Developing a hybrid expert system program to aid in the design of plastic injection molding process

Experts in injection molding often refer to previous solutions to find a mold design similar to the current mold and use previous successful molding process parameters with intuitive adjustment and modification as a start for the new molding application. This approach saves a substantial amount of time and cost in experimental based corrective actions which are required in order to reach optimum molding conditions. A Case-Based Reasoning (CBR) System can perform the same task by retrieving a similar case which is applied to the new case from the case library and uses the modification rules to adapt a solution to the new case. Therefore, a CBR System can simulate human e~pertise in injection molding process design. This research is aimed at developing an interactive Hybrid Expert System to reduce expert dependency needed on the production floor. The Hybrid Expert System (HES) is comprised of CBR, flow analysis, post-processor and trouble shooting systems. The HES can provide the first set of operating parameters in order to achieve moldability condition and producing moldings free of stress cracks and warpage. In this work C++ programming language is used to implement the expert system. The Case-Based Reasoning sub-system is constructed to derive the optimum magnitude of process parameters in the cavity. Toward this end the Flow Analysis sub-system is employed to calculate the pressure drop and temperature difference in the feed system to determine the required magnitude of parameters at the nozzle. The Post-Processor is implemented to convert the molding parameters to machine setting parameters. The parameters designed by HES are implemented using the injection molding machine. In the presence of any molding defect, a trouble shooting subsystem can determine which combination of process parameters must be changed iii during the process to deal with possible variations. Constraints in relation to the application of this HES are as follows. - flow length (L) constraint: 40 mm < L < I 00 mm, - flow thickness (Th) constraint: -flow type: - material types: I mm < Th < 4 mm, unidirectional flow, High Impact Polystyrene (HIPS) and Acrylic. In order to test the HES, experiments were conducted and satisfactory results were obtained.

Development and evaluation of hydrocarbon sorbent materials with the aid of chemometrics

Hydrocarbon spills on roads are a major safety concern for the driving public and can have severe cost impacts both on pavement maintenance and to the economy through disruption to services. The time taken to clean-up spills and re-open roads in a safe driving condition is an issue of increasing concern given traffic levels on major urban arterials. Thus, the primary aim of the research was to develop a sorbent material that facilitates rapid clean-up of road spills. The methodology involved extensive research into a range of materials (organic, inorganic and synthetic sorbents), comprehensive testing in the laboratory, scale-up and field, and product design (i.e. concept to prototype). The study also applied chemometrics to provide consistent, comparative methods of sorbent evaluation and performance. In addition, sorbent materials at every stage were compared against a commercial benchmark. For the first time, the impact of diesel on asphalt pavement has been quantified and assessed in a systematic way. Contrary to conventional thinking and anecdotal observations, the study determined that the action of diesel on asphalt was quite rapid (i.e. hours rather than weeks or months). This significant finding demonstrates the need to minimise the impact of hydrocarbon spills and the potential application of the sorbent option. To better understand the adsorption phenomenon, surface characterisation techniques were applied to selected sorbent materials (i.e. sand, organo-clay and cotton fibre). Brunauer Emmett Teller (BET) and thermal analysis indicated that the main adsorption mechanism for the sorbents occurred on the external surface of the material in the diffusion region (sand and organo-clay) and/or capillaries (cotton fibre). Using environmental scanning electron microscopy (ESEM), it was observed that adsorption by the interfibre capillaries contributed to the high uptake of hydrocarbons by the cotton fibre. Understanding the adsorption mechanism for these sorbents provided some guidance and scientific basis for the selection of materials. The study determined that non-woven cotton mats were ideal sorbent materials for clean-up of hydrocarbon spills. The prototype sorbent was found to perform significantly better than the commercial benchmark, displaying the following key properties: • superior hydrocarbon pick-up from the road pavement; • high hydrocarbon retention capacity under an applied load; • adequate field skid resistance post treatment; • functional and easy to use in the field (e.g. routine handling, transportation, application and recovery); • relatively inexpensive to produce due to the use of raw cotton fibre and simple production process; • environmentally friendly (e.g. renewable materials, non-toxic to environment and operators, and biodegradable); and • rapid response time (e.g. two minutes total clean-up time compared with thirty minutes for reference sorbents). The major outcomes of the research project include: a) development of a specifically designed sorbent material suitable for cleaning up hydrocarbon spills on roads; b) submission of patent application (serial number AU2005905850) for the prototype product; and c) preparation of Commercialisation Strategy to advance the sorbent product to the next phase (i.e. R&D to product commercialisation).

Autonomous underwater vehicle trajectory design coupled with predictive ocean models : a case study

Data collection using Autonomous Underwater Vehicles (AUVs) is increasing in importance within the oceano- graphic research community. Contrary to traditional moored or static platforms, mobile sensors require intelligent planning strategies to manoeuvre through the ocean. However, the ability to navigate to high-value locations and collect data with specific scientific merit is worth the planning efforts. In this study, we examine the use of ocean model predictions to determine the locations to be visited by an AUV, and aid in planning the trajectory that the vehicle executes during the sampling mission. The objectives are: a) to provide near-real time, in situ measurements to a large-scale ocean model to increase the skill of future predictions, and b) to utilize ocean model predictions as a component in an end-to-end autonomous prediction and tasking system for aquatic, mobile sensor networks. We present an algorithm designed to generate paths for AUVs to track a dynamically evolving ocean feature utilizing ocean model predictions. This builds on previous work in this area by incorporating the predicted current velocities into the path planning to assist in solving the 3-D motion planning problem of steering an AUV between two selected locations. We present simulation results for tracking a fresh water plume by use of our algorithm. Additionally, we present experimental results from field trials that test the skill of the model used as well as the incorporation of the model predictions into an AUV trajectory planner. These results indicate a modest, but measurable, improvement in surfacing error when the model predictions are incorporated into the planner.

Humanitarianism or self-serving hypocrisy? : the provision of aid to South Africa under the Hawke-Keating and Howard governments

General perceptions of foreign aid commonly engender images of humanitarianism and altruism, whereby the humanitarian needs of the recipient of development assistance are of the utmost priority of the aid donor. However, the Australian governments led by Hawke, Keating and Howard often gave humanitarianism a low emphasis, frequently placing Australia’s own foreign policy and economic concerns at the forefront of aid allocation – often unashamedly. This self-interest met through aid meant that most was provided to Australia’s regional neighbourhood, neglecting some of the poorest, most struggling states, including South Africa. Other issues and events, including the Cold War, apartheid, terrorism and HIV/AIDS also affected Australia’s aid policy; mostly, they were used as excuses to limit aid to states like South Africa.

Discriminative optimisation of the figure of merit for phonetic spoken term detection

This work proposes to improve spoken term detection (STD) accuracy by optimising the Figure of Merit (FOM). In this article, the index takes the form of phonetic posterior-feature matrix. Accuracy is improved by formulating STD as a discriminative training problem and directly optimising the FOM, through its use as an objective function to train a transformation of the index. The outcome of indexing is then a matrix of enhanced posterior-features that are directly tailored for the STD task. The technique is shown to improve the FOM by up to 13% on held-out data. Additional analysis explores the effect of the technique on phone recognition accuracy, examines the actual values of the learned transform, and demonstrates that using an extended training data set results in further improvement in the FOM.

Helping someone with problem drinking: Mental health first aid guidelines - a Delphi expert consensus study

Background Alcohol is a leading risk factor for avoidable disease burden. Research suggests that a drinker's social network can play an integral role in addressing hazardous (i.e., high-risk) or problem drinking. Often however, social networks do not have adequate mental health literacy (i.e., knowledge about mental health problems, like problem drinking, or how to treat them). This is a concern as the response that a drinker receives from their social network can have a substantial impact on their willingness to seek help. This paper describes the development of mental health first aid guidelines that inform community members on how to help someone who may have, or may be developing, a drinking problem (i.e., alcohol abuse or dependence). Methods A systematic review of the research and lay literature was conducted to develop a 285-item survey containing strategies on how to help someone who may have, or may be developing, a drinking problem. Two panels of experts (consumers/carers and clinicians) individually rated survey items, using a Delphi process. Surveys were completed online or via postal mail. Participants were 99 consumers, carers and clinicians with experience or expertise in problem drinking from Australia, Canada, Ireland, New Zealand, the United Kingdom, and the United States. Items that reached consensus on importance were retained and written into guidelines. Results The overall response rate across all three rounds was 68.7% (67.6% consumers/carers, 69.2% clinicians), with 184 first aid strategies rated as essential or important by ≥80% of panel members. The endorsed guidelines provide guidance on how to: recognize problem drinking; approach someone if there is concern about their drinking; support the person to change their drinking; respond if they are unwilling to change their drinking; facilitate professional help seeking and respond if professional help is refused; and manage an alcohol-related medical emergency. Conclusion The guidelines provide a consensus-based resource for community members seeking to help someone with a drinking problem. Improving community awareness and understanding of how to identify and support someone with a drinking problem may lead to earlier recognition of problem drinking and greater facilitation of professional help seeking.

Simultaneous voltammetric determination of three herbicides in food and water samples with the aid of chemometrics

Differential pulse stripping voltammetry method(DPSV) was applied to the determination of three herbicides, ametryn, cyanatryn, and dimethametryn. It was found that their voltammograms overlapped strongly, and it is difficult to determine these compounds individually from their mixtures. With the aid of chemometrics, classical least squares(CLS), principal component regression(PCR) and partial least squares(PLS), voltammogram resolution and quantitative analysis of the synthetic mixtures of the three compounds were successfully performed. The proposed method was also applied to the analysis of some real samples with satisfactory results.

Charity law, advocacy and the aid/watch decision : compatibility of charitable purposes and political objects — the view from Australia

Introduction In 1952 the Nathan report stated that: Some of the most valuable activities of voluntary societies consist, however, in the fact that they may be able to stand aside from and criticize State action or inaction, in the interests of the inarticulate man in the street. Some 60 years later it remained the case that if a voluntary society wanted to gain or retain charitable status then, contrary to the Nathan report, the one thing it could not do was set itself up with the purpose of criticizing State action or inaction. This legal position was adopted by the authorities in Australia with the Australian Taxation Office (ATO) noting in Taxation Ruling TR2005/21: 102. An institution or fund is not charitable if its purpose is advocating a political party or cause, attempting to change the law or government policy, or propagating or promoting a particular point of view. So, why, if it is such a valuable activity, have governments steadfastly refused to allow charities to have as their purpose the freedom to advocate in this way and how has this situation been affected by the recent High Court of Australia decision in Aid/Watch v Commissioner of Taxation? This article proposes to address such questions. Beginning with some background history, it explains that, initially, the current constraints did not apply. Then it looks at the nature of these constraints: how does the law define what constitutes the type of political activity that a charity must not undertake? What is the rationale for prohibition? How has the judiciary contributed to the development of the law in this area in recent years? This will lead into a consideration of the Aid/Watch case and the implications arising from the recent final decision. The article concludes by reflecting on what has changed and why the view on this contentious matter now looks different from Australia.