Mekaanisen puunjalostuksen markkinakartoitus: Koivusahatavaran ja -puolijalosteiden markkinat Euroopassa

Tutkimuksen tavoitteena oli kartoittaa koivusahatavaran ja -puolijalosteiden potentiaalisia vientikohdemaita EU-maissa ja Norjassa. Tarkastelun kohteena olivat koivutuotteiden markkinapotentiaali ja kysyntä sekä puutuotteiden markkinointikanavavaihtoehdot Euroopan puutuotemarkkinoilla. Tutkimuksen teoreettisena lähtökohtana oli tarkastella, kuinka markkinointitutkimuksen avulla kartoitetaan tuotantohyödykemarkkinoita, miten määritetään tuotantohyödykkeen markkinapotentiaali ja kysyntä sekä mitä markkinointikanavavaihtoehtoja puutuotteita valmistavalla yrityksellä on vientimarkkinoille lähdettäessä. Empiirisessä osassa selvitettiin sekä kvantitatiivista että kvalitatiivista tietoa Euroopan puutuotemarkkinoista. Lehtipuu- ja koivusahatavaran vienti-, tuonti- ja tuotantotilastojen pohjalta tarkasteltiin koivun suurimpia vientikohdemaita ja arvioitiin kysyntää tulevaisuudessa. Tämän lisäksi puutuotteiden toimialaorganisaatioiden, asiantuntijoiden, puutuotteita valmistavien yritysten ja maahantuojien haastattelujen avulla muodostettiin kokonaiskuva koivusahatavaran ja -puolijalosteiden markkinapotentiaalista ja koivutuotteiden asemasta Euroopan puutuotemarkkinoilla. Koivu koettiin Euroopan puutuotemarkkinoilla kiinnostavana puulajina ja koivutuotteiden kysyntä onkin ollut viime vuosien aikana nousujohteista. Tämä johtuu suurimmaksi osaksi tällä hetkellä vallitsevasta vaaleiden puulajien trendistä. Markkinoilla menestyminen riippuu kuitenkin siitä, kuinka hyvin koivun tarjoaja pystyy vastaamaan asiakkaiden tuotteelle asettamiin vaatimuksiin.

Ulkomaisen pk-yrityksen teollisuusinvestointi Suomeen, Case Pariwood Case Pariwood.

Kuukauden kuluttua tästä päivästä voidaan sanoa: 'Viime vuosisadalla maapallo kutistui merkittävästi, kulkuyhteydet paransivat ihmisten ja tavaroiden liikkuvuutta, mutta ennen kaikkea tietoliikenteessä tapahtui valtava kehitys.' Rahamarkkinoiden integroituessa pääomien transaktiokustannukset lähentyvät vähitellen nollaa, jolloin voidaan puhua suprajohtavasta kapitalismista (Kasvio et al.1999). Tässä tutkimuksessa osoitan, että myös pienet ja keskisuuret yritykset voivat tehdä onnistuneita suoria sijoituksia ulkomaille, Pariwoodin tapauksessa Suomeen. Suomen hyvät kuusitukkivarat, puun laatu ja saatavuus, ovat päätekijöitä tähän investointiin. Kun yrittäjien motivaatio on riittävän korkea ja heillä on aikaa ja sitkeyttä ideansa toteuttamiseen, tulos on onnistunut. Edullinen taloussuhdanne Euroopassa Pariwoodin markkina-alueella on edistänyt hanketta. Kuntien harjoittamalla elinkeinopolitiikalla on merkitystä ja kunnat ja valtiovalta voivat hankekohtaisella aktiivisuudellaan edesauttaa tätä kehitystä. Kyse on myös luottamuksesta. Pariwoodin tapauksessa itävaltalaiset omistajat perustelivat investointipäätöstä myös Suomen infrastruktuurilla ja viranomaisten kanssa hyvin sujuneella yhteistyöllä. Sijoitusten allokoinnissa on myös kyse työstä, työpaikkojen syntymisestä tai pysymisestä siellä, missä kustannukset ovat edulliset tai työntekijöiden ammattitaito täyttää investoijien vaatimukset. Ulkomaisissa suorissa sijoituksissa Suomeen tulee paitsi rahaa, myös uudenlaista teollisuutta ja osaamista. Korkean teknologian tuotantoa on myös puualalla. Ulkomaiset omistajat edustavat usein erilaista johtamiskulttuuria, kuin mihin Suomessa ollaan totuttu. Pariwoodin tapauksessa suuria ongelmia ei esiintynyt. Suomen EU-jäsenyydellä on ollut tätäkin hanketta edistävä vaikutus. Rahoitus on järjestynyt samoin periaattein kuin kansallisissa hankkeissa. Rahoitusneuvottelut kestivät hieman pidempään, noin vuoden. Lopputulokseen ovat tyytyväisiä omistajat, Parikkalan kunnan edustajat, työntekijät ja luotonantajat. Pariwood käy esimerkistä onnistuneesta ulkomaisesta teollisuusinvestoinnista Suomeen.

Wood-derived biomaterials for biomedical applications

Driven by the global trend in the sustainable economy development and environmental concerns, the exploring of plant-derived biomaterials or biocomposites for potential biomedical and/or pharmaceutical applications has received tremendous attention. Therefore, the work of this thesis is dedicated to high-value and high-efficiency utilization of plant-derived materials, with the focus on cellulose and hemicelluloses in the field of biomedical applications in a novel biorefinery concept. The residual cellulose of wood processing waste, sawdust, was converted into cellulose nanofibrils (CNFs) with tunable surface charge density and geometric size through 2,2,6,6-tetramethylpiperidinyloxy (TEMPO)-mediated oxidation and mechanical defibrillation. The sawdust-based CNFs and its resultant free-standing films showed comparable or even better mechanical properties than those from a commercial bleached kraft pulp at the same condition, demonstrating the feasibility of producing CNFs and films thereof with outstanding mechanical properties from birch sawdust by a process incorporated into a novel biorefinery platform recovering also polymeric hemicelluloses for other applications. Thus, it is providing an efficient route to upgrade sawdust waste to valuable products. The surface charge density and geometric size of the CNFs were found to play key roles in the stability of the CNF suspension, as well as the gelling properties, swelling behavior, mechanical stiffness, morphology and microscopic structural properties, and biocompatibility of CNF-based materials (i.e. films, hydrogels, and aerogels). The CNFs with tunable surface chemistry and geometric size was found promising applications as transparent and tough barrier materials or as reinforcing additive for production of biocomposites. The CNFs was also applied as structural matrices for the preparation of biocomposites possessing electrical conductivity and antimicrobial activity by in situ polymerization and coating of polypyrrole, and incorporation of silver nanoparticles, which make the material possible for potential wound healing application. The CNF-based matrices (films, hydrogels, and aerogels) with tunable structural and mechanical properties and biocompatibility were further prepared towards an application as 3D scaffolds in tissue engineering. The structural and mechanical strength of the CNF matrices could be tuned by controlling the charge density of the nanocellulose, as well as the pH and temperature values of the hydrogel formation conditions. Biological tests revealed that the CNF scaffolds could promote the survival and proliferation of tumor cells, and enhance the transfection of exogenous DNA into the cells, suggesting the usefulness of the CNF-based 3D matrices in supporting crucial cellular processes during cell growth and proliferation. The CNFs was applied as host materials to incorporate biomolecules for further biomedical application. For example, to investigate how the biocompatibility of a scaffold is influenced by its mechanical and structural properties, these properties of CNF-based composite matrices were controlled by incorporation of different hemicelluloses (O-acetyl galactoglucomanan (GGM), xyloglucan (XG), and xylan) into CNF hydrogel networks in different ratios and using two different approaches. The charge density of the CNFs, the incorporated hemicellulose type and amount, and the swelling time of the hydrogels were found to affect the pore structure, the mechanical strength, and thus the cells growth in the composite hydrogel scaffolds. The mechanical properties of the composite hydrogels were found to have an influence on the cell viability during the wound healing relevant 3T3 fibroblast cell culture. The thusprepared CNF composite hydrogels may work as promising scaffolds in wound healing application to provide supporting networks and to promote cells adhesion, growth, and proliferation.

Post-processing and visualization techniques in 2D boundary element analysis

Most post-processors for boundary element (BE) analysis use an auxiliary domain mesh to display domain results, working against the profitable modelling process of a pure boundary discretization. This paper introduces a novel visualization technique which preserves the basic properties of the boundary element methods. The proposed algorithm does not require any domain discretization and is based on the direct and automatic identification of isolines. Another critical aspect of the visualization of domain results in BE analysis is the effort required to evaluate results in interior points. In order to tackle this issue, the present article also provides a comparison between the performance of two different BE formulations (conventional and hybrid). In addition, this paper presents an overview of the most common post-processing and visualization techniques in BE analysis, such as the classical algorithms of scan line and the interpolation over a domain discretization. The results presented herein show that the proposed algorithm offers a very high performance compared with other visualization procedures.

Stone-ground wood pulp-reinforced polypropylene composites: water uptake and thermal properties

Two of the drawbacks of using natural-based composites in industrial applications are thermal instability and water uptake capacity. In this work, mechanical wood pulp was used to reinforce polypropylene at a level of 20 to 50 wt. %. Composites were mixed by means of a Brabender internal mixer for both non-coupled and coupled formulations. Differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) were used to determine the thermal properties of the composites. The water uptake behavior was evaluated by immersion of the composites in water until an equilibrium state was reached. Results of water absorption tests revealed that the amount of water absorption was clearly dependent upon the fiber content. The coupled composites showed lower water absorption compared to the uncoupled composites. The incorporation of mechanical wood pulp into the polypropylene matrix produced a clear nucleating effect by increasing the crystallinity degree of the polymer and also increasing the temperature of polymer degradation. The maximum degradation temperature for stone ground wood pulp–reinforced composites was in the range of 330 to 345 ºC

Value added logistics in supply and demand chains. Smile. Part 1. eBusiness between global company and itslocal sme supplier network

VALOSADE (Value Added Logistics in Supply and Demand Chains) is the research project of Anita Lukka's VALORE (Value Added Logistics Research) research team inLappeenranta University of Technology. VALOSADE is included in ELO (Ebusiness logistics) technology program of Tekes (Finnish Technology Agency). SMILE (SME-sector, Internet applications and Logistical Efficiency) is one of four subprojects of VALOSADE. SMILE research focuses on case network that is composed of small and medium sized mechanical maintenance service providers and global wood processing customers. Basic principle of SMILE study is communication and ebusiness insupply and demand network. This first phase of research concentrates on creating backgrounds for SMILE study and for ebusiness solutions of maintenance case network. The focus is on general trends of ebusiness in supply chains and networksof different industries; total ebusiness system architecture of company networks; ebusiness strategy of company network; information value chain; different factors, which influence on ebusiness solution of company network; and the correlation between ebusiness and competitive advantage. Literature, interviews and benchmarking were used as research methods in this qualitative case study. Networks and end-to-end supply chains are the organizational structures, which can add value for end customer. Information is one of the key factors in these decentralized structures. Because of decentralization of business, information is produced and used in different companies and in different information systems. Information refinement services are needed to manage information flows in company networksbetween different systems. Furthermore, some new solutions like network information systems are utilised in optimising network performance and in standardizingnetwork common processes. Some cases have however indicated, that utilization of ebusiness in decentralized business model is not always a necessity, but value-add of ICT must be defined case-specifically. In the theory part of report, different ebusiness and architecture models are introduced. These models are compared to empirical case data in research results. The biggest difference between theory and empirical data is that models are mainly developed for large-scale companies - not for SMEs. This is due to that implemented network ebusiness solutions are mainly large company centered. Genuine SME network centred ebusiness models are quite rare, and the study in that area has been few in number. Business relationships between customer and their SME suppliers are nowadays concentrated more on collaborative tactical and strategic initiatives besides transaction based operational initiatives. However, ebusiness systems are further mainly based on exchange of operational transactional data. Collaborative ebusiness solutions are in planning or pilot phase in most case companies. Furthermore, many ebusiness solutions are nowadays between two participants, but network and end-to-end supply chain transparency and information systems are quite rare. Transaction volumes, data formats, the types of exchanged information, information criticality,type and duration of business relationship, internal information systems of partners, processes and operation models (e.g. different ordering models) differ among network companies, and furthermore companies are at different stages on networking and ebusiness readiness. Because of former factors, different customer-supplier combinations in network must utilise totally different ebusiness architectures, technologies, systems and standards.

Research of wood fuel market in North-West of Russia

The main purposes of this study are analyzing of forest sector of North-West and research of potentials of wood fuel market in this region. Research is focused on definition of the most perspective areas for export of wood fuel: logging residues, industrial wood processing residues, pellets and briquettes. Russian wood energy industry is very young in comparison with European countries. Nowadays there are no support and serious attention from the government to this sector. Hence almost all wood fuel market is oriented to the Western Europe. Export of wood fuel is dominated over the internal consumption. Pellet production in North –West is rapidly growing. Despite internal market has been developed the lion's share of pellets goes to export. Part of industrial wood processing residues is used by producers for their own goals, part goes to the export and rest of them is not used at all. Logging residues as raw materials for fuel have great potentials; most of them are left in a forest. Special techniques for their processing are too expensive for Russian entrepreneur. Some parts of North –West, which are situated close to the border with European countries, are potential for export. Political, economical and logistical challenges are complicated facilities for foreign customer to purchase wood fuel in remote parts of North-West. However some decisions for solving this problem exist and Russian manufactures are still interested in export of their products.

Factors affecting the usability of aspen (Populus tremula) wood dried at different temperature levels

In this dissertation the main aim was to study the usability of aspen wood in the mechanical wood processes, especially the factors that affect the usability of aspen wood, which is dried at different temperature levels. The problematic of varying temperatures from level to another seem to have significant effects on distortions. According to the studies conducted, many practical solutions for drying of aspen timber can be made. European aspen sawn timber should be dried in relatively narrow widths, short lengths, edged and sawn pith free. The results achieved give an interesting view for the distortions of aspen wood between HT drying and heat treatment. The most significant result is that cupping seems to decrease when increasing temperature level from HT drying to heat treatment phase. The difference is significant. Other very obvious result is that bow and crook are increasing between these two temperature levels, bow significantly. Also the modelling gives a good background for this result since cupping is reduced by higher temperatures. It can also be assumed that these distortions can be affected for example by sorting out the timber used to different moisture levels before drying. This could be a very simple solution for practical purposes. From practical point of view, it was also noted during the drying tests performed that the discoloration seem to be no problem for aspen boards dried in temperatures under 150 °C. Altogether, this dissertation covers many interesting points of view of factors affecting distortions of wood in different temperature stages. Aspen as species in use of mechanical wood industries seems to be a species suitable for component production. According to the results, the best yield from aspen timber can be achieved in industry that can utilize relatively short components of sawn wood. Results achieved give a significant indication about the factors affecting distortions of wood at different temperature stages of drying, especially considering European aspen.

Economy of converting wood to biocoal

The pre-treatment step has a significant influence on the performance of bioenergy chains, especially on logistics. In nowadays conditions it is important to have technologies allowing to convert biomass at modest scales into dense energy carriers that ease transportation and handling. There are such technologies as charring and torrefaction. It is a thermal treatment of organic waste (only woody biomass is considered as a raw material in this work), which aims to produce a fuel with increased energy density. Wood processing is attractive under meaning of green house gas emissions. Charring and torrefaction are promising technologies due to its high process efficiency. It may be also attractive in the future as a renewable fuel with improved storage properties, increased energy density (compared to raw wood) for co-combustion and/or gasification.

Desempenho de tractores florestais processadores

A time-and-motion study in wood processing of the Eucalyptus harvester's operational cycle was developed. The objective was to evaluate wood harvesters working under several site conditions. The research includes two kinds of harvesters while processing wood to supply paper and cellulose factories, as follows: a machine with twin tires and other one with large tracks, both connected to a different head harvester models. The forestry species were Eucalyptus saligna Smith and Eucalyptus grandis Hill ex Maiden, seven and eight years old, in slope terrains ranging from 0% to 10% degrees, under harvesting systems used by Votorantim and Suzano forestry companies, in São Paulo State, Brazi. Considering all field research, results disclosed that, for some conditions, both machines have shown mathematical correlation between some mechanical wood operation within the processing operational cycle and the saw logs production. All the mathematical correlations were found to express logarithmical models.

Chemical composition changes in eucalyptus and pinus woods submitted to heat treatment

This study investigated the influence of heat treatment on the chemical composition of Eucalyptus saligna and Pinus caribaea var. hondurensis woods to understand its role in wood processing. E. saligna and P. caribaea var. hondurensis woods were treated in a laboratorial electric furnace at 120, 140, 160 and 180 degrees C to induce their heat treatment. The chemical composition of the resulting products and those from original wood were determined by gas chromatography. Eucalyptus and Pinus showed a significant reduction in arabinose, manose, galactose and xylose contents when submitted to increasing temperatures. No significant alteration in glucose content was observed. Lignin content, however, increased during the heat process. There was a significant reduction in extractive content for Eucalyptus. On the other hand, a slight increase in extractive content has been determined for the Pinus wood. and that only for the highest temperature. These different behaviors can be explained by differences in chemical constituents between softwoods and hardwoods. The results obtained in this study provide important information for future research and utilization of thermally modified wood. (c) 2008 Elsevier Ltd. All rights reserved.

Preparation and characterisation of biodegradable starch-based nanocomposite materials

Different formulations of biodegradable starch-polyester blend nanocomposite materials have been film blown on a pilot scale film blowing tower. The physical properties of different films have been examined by thermal and mechanical analysis and X-ray diffraction. The results show that the addition of an organoclay (from 0 to 5 wt%) significantly improves both the processing and tensile properties over the original starch blends. Wide angle X-ray diffraction (WAXD) results indicate that the best results were obtained for 30wt% starch blends, and the level of delamination depends on the ratio of starch to polyester and amount of organoclay added. The crystallisation temperature of the nanocomposite blends is significantly lower than the base blend. This is probably due to the platelets inhibiting order, and hence crystallisation, of the starch and polyester. The mechanical and thermal properties of the blends are also sensitive to the way the clay particles are dispersed. (C) 2003 Society of Chemical Industry.

Kuorimon automaatiojärjestelmän optimointi

Työn tavoitteena oli pienentää kuorinnassa syntyviä puuhäviöitä ja parantaa linjan käytettävyyttä nykyaikaisella puunkuorimolla. Tavoitteet toteutettiin automaatiojärjestelmään tehdyillä muutoksilla. Rumpukuorintaprosessi on säilynyt pitkään samanlaisena. Viime vuosina on markkinoille tullut uusia älykkäitä mittalaitteita ja optimointiin kykeneviä säätöjärjestelmiä. Uudenlaisella automaatiotekniikalla on mahdollista mitata kuorintatulosta ja kuorinnassa syntyneitä puuhäviöitä reaaliaikaisesti. Laaduntarkkailun lisäksi tietoja hyödynnetään kuorintaprosessin automaattisessa ohjauksessa. Optimaalisen kuorintatuloksen saavuttaminen edellyttää virheetöntä automaation toimintaa ja tarkkaa viritystä säädöiltä. Työssä perehdyttiin kuorimon perusautomaatioon ja ylemmän tason säädön toimintaan. Prosessinohjauksessa havaitut ongelmakohdat korjattiin. Lopputuloksena saatiin vakiokuorintatehon malli, joka pienentää puuhäviöitä ja parantaa linjaston käytettävyyttä. Saaduilla tuloksilla on merkittävä taloudellinen arvo, ja menetelmät ovat hyödynnettävissä myös toisilla rumpukuorimoilla.

Vaihtoehtoalkalit mekaanisen massan peroksidivalkaisussa

Tehokkain tapavalkaista mekaanisesti kuidutettua puumassaa on suorittaa se hapettavasti peroksidikemikaalilla vahvasti alkalisissa oloissa. Perinteisesti alkalisuus on aikaansaatu natriumhydroksidin ja -silikaatin avulla. Se kuitenkin liuottaa massasta merkittävästi ligniiniä, mikä huonontaa saantoa ja suurentaa valkaisun jätevesien orgaanisen hiilen määrää sekä kemiallista hapenkulutusta. Yhä kovenevien vaaleustavoitteiden ja tiukentuneen vedenkäytön seurauksena on syntynyt tarve etsiä parempia valkaisun alkaleja. Kirjallisuuden pohjalta valittiinkokeellisesti tutkittaviksi alkaleiksi magnesiumhydroksidi, magnesiumoksidi, kalsiumhydroksidi sekä kalsiumoksidi. Niiden toimivuutta hapettavan vetyperoksidivalkaisun alkaleina tutkittiin valkaisukokein natriumsilikaattilisäyksen kanssa sekä ilman. Näistä parhaiten toimivaksi osoittautui Mg(OH)2. Sen avulla suoritettiin jatkoksi laboratoriokoevalkaisuja korkeassa sakeudessa. Keski- ja korkeasakeusvalkaisukokeiden tulosten mukaan käytettäessä Mg(OH)2 -alkalia natriumydroksidin ja -silikaatin asemesta jää massan loppuvaaleus noin yhden ISO-prosentin verran heikommaksi. Tällöin valkaisusuodoksessa oli vain varsin vähäinen määrä massasta liuennutta orgaanista hiiliainesta, noin 45 % siitä, mitä natriumin yhdisteiden käyttö vertailukokeessa tuotti. Tulosta varmennettiin suorittamalla korkea-sakeusvalkaisukokeita hiokemassatehtaan olosuhteissa, massoilla ja kiertovesillä.Myös tehdaskokeiden mukaan valkaistun massan loppuvaaleus jää noin yhden ISO-prosentin alhaisemmaksi, mutta valkaisusuodoksen orgaanisen hiilen määrä (TOC) jääalle puoleen Na-kemikaalein suoritetusta vertailukokeesta.

Lähtevien kotimaankuljetusten kehittäminen ja organisointi Puunjalostusyrityksessä

Työn tavoitteena oli selvittää lähtevien kotimaankuljetusten nykytila ja kehit-tämisvaihtoehdot, sekä tutkia mahdollisuutta keskittää kuljetusjärjestelmä. Ensin selvitettiin kuljetusten nykytilan haastattelujen sekä saatavilla olevan materiaalin avulla. Henkilöstön haastattelut toteutettiin henkilökohtaisesti. Toisessa vaiheessa määriteltiin kehittämiskohteet nykytilaselvityksen sekä kuljetusten kehittämistä käsittelevän kirjallisuuden avulla. Selvimpinä epäkohtina pidettiin vähäistä tulosyksiköiden yhteistoimintaa, yhteisen logistiikka-strategian ja toimintapolitiikan puuttumista sekä puutteellista seurantajärjestelmää. Ongelmaksi koettiin myös kuljetusliikkeiden ylikapasiteetin aiheuttamat vaikutukset kuljetushintoihin.Kolmannessa vaiheessa tutkittiin mahdollisuutta siirtyä nykyisestä hajautetusta kuljetusjärjestelmästä keskitettyyn. Selvityksessä käytettiin apuna keskitetyn kuljetusjärjestelmän hypoteettisia ratkaisuvaihtoehtoja. Toimenpide-ehdotuksina esitetään yhteisen logistiikkastrategian laatimista, yksiköiden toimintapolitiikkojen yhdenmukaistamista, sekä tulosyksiköiden yhteistoimintaa kehittävän työryhmän perustamista.