactions between minerals and IP esters within the digesta, which ultimately have the potential to influence gut conditions and thus nutrient utilisation and growth performance. Reduced concentrations of blood glucose in the high IP ester diet with additional phytase supplementation suggest some insulin-like effects of myo- production. Additionally, the lack of effect of myo- supplementation on blood glucose and insulin concentrations suggests a difference between the structure of phytase-produced myo- and supplemented myo-. Although there were no improvements in growth performance by increasing phytase from 500 to 1,500 FTU/kg, there were changes occurring at the level of the gut and expression of genes in the intestine, influencing nutrient utilisation and the partitioning of nutrients within the body. There are many factors to be considered when supplementing phytase, with dietary nutrient content and nutrient release and IP production during phytate hydrolysis having an influence on phytase action, nutrient absorption and conditions within the gut. Super-doses of phytase may be beneficial for maintaining optimal gut conditions, clearing IP esters from the digesta, reducing their potential to form complexes with minerals and other nutrients, ultimately influencing the efficiency of production.

Performance of transport and selective media for swine Bordetella bronchiseptica recovery and it comparison to polymerase chain reaction detection

Three comparative assays were performed seeking to improve the sensitivity of the diagnosis of Bordetella bronchiseptica infection analyzing swine nasal swabs. An initial assay compared the recovery of B. bronchiseptica from swabs simultaneously inoculated with B. bronchiseptica and some interfering bacteria, immersed into three transport formulations (Amies with charcoal, trypticase soy broth and phosphate buffer according to Soerensen supplemented with 5% of bovine fetal serum) and submitted to different temperatures (10ºC and 27ºC) and periods of incubation (24, 72 and 120 hours). A subsequent assay compared three selective media (MacConkey agar, modified selective medium G20G and a ceftiofur medium) for their recovery capabilities from clinical specimens. One last assay compared the polymerase chain reaction to the three selective media. In the first assay, the recovery of B. bronchiseptica from transport systems was better at 27ºC and the three formulations had good performances at this temperature, but the collection of qualitative and quantitative analysis indicated the advantage of Amies medium for nasal swabs transportation. The second assay indicated that MacConkey agar and modified G20G had similar results and were superior to the ceftiofur medium. In the final assay, polymerase chain reaction presented superior capability of B. bronchiseptica detection to culture procedures.

Quasinormal modes of black holes in anti-de Sitter space: A numerical study of the eikonal limit

Using series solutions and time-domain evolutions, we probe the eikonal limit of the gravitational and scalar-field quasinormal modes of large black holes and black branes in anti-de Sitter backgrounds. These results are particularly relevant for the AdS/CFT correspondence, since the eikonal regime is characterized by the existence of long-lived modes which (presumably) dominate the decay time scale of the perturbations. We confirm all the main qualitative features of these slowly damped modes as predicted by Festuccia and Liu [G. Festuccia and H. Liu, arXiv:0811.1033.] for the scalar-field (tensor-type gravitational) fluctuations. However, quantitatively we find dimensional-dependent correction factors. We also investigate the dependence of the quasinormal mode frequencies on the horizon radius of the black hole (brane) and the angular momentum (wave number) of vector- and scalar-type gravitational perturbations.

Localized modes of binary mixtures of Bose-Einstein condensates in nonlinear optical lattices

The properties of the localized states of a two-component Bose-Einstein condensate confined in a nonlinear periodic potential (nonlinear optical lattice) are investigated. We discuss the existence of different types of solitons and study their stability by means of analytical and numerical approaches. The symmetry properties of the localized states with respect to nonlinear optical lattices are also investigated. We show that nonlinear optical lattices allow the existence of bright soliton modes with equal symmetry in both components and bright localized modes of mixed symmetry type, as well as dark-bright bound states and bright modes on periodic backgrounds. In spite of the quasi-one-dimensional nature of the problem, the fundamental symmetric localized modes undergo a delocalizing transition when the strength of the nonlinear optical lattice is varied. This transition is associated with the existence of an unstable solution, which exhibits a shrinking (decaying) behavior for slightly overcritical (undercritical) variations in the number of atoms.

Stability, causality, and quasinormal modes of cosmic strings and cylinders

In this work we consider the evolution of a massive scalar field in cylindrically symmetric space-times. Quasinormal modes have been calculated for static and rotating cosmic cylinders. We found unstable modes in some cases. Rotating as well as static cosmic strings, i.e., without regular interior solutions, do not display quasinormal oscillation modes. We conclude that rotating cosmic cylinder space-times that present closed timelike curves are unstable against scalar perturbations.

Quasinormal modes of brane-localized standard model fields in Gauss-Bonnet theory

We study the massless scalar, Dirac, and electromagnetic fields propagating on a 4D-brane, which is embedded in higher-dimensional Gauss-Bonnet space-time. We calculate, in the time domain, the fundamental quasinormal modes of a spherically symmetric black hole for such fields. Using WKB approximation we study quasinormal modes in the large multipole limit. We observe also a universal behavior, independent on a field and value of the Gauss-Bonnet parameter, at an asymptotically late time.

Gravitational quasinormal modes of AdS black branes in d spacetime dimensions

The AdS/CFT duality has established a mapping between quantities in the bulk AdS black-hole physics and observables in a boundary finite-temperature field theory. Such a relationship appears to be valid for an arbitrary number of spacetime dimensions, extrapolating the original formulations of Maldacena`s correspondence. In the same sense properties like the hydrodynamic behavior of AdS black-hole fluctuations have been proved to be universal. We investigate in this work the complete quasinormal spectra of gravitational perturbations of d-dimensional plane-symmetric AdS black holes (black branes). Holographically the frequencies of the quasinormal modes correspond to the poles of two-point correlation functions of the field-theory stress-energy tensor. The important issue of the correct boundary condition to be imposed on the gauge-invariant perturbation fields at the AdS boundary is studied and elucidated in a fully d-dimensional context. We obtain the dispersion relations of the first few modes in the low-, intermediate- and high-wavenumber regimes. The sound-wave (shear-mode) behavior of scalar (vector)-type low- frequency quasinormal mode is analytically and numerically confirmed. These results are found employing both a power series method and a direct numerical integration scheme.

Experimental and theoretical study of transport properties in uniaxially pressed (Bi, Pb)(2)Sr(2)Ca(2)Cu(3)O(10+delta) ceramic samples

Experimental and theoretical studies on the magnetic field dependence of the electrical resistance R(B(a)) and the transport noise (TN) in polycrystalline high-T(c) superconductors subjected to different uniaxial compacting pressures were conducted. X-ray diffraction rocking curves were performed in different surfaces of the samples in order to investigated the degree of texture The results indicated an improvement of the degree of texture with increasing the uniaxial compacting pressure In theoretical simulations of the data, the polycrystalline superconductors were described as a series-parallel array of Josephson devices The intergranular magnetic field is described within the framework of the intragranular flux-trapping model and the distribution of the grain-boundary angles is assumed to follow the Rayleigh statistical function The proposed model describes well the experimental magnetoresistance R(B(a)) data We have found that the behavior of the R(B(a)) curves changes appreciably when different uniaxially compacting pressures are applied to the sample and such a changes are reproduced by the model when different grain-boundary angles distributions are used In addition, changes in the R(B(a)) dependence have their counterparts in the experimental transport noise signals (C) 2009 Elsevier B.V. All rights reserved

Evaluation of proximal caries in images resulting from different modes of radiographic digitalization

Objective: The aim of this study was to evaluate the performances of observers in diagnosing proximal caries in digital images obtained from digital bitewing radiographs using two scanners and four digital cameras in Joint Photographic Experts Group (JPEG) and tagged image file format (TIFF) files, and comparing them with the original conventional radiographs. Method: In total, 56 extracted teeth were radiographed with Kodak Insight film (Eastman Kodak, Rochester, NY) in a Kaycor Yoshida X-ray device (Kaycor X-707;Yoshida Dental Manufacturing Co., Tokyo, Japan) operating at 70 kV and 7 mA with an exposure time of 0.40 s. The radiographs were obtained and scanned by CanonScan D646U (Canon USA Inc., Newport News, VA) and Genius ColorPage HR7X (KYE Systems Corp. America, Doral, FL) scanners, and by Canon Powershot G2 (Canon USA Inc.), Canon RebelXT (Canon USA Inc.), Nikon Coolpix 8700 (Nikon Inc., Melville, NY), and Nikon D70s (Nikon Inc.) digital cameras in JPEG and TIFF formats. Three observers evaluated the images. The teeth were then observed under the microscope in polarized light for the verification of the presence and depth of the carious lesions. Results: The probability of no diagnosis ranged from 1.34% (Insight film) to 52.83% (CanonScan/JPEG). The sensitivity ranged from 0.24 (Canon RebelXT/JPEG) to 0.53 (Insight film), the specificity ranged from 0.93 (Nikon Coolpix/JPEG, Canon Powershot/TIFF, Canon RebelXT/JPEG and TIFF) to 0.97 (CanonScan/TIFF and JPEG) and the accuracy ranged from 0.82 (Canon RebelXT/JPEG) to 0.91 (CanonScan/JPEG). Conclusion: The carious lesion diagnosis did not change in either of the file formats (JPEG and TIFF) in which the images were saved for any of the equipment used. Only the CanonScan scanner did not have adequate performance in radiography digitalization for caries diagnosis and it is not recommended for this purpose. Dentomaxillofacial Radiology (2011) 40, 338-343. doi: 10.1259/dmfr/67185962

Reliability and Failure Modes of Implant-Supported Y-TZP and MCR Three-Unit Bridges

Purpose: Chipping within veneering porcelain has resulted in high clinical failure rates for implant-supported zirconia (yttria-tetragonal zirconia polycrystals [Y-TZP]) bridges. This study evaluated the reliability and failure modes of mouth-motion step-stress fatigued implant-supported Y-TZP versus palladium-silver alloy (PdAg) three-unit bridges. Materials and Methods: Implant-abutment replicas were embedded in polymethylmethacrylate resin. Y-TZP and PdAg frameworks, of similar design (n = 21 each), were fabricated, veneered, cemented (n = 3 each), and Hertzian contact-tested to obtain ultimate failure load. In each framework group, 18 specimens were distributed across three step-stress profiles and mouth-motion cyclically loaded according to the profile on the lingual slope of the buccal cusp of the pontic. Results: PdAg failures included competing flexural cracking at abutment and/or connector area and chipping, whereas Y-TZP presented predominantly cohesive failure within veneering porcelain. Including all failure modes, the reliability (two-sided at 90% confidence intervals) for a ""mission"" of 50,000 and 100,000 cycles at 300 N load was determined (Alta Pro, Reliasoft, Tucson, AZ, USA). No difference in reliability was observed between groups for a mission of 50,000. Reliability remained unchanged for a mission of 100,000 for PdAg, but significantly decreased for Y-TZP. Conclusions: Higher reliability was found for PdAg for a mission of 100,000 cycles at 300 N. Failure modes differed between materials.