Device oriented statistical modeling method for process variability in 45nm analog CMOS technology

With the rapid scaling down of the semiconductor process technology, the process variation aware circuit design has become essential today. Several statistical models have been proposed to deal with the process variation. We propose an accurate BSIM model for handling variability in 45nm CMOS technology. The MOSFET is designed to meet the specification of low standby power technology of International Technology Roadmap for Semiconductors (ITRS).The process parameters variation of annealing temperature, oxide thickness, halo dose and title angle of halo implant are considered for the model development. One parameter variation at a time is considered for developing the model. The model validation is done by performance matching with device simulation results and reported error is less than 10%.© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.

Comparison of North American universities with and without medical schools and their technology transfer initiatives

Empirical research available on technology transfer initiatives is either North American or European. Literature over the last two decades shows various research objectives such as identifying the variables to be measured and statistical methods to be used in the context of studying university based technology transfer initiatives. AUTM survey data from years 1996 to 2008 provides insightful patterns about the North American technology transfer initiatives, we use this data in our paper. This paper has three sections namely, a comparison of North American Universities with (n=1129) and without Medical Schools (n=786), an analysis of the top 75th percentile of these samples and a DEA analysis of these samples. We use 20 variables. Researchers have attempted to classify university based technology transfer initiative variables into multi-stages, namely, disclosures, patents and license agreements. Using the same approach, however with minor variations, three stages are defined in this paper. The first stage is to do with inputs from R&D expenditure and outputs namely, invention disclosures. The second stage is to do with invention disclosures being the input and patents issued being the output. The third stage is to do with patents issued as an input and technology transfers as outcomes.

The impact of government policy on technology transfer: An aircraft industry case study

This case study explores the interaction between domestic and foreign governmental policy on technology transfer with the goal of exploring the long-term impacts of technology transfer. Specifically, the impact of successive licensing of fighter aircraft manufacturing and design to Japan in the development of Japan's aircraft industry is reviewed. Results indicate Japan has built a domestic aircraft industry through sequential learning with foreign technology transfers from the United States, and design and production on domestic fighter aircraft. This process was facilitated by governmental policies in both Japan and the United States. Published by Elsevier B.V.

Apertura comercial y cambio tecnológico en el Istmo Centroamericano

Incluye Bibliografía

International migration, capital flows and the global economy: a long run view

Includes bibliography

Climate change: selected economic dimensions

Includes bibliography

Secundary school profile in science and technology versus the first year at the Technical University of Madrid. Cause of failure or quitting?

Se analiza el absentismo, el fallo y el abandono de los estudiantes en los primeros semestres del grado sobre la base de su formación en la educación secundaria.

Technology transfer under China’s economic reforms:business environment and success factors

The opening up of the Chinese economy and the associated transfer of technology from abroad have been taking place at an accelerating pace. Technology is crucial to China's industrial development. It is a productive resource and has a vital role in the process of economic and social development. This article provides an overview of technology transfer into China, focusing on recent developments, and examines the macroenvironmental and microenvironmental influences which foreign enterprises must consider when making investments or technology transfer decisions. Cases of companies engaged in international technology transfer are used to illustrate the discussion on the microenvironment. To be successful, foreign investors and suppliers of technology must respond to China's industrial priorities and pursue projects that are compatible with the country's broad policy goals as well as the corporate objectives of Chinese partners. The article concludes by listing a number of points to which attention should be paid before a decision is made to transfer technology to China.

From transferred technology to technological capability:a framework for examining the acquisition of technological capability by Chinese enterprises

This paper conceptualises the enhancement of technological capability by firms, following international technology transfer, as an evolutionary process. During this process, the existing technological, managerial and other complementary resources may require restructuring. Since China is in transition from central planning to market orientation, the organisational and managerial practices of Chinese firms are different from those of international technology suppliers. Resourcebased and evolutionary theories of the firm, which provide insights into the evolution of structures, mechanisms, skills, experiences and technical know-how, have been applied to outline the processes of acquiring technological capability. Selected case studies have been used to illustrate the issues and the framework provides guide for further empirical work.

How can flexible learning centres use social networking to improve their ongoing educational assessments?

Most online assessment systems now incorporate social networking features, and recent developments in social media spaces include protocols that allow the synchronisation and aggregation of data across multiple user profiles. In light of these advances and the concomitant fear of data sharing in secondary school education this papers provides important research findings about generic features of online social networking, which educators can use to make sound and efficient assessments in collaboration with their students and colleagues. This paper reports on a design experiment in flexible educational settings that challenges the dichotomous legacy of success and failure evident in many assessment activities for at-risk youth. Combining social networking practices with the sociology of education the paper proposes that assessment activities are best understood as a negotiable field of exchange. In this design experiment students, peers and educators engage in explicit, "front-end" assessment (Wyatt-Smith, 2008) to translate digital artefacts into institutional, and potentiality economic capital without continually referring to paper based pre-set criteria. This approach invites students and educators to use social networking functions to assess “work in progress” and final submissions in collaboration, and in doing so assessors refine their evaluative expertise and negotiate the value of student’s work from which new criteria can emerge. The mobile advantages of web-based technologies aggregate, externalise and democratise this transparent assessment model for most, if not all, student work that can be digitally represented.

Digital design communication : measuring learner technological prowess and self-efficacy in problem resolution

Currently the Bachelor of Design is the generic degree offered to the four disciplines of Architecture, Landscape Architecture, Industrial Design, and Interior Design within the School of Design at the Queensland University of Technology. Regardless of discipline, Digital Communication is a core unit taken by the 600 first year students entering the Bachelor of Design degree. Within the design disciplines the communication of the designer's intentions is achieved primarily through the use of graphic images, with written information being considered as supportive or secondary. As such, Digital Communication attempts to educate learners in the fundamentals of this graphic design communication, using a generic digital or software tool. Past iterations of the unit have not acknowledged the subtle difference in design communication of the different design disciplines involved, and has used a single generic software tool. Following a review of the unit in 2008, it was decided that a single generic software tool was no longer entirely sufficient. This decision was based on the recognition that there was an increasing emergence of discipline specific digital tools, and an expressed student desire and apparent aptitude to learn these discipline specific tools. As a result the unit was reconstructed in 2009 to offer both discipline specific and generic software instruction, if elected by the student. This paper, apart from offering the general context and pedagogy of the existing and restructured units, will more importantly offer research data that validates the changes made to the unit. Most significant of this new data is the results of surveys that authenticate actual student aptitude versus desire in learning discipline specific tools. This is done through an exposure of student self efficacy in problem resolution and technological prowess - generally and specifically within the unit. More traditional means of validation is also presented that includes the results of the generic university-wide Learning Experience Survey of the unit, as well as a comparison between the assessment results of the restructured unit versus the previous year.

Should we still lecture? Reconsidering pedagogical approaches to promote student engagement, challenging the traditional lecture

The dynamic interplay between existing learning frameworks: people, pedagogy, learning spaces and technology is challenging the traditional lecture. A paradigm is emerging from the correlation of change amongst these elements, offering new possibilities for improving the quality of the learning experience. For many universities, the design of physical learning spaces has been the focal point for blending technology and flexible learning spaces to promote learning and teaching. As the pace of technological change intensifies, affording new opportunities for engaging learners, pedagogical practice in higher education is not comparatively evolving. The resulting disparity is an opportunity for the reconsideration of pedagogical practice for increased student engagement in physical learning spaces as an opportunity for active learning. This interplay between students, staff and technology is challenging the value for students in attending physical learning spaces such as the traditional lecture. Why should students attend for classes devoted to content delivery when streaming and web technologies afford more flexible learning opportunities? Should we still lecture? Reconsideration of pedagogy is driving learning design at Queensland University of Technology, seeking new approaches affording increased student engagement via active learning experiences within large lectures. This paper provides an overview and an evaluation of one of these initiatives, Open Web Lecture (OWL), an experimental web based student response application developed by Queensland University of Technology. OWL seamlessly integrates a virtual learning environment within physical learning spaces, fostering active learning opportunities. This paper will evaluate the pilot of this initiative through consideration of effectiveness in increasing student engagement through the affordance of web enabled active learning opportunities in physical learning spaces.

Should we still lecture? Reconsidering pedagogical approaches to promote student engagement, challenging the traditional lecture

The dynamic interplay between existing learning frameworks: people, pedagogy, learning spaces and technology is challenging the traditional lecture. A paradigm is emerging from the correlation of change amongst these elements, offering new possibilities for improving the quality of the learning experience. For many universities, the design of physical learning spaces has been the focal point for blending technology and flexible learning spaces to promote learning and teaching. As the pace of technological change intensifies, affording new opportunities for engaging learners, pedagogical practice in higher education is not comparatively evolving. The resulting disparity is an opportunity for the reconsideration of pedagogical practice for increased student engagement in physical learning spaces as an opportunity for active learning. This interplay between students, staff and technology is challenging the value for students in attending physical learning spaces such as the traditional lecture. Why should students attend for classes devoted to content delivery when streaming and web technologies afford more flexible learning opportunities? Should we still lecture? Reconsideration of pedagogy is driving learning design at Queensland University of Technology, seeking new approaches affording increased student engagement via active learning experiences within large lectures. This paper provides an overview and an evaluation of one of these initiatives, Open Web Lecture (OWL), an experimental web based student response application developed by Queensland University of Technology. OWL seamlessly integrates a virtual learning environment within physical learning spaces, fostering active learning opportunities. This paper will evaluate the pilot of this initiative through consideration of effectiveness in increasing student engagement through the affordance of web enabled active learning opportunities in physical learning spaces.

Programa Espacial Brasileiro: militares, cientistas e a questão da soberania nacional

Esta tese versa sobre a análise de um dos grandes projetos tecnológicos do Estado nacional, o PEB, com o intuito de verificar em que medida o Brasil, enquanto País em desenvolvimento e inserido no processo de globalização econômica, tem a possibilidade de autodeterminar um projeto nacional de desenvolvimento relativamente soberano e sustentável, mediante sua capacitação tecnológica em áreas de ponta, como as tecnologias espaciais. Neste ínterim, é discutido o processo de institucionalização da ciência no País e a implantação de um moderno sistema de C&T no Brasil através de uma aliança entre cientistas e militares, culminando com a criação do CNPq em 1951. Apresentamos uma releitura da nossa recente história política e os projetos nacionais de desenvolvimento de que foi alvo o País, formulados pelos grupos sociais mais representativos da sociedade na época estudada, recuperando uma discussão que, estendendo-se por décadas, reservou à questão científica um lugar privilegiado no planejamento do Estado. O período da ditadura militar é especialmente contemplado, considerando-se ter sido esta a fase em que realmente o Programa Espacial Brasileiro sofreu maiores investimentos, conferindo aos militares um papel de destaque no quadro de atores sociais coletivos empenhados no projeto de desenvolvimento do País, destacando as diversas correntes ideológicas em ação dentro das Forças Armadas. Foi analisado o processo de globalização devido ao seu nexo interno e externo com as políticas científicas implantadas ou preconizadas no País. Esse processo, alavancado pela nova dinâmica tecnológica internacional iniciada nos anos 1980, estabeleceu profundos impactos e mudanças na constituição atual da esfera do político. Este é o cenário onde, de nosso ponto de vista, inscreve-se a questão da capacitação científico-tecnológica como variável estratégica em todos os níveis das relações internacionais. A compreensão desta problemática deve ser entendida como parte do cenário mundial que se configurou nas últimas décadas do século XX, tendo no entrelaçamento das dinâmicas científico-tecnológica e a soberania nacional dos Estados uma sinergia diferenciada na reordenação geopolítica contemporânea.

Diversification strategies in emerging industries: A supply network perspective

The sustainable translation of scientific and technical innovation into global products and services is key to capturing value from emerging industries. For industrial practitioners, choosing the appropriate entry mode into these industries will often determine their level of success in sharing in this value capture. © 2011 IEEE.