Le développement des proportions métaphysaires chez les hominoïdes : croissance et influence de la locomotion

Dans le cadre de ce mémoire, les relations entre morphologie, locomotion et croissance chez les hominoïdes sont analysées sous l'angle des proportions métaphysaires et de leur acquisition. Plusieurs niveaux d'analyse — intermembre, supérieur et inférieur — sont abordés dans une perspective ontogénique. La masse corporelle et la direction des charges influencent la morphologie des surfaces articulaires et métaphysaires mais aussi leur développement. Les charges étant dépendantes du mode locomoteur et celui-ci se modifiant en fonction de l'âge, on tente de voir à quel(s) moment(s) les changements proportionnels ont lieu et pourquoi ils apparaissent. Des mesures linéaires ont été recueillies sur l'humérus, le radius, le fémur et le tibia sur un échantillon squelettique des espèces H. sapiens, P. troglodytes, G. gorilla et P. pygmaeus. À partir de ces mesures et du calcul de certains ratios, des comparaisons intra et interspécifiques ont été réalisées. Les différences les plus significatives entre les espèces se dévoilent au niveau intermembre et sont relatives aux différents pourcentages d'utilisation des membres supérieurs ou inférieurs. Au sein des espèces, les résultats révèlent une similarité dans les réactions des surfaces métaphysaires au niveau intermembre, supérieur et inférieur. Les changements proportionnels ont lieu entre les stades 0 et 1 pour H. sapiens (première marché indépendante), entre les stades 2 et 4 pour P. troglodytes (majorité du poids corporel soutenue par les membres inférieurs) et entre les stades 3 et 5 pour G. gorilla (taille adulte et quadrupédie très majoritaire). Pour P. pygmaeus aucun stade en particulier n'a été ciblé par les analyses et cela concorde avec l'homogénéité de ses modes de locomotion employés au cours de la vie. Les différences proportionnelles répondent à des changements locomoteurs majeurs. Australopithecus afarensis est intermédiaire entre H. sapiens et les grands singes pour de nombreuses comparaisons. Au niveau du genou, les plus jeunes individus A. afarensis ne montrent pas de morphologie bipède, similaire aux humains.

Acellular dermal matrix as a barrier in guided bone regeneration: a clinical, radiographic and histomorphometric study in dogs

Objectives The purpose of this study was to evaluate the effectiveness of the acellular dermal matrix (ADM) as a membrane for guided bone regeneration (GBR), in comparison with a bioabsorbable membrane. Material and methods In seven dogs, the mandibular pre-molars were extracted. After 8 weeks, one bone defect was surgically created bilaterally and the GBR was performed. Each side was randomly assigned to the control group (CG: bioabsorbable membrane made of glycolide and lactide copolymer) or the test group (TG: ADM as a membrane). Immediately following GBR, standardized digital X-ray radiographs were taken, and were repeated at 8 and 16 weeks post-operatively. Before the GBR and euthanasia, clinical measurements of the width and thickness of the keratinized tissue (WKT and TKT, respectively) were performed. One animal was excluded from the study due to complications in the TG during wound healing; therefore, six dogs remained in the sample. The dogs were sacrificed 16 weeks following GBR, and a histomorphometric analysis was performed. Area measurements of new tissue and new bone, and linear measurements of bone height were performed. Results Post-operative healing of the CG was uneventful. In the TG membrane was exposed in two animals, and one of them was excluded from the sample. There were no statistically significant differences between the groups for any histomorphometric measurement. Clinically, both groups showed an increase in the TKT and a reduction in the WKT. Radiographically, an image suggestive of new bone formation could be observed in both groups at 8 and 16 weeks following GBR. Conclusion ADM acted as a barrier in GBR, with clinical, radiographic and histomorphometric results similar to those obtained with the bioabsorbable membrane. To cite this article:Borges GJ, Novaes AB Jr, de Moraes Grisi MF, Palioto DB, Taba M Jr, de Souza SLS. Acellular dermal matrix as a barrier in guided bone regeneration: a clinical, radiographic and histomorphometric study in dogs.Clin. Oral Impl. Res. 20, 2009; 1105-1115.

A simple and non-destructive model for individual leaf area estimation in citrus

Introduction. Leaf area is often related to plant growth, development, physiology and yield. Many non-destructive models have been proposed for leaf area estimation of several plant genotypes, demonstrating that leaf length, leaf width and leaf area are closely correlated. Thus, the objective of our study was to develop a reliable model for leaf area estimation from linear measurements of leaf dimensions for citrus genotypes. Materials and methods. Leaves of citrus genotypes were harvested, and their dimensions (length, width and area) were measured. Values of leaf area were regressed against length, width, the square of length, the square of width and the product (length x width). The most accurate equations, either linear or second-order polynomial, were regressed again with a new data set; then the most reliable equation was defined. Results and discussion. The first analysis showed that the variables length, width and the square of length gave better results in second-order polynomial equations, while the linear equations were more suitable and accurate when the width and the product (length x width) were used. When these equations were regressed with the new data set, the coefficient of determination (R(2)) and the agreement index 'd' were higher for the one that used the variable product (length x width), while the Mean Absolute Percentage Error was lower. Conclusion. The product of the simple leaf dimensions (length x width) can provide a reliable and simple non-destructive model for leaf area estimation across citrus genotypes.

A modified approach for vestibuloplasty in severely resorbed mandible using an implant-retained postoperative stent: a case report

Background. Severely resorbed mandibles often present a short band of keratinized tissue associated with a shallow vestibule. As a result, prominent muscle insertions are present, especially in the mental region of the mandible. This case report describes the deepening of the vestibular sulcus in an atrophic mandible by combining free gingival grafts harvested from the palate and a postoperative acrylic resin stent screwed on osseointegrated implants placed at the anterior region of the mandible.Study design. During the second-stage surgery, a split-thickness labial flap was reflected and apically sutured onto the periosteum. Two free gingival grafts were obtained and then sutured at this recipient site. A previously custom-made acrylic stent was then screwed onto the most distally positioned implants. To document the procedure's stability over time, a metal ball was placed in the most apical part of the vestibule and standardized cephalometric radiographs were taken before and 6 months after the procedure. Linear measurements of vestibular depths over the observation time were realized using specific software for radiographic analysis.Results. The proposed technique augmented the band of attached masticatory mucosa, deepened the vestibule and prevented the muscle reinsertion. The difference between the 2 measurements of vestibular depths was 9.39 mm (initial 20.88 mm, final 11.49 mm) after a 6-month postoperative period.Conclusion. The technique, in combination with palatal mucosal graft and use of a postoperative stent, decreased the pull of mentalis muscle and provided a peri-implantally stable soft tissue around implants. (Oral Surg Oral Med Oral Pathol Oral Radiol Endod 2008; 106: e7-e14)

Avaliação radiográfica do comportamento dos terceiros molares inferiores em pacientes tratados ortodonticamente com e sem extrações de primeiros pré-molares

OBJETIVO: o presente trabalho objetivou avaliar as alterações ocorridas nas posições dos terceiros molares inferiores em pacientes tratados ortodonticamente com extrações dos primeiros pré-molares. METODOLOGIA: utilizou-se 80 ortopantomografias, obtidas no pré e pós-tratamento ortodôntico corretivo de 40 pacientes, divididos em dois grupos. O grupo 1 constou de 20 pacientes (13 femininos e 7 masculinos) que se submeteram a tratamento ortodôntico com extrações de primeiros pré-molares. O grupo 2 foi constituído por 20 pacientes (13 femininos e 7 masculinos) tratados ortodonticamente sem extrações. Foram estabelecidas medidas angulares, com o objetivo de avaliar as inclinações e medidas lineares, para analisar as modificações no sentido vertical dos terceiros molares. Todos os dados foram mensurados duas vezes, cujos valores médios foram submetidos dos testes t emparelhado e teste t independente. RESULTADOS: os resultados mostraram diferenças estatisticamente significantes (p<0,01) entre as medidas angulares finais e iniciais do grupo 1. CONCLUSÕES: concluiu-se que os deslocamentos verticais dos terceiros molares inferiores são semelhantes nos casos tratados ortodonticamente com e sem extrações e que estes elementos dentários tornam-se mais verticalizados ao final da terapia realizada com extrações de primeiros pré-molares inferiores.

O efeito da retração dos dentes anteriores sobre o ponto A em pacientes submetidos ao tratamento ortodôntico corretivo

OBJETIVO: avaliar o efeito da retração anterior sobre o ponto A sagital e verticalmente, bem como a correlação e a previsibilidade do comportamento dessas estruturas. METODOLOGIA: sessenta telerradiografias em norma lateral foram usadas, tomadas no início e no final do tratamento ortodôntico corretivo, a partir de 30 pacientes (22 feminino e 8 masculino) com idade entre 10 e 17 anos antes do tratamento, com má oclusão de Classe II, divisão 1 ou Classe I, que foram submetidos às extrações dos quatro primeiros pré-molares ou somente dois primeiros pré-molares superiores. Além das variáveis .1NA,1-NA, 1.PP e 1-A, mensurações lineares horizontais e verticais foram feitas em relação a uma linha de referência construída a partir da linha SN menos 7º e uma linha perpendicular a ela. Todos os dados foram mensurados duas vezes, e as médias foram submetidas ao teste t emparelhado, de correlação linear e de regressão. RESULTADOS: em média, o ponto A retraiu 0,71mm e movimentou para baixo 2,38mm, seguindo 1,03mm e 4,13mm de retração, respectivamente, do ápice radicular e da borda incisal, e 2,35mm de extrusão dentária. A retração do ponto A apresentou correlação positiva em relação ao ápice radicular (r = 0,75; alfa < 0,0001) e em relação à retração da borda incisal (r = 0,70; alfa < 0,0001), mostrando um comportamento ântero-posterior previsível. CONCLUSÕES: concluiu-se que o ponto A retraiu-se e movimentou-se para baixo seguindo o dente, e a retração do ponto A em relação aos incisivos foi previsível.

Evaluating craniofacial asymmetry with digital cephalometric images and cone-beam computed tomography

Introduction: The aim of this study was to evaluate craniofacial asymmetry by using 2-dimensional (2D) poster-oanterior cephalometric images, 3-dimensional cone-beam computed tomography (CBCT), and physical measurements (gold standard). Methods: Ten dry human skulls were assessed, and radiopaque markers were placed on 17 skeletal landmarks. Twenty linear measurements were taken on each side to compare the right and left sides and to compare these measurements with the physical measurements made with a digital caliper. To acquire the 2D posteroanterior radiographs, an Extraoral Phosphor Storage Plate (Air Techniques, Chicago, Ill) was used as the image receptor with a Eureka x-ray-Duocon Machlett unit (Machlett Laboratores, Chicago, Ill). Three-dimensional imaging data were acquired from a CB MercuRay (Hitachi Medical, Tokyo, Japan). Results: on average, the right side was larger than the left for most of the 20 distances evaluated in the digital 2D and the CBCT images, and there was poor agreement between the digital 2D images and the physical measurements (kappa = 0.0609) and almost perfect agreement (kappa = 0.92) between the CBCT and physical measurements when individual measurements were considered. Conclusions: Human skulls, with no apparent asymmetry, had some differences between the right and left sides, with dominance for the right side but with no clinical significance. CBCT can better evaluate craniofacial morphology when compared with digital 2D images. (Am J Orthod Dentofacial Orthop 2011; 139: e523-e531)

Métodos para estimativa da area foliar de plantas daninhas: 4 , Cassia tora L.

O trabalho analisa as possibilidades das estimativas das áreas (9) de folíolos do ápice, meio e base de folhas de Cassia tora L., através das equações lineares (Y = A + BX ) e (Y = BX), geométricas ou potenciais (Y= A XB ) e exponenciais (Y = ABX ). O valor de X e tomado das medidas lineares do folíolo, a saber: comprimento da nervura principal (C) , largura máxima perpendicular à nervura principal (L) ou o produto C.L. A análise de 360 folíolos mostra que as áreas podem ser estimadas de maneira proporcional ao retângulo C x L. Os coeficientes de correção foram 0,6711 para os foliolos do ápice, 0,7404 para as medianas e 0,7759 para as da base. Houve diferenças estatisticamente significativas entre os coeficientes, não sendo possível estabelecer-se um único coeficiente para os três folíolos.

A influência da redução do espaço nasofaringeano na morfologia facial de pré-adolescentes

A redução do espaço nasofaringeano devido à hipertrofia adenoideana leva a adaptações posturais da cabeça, mandíbula, língua e lábios, podendo causar alterações no padrão esquelético facial. Foram coletadas 98 teleradiografias em norma lateral de pré-adolescentes na faixa etária de 7 a 10 anos na Clínica de Ortodontia da F.O. Araraquara, as quais foram selecionadas levando-se em consideração a dimensão da imagem do espaço nasofaringeano (ENF) (correspondente à menor distância do dorso do palato mole à parede faringeana posterior). As radiografias foram divididas em 3 grupos: Grupo I (estreito), ENF entre 1,7 e 5,1mm; Grupo II (médio), ENF entre 5,2 e 7,6mm; Grupo III (amplo), ENF entre 7,7 e 12,9mm. Utilizamos duas medidas angulares e seis medidas lineares para caracterizar a morfologia facial. As médias e o desvio padrão de cada medida efetuada foram obtidas, e por meio de teste de análise de variância (ANOVA), verificou-se diferença não significativa entre os grupos para as variáveis: ANperp, p=0,07; PgNperp, p=0,058, comprimento mandibular, p=0,15, comprimento maxilar, p=0,06, diferença maxilomandibular, p=0,98, eixo facial, p=0,96, altura facial inferior, p=0,84 e significativa na variável plano mandibular (p<0,01). Portanto, a redução do espaço nasofaringeano está associada a alterações no plano mandibular, que apresentou valores maiores com a diminuição do espaço nasofaringeano.

Evolução do peso corporal e desenvolvimento da mandíbula de ratos em função da administração de flúor.

The body weights evolution and the development of mandible were analyzed in rats that received 0.25 mg F contained into a commercial product, during 30 and 60 days consecutively, beginning at birth. The study presented the following conclusions: 1. The treated animals showed body weights always inferior to the controls, with more evident difference at 60 days period; 2. Analysis showed a reduction in the horizontal linear measurements, but not in the length of the mandibular diastem. No influence was observed in relation to the verticals.

Craniometria em cães (Canis familiaris). Aspectos em crânios mesaticéfalos

In this study, a total of 25 skulls of the adult, mongrel and mesaticephalics dogs were used. Craniometric measurements for different parts of the skull were made. Cephalic indices and ratios were calculated. Certain points and landmarks on the skull are recognized in making linear measurements and are inion, bregma, nasion, prosthion, pogonion, basion, euryon, and zygion. Skull height (41,92 mm ± 3,9), skull length (177,72 mm ± 16,22), neurocranium (96,84 mm ± 7,25), viscerocranial (79,24 mm ± 8,72), basal length (140,24 mm ± 12,21), condylobasal (149,32 mm ± 12,21), snout (69,84 mm ± 7,07), nasals (50,08 mm ± 6,77), mandibular (129,88 mm ± 16,3), and of palatal (76,84 mm ± 7,01); width of neurocranium (62,24 mm ± 3,8), and zygomatic (95,44 mm ± 7,85) were obtained. Therefore, were calculated cranial index (53,83 mm ± 3,36), neurocranium (64,48 mm ± 4,69), facial (121,06 mm ± 9,18), basal (44,64 mm ± 4,17), width of the jugular processes (41 mm ± 4,2), of occipital condyles (35,48 mm ± 3,21), and of the foramen magnum (17,48 mm ± 2,27); height of the occipital triangle (38,28 mm ± 3,35), of the foramen magnum (14,36 mm ± 1,07); length of the dorsal notch (16,1 mm ± 1,12), and foramen magnum index (83,71 mm ± 14,44). Although with some differences in measurements, no significant difference was observed between the dimensions and reported to mesaticephalic skulls.

Exatidão, precisão e reprodutibilidade de medidas dentárias em modelos de gessso e imagem tridimensional

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Comportamento radiográfico dos terceiros molares inferiores em pacientes tratados ortodonticamente com e sem extrações de primeiros pré-molares

Pós-graduação em Odontologia - FOA

Avaliação tomográfica tridimensional do tratamento da classe II divisão 1 com aparelho de Herbst

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Efeitos da retração dentária sobre o ponto A em pacientes submetidos ao tratamento ortodôntico

Pós-graduação em Odontologia - FOA