Implementation of a nutrition education program in a handball team; consequences on nutritional status.

OBJECTIVE: To evaluate nutritional status and dietary habits after implementation of a nutritional education program in professional handball players. RESEARCH METHODS AND PROCEDURES: Longitudinal study of 14 handball players evaluated with 72-h recall, a questionnaire on food consumption and anthropometric measures during 4 months. The intervention consisted of a nutrition education program. RESULTS: Energy intake was consistently below the recommended allowances. Macronutrient intakes as a percentage of total energy intake were below the recommended allowances for carbohydrates, and above recommended allowances for fats. Nutritional education was followed by a significant increase (p < 0.01) in total energy and macronutrient intakes, with no significant changes in macronutrient or micronutrient intakes after adjustment for energy intake. DISCUSSION: The imbalance in nutrient intake in handball players suggests that detailed re-analysis is needed to determine specific recommendations for this population. Nutritional education with continuous follow-up to monitor athletes' dietary habits may lead them to adopt appropriate nutritional habits to optimize dietary intakes. The lack of specific recommendations for micronutrient intakes in athletes leads to confusion regarding appropriate intakes; biochemical tests that yield normal values (albeit approaching cut-off values for deficiency) may disguise deficient status for some nutrients when strenuous exercise is involved. CONCLUSION: In-depth studies with nutrition education programs that include long-term follow-up are advisable to avoid deficiencies that can lead to irreversible damage in competitive athletes.

Implementation of zonal control algorithms in adaptive optical systems with sparse control matrices

Miralls deformables més i més grans, amb cada cop més actuadors estan sent utilitzats actualment en aplicacions d'òptica adaptativa. El control dels miralls amb centenars d'actuadors és un tema de gran interès, ja que les tècniques de control clàssiques basades en la seudoinversa de la matriu de control del sistema es tornen massa lentes quan es tracta de matrius de dimensions tan grans. En aquesta tesi doctoral es proposa un mètode per l'acceleració i la paral.lelitzacó dels algoritmes de control d'aquests miralls, a través de l'aplicació d'una tècnica de control basada en la reducció a zero del components més petits de la matriu de control (sparsification), seguida de l'optimització de l'ordenació dels accionadors de comandament atenent d'acord a la forma de la matriu, i finalment de la seva posterior divisió en petits blocs tridiagonals. Aquests blocs són molt més petits i més fàcils de fer servir en els càlculs, el que permet velocitats de càlcul molt superiors per l'eliminació dels components nuls en la matriu de control. A més, aquest enfocament permet la paral.lelització del càlcul, donant una com0onent de velocitat addicional al sistema. Fins i tot sense paral. lelització, s'ha obtingut un augment de gairebé un 40% de la velocitat de convergència dels miralls amb només 37 actuadors, mitjançant la tècnica proposada. Per validar això, s'ha implementat un muntatge experimental nou complet , que inclou un modulador de fase programable per a la generació de turbulència mitjançant pantalles de fase, i s'ha desenvolupat un model complert del bucle de control per investigar el rendiment de l'algorisme proposat. Els resultats, tant en la simulació com experimentalment, mostren l'equivalència total en els valors de desviació després de la compensació dels diferents tipus d'aberracions per als diferents algoritmes utilitzats, encara que el mètode proposat aquí permet una càrrega computacional molt menor. El procediment s'espera que sigui molt exitós quan s'aplica a miralls molt grans.

The relationships of organizational cultures, trust and innovativeness

Sekä organisaatiokulttuuria, luottamusta että innovatiivisuutta on tutkittu paljon, mutta toistaiseksi nämä käsitteet yhdistävää kokonaisvaltaista tutkimusta ei juuri ole tehty tai ainakaan raportoitu tieteellisissä julkaisuissa. Tätä tutkimus käsitteli organisaatiokulttuurin, luottamuksen ja innovatiivisuuden suhteita erilaisissa organisaatiokulttuureissa. Tutkimuksen tavoitteena oli tutkia organisaatiokulttuurin vaikutusta luottamukseen (sekä kompetenssiin, hyväntahtoisuuteen että rehellisyyteen perustuvaan lateraaliin, vertikaaliin ja institutionaaliseen luottamukseen), innovaatioilmastoon ja innovaatiotoiminnan tuloksellisuuteen. Organisaatiokulttuurin, luottamuksen ja innovatiivisuuden yhteyttä tarkasteltiin neljässä erityyppisessä organisaatiokulttuurissa (klaani-, adhokratia-, hierarkia- ja markkinakulttuurit), jotka pohjautuvat kilpailevien arvojen malliin. Tutkimuksen empiirinen osa toteutettiin posti ja Internet -pohjaisena kyselytutkimuksena 40 organisaatioyksikössä tilastollisen analyysin menetelmin. Yleisellä tasolla työssä saatiin selville, että luottamuksen ja innovatiivisuuden tasot vaihtelevat erityyppisissä organisaatio-kulttuureissa. Tarkemmin sanottuna klaani- ja adhokratiakulttuureissa luottamus ja innovatiivisuus olivat korkeita, ja näillä kulttuureilla oli myös positiivinen vaikutus innovaatiotoiminnan tuloksellisuuteen. Erityisesti institutionaalisen luottamuksen ja innovaatiotuen merkitykset olivat tärkeitä, sillä ne toimivat mediaattoreina organisaatiokulttuurin ja innovatiivisuuden välisessä suhteessa. Luottamuksella ja innovatiivisuudelle ei sitä vastoin ollut vaikutusta hierarkia- ja markkinakulttuureissa, tai vaikutus oli negatiivinen. Tässä työssä osoitettiin myös aiemmin hyvin vähän tutkitun institutionaalisen organisatorisen luottamuksen merkitys organisaatioiden innovatiivisuudessa.

Eligibility to treatment and economic effect of the implementation of the new U.S. or European Society of Hypertension/European Society of Cardiology hypertension guidelines.

OBJECTIVE: To evaluate the population and economic impact of implementing the new Joint National Committee (JNC) or European Society of Hypertension (ESH)/European Society of Cardiology (ESC) hypertension guidelines in the Swiss population. METHODS: Cross-sectional, population-based sample (6708 participants) collected between 2003 and 2006 in the city of Lausanne, Switzerland. Blood pressure categories were defined according to both the JNC (JNC-7 and JNC-8) and the ESH/ESC (2007 and 2013) guidelines. RESULTS: The proportion of participants aged 35-60 years eligible for drug treatment was 25.6% [95% confidence interval (CI) 24.4-26.9%] and 24.8% (95% CI 23.6-26.0%) for the JNC-7 and the JNC-8 guidelines, respectively; for participants aged 60-75 years, the values were 62.3% (95% CI 60.1-64.5%) and 46.8% (95% CI 44.5-49.0%), respectively. Shifting from the JNC-7 to the JNC-8 guidelines would lead to an annual saving of 163.6 million Swiss francs (187.7 million US dollars or 134.5 million European euro). The proportion of participants aged 35-75 years without chronic kidney disease, diabetes mellitus or reported history of cardiovascular disease and eligible for treatment was 30.2% (95% CI 29.0-31.4%) for the ESH/ESC 2007 and 2013 guidelines. For participants with chronic kidney disease, diabetes mellitus or reported history of cardiovascular disease, the values were 73.6% (95% CI 70.8-76.3%) and 55.6% (95% CI 52.5-58.8%), respectively. Shifting from the ESH/ESC 2007 to the ESH/ESC 2013 guidelines would lead to an annual saving of 86.9 million Swiss francs (99.5 million US dollars or 71.4 million European euro). CONCLUSION: In Switzerland, shifting from the JNC-7 to the JNC-8 guidelines or from the ESH/ESC 2007 to the ESH/ESC 2013 guidelines would decrease the prevalence of patients eligible for treatment and increase the percentage of treated patients within blood pressure goals. Both strategies lead to potential savings in antihypertensive drug treatment.

Experimental implementation of tightly focused beams with unpolarized transversal component at any plane

The aim of this paper is to provide a formal framework for designing highly focused fields with specific transversal features when the incoming beam is partially polarized. More specifically, we develop a field with a transversal component that remains unpolarized in the focal area. Moreover, its longitudinal component exhibits non-zero values on axis. Special attention is paid to the design of the input beam and the development of the experiment. The implementation of such fields is possible by using an interferometric setup combined with the use of digital holography techniques. Experimental results are compared with those obtained numerically.

Feasibility of industrial implementation of laser cutting into paper making machine

Laser cutting implementation possibilities into paper making machine was studied as the main objective of the work. Laser cutting technology application was considered as a replacement tool for conventional cutting methods used in paper making machines for longitudinal cutting such as edge trimming at different paper making process and tambour roll slitting. Laser cutting of paper was tested in 70’s for the first time. Since then, laser cutting and processing has been applied for paper materials with different level of success in industry. Laser cutting can be employed for longitudinal cutting of paper web in machine direction. The most common conventional cutting methods include water jet cutting and rotating slitting blades applied in paper making machines. Cutting with CO2 laser fulfils basic requirements for cutting quality, applicability to material and cutting speeds in all locations where longitudinal cutting is needed. Literature review provided description of advantages, disadvantages and challenges of laser technology when it was applied for cutting of paper material with particular attention to cutting of moving paper web. Based on studied laser cutting capabilities and problem definition of conventional cutting technologies, preliminary selection of the most promising application area was carried out. Laser cutting (trimming) of paper web edges in wet end was estimated to be the most promising area where it can be implemented. This assumption was made on the basis of rate of web breaks occurrence. It was found that up to 64 % of total number of web breaks occurred in wet end, particularly in location of so called open draws where paper web was transferred unsupported by wire or felt. Distribution of web breaks in machine cross direction revealed that defects of paper web edge was the main reason of tearing initiation and consequent web break. The assumption was made that laser cutting was capable of improvement of laser cut edge tensile strength due to high cutting quality and sealing effect of the edge after laser cutting. Studies of laser ablation of cellulose supported this claim. Linear energy needed for cutting was calculated with regard to paper web properties in intended laser cutting location. Calculated linear cutting energy was verified with series of laser cutting. Practically obtained laser energy needed for cutting deviated from calculated values. This could be explained by difference in heat transfer via radiation in laser cutting and different absorption characteristics of dry and moist paper material. Laser cut samples (both dry and moist (dry matter content about 25-40%)) were tested for strength properties. It was shown that tensile strength and strain break of laser cut samples are similar to corresponding values of non-laser cut samples. Chosen method, however, did not address tensile strength of laser cut edge in particular. Thus, the assumption of improving strength properties with laser cutting was not fully proved. Laser cutting effect on possible pollution of mill broke (recycling of trimmed edge) was carried out. Laser cut samples (both dry and moist) were tested on the content of dirt particles. The tests revealed that accumulation of dust particles on the surface of moist samples can take place. This has to be taken into account to prevent contamination of pulp suspension when trim waste is recycled. Material loss due to evaporation during laser cutting and amount of solid residues after cutting were evaluated. Edge trimming with laser would result in 0.25 kg/h of solid residues and 2.5 kg/h of lost material due to evaporation. Schemes of laser cutting implementation and needed laser equipment were discussed. Generally, laser cutting system would require two laser sources (one laser source for each cutting zone), set of beam transfer and focusing optics and cutting heads. In order to increase reliability of system, it was suggested that each laser source would have double capacity. That would allow to perform cutting employing one laser source working at full capacity for both cutting zones. Laser technology is in required level at the moment and do not require additional development. Moreover, capacity of speed increase is high due to availability high power laser sources what can support the tendency of speed increase of paper making machines. Laser cutting system would require special roll to maintain cutting. The scheme of such roll was proposed as well as roll integration into paper making machine. Laser cutting can be done in location of central roll in press section, before so-called open draw where many web breaks occur, where it has potential to improve runability of a paper making machine. Economic performance of laser cutting was done as comparison of laser cutting system and water jet cutting working in the same conditions. It was revealed that laser cutting would still be about two times more expensive compared to water jet cutting. This is mainly due to high investment cost of laser equipment and poor energy efficiency of CO2 lasers. Another factor is that laser cutting causes material loss due to evaporation whereas water jet cutting almost does not cause material loss. Despite difficulties of laser cutting implementation in paper making machine, its implementation can be beneficial. The crucial role in that is possibility to improve cut edge strength properties and consequently reduce number of web breaks. Capacity of laser cutting to maintain cutting speeds which exceed current speeds of paper making machines what is another argument to consider laser cutting technology in design of new high speed paper making machines.

Implementation of educational change in Finland: The case of the undivided basic education reform

For the past decades, educational large-scale reforms have been elaborated and implemented in many countries and often resulted in partial or complete failure. These results brought researchers to study policy processes in order to address this particular challenge. Studies on implementation processes brought to light an existing causal relationship between the implementation process and the effectiveness of a reform. This study aims to describe the implementation process of educational change in Finland, who produced efficient educational reforms over the last 50 years. The case study used for the purpose of this study is the national reform of undivided basic education (yhtenäinen peruskoulu) implemented in the end of the 1990s. Therefore, this research aims to describe how the Finnish undivided basic education reform was implemented. This research was carried out using a pluralist and structuralist approach of policy process and was analyzed according to the hybrid model of implementation process. The data were collected using a triangulation of methods, i.e. documentary research, interviews and questionnaires. The data were qualitative and were analyzed using content analysis methods. This study concludes that the undivided basic education reform was applied in a very decentralized manner, which is a reflection of the decentralized system present in Finland. Central authorities provided a clear vision of the purpose of the reform, but did not control the implementation process. They rather provided extensive support in the form of transmission of information and development of collaborative networks. Local authorities had complete autonomy in terms of decision-making and implementation process. Discussions, debates and decisions regarding implementation processes took place at the local level and included the participation of all actors present on the field. Implementation methods differ from a region to another, with is the consequence of the variation of the level of commitment of local actors but also the diversity of local realities. The reform was implemented according to existing structures and values, which means that it was in cohesion with the context in which it was implemented. These results cannot be generalized to all implementation processes of educational change in Finland but give a great insight of what could be the model used in Finland. Future studies could intent to confirm the model described here by studying other reforms that took place in Finland.

Implementation of educational change in Finland: The case of the undivided basic education reform

For the past decades, educational large-scale reforms have been elaborated and implemented in many countries and often resulted in partial or complete failure. These results brought researchers to study policy processes in order to address this particular challenge. Studies on implementation processes brought to light an existing causal relationship between the implementation process and the effectiveness of a reform. This study aims to describe the implementation process of educational change in Finland, who produced efficient educational reforms over the last 50 years. The case study used for the purpose of this study is the national reform of undivided basic education (yhtenäinen peruskoulu) implemented in the end of the 1990s. Therefore, this research aims to describe how the Finnish undivided basic education reform was implemented. This research was carried out using a pluralist and structuralist approach of policy process and was analyzed according to the hybrid model of implementation process. The data were collected using a triangulation of methods, i.e. documentary research, interviews and questionnaires. The data were qualitative and were analyzed using content analysis methods. This study concludes that the undivided basic education reform was applied in a very decentralized manner, which is a reflection of the decentralized system present in Finland. Central authorities provided a clear vision of the purpose of the reform, but did not control the implementation process. They rather provided extensive support in the form of transmission of information and development of collaborative networks. Local authorities had complete autonomy in terms of decision-making and implementation process. Discussions, debates and decisions regarding implementation processes took place at the local level and included the participation of all actors present on the field. Implementation methods differ from a region to another, with is the consequence of the variation of the level of commitment of local actors but also the diversity of local realities. The reform was implemented according to existing structures and values, which means that it was in cohesion with the context in which it was implemented. These results cannot be generalized to all implementation processes of educational change in Finland but give a great insight of what could be the model used in Finland. Future studies could intent to confirm the model described here by studying other reforms that took place in Finland.

Managing the change of organizational culture in cross-border mergers and acquisitions: The role of post-acquisition integration in organizational culture change

Over the years, cross-border mergers and acquisitions have become a popular strategic option for variety of firms. Companies often seek rapid growth through acquiring potentially valuable enterprises or attempting to enhance their organization’s profitability by merging with other firms. However, managing the change of organizational culture is a major managerial challenge as companies often confront difficulties when merging two previously autonomous organizational cultures into one, joint organizational culture. Therefore, the purpose of this study is to increase understanding related to the challenges and possibilities concerning the management of organizational culture change in cross-border mergers and acquisitions. The research question “How to manage the change of organizational culture in cross-border mergers and acquisitions?” is analysed in relation to the theories presented in this thesis regarding organizational culture, organizational change and acculturation as well as in relation with the collected empirical data. The research question is divided into three sub-questions according to the following: (1) “What is the role of organizational culture in organizations?”, (2) “How to manage organizational change in mergers and acquisitions?” and (3) “How to manage organizational culture change through acculturation?”. The thesis is conducted as a qualitative case study research including three personal interviews and one group interview. The interviews were conducted as a combination of semi-structured and unstructured interviews. Theories related to organizational culture, the management of change as well as acculturation are studied and further analysed in relation to empirical material collected by the researcher. Research findings indicate that that several factors can influence the success of managing the organizational culture change in cross-border mergers and acquisitions. Factors such as defining the preferred acculturation model prior the merger; managing the resistance of change; open communication; acknowledgement of local culture and cultural differences; involvement of personnel in change processes; as well as the formulation and implementation of comprehensive change plans proved to be important factors with relation to successful management of organizational culture change

Ontario high school sport : an investigation of organizational design and its context

In 2002, The Ontario Federation of School Athletic Associations (OFSAA) identified that in providing extracurricular sport programs schools are faced with the 'new realities' of the education system. Although research has been conducted exploring the pressures impacting the provision of extracurricular school sport (Donnelly, Mcloy, Petherick, & Safai, 2000), few studies within the field have focused on understanding extracurricular school sport from an organizational level. The focus of this study was to examine the organizational design (structure, systems, and values) of the extracurricular sport department within three Ontario high schools, as well as to understand the context within which the departments exist. A qualitative multiple case study design was adopted and three public high schools were selected from one district school board in Ontario to represent the cases under investigation. Interviews, observations and documents were used to analyze the extracurricular sport department design of each case and to better understand the context within which the departments exist. As the result of the analysis of the structure, systems and values of each case, two designs emerged- Design KT1 and Design KT2. Differences in the characteristics of design archetype KT1 and KT2 centered on the design dimension of values, and therefore this study identified that contrasting organizational values reflect differences in design types. The characteristics of the Kitchen Table archetype were found to be transferable to the sub-sector of extracurricular school sport, and therefore this research provides a springboard for further research in organizational design within the education sector of extracurricular high school sport. Interconnections were found between the data associated with the external and internal contexts within which the extracurricular sport departments exist. The analysis of the internal context indicated the important role played by organizational members in shaping the context within which the departments exist. The analysis of the external context highlighted the institutional pressures that were present within the education environment. Both political and cultural expectations related to the role of extracurricular sport within schools were visible and were subsequently used by the high schools to create legitimacy and prestige, and to access resources.

Openness and privacy in Ontario: an evaluation of the implementation of FIPPA : (The Freedom of Information and Protection of Privacy Act, 1987, Chapter 25 and Ontario Regulation 532/87) /

Since the early 1970's, Canadians have expressed many concerns about the growth of government and its impact on their daily lives. The public has requested increased access to government documents and improved protection of the personal information which is held in government files and data banks. At the same time, both academics and practitioners in the field of public administration have become more interested in the values that public servants bring to their decisions and recommendations. Certain administrative values, such as accountability and integrity, have taken on greater relative importance. The purpose of this thesis is to examine the implementation of Ontario's access and privacy law. It centres on the question of whether or not the Freedom of Information and Protection of Privacy Act, 1987, (FIPPA) has answered the demand for open access to government while at the same time protecting the personal privacy of individual citizens. It also assesses the extent to which this relatively new piece of legislation has made a difference to the people of Ontario. The thesis presents an overview of the issues of freedom of information and protection of privacy in Ontario. It begins with the evolution of the legislation and a description of the law itself. It focuses on the structures and processes which have been established to meet the procedural and administrative demands of the Act. These structures and processes are evaluated in two ways. First, the thesis evaluates how open the Ontario government has become and, second, it determines how Ill carefully the privacy rights of individuals are safeguarded. An analytical framework of administrative values is used to evaluate the overall performance of the government in these two areas. The conclusion is drawn that, overall, the Ontario government has effectively implemented the Freedom of Information and Protection of Privacy Act, particularly by providing access to most government-held documents. The protection of individual privacy has proved to be not only more difficult to achieve, but more difficult to evaluate. However, the administrative culture of the Ontario bureaucracy is shown to be committed to ensuring that the access and privacy rights of citizens are respected.

The Importance and achievement of work values and locus of control as factors in work motivation

The present research study examined the relationships in a work motivation context among perceived importance and achievement of work values, locus of control and internal work motivation. The congruence of a work value was considered to be the discrepancy between the importance of a work value and the perceived achievement of that value. The theoretical framework utilized was based on a self-perpetuating cycle of motivation which included the perceived importance and achievement of work values and internal work motivation as separate and distinct, yet interrelated factors. It was hypothesized that individuals who experienced high congruence of work values would experience higher levels of internal work motivation than individuals who had low congruence of work values. It was also hypothesized that individuals who had an internal locus of control would experience more internal work motivation individuals well, the and have higher congruence of work values than who had an external locus of control. As possibility of locus of control as a moderator between importance of work values and internal work motivation was explored. Survey data were collected from 184 managerial level employees of the XYZ company during an ongoing training session. The following instruments were employed to measure the variables: Elizur's (1984) Importance of Work Values, Hunt and Saul's (1985) Achievement of Work Values, Hatfield, Robinson and Huseman's (1975) Job Perception Scale, a modified version of Rotter's (1966) I-E Locus of Control Scale and the Internal Work Motivation Scale (Hackman & Oldham, 1980) which is a part of the Job Diagnostic Survey. The findings indicated that locus of control was not a significant factor in determining congruence between work values or internal work motivation for this sample. Furthermore, locus of control was also found not to be a moderator between the importance of work values and internal work motivation. All individuals in this study had relatively high levels of internal work motivation. However, individuals who had higher congruence of work values did have significantly higher internal work motivation than those who had low congruence of work values for a majority of the 21 values. This was particularly true for the intrinsic values which included responsibility, meaningfulness and use of abilities. In addition, the data were analysed into a hierarchy of needs to indicate possible organizational development or human resource development needs for the XYZ corporation.

Moving from values inaction to values-in-action : an exploration of how values can be managed intentionally by national sports organizations

The study examined the intentional use of National Sport Organizations' (NSOs) stated values. Positive Organizational Scholarship (POS) was applied to an Appreciative Inquiry (AI) approach of interviewing NSO senior leaders. One intention of this research was to foster a connection between academia and practitioners, and in so doing highlight the gap between values inaction and values-in-action. Data were collected from nine NSOs through multiple-case studies analysis of interview transcripts, websites, and constitutional statements. Results indicated that while the NSOs operated from a Management by Objectives (MBO) approach they were interested in exploring how Management by Values (MBV) might improve their organization's performance. Eleven themes from the case studies analysis contributed to the development of a framework. The 4-1 framework described how an NSO can progress through different stages by becoming more intentional in how they use their values. Another finding included deepening our understanding of how values are experienced within the NSO and then transferred across the entire sport. Participants also spoke about the tension that arises among their NSO' s values as well as the dominant values held by funding agents. This clash of values needs to be addressed before the tension escalates. Finally, participants expressed a desire to learn more about how values can be used more intentionally to further their organization's purpose. As such, strategies for intentionally leveraging values are also suggested. Further research should explore how helpful the 4-1 framework can be to NSOs leaders who are in the process of identifying or renewing their organization's values.

Investigation of Changes in Prescribed and Voluntary Job Roles in Community Service Delivery for People who have Intellectual Disabilities after the Implementation of the 3 Rs; Rights, Respect and Responsibility Project

The purpose of this thesis was to explore whether there is change in organizational citizenship behaviours in community agency staff following agency adoption of a rights - based service philosophy. Four community agency support staff were interviewed to investigate how residential care providers in services for persons who have intellectual disabilities describe their voluntary job related behaviours following training about human rights. The major finding was that the participants were actively engaged in displaying civic virtue, courtesy, and altruism discretionary behaviours. There was evidence of a post rights training shift in communication patterns with support staff reporting that they used language that prom,oted and advocated for human rights, and reported increased communication exchanges among persons supported by the agency, support staff and managers. Participants also suggested that the individuals they support asserted their rights more frequently and they were more active in their own life choices following rights training.

Implementation of global make to inventory strategy at BASF SE

La optimización y armonización son factores clave para tener un buen desempeño en la industria química. BASF ha desarrollado un proyecto llamada acelerador. El objetivo de este proyecto ha sido la armonización y la integración de los procesos de la cadena de suministro a nivel mundial. El proceso básico de manejo de inventarios se quedó fuera del proyecto y debía ser analizado. El departamento de manejo de inventarios en BASF SE ha estado desarrollando su propia estrategia para la definición de procesos globales de manufactura. En este trabajo se presentará un informe de las fases de la formulación de la estrategia y establecer algunas pautas para la fase de implementación que está teniendo lugar en 2012 y 2013.