Frequency and impact of autosomal dominant polycystic kidney disease in the Seychelles (Indian Ocean).

BACKGROUND: As little such data is available in African populations, we investigated the prevalence of ADPKD and the impact of the disease in the Seychelles islands, where approximately 65% of the population is of African descent and 30% of Caucasian or mixed descent. METHODS: Prevalent cases were identified over a 3-year period by requesting all the doctors in the country (most of them are employed within a national health system) to refer all presumed or confirmed cases and by systematically examining the family members of all confirmed cases. The diagnosis was based on standard criteria including ultrasonographic findings and family history. RESULTS: Forty-two cases were identified in this population of 74,331 inhabitants, a total prevalence (per 100,000 total population) of 57 (95% CI, 41-76). All but one of the cases were of Caucasian descent so that the prevalence rates of the disease in the populations of Black and Caucasian descents were respectively 2 (0-11) and 184 (132-249). The prevalence rates of the gene(s) carriers were estimated to be 75 (45-117) in the total population respectively 6 (0-33) and 236 (140-372) in the Black and Caucasian populations. Haplotype analysis in 58 cases from three families showed a common DNA fragment in all affected individuals. Cases had significantly higher blood pressure compared to the general population and 21% had serum creatinine higher than 120 mumol/l. Among the established pedigrees, mean age of death between 1960 and 1995 (haemodialysis was introduced in 1992) was younger in subjects with than those without ADPKD (50.5 vs 67.7 years; P < 0.001). CONCLUSIONS: In the Seychelles, ADPKD clusters in the Caucasian population (possibly a founder effect), is rare in individuals of black descent, and is associated with substantial clinical and survival impact.

Jaundice-Should "yellow" be a red code?

Objective: Jaundice is the clinical manifestation, of hyperbilirubinemia. It is considered as a sign of either a liver disease or, less often, of a hemolytic disorder. It can be divided into obstructive and non obstructive type, involving increase of indirect (non-conjugated) bilirubin or increase of direct (conjugated) bilirubin, respectively, but it can be also manifested as mixed type. Methods: This article updates the current knoweledge concerning the jaundice's etiology, pathophysiological mechanisms, and complications ant treatment by reviewing of the latest medical literature. It also presents an approach of jaundice's treatment and pathogenesis, in special populations as in neonates and pregnant women. Results: The treatment is consistent in the management of the subjective diseases responsible for the jaundice and its complications.The clinical prognosis of the jaundice depends on the etiology. Surgical treatment of jaundiced patients is associated with high mortality and morbidity rates. Studies have shown that the severity of jaundice and the presence of malignant disease are importan risk factors for post-operative mortality. Conclusions: Early detection of jaundice is of vital importance because of its involvement in malignancy or in other benign conditions requiring immediate treatment in order to avoid further complications.

Esituotannon aikainen konseptien verifiointi muovituotteen valmistusessa

 Diplomityön tavoitteena on tutkia ja kehittää muovituotteen valmistuskonseptien verifiointimenetelmiä ja luoda malli, jolla saadaan esituotantovaiheestalähtien parannettu tuotantoprosessi massatuotannon aloittamiseen (ramp up). Työn tavoitteena on myös toimia viestintäkeinona lisäämässä organisaation tietoisuutta esituotantovaiheen tärkeydestä. Työ pohjautuu tekijän aikaisempaan tutkimukseen "esituotantoprosessista oppimisen vaikutukset massatuotannon aloitukseen", joka on tehty erikoistyönä v.2006. Tutkimus menetelminä on käytetty pääasiassa prosessien kuvaamista, benchmarkingia, asiantuntijoiden haastatteluja sekä analysoitu toteutuneita projekteja. Lopputuloksena on saatu toimintamalli, joka vastaa hyvin pitkälle prosessien kuvausten aikana syntynyttä mallia. Keskeisenä ajatuksena on valmistuskonseptin verifioinnin kytkeminen tuotteen mekaniikkasuunnittelun kypsyyteen. Koko projektia koskevien tavoitteiden määrittäminen johdetaan ramp up tavoitteista. Verifioitavaksi valitaan kriittisin tuote ja prosessi. Tähän on teoreettisena viitekehyksenä käytetty Quality Function Deployment (QFD) menetelmää. Jatkotoimenpiteiksi esitetään ramp up tavoitteiden ja mittareiden kehittämistä, joilla pystytään seuraamaan ja ohjaamaan projektia jo heti alusta alkaen. Lisätutkimusta tarvitaan myös esituotannon aikaisten prosessiparametrien suunnitteluun ja optimointiin.

Tool-supported invariant-based programming

The development of correct programs is a core problem in computer science. Although formal verification methods for establishing correctness with mathematical rigor are available, programmers often find these difficult to put into practice. One hurdle is deriving the loop invariants and proving that the code maintains them. So called correct-by-construction methods aim to alleviate this issue by integrating verification into the programming workflow. Invariant-based programming is a practical correct-by-construction method in which the programmer first establishes the invariant structure, and then incrementally extends the program in steps of adding code and proving after each addition that the code is consistent with the invariants. In this way, the program is kept internally consistent throughout its development, and the construction of the correctness arguments (proofs) becomes an integral part of the programming workflow. A characteristic of the approach is that programs are described as invariant diagrams, a graphical notation similar to the state charts familiar to programmers. Invariant-based programming is a new method that has not been evaluated in large scale studies yet. The most important prerequisite for feasibility on a larger scale is a high degree of automation. The goal of the Socos project has been to build tools to assist the construction and verification of programs using the method. This thesis describes the implementation and evaluation of a prototype tool in the context of the Socos project. The tool supports the drawing of the diagrams, automatic derivation and discharging of verification conditions, and interactive proofs. It is used to develop programs that are correct by construction. The tool consists of a diagrammatic environment connected to a verification condition generator and an existing state-of-the-art theorem prover. Its core is a semantics for translating diagrams into verification conditions, which are sent to the underlying theorem prover. We describe a concrete method for 1) deriving sufficient conditions for total correctness of an invariant diagram; 2) sending the conditions to the theorem prover for simplification; and 3) reporting the results of the simplification to the programmer in a way that is consistent with the invariantbased programming workflow and that allows errors in the program specification to be efficiently detected. The tool uses an efficient automatic proof strategy to prove as many conditions as possible automatically and lets the remaining conditions be proved interactively. The tool is based on the verification system PVS and i uses the SMT (Satisfiability Modulo Theories) solver Yices as a catch-all decision procedure. Conditions that were not discharged automatically may be proved interactively using the PVS proof assistant. The programming workflow is very similar to the process by which a mathematical theory is developed inside a computer supported theorem prover environment such as PVS. The programmer reduces a large verification problem with the aid of the tool into a set of smaller problems (lemmas), and he can substantially improve the degree of proof automation by developing specialized background theories and proof strategies to support the specification and verification of a specific class of programs. We demonstrate this workflow by describing in detail the construction of a verified sorting algorithm. Tool-supported verification often has little to no presence in computer science (CS) curricula. Furthermore, program verification is frequently introduced as an advanced and purely theoretical topic that is not connected to the workflow taught in the early and practically oriented programming courses. Our hypothesis is that verification could be introduced early in the CS education, and that verification tools could be used in the classroom to support the teaching of formal methods. A prototype of Socos has been used in a course at Åbo Akademi University targeted at first and second year undergraduate students. We evaluate the use of Socos in the course as part of a case study carried out in 2007.

Virtual Testing of Active Magnetic Bearing Systems based on Design Guidelines given by the Standards

Active Magnetic Bearings offer many advantages that have brought new applications to the industry. However, similarly to all new technology, active magnetic bearings also have downsides and one of those is the low standardization level. This thesis is studying mainly the ISO 14839 standard and more specifically the system verification methods. These verifying methods are conducted using a practical test with an existing active magnetic bearing system. The system is simulated with Matlab using rotor-bearing dynamics toolbox, but this study does not include the exact simulation code or a direct algebra calculation. However, this study provides the proof that standardized simulation methods can be applied in practical problems.

A controlled clinical trial on the effects of motor intervention on balance and cognition in institutionalized elderly patients with dementia

Purpose: To analyse the effects of two interventions on the cognition and balance of institutionalized elderly people with mixed dementia.Methods: Fifty-four participants were allocated into three groups. Group 1 was assisted by an interdisciplinary programme comprising physiotherapy, occupational therapy and physical education. A physiotherapist alone carried out the intervention in group 2. Group 3 was considered as control. Assessors were blinded to guarantee the absence of bias. Cognitive functions were analysed with the Mini-Mental State Examination and the Brief Cognitive Screening Battery. Balance was assessed with the Berg Balance Scale and the Timed Get-Up-and-Go Test. Multiple analysis of variance (MANOVA) was used to test possible main effects of the interventions.Results: The results showed benefits on the balance of subjects in both groups 1 (F=3.9, P < 0.05) and 2 (F= 3.1, P < 0.05), compared with group 3. MANOVA did not indicate benefits on the cognitive functions between groups 1 and 3 (F= 1.1, P > 0.05) and groups 2 and 3 (F= 1.6, P > 0.05). However, univariate analysis indicated some benefits of the interdisciplinary intervention on two specific domains measured by the Brief Cognitive Screening Battery (F=26.5, P < 0.05; F= 4.4, P < 0.05).Conclusion: Six months of multidisciplinary or physiotherapeutic intervention were able to improve a person's balance. Although global cognition did not improve through treatment, when the intervention was carried out on a multidisciplinary basis we observed an attenuation in the decline of global cognition on two specific cognitive domains. Exercises applied in different contexts may have positive outcomes for people with dementia.

Efeitos dentoesqueléticos produzidos pelo aparelho de Herbst na dentadura mista

OBJETIVO: o objetivo desta pesquisa clínica prospectiva foi avaliar as alterações cefalométricas dentárias e esqueléticas produzidas pelo aparelho de Herbst em jovens com má oclusão de Classe II, 1ª divisão durante a dentadura mista. METODOLOGIA: trinta jovens (15 do gênero masculino e 15 do feminino) com idade média inicial de 9 anos e 10 meses foram tratados com o aparelho de Herbst por um período de 12 meses. Para a comparação dos grupos utilizou-se uma amostra controle de 30 jovens (15 do gênero masculino e 15 do feminino) Classe II, 1ª divisão, com idade média inicial de 9 anos e 8 meses, que foram mantidos sem tratamento durante 12 meses. Para cada jovem foram utilizadas duas telerradiografias em norma lateral, obtidas ao início e no final do período de acompanhamento. Utilizou-se um método convencional de avaliação cefalométrica e o método proposto por Pancherz. RESULTADOS E CONCLUSÕES: os resultados deste estudo demonstraram que os efeitos do aparelho de Herbst produzidos na dentadura mista foram primariamente de natureza dentoalveolar. Os incisivos inferiores foram inclinados para vestibular e os superiores foram retruídos; também houve uma extrusão significante dos molares inferiores, enquanto os superiores sofreram restrição de desenvolvimento no sentido vertical. Não houve diferença significante de restrição do crescimento anterior da maxila entre os dois grupos. No sentido vertical da face, a altura facial ântero-inferior se comportou de forma similar, não demonstrando alteração significante entre os grupos. O tratamento com o aparelho de Herbst produziu um aumento modesto, porém, significante no comprimento da mandíbula comparado ao grupo controle. Este aumento, entretanto, foi de menor magnitude que aquele observado em pacientes adolescentes utilizando o mesmo protocolo de tratamento. A correção do overjet (Herbst) ocorreu devido a 22% de alterações esqueléticas e 78% de alterações dentárias. A correção da relação molar ocorreu devido a 27% de alterações esqueléticas e 73% de alterações dentárias.

Uso das rotações de givens modificadas como um método direto para obtenção e atualização das soluções em sistemas com acumulação seqüencial de dados

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Predicting Accurate and Actionable Static Analysis Warnings: An Experimental Approach

Static analysis tools report software defects that may or may not be detected by other verification methods. Two challenges complicating the adoption of these tools are spurious false positive warnings and legitimate warnings that are not acted on. This paper reports automated support to help address these challenges using logistic regression models that predict the foregoing types of warnings from signals in the warnings and implicated code. Because examining many potential signaling factors in large software development settings can be expensive, we use a screening methodology to quickly discard factors with low predictive power and cost-effectively build predictive models. Our empirical evaluation indicates that these models can achieve high accuracy in predicting accurate and actionable static analysis warnings, and suggests that the models are competitive with alternative models built without screening.

Propensity score matching approach to test the association of income inequality and mortality in Sao Paulo, Brazil

Background Support for the adverse effect of high income inequality on population health has come from studies that focus on larger areas, such as the US states, while studies at smaller geographical areas (eg, neighbourhoods) have found mixed results. Methods We used propensity score matching to examine the relationship between income inequality and mortality rates across 96 neighbourhoods (distritos) of the municipality of Sao Paulo, Brazil. Results Prior to matching, higher income inequality distritos (Gini >= 0.25) had slightly lower overall mortality rates (2.23 per 10 000, 95% CI -23.92 to 19.46) compared to lower income inequality areas (Gini <0.25). After propensity score matching, higher inequality was associated with a statistically significant higher mortality rate (41.58 per 10 000, 95% CI 8.85 to 73.3). Conclusion In Sao Paulo, the more egalitarian communities are among some of the poorest, with the worst health profiles. Propensity score matching was used to avoid inappropriate comparisons between the health status of unequal (but wealthy) neighbourhoods versus equal (but poor) neighbourhoods. Our methods suggest that, with proper accounting of heterogeneity between areas, income inequality is associated with worse population health in Sao Paulo.

Predictors of vaginal practices for sex and hygiene in KwaZulu-Natal, South Africa: findings of a household survey and qualitative inquiry

Vaginal practices in sub-Saharan Africa may increase HIV transmission and have important implications for development of microbicides and future HIV prevention technologies. It remains unclear which women undertake vaginal practices and what factors predict prevalence, practice type and choice of products. Using cross-sectional data from mixed research methods, we identify factors associated with vaginal practices among women in KwaZulu-Natal, South Africa. Data were gathered through focus group discussions, in-depth and key-informant interviews, followed by a province-wide, multi-stage cluster household survey, using structured questionnaires in face-to-face interviews with 867 women. This paper details six types of vaginal practices, which--despite their individual distinctiveness and diverse motivations--may be clustered into two broad groups: those undertaken for purposes of 'hygiene' (genital washing, douching and application) and those for 'sexual motivations' (application, insertion, ingestion and incisions). Multivariate analysis found significant associations between 'hygiene' practices and media access, religiosity and transactional sex. 'Sexual' practices were associated with partner concurrency, religiosity and use of injectable hormonal contraceptives. Future interventions relating to vaginal practices as well as microbicides need to reflect this characterisation of practices as sexual- and/or hygiene-related.

Skilled nursing facilities : available data show average nursing staff time changed little after Medicare payment increase : report to congressional committees.

"GAO-03-176."

Energy conservation measures on an industrial site

World and UK energy resources and use are reviewed and the role of energy conservation in energy policy identified. In considering various energy conservation measures, a distinction is made between energy intensive and non-intensive industries and also between direct and indirect uses of energy. Particular attention is given to the non-intensive user of energy. Energy use on one such industrial site has been studied to determine the most effective energy saving measures in the short term. Here it is estimated that over 65% of energy is consumed for indirect purposes, mainly for heating and lighting buildings. Emphasis is placed on energy auditing techniques and those energy saving measures requiring greater technical, economic and organisational resources to secure their implementation. Energy auditing techniques include the use of aerial thermography and snow formation surveys to detect heat losses. Qualitative and quantitative interpretations are carried out, but restricted mainly to evaluating building roof heat losses. From the energy auditing exercise, it is confirmed that the intermittent heating of buildings is the largest and most cost effective fuel saving measure. This was implemented on the site and a heat monitoring programme established to verify results. Industrial combined heat and power generation is investigated. A proposal for the site demonstrates that there are several obstacles to its successful implementation. By adopting an alternative financial rationale, a way of overcoming these obstacles is suggested. A useful by-product of the study is the classification of industrial sites according to the nature of industrial energy demand patterns. Finally, energy saving measures implemented on the site are quantlfied using comparative verification methods. Overall fuel savings of 13% are indicated. Cumulative savings in heating fuel amount to 26% over four years although heated area increased by approximately 25%.

Use of posterior predictive assessments to evaluate model fit in multilevel logistic regression

Assessing the fit of a model is an important final step in any statistical analysis, but this is not straightforward when complex discrete response models are used. Cross validation and posterior predictions have been suggested as methods to aid model criticism. In this paper a comparison is made between four methods of model predictive assessment in the context of a three level logistic regression model for clinical mastitis in dairy cattle; cross validation, a prediction using the full posterior predictive distribution and two “mixed” predictive methods that incorporate higher level random effects simulated from the underlying model distribution. Cross validation is considered a gold standard method but is computationally intensive and thus a comparison is made between posterior predictive assessments and cross validation. The analyses revealed that mixed prediction methods produced results close to cross validation whilst the full posterior predictive assessment gave predictions that were over-optimistic (closer to the observed disease rates) compared with cross validation. A mixed prediction method that simulated random effects from both higher levels was best at identifying the outlying level two (farm-year) units of interest. It is concluded that this mixed prediction method, simulating random effects from both higher levels, is straightforward and may be of value in model criticism of multilevel logistic regression, a technique commonly used for animal health data with a hierarchical structure.

Verification of a mixed high-order accurate DNS code for laminar turbulent transition by the method of manufactured solutions

This paper presents results on a verification test of a Direct Numerical Simulation code of mixed high-order of accuracy using the method of manufactured solutions (MMS). This test is based on the formulation of an analytical solution for the Navier-Stokes equations modified by the addition of a source term. The present numerical code was aimed at simulating the temporal evolution of instability waves in a plane Poiseuille flow. The governing equations were solved in a vorticity-velocity formulation for a two-dimensional incompressible flow. The code employed two different numerical schemes. One used mixed high-order compact and non-compact finite-differences from fourth-order to sixth-order of accuracy. The other scheme used spectral methods instead of finite-difference methods for the streamwise direction, which was periodic. In the present test, particular attention was paid to the boundary conditions of the physical problem of interest. Indeed, the verification procedure using MMS can be more demanding than the often used comparison with Linear Stability Theory. That is particularly because in the latter test no attention is paid to the nonlinear terms. For the present verification test, it was possible to manufacture an analytical solution that reproduced some aspects of an instability wave in a nonlinear stage. Although the results of the verification by MMS for this mixed-order numerical scheme had to be interpreted with care, the test was very useful as it gave confidence that the code was free of programming errors. Copyright (C) 2009 John Wiley & Sons, Ltd.